Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
"This is the usual collection of primarily clk driver updates.

The big pa

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
"This is the usual collection of primarily clk driver updates.

The big part of the diff is all the new Qualcomm clk drivers added for
a few SoCs they're working on. The other two vendors with significant
work this cycle are Renesas and Amlogic. Renesas adds a bunch of clks
to existing drivers and supports some new SoCs while Amlogic is
starting a significant refactoring to simplify their code.

The core framework gained a pair of helpers to get the 'struct device'
or 'struct device_node' associated with a 'struct clk_hw'. Some
associated KUnit tests were added for these simple helpers as well.

Beyond that core change there are lots of little fixes throughout the
clk drivers for the stuff we see every day, wrong clk driver data that
affects tree topology or supported frequencies, etc. They're not found
until the clks are actually used by some consumer device driver.

New Drivers:
- Global, display, gpu, video, camera, tcsr, and rpmh clock
controller for the Qualcomm Milos SoC
- Camera, display, GPU, and video clock controllers for Qualcomm
QCS615
- Video clock controller driver for Qualcomm SM6350
- Camera clock controller driver for Qualcomm SC8180X
- I3C clocks and resets on Renesas RZ/G3E
- Expanded Serial Peripheral Interface (xSPI) clocks and resets on
Renesas RZ/V2H(P) and RZ/V2N
- SPI (RSPI) clocks and resets on Renesas RZ/V2H(P)
- SDHI and I2C clocks on Renesas RZ/T2H and RZ/N2H
- Ethernet clocks and resets on Renesas RZ/G3E
- Initial support for the Renesas RZ/T2H (R9A09G077) and RZ/N2H
(R9A09G087) SoCs
- Ethernet clocks and resets on Renesas RZ/V2H and RZ/V2N
- Timer, I2C, watchdog, GPU, and USB2.0 clocks and resets on Renesas
RZ/V2N

Updates:
- Support atomic PWMs in the PWM clk driver
- clk_hw_get_dev() and clk_hw_get_of_node() helpers
- Replace round_rate() with determine_rate() in various clk drivers
- Convert clk DT bindings to DT schema format for DT validation
- Various clk driver cleanups and refactorings from static analysis
tools and possibly real humans
- A lot of little fixes here and there to things like clk tree
topology, missing frequencies, flagging clks as critical, etc"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (216 commits)
clk: clocking-wizard: Fix the round rate handling for versal
clk: Fix typos
clk: spacemit: ccu_pll: fix error return value in recalc_rate callback
clk: tegra: periph: Make tegra_clk_periph_ops static
clk: tegra: periph: Fix error handling and resolve unsigned compare warning
clk: imx: scu: convert from round_rate() to determine_rate()
clk: imx: pllv4: convert from round_rate() to determine_rate()
clk: imx: pllv3: convert from round_rate() to determine_rate()
clk: imx: pllv2: convert from round_rate() to determine_rate()
clk: imx: pll14xx: convert from round_rate() to determine_rate()
clk: imx: pfd: convert from round_rate() to determine_rate()
clk: imx: frac-pll: convert from round_rate() to determine_rate()
clk: imx: fracn-gppll: convert from round_rate() to determine_rate()
clk: imx: fixup-div: convert from round_rate() to determine_rate()
clk: imx: cpu: convert from round_rate() to determine_rate()
clk: imx: busy: convert from round_rate() to determine_rate()
clk: imx: composite-93: remove round_rate() in favor of determine_rate()
clk: imx: composite-8m: remove round_rate() in favor of determine_rate()
clk: qcom: Remove redundant pm_runtime_mark_last_busy() calls
clk: imx: Remove redundant pm_runtime_mark_last_busy() calls
...

show more ...

