Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core & protocols:

- Wrap datapath globals into net_align

Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core & protocols:

- Wrap datapath globals into net_aligned_data, to avoid false sharing

- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)

- Add SO_INQ and SCM_INQ support to AF_UNIX

- Add SIOCINQ support to AF_VSOCK

- Add TCP_MAXSEG sockopt to MPTCP

- Add IPv6 force_forwarding sysctl to enable forwarding per interface

- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB

- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users

- Convert TCP send queue handling from tasklet to BH workque

- Improve BPF iteration over TCP sockets to see each socket exactly
once

- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code

- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel
NAPI thread when threaded NAPI gets disabled. Previously thread
would stick around until ifdown due to tricky synchronization

- Allow multicast routing to take effect on locally-generated packets

- Add output interface argument for End.X in segment routing

- MCTP: add support for gateway routing, improve bind() handling

- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink

- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed

- Support NUD_PERMANENT for proxy neighbor entries

- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM

- Add sequence numbers to netconsole messages. Unregister
netconsole's console when all net targets are removed. Code
refactoring. Add a number of selftests

- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup

- Support inspecting ref_tracker state via DebugFS

- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links

- Allow providing upcall pid for the 'execute' command in openvswitch

- Remove DCCP support from Netfilter's conntrack

- Disallow multiple packet duplications in the queuing layer

- Prevent use of deprecated iptables code on PREEMPT_RT

Driver API:

- Support RSS and hashing configuration over ethtool Netlink

- Add dedicated ethtool callbacks for getting and setting hashing
fields

- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc

- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs

- Support traffic classes in devlink rate API for bandwidth
management

- Remove rtnl_lock dependency from UDP tunnel port configuration

Device drivers:

- Add a new Broadcom driver for 800G Ethernet (bnge)

- Add a standalone driver for Microchip ZL3073x DPLL

- Remove IBM's NETIUCV device driver

- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)

- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping

- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583

- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x

- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info

- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is
used by TKIP, not only WEP)
- improvements for unsolicited probe response handling

- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device

- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS

- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading"

* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
dpll: zl3073x: Fix build failure
selftests: bpf: fix legacy netfilter options
ipv6: annotate data-races around rt->fib6_nsiblings
ipv6: fix possible infinite loop in fib6_info_uses_dev()
ipv6: prevent infinite loop in rt6_nlmsg_size()
ipv6: add a retry logic in net6_rt_notify()
vrf: Drop existing dst reference in vrf_ip6_input_dst
net/sched: taprio: align entry index attr validation with mqprio
net: fsl_pq_mdio: use dev_err_probe
selftests: rtnetlink.sh: remove esp4_offload after test
vsock: remove unnecessary null check in vsock_getname()
igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
stmmac: xsk: fix negative overflow of budget in zerocopy mode
dt-bindings: ieee802154: Convert at86rf230.txt yaml format
net: dsa: microchip: Disable PTP function of KSZ8463
net: dsa: microchip: Setup fiber ports for KSZ8463
net: dsa: microchip: Write switch MAC address differently for KSZ8463
net: dsa: microchip: Use different registers for KSZ8463
net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
...

show more ...

Merge branch 'support-bandwidth-clamping-in-mana-using-net-shapers'

Erni Sri Satya Vennela says:

====================
Support bandwidth clamping in mana using net shapers

This patchset introduces

Merge branch 'support-bandwidth-clamping-in-mana-using-net-shapers'

Erni Sri Satya Vennela says:

====================
Support bandwidth clamping in mana using net shapers

This patchset introduces hardware-backed bandwidth rate limiting
for MANA NICs via the net_shaper_ops interface, enabling efficient and
fine-grained traffic shaping directly on the device.

Previously, MANA lacked a mechanism for user-configurable bandwidth
control. With this addition, users can now configure shaping parameters,
allowing better traffic management and performance isolation.

The implementation includes the net_shaper_ops callbacks in the MANA
driver and supports one shaper per vport. Add shaping support via
mana_set_bw_clamp(), allowing the configuration of bandwidth rates
in 100 Mbps increments (minimum 100 Mbps). The driver validates input
and rejects unsupported values. On failure, it restores the previous
configuration which is queried using mana_query_link_cfg() or
retains the current state.

To prevent potential deadlocks introduced by net_shaper_ops, switch to
_locked variants of NAPI APIs when netdevops_lock is held during
VF setup and teardown.

Also, Add support for ethtool get_link_ksettings to report the maximum
link speed supported by the SKU in mbps.

These APIs when invoked on hardware that are older or that do
not support these APIs, the speed would be reported as UNKNOWN and
the net-shaper calls to set speed would fail.
====================

Link: https://patch.msgid.link/1750144656-2021-1-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

net: mana: Add speed support in mana_get_link_ksettings

Allow mana ethtool get_link_ksettings operation to report
the maximum speed supported by the SKU in mbps.

The driver retrieves this informati

net: mana: Add speed support in mana_get_link_ksettings

Allow mana ethtool get_link_ksettings operation to report
the maximum speed supported by the SKU in mbps.

The driver retrieves this information by issuing a
HWC command to the hardware via mana_query_link_cfg(),
which retrieves the SKU's maximum supported speed.

These APIs when invoked on hardware that are older/do
not support these APIs, the speed would be reported as UNKNOWN.

Before:
$ethtool enP30832s1
> Settings for enP30832s1:
Supported ports: [ ]
Supported link modes: Not reported
Supported pause frame use: No
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: Unknown!
Duplex: Full
Auto-negotiation: off
Port: Other
PHYAD: 0
Transceiver: internal
Link detected: yes

After:
$ethtool enP30832s1
> Settings for enP30832s1:
Supported ports: [ ]
Supported link modes: Not reported
Supported pause frame use: No
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: 16000Mb/s
Duplex: Full
Auto-negotiation: off
Port: Other
PHYAD: 0
Transceiver: internal
Link detected: yes

Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/1750144656-2021-4-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

net: mana: Expose additional hardware counters for drop and TC via ethtool.

Add support for reporting additional hardware counters for drop and
TC using the ethtool -S interface.

These counters inc

net: mana: Expose additional hardware counters for drop and TC via ethtool.

Add support for reporting additional hardware counters for drop and
TC using the ethtool -S interface.

These counters include:

- Aggregate Rx/Tx drop counters
- Per-TC Rx/Tx packet counters
- Per-TC Rx/Tx byte counters
- Per-TC Rx/Tx pause frame counters

The counters are exposed using ethtool_ops->get_ethtool_stats and
ethtool_ops->get_strings. This feature/counters are not available
to all versions of hardware.

Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/20250609100103.GA7102@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and we are stuck at 6.9 so lets bump things forward.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.14 merge window.

Merge remote-tracking branch 'pm/opp/linux-next' into HEAD

Merge pm/opp tree to get dev_pm_opp_get_bw()

Signed-off-by: Rob Clark <robdclark@chromium.org>

Merge branch 'linus' into x86/mm, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'v6.13-rc3' into next

Sync up with the mainline.

Merge drm/drm-next into drm-intel-next

Catching up with 6.13-rc2.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge tag 'asoc-fix-v6.13-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.13

A few small fixes for v6.13, all system specific - the biggest t

Merge tag 'asoc-fix-v6.13-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.13

A few small fixes for v6.13, all system specific - the biggest thing is
the fix for jack handling over suspend on some Intel laptops.

show more ...

Merge drm/drm-next into drm-xe-next

A backmerge to get the PMT preparation work for
merging the BMG PMT support.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-misc-next

Kickstart 6.14 cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'v6.13-rc1' into perf/core, to refresh the branch

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'ovl.fixes'

Bring in an overlayfs fix for v6.13-rc1 that fixes a bug introduced by
the overlayfs changes merged for v6.13.

Signed-off-by: Christian Brauner <brauner@kernel.org>

Merge tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"The most significant set of changes is the per netns RTNL. The

Merge tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"The most significant set of changes is the per netns RTNL. The new
behavior is disabled by default, regression risk should be contained.

Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its
default value from PTP_1588_CLOCK_KVM, as the first is intended to be
a more reliable replacement for the latter.

Core:

- Started a very large, in-progress, effort to make the RTNL lock
scope per network-namespace, thus reducing the lock contention
significantly in the containerized use-case, comprising:
- RCU-ified some relevant slices of the FIB control path
- introduce basic per netns locking helpers
- namespacified the IPv4 address hash table
- remove rtnl_register{,_module}() in favour of
rtnl_register_many()
- refactor rtnl_{new,del,set}link() moving as much validation as
possible out of RTNL lock
- convert all phonet doit() and dumpit() handlers to RCU
- convert IPv4 addresses manipulation to per-netns RTNL
- convert virtual interface creation to per-netns RTNL
the per-netns lock infrastructure is guarded by the
CONFIG_DEBUG_NET_SMALL_RTNL knob, disabled by default ad interim.

- Introduce NAPI suspension, to efficiently switching between busy
polling (NAPI processing suspended) and normal processing.

- Migrate the IPv4 routing input, output and control path from direct
ToS usage to DSCP macros. This is a work in progress to make ECN
handling consistent and reliable.

- Add drop reasons support to the IPv4 rotue input path, allowing
better introspection in case of packets drop.

- Make FIB seqnum lockless, dropping RTNL protection for read access.