Merge branches 'clk-bindings', 'clk-cleanup', 'clk-pwm', 'clk-hw-device', 'clk-xilinx' and 'clk-adi' into clk-next

- Support atomic PWMs in the PWM clk driver
- clk_hw_get_dev() and clk_hw_get_of_

Merge branches 'clk-bindings', 'clk-cleanup', 'clk-pwm', 'clk-hw-device', 'clk-xilinx' and 'clk-adi' into clk-next

- Support atomic PWMs in the PWM clk driver
- clk_hw_get_dev() and clk_hw_get_of_node() helpers

* clk-bindings: (30 commits)
dt-bindings: clock: convert lpc1850-cgu.txt to yaml format
dt-bindings: clock: Convert qca,ath79-pll to DT schema
dt-bindings: clock: Convert nuvoton,npcm750-clk to DT schema
dt-bindings: clock: Convert moxa,moxart-clock to DT schema
dt-bindings: clock: Convert microchip,pic32mzda-clk to DT schema
dt-bindings: clock: Convert maxim,max9485 to DT schema
dt-bindings: clock: Convert qcom,krait-cc to DT schema
dt-bindings: clock: qcom: Remove double colon from description
dt-bindings: clock: convert lpc1850-ccu.txt to yaml format
dt-bindings: clock: Convert alphascale,asm9260-clock-controller to DT schema
dt-bindings: clock: Convert marvell,armada-370-corediv-clock to DT schema
dt-bindings: clock: Convert marvell,armada-3700-periph-clock to DT schema
dt-bindings: clock: Convert marvell,mvebu-core-clock to DT schema
dt-bindings: clock: Convert marvell,berlin2-clk to DT schema
dt-bindings: clock: Convert marvell,dove-divider-clock to DT schema
dt-bindings: clock: Convert marvell,armada-3700-tbg-clock to DT schema
dt-bindings: clock: Convert marvell-armada-370-gating-clock to DT schema
dt-bindings: clock: Convert marvell,armada-xp-cpu-clock to DT schema
dt-bindings: clock: Convert TI-NSPIRE clocks to DT schema
dt-bindings: clock: Convert lsi,axm5516-clks to DT schema
...

* clk-cleanup: (29 commits)
clk: clocking-wizard: Fix the round rate handling for versal
clk: Fix typos
clk: tegra: periph: Make tegra_clk_periph_ops static
clk: tegra: periph: Fix error handling and resolve unsigned compare warning
clk: imx: scu: convert from round_rate() to determine_rate()
clk: imx: pllv4: convert from round_rate() to determine_rate()
clk: imx: pllv3: convert from round_rate() to determine_rate()
clk: imx: pllv2: convert from round_rate() to determine_rate()
clk: imx: pll14xx: convert from round_rate() to determine_rate()
clk: imx: pfd: convert from round_rate() to determine_rate()
clk: imx: frac-pll: convert from round_rate() to determine_rate()
clk: imx: fracn-gppll: convert from round_rate() to determine_rate()
clk: imx: fixup-div: convert from round_rate() to determine_rate()
clk: imx: cpu: convert from round_rate() to determine_rate()
clk: imx: busy: convert from round_rate() to determine_rate()
clk: imx: composite-93: remove round_rate() in favor of determine_rate()
clk: imx: composite-8m: remove round_rate() in favor of determine_rate()
clk: bcm: bcm2835: convert from round_rate() to determine_rate()
MAINTAINERS: Include clk.py under COMMON CLK FRAMEWORK entry
clk: ti: Simplify ti_find_clock_provider()
...