- Make inet{,v6} addresses hashing less predicable.

- Allow providing timestamp OPT_ID via cmsg, to correlate TX packets
and timestamps

Things we sprinkled into general kernel code:

- Add small file operations for debugfs, to reduce the struct ops
size.

- Refactoring and optimization for the implementation of page_frag
API, This is a preparatory work to consolidate the page_frag
implementation.

Netfilter:

- Optimize set element transactions to reduce memory consumption

- Extended netlink error reporting for attribute parser failure.

- Make legacy xtables configs user selectable, giving users the
option to configure iptables without enabling any other config.

- Address a lot of false-positive RCU issues, pointed by recent CI
improvements.

BPF:

- Put xsk sockets on a struct diet and add various cleanups. Overall,
this helps to bump performance by 12% for some workloads.

- Extend BPF selftests to increase coverage of XDP features in
combination with BPF cpumap.

- Optimize and homogenize bpf_csum_diff helper for all archs and also
add a batch of new BPF selftests for it.

- Extend netkit with an option to delegate skb->{mark,priority}
scrubbing to its BPF program.

- Make the bpf_get_netns_cookie() helper available also to tc(x) BPF
programs.

Protocols:

- Introduces 4-tuple hash for connected udp sockets, speeding-up
significantly connected sockets lookup.

- Add a fastpath for some TCP timers that usually expires after
close, the socket lock contention.

- Add inbound and outbound xfrm state caches to speed up state
lookups.

- Avoid sending MPTCP advertisements on stale subflows, reducing
risks on loosing them.

- Make neighbours table flushing more scalable, maintaining per
device neigh lists.

Driver API:

- Introduce a unified interface to configure transmission H/W
shaping, and expose it to user-space via generic-netlink.

- Add support for per-NAPI config via netlink. This makes napi
configuration persistent across queues removal and re-creation.
Requires driver updates, currently supported drivers are:
nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice.

- Add ethtool support for writing SFP / PHY firmware blocks.

- Track RSS context allocation from ethtool core.

- Implement support for mirroring to DSA CPU port, via TC mirror
offload.

- Consolidate FDB updates notification, to avoid duplicates on
device-specific entries.

- Expose DPLL clock quality level to the user-space.

- Support master-slave PHY config via device tree.

Tests and tooling:

- forwarding: introduce deferred commands, to simplify the cleanup
phase

Drivers:

- Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic,
Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the
IRQs and queues to NAPI IDs, allowing busy polling and better
introspection.

- Ethernet high-speed NICs:
- nVidia/Mellanox:
- mlx5:
- a large refactor to implement support for cross E-Switch
scheduling
- refactor H/W conter management to let it scale better
- H/W GRO cleanups
- Intel (100G, ice)::
- add support for ethtool reset
- implement support for per TX queue H/W shaping
- AMD/Solarflare:
- implement per device queue stats support
- Broadcom (bnxt):
- improve wildcard l4proto on IPv4/IPv6 ntuple rules
- Marvell Octeon:
- Add representor support for each Resource Virtualization Unit
(RVU) device.
- Hisilicon:
- add support for the BMC Gigabit Ethernet
- IBM (EMAC):
- driver cleanup and modernization
- Cisco (VIC):
- raise the queues number limit to 256

- Ethernet virtual:
- Google vNIC:
- implement page pool support
- macsec:
- inherit lower device's features and TSO limits when
offloading
- virtio_net:
- enable premapped mode by default
- support for XDP socket(AF_XDP) zerocopy TX
- wireguard:
- set the TSO max size to be GSO_MAX_SIZE, to aggregate larger
packets.

- Ethernet NICs embedded and virtual:
- Broadcom ASP:
- enable software timestamping
- Freescale:
- add enetc4 PF driver
- MediaTek: Airoha SoC:
- implement BQL support
- RealTek r8169:
- enable TSO by default on r8168/r8125
- implement extended ethtool stats
- Renesas AVB:
- enable TX checksum offload
- Synopsys (stmmac):
- support header splitting for vlan tagged packets
- move common code for DWMAC4 and DWXGMAC into a separate FPE
module.
- add dwmac driver support for T-HEAD TH1520 SoC
- Synopsys (xpcs):
- driver refactor and cleanup
- TI:
- icssg_prueth: add VLAN offload support
- Xilinx emaclite:
- add clock support

- Ethernet switches:
- Microchip:
- implement support for the lan969x Ethernet switch family
- add LAN9646 switch support to KSZ DSA driver

- Ethernet PHYs:
- Marvel: 88q2x: enable auto negotiation
- Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2

- PTP:
- Add support for the Amazon virtual clock device
- Add PtP driver for s390 clocks