* clk-pwm:
clk: pwm: Make use of non-sleeping PWMs
clk: pwm: Don't reconfigure running PWM at probe time
clk: pwm: Convert to use pwm_apply_might_sleep()
clk: pwm: Let .get_duty_cycle() return the real duty cycle

* clk-hw-device:
clk: tests: add clk_hw_get_dev() and clk_hw_get_of_node() tests
clk: tests: Make clk_register_clk_parent_data_device_driver() common
clk: add a clk_hw helpers to get the clock device or device_node

* clk-xilinx:
clk: xilinx: vcu: Update vcu init/reset sequence
clk: xilinx: vcu: unregister pll_post only if registered correctly

* clk-adi:
clk: clk-axi-clkgen: fix coding style issues
clk: clk-axi-clkgen move to min/max()
clk: clk-axi-clkgen: detect axi_clkgen_limits at runtime
include: adi-axi-common: add new helper macros
include: linux: move adi-axi-common.h out of fpga
clk: clk-axi-clkgen: make sure to include mod_devicetable.h
clk: clk-axi-clkgen: fix fpfd_max frequency for zynq

show more ...

clk: Fix typos

Fix typos, mostly in comments except CLKGATE_SEPERATED_* (definition and
uses updated).

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20250723203

clk: Fix typos

Fix typos, mostly in comments except CLKGATE_SEPERATED_* (definition and
uses updated).

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20250723203819.2910289-1-helgaas@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Backmerging to get updates from v6.15-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'next' into for-linus

Prepare input updates for 6.15 merge window.

Merge drm/drm-next into drm-xe-next

Sync to fix conlicts between drm-xe-next and drm-intel-next.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

Merge tag 'v6.14-rc4' into next

Sync up with the mainline.

Merge drm/drm-next into drm-misc-next

Bring rc1 to start the new release dev.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'v6.14-rc1' into perf-tools-next

To get the various fixes in the current master.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync with v6.14-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and we are stuck at 6.9 so lets bump things forward.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

show more ...

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
"A pretty quiet cycle this time around. We have a bunch of new Qualcomm
cl

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
"A pretty quiet cycle this time around. We have a bunch of new Qualcomm
clk drivers, per usual, and then a handful of drivers for other SoCs.
Then the usual pile of cleanups is fairly small data fixes or
converting DT bindings to YAML so they can be validated.

No changes to the core framework besides an OF node refcount bump that
never got decremented.

New Drivers:

- 5L35023 variant of Versa 3 clock generator

- Various Qualcomm clk controllers: IPQ CMN PLL, SM6115 LPASS, SM750
global, tcsr, rpmh, and display. X Plus GPU and global. QCS615 rpmh
and MSM8937 and MSM8940 RPM.

- Qualcomm Pongo and Taycan Alpha PLLs

- Qualcomm IPQ5424 NoC-related interconnect clks

- Renesas RZ/G3E (R9A09G047) SoC clk driver

- SAMA7D65 SoC clk driver

- Samsung Exynos990 SoC clk driver"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (159 commits)
clk: analogbits: Fix incorrect calculation of vco rate delta
clk: bcm: rpi: Add disp clock
clk: bcm: rpi: Create helper to retrieve private data
clk: bcm: rpi: Enable minimize for all firmware clocks
clk: bcm: rpi: Allow cpufreq driver to also adjust gpu clocks
clk: bcm: rpi: Add ISP to exported clocks
clk: stm32f4: support spread spectrum clock generation
clk: stm32f4: use FIELD helpers to access the PLLCFGR fields
dt-bindings: clock: st,stm32-rcc: support spread spectrum clocking
dt-bindings: clock: convert stm32 rcc bindings to json-schema
clk: Use str_enable_disable-like helpers
clk: clk-loongson2: Fix the number count of clk provider
clk: clk-loongson2: Switch to use devm_clk_hw_register_fixed_rate_parent_data()
clk: starfive: Make _clk_get become a common helper function
clk: en7523: Add clock for eMMC for EN7581
dt-bindings: clock: add ID for eMMC for EN7581
dt-bindings: clock: drop NUM_CLOCKS define for EN7581
clk: en7523: Rework clock handling for different clock numbers
clk: thead: Fix cpu2vp_clk for TH1520 AP_SUBSYS clocks
clk: thead: Add CLK_IGNORE_UNUSED to fix TH1520 boot
...

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.14 merge window.

clk: starfive: Make _clk_get become a common helper function

Introduce num_reg to store the number of clocks, this helps to make
_clk_get become a common helper function which called jh71x0_clk_get(

clk: starfive: Make _clk_get become a common helper function

Introduce num_reg to store the number of clocks, this helps to make
_clk_get become a common helper function which called jh71x0_clk_get().
With this, it helps to simplify the code and extend the code in the
future.

Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Link: https://lore.kernel.org/r/20250114081300.36600-1-changhuang.liang@starfivetech.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

show more ...

Merge tag 'v6.13-rc3' into next

Sync up with the mainline.

Merge tag 'v6.12-rc3' into perf-tools-next

To get the fixes in the current perf-tools tree.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Merge tag 'v6.12-rc1' into clk-meson-next

Linux 6.12-rc1

Merge drm/drm-next into drm-xe-next

Sync with drm-misc and drm-intel-next for common APIs and refactors.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

Merge drm/drm-next into drm-intel-next

Sync the branches to resolve the conflict reported in the below link.

Link: https://lore.kernel.org/r/20240906131502.7a7d1962@canb.auug.org.au
Signed-off-by:

Merge drm/drm-next into drm-intel-next

Sync the branches to resolve the conflict reported in the below link.

Link: https://lore.kernel.org/r/20240906131502.7a7d1962@canb.auug.org.au
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to get fixes from v6.12-rc7.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'asoc-fix-v6.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.12

A bunch of fixes here that came in during the merge window and t

Merge tag 'asoc-fix-v6.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.12

A bunch of fixes here that came in during the merge window and the first
week of release, plus some new quirks and device IDs. There's nothing
major here, it's a bit bigger than it might've been due to there being
no fixes sent during the merge window due to your vacation.

show more ...

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Required for a panthor fix that broke when
FOP_UNSIGNED_OFFSET was added in place of FMODE_UNSIGNED_OFFSET.

Signed-off-by: Maarten L

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Required for a panthor fix that broke when
FOP_UNSIGNED_OFFSET was added in place of FMODE_UNSIGNED_OFFSET.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

show more ...

Merge tag 'i2c-host-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow

The DesignWare and the Renesas I2C drivers have received most of
the changes in t

Merge tag 'i2c-host-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow

The DesignWare and the Renesas I2C drivers have received most of
the changes in this pull request.

The first has has undergone through a series of cleanups that
have been sent to the mailing list a year ago for the first time
and finally get merged in this pull request. They are many, from
typos (e.g. i2/i2c), to cosmetics, to refactoring (e.g. move
inline functions to librarieas) and many others.

Besides that, all the DesignWare Kconfig options have been
grouped under the I2C_DESIGNWARE_CORE and this required some
adaptation in many of the kernel configuration files for
different arm and mips boards.

Follows the list of the rest of the changes grouped by type of
change.

Cleanups
--------
The Qualcomm Geni platform improves the exit path in the runtime
resume function.

The Intel LJCA driver loses "target_addr" parameter in
ljca_i2c_stop() because it was unused.

The MediaTek controller intializes the restart_flag in the
transfer function using the ternary conditional operator ("? :")
instead of initializing it in different parts.

Constified a few global data structures in the virtio driver.

The Renesas driver simplifies the bus speed handling in the init
function making it more readable.

Improved an if/else statement in probe function of the Renesas
R-Car driver.

The iMX/MXC driver switches to using the RUNTIME_PM_OPS() instead
of SET_RUNTIME_PM_OPS().

Still in the iMX/MXC driver a comma ',' has been replaced by a
semicolon ';', while in different drivers the ',' has been
removed from the '{ }' delimiters.

Finally three devm_clk_get_enabled() have been used to simplify
the devm_clk_get/clk_prepare_enable tuple in the Renesas EMEV2,
Ingenic and MPC drivers.

Refactors
---------
The Nuvoton fixes a potential out of boundary array access. This
is not a bug fix because the issue could never occur due to
hardware not having the properties listed in the array. The
change makes the driver more future proof and, at the same time,
silences code analyzers.