- WiFi:
- mac80211
- EHT 1024 aggregation size for transmissions
- new operation to indicate that a new interface is to be added
- support radio separation of multi-band devices
- move wireless extension spy implementation to libiw
- Broadcom:
- brcmfmac: optional LPO clock support
- Microchip:
- add support for Atmel WILC3000
- Qualcomm (ath12k):
- firmware coredump collection support
- add debugfs support for a multitude of statistics
- Qualcomm (ath5k):
- Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
- Realtek:
- rtw88: 8821au and 8812au USB adapters support
- rtw89: add thermal protection
- rtw89: fine tune BT-coexsitence to improve user experience
- rtw89: firmware secure boot for WiFi 6 chip

- Bluetooth
- add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and
0x13d3:0x3623
- add Realtek RTL8852BE support for id Foxconn 0xe123
- add MediaTek MT7920 support for wireless module ids
- btintel_pcie: add handshake between driver and firmware
- btintel_pcie: add recovery mechanism
- btnxpuart: add GPIO support to power save feature"

* tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1475 commits)
mm: page_frag: fix a compile error when kernel is not compiled
Documentation: tipc: fix formatting issue in tipc.rst
selftests: nic_performance: Add selftest for performance of NIC driver
selftests: nic_link_layer: Add selftest case for speed and duplex states
selftests: nic_link_layer: Add link layer selftest for NIC driver
bnxt_en: Add FW trace coredump segments to the coredump
bnxt_en: Add a new ethtool -W dump flag
bnxt_en: Add 2 parameters to bnxt_fill_coredump_seg_hdr()
bnxt_en: Add functions to copy host context memory
bnxt_en: Do not free FW log context memory
bnxt_en: Manage the FW trace context memory
bnxt_en: Allocate backing store memory for FW trace logs
bnxt_en: Add a 'force' parameter to bnxt_free_ctx_mem()
bnxt_en: Refactor bnxt_free_ctx_mem()
bnxt_en: Add mem_valid bit to struct bnxt_ctx_mem_type
bnxt_en: Update firmware interface spec to 1.10.3.85
selftests/bpf: Add some tests with sockmap SK_PASS
bpf: fix recursive lock when verdict program return SK_PASS
wireguard: device: support big tcp GSO
wireguard: selftests: load nf_conntrack if not present
...

show more ...

net: mana: use ethtool string helpers

The latter is the preferred way to copy ethtool strings.

Avoids manually incrementing the data pointer.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed

net: mana: use ethtool string helpers

The latter is the preferred way to copy ethtool strings.

Avoids manually incrementing the data pointer.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Link: https://patch.msgid.link/20241022204908.511021-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge tag 'v6.12-rc3' into perf-tools-next

To get the fixes in the current perf-tools tree.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Merge wireless-next into staging-next

This merges up to commit a0efa2f362a6 ("Merge net-next/main to resolve
conflicts") from wireless-next into the staging-next branch to handle
the removal of a st

Merge wireless-next into staging-next

This merges up to commit a0efa2f362a6 ("Merge net-next/main to resolve
conflicts") from wireless-next into the staging-next branch to handle
the removal of a staging driver easier (it happened in the wireless-next
branch). That way we don't have developers confused and start
submitting changes for this driver that is now deleted.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge net-next/main to resolve conflicts

The wireless-next tree was based on something older, and there
are now conflicts between -rc2 and work here. Merge net-next,
which has enough of -rc2 for the

Merge net-next/main to resolve conflicts

The wireless-next tree was based on something older, and there
are now conflicts between -rc2 and work here. Merge net-next,
which has enough of -rc2 for the conflicts to happen, resolving
them in the process.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

Merge drm/drm-next into drm-xe-next

Backmerging to resolve a conflict with core locally.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

net: mana: Add get_link and get_link_ksettings in ethtool

Add support for the ethtool get_link and get_link_ksettings
operations. Display standard port information using ethtool.

Before the change:

net: mana: Add get_link and get_link_ksettings in ethtool

Add support for the ethtool get_link and get_link_ksettings
operations. Display standard port information using ethtool.

Before the change:
$ethtool enP30832s1
> No data available

After the change:
$ethtool enP30832s1
> Settings for enP30832s1:
Supported ports: [ ]
Supported link modes: Not reported
Supported pause frame use: No
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: Unknown!
Duplex: Full
Auto-negotiation: off
Port: Other
PHYAD: 0
Transceiver: internal
Link detected: yes

Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1727674934-12130-1-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

Merge tag 'v6.12-rc1' into clk-meson-next

Linux 6.12-rc1

Merge drm/drm-next into drm-misc-next

Get drm-misc-next to up v6.12-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next

Sync to v6.12-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>