Improvements
------------
The Renesas I2C (riic) driver undergoes several patches improving
the runtime power management handling.

The Intel i801 driver uses a more descriptive adapter's name to
show the presence of the IDF feature.

In the Intel Denverton (ismt) adapter the pending transactions
are killed when irq's can't complete their handling, triggering a
timeout. This could have been considered as a bug fix, but
because, standing to Vasily, it's very sporadic, I preferred
considering the patch rather as an improvement.

New Feature
-----------
The Renesas I2C (riic) driver now supports the fast mode plus.

New support
-----------
Added support for:

- Renesas R9A08G045
- Rockchip RK3576
- KEBA I2C
- Theobroma Systems Mule Multiplexer.

The Keba comes with a new driver, i2c-keba.c.
The Mule is an i2c multiplexer and it also comes with a new
driver, mux/i2c-mux-mule.c.

Core patch
----------
This pull request includes also a patch in the I2C framework, in
i2c-core-base.c where the runtime PM functions have been replaced
in order to allow to be accessed during the device add.

Devicetree
----------
Some cleanups in the devicetree, as well. nVidia and Qualcomm
bindings improve their "if:then:" blocks. While the aspeed
binding loses the "multi-master" property because it was
redundant.

The i2c-sprd binding has been converted to YAML.

show more ...

Merge tag 'v6.11' into for-6.12/block

Merge in 6.11 final to get the fix for preventing deadlocks on an
elevator switch, as there's a fixup for that patch.

* tag 'v6.11': (1788 commits)
Linux 6.1

Merge tag 'v6.11' into for-6.12/block

Merge in 6.11 final to get the fix for preventing deadlocks on an
elevator switch, as there's a fixup for that patch.

* tag 'v6.11': (1788 commits)
Linux 6.11
Revert "KVM: VMX: Always honor guest PAT on CPUs that support self-snoop"
pinctrl: pinctrl-cy8c95x0: Fix regcache
cifs: Fix signature miscalculation
mm: avoid leaving partial pfn mappings around in error case
drm/xe/client: add missing bo locking in show_meminfo()
drm/xe/client: fix deadlock in show_meminfo()
drm/xe/oa: Enable Xe2+ PES disaggregation
drm/xe/display: fix compat IS_DISPLAY_STEP() range end
drm/xe: Fix access_ok check in user_fence_create
drm/xe: Fix possible UAF in guc_exec_queue_process_msg
drm/xe: Remove fence check from send_tlb_invalidation
drm/xe/gt: Remove double include
net: netfilter: move nf flowtable bpf initialization in nf_flow_table_module_init()
PCI: Fix potential deadlock in pcim_intx()
workqueue: Clear worker->pool in the worker thread context
net: tighten bad gso csum offset check in virtio_net_hdr
netlink: specs: mptcp: fix port endianness
net: dpaa: Pad packets to ETH_ZLEN
mptcp: pm: Fix uaf in __timer_delete_sync
...

show more ...

Merge tag 'i2c-host-fixes-6.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current

The Aspeed driver tracks the controller's state (stop, pending,
start, etc.

Merge tag 'i2c-host-fixes-6.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current

The Aspeed driver tracks the controller's state (stop, pending,
start, etc.). Previously, when the stop command was sent, the
state was not updated. The fix in this pull request ensures the
driver's state is aligned with the device status.

The Intel SCH driver receives a new look, and among the cleanups,
there is a fix where, due to an oversight, an if/else statement
was missing the else, causing it to move forward instead of
exiting the function in case of an error.

The Qualcomm GENI I2C driver adds the IRQF_NO_AUTOEN flag to the
IRQ setup to prevent unwanted interrupts during probe.

The Xilinx XPS controller fixes TX FIFO handling to avoid missed
NAKs. Another fix ensures the controller is reinitialized when
the bus appears busy.

show more ...