Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
"This is the usual collection of primarily clk driver updates.

The big pa

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
"This is the usual collection of primarily clk driver updates.

The big part of the diff is all the new Qualcomm clk drivers added for
a few SoCs they're working on. The other two vendors with significant
work this cycle are Renesas and Amlogic. Renesas adds a bunch of clks
to existing drivers and supports some new SoCs while Amlogic is
starting a significant refactoring to simplify their code.

The core framework gained a pair of helpers to get the 'struct device'
or 'struct device_node' associated with a 'struct clk_hw'. Some
associated KUnit tests were added for these simple helpers as well.

Beyond that core change there are lots of little fixes throughout the
clk drivers for the stuff we see every day, wrong clk driver data that
affects tree topology or supported frequencies, etc. They're not found
until the clks are actually used by some consumer device driver.

New Drivers:
- Global, display, gpu, video, camera, tcsr, and rpmh clock
controller for the Qualcomm Milos SoC
- Camera, display, GPU, and video clock controllers for Qualcomm
QCS615
- Video clock controller driver for Qualcomm SM6350
- Camera clock controller driver for Qualcomm SC8180X
- I3C clocks and resets on Renesas RZ/G3E
- Expanded Serial Peripheral Interface (xSPI) clocks and resets on
Renesas RZ/V2H(P) and RZ/V2N
- SPI (RSPI) clocks and resets on Renesas RZ/V2H(P)
- SDHI and I2C clocks on Renesas RZ/T2H and RZ/N2H
- Ethernet clocks and resets on Renesas RZ/G3E
- Initial support for the Renesas RZ/T2H (R9A09G077) and RZ/N2H
(R9A09G087) SoCs
- Ethernet clocks and resets on Renesas RZ/V2H and RZ/V2N
- Timer, I2C, watchdog, GPU, and USB2.0 clocks and resets on Renesas
RZ/V2N

Updates:
- Support atomic PWMs in the PWM clk driver
- clk_hw_get_dev() and clk_hw_get_of_node() helpers
- Replace round_rate() with determine_rate() in various clk drivers
- Convert clk DT bindings to DT schema format for DT validation
- Various clk driver cleanups and refactorings from static analysis
tools and possibly real humans
- A lot of little fixes here and there to things like clk tree
topology, missing frequencies, flagging clks as critical, etc"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (216 commits)
clk: clocking-wizard: Fix the round rate handling for versal
clk: Fix typos
clk: spacemit: ccu_pll: fix error return value in recalc_rate callback
clk: tegra: periph: Make tegra_clk_periph_ops static
clk: tegra: periph: Fix error handling and resolve unsigned compare warning
clk: imx: scu: convert from round_rate() to determine_rate()
clk: imx: pllv4: convert from round_rate() to determine_rate()
clk: imx: pllv3: convert from round_rate() to determine_rate()
clk: imx: pllv2: convert from round_rate() to determine_rate()
clk: imx: pll14xx: convert from round_rate() to determine_rate()
clk: imx: pfd: convert from round_rate() to determine_rate()
clk: imx: frac-pll: convert from round_rate() to determine_rate()
clk: imx: fracn-gppll: convert from round_rate() to determine_rate()
clk: imx: fixup-div: convert from round_rate() to determine_rate()
clk: imx: cpu: convert from round_rate() to determine_rate()
clk: imx: busy: convert from round_rate() to determine_rate()
clk: imx: composite-93: remove round_rate() in favor of determine_rate()
clk: imx: composite-8m: remove round_rate() in favor of determine_rate()
clk: qcom: Remove redundant pm_runtime_mark_last_busy() calls
clk: imx: Remove redundant pm_runtime_mark_last_busy() calls
...

show more ...

Merge branches 'clk-rockchip', 'clk-thead', 'clk-microchip', 'clk-imx' and 'clk-qcom' into clk-next

* clk-rockchip:
clk: rockchip: rk3568: Add PLL rate for 132MHz

* clk-thead:
clk: thead: th152

Merge branches 'clk-rockchip', 'clk-thead', 'clk-microchip', 'clk-imx' and 'clk-qcom' into clk-next

* clk-rockchip:
clk: rockchip: rk3568: Add PLL rate for 132MHz

* clk-thead:
clk: thead: th1520-ap: Describe mux clocks with clk_mux
clk: thead: th1520-ap: Correctly refer the parent of osc_12m
clk: thead: Mark essential bus clocks as CLK_IGNORE_UNUSED

* clk-microchip:
clk: at91: sam9x7: update pll clk ranges

* clk-imx:
MAINTAINERS: Update i.MX Clock Entry
clk: imx95-blk-ctl: Add clock for i.MX94 LVDS/Display CSR
clk: imx95-blk-ctl: Rename lvds and displaymix csr blk
clk: imx95-blk-ctl: Fix synchronous abort
dt-bindings: clock: Add support for i.MX94 LVDS/DISPLAY CSR
clk: imx: Fix an out-of-bounds access in dispmix_csr_clk_dev_data

* clk-qcom: (65 commits)
dt-bindings: clock: qcom,sm4450-dispcc: Reference qcom,gcc.yaml
dt-bindings: clock: qcom,sm4450-camcc: Reference qcom,gcc.yaml
dt-bindings: clock: qcom,mmcc: Reference qcom,gcc.yaml
dt-bindings: clock: qcom,sm8150-camcc: Reference qcom,gcc.yaml
dt-bindings: clock: qcom: Remove double colon from description
clk: qcom: Add Video Clock controller (VIDEOCC) driver for Milos
dt-bindings: clock: qcom: document the Milos Video Clock Controller
clk: qcom: Add Graphics Clock controller (GPUCC) driver for Milos
dt-bindings: clock: qcom: document the Milos GPU Clock Controller
clk: qcom: Add Display Clock controller (DISPCC) driver for Milos
dt-bindings: clock: qcom: document the Milos Display Clock Controller
clk: qcom: Add Camera Clock controller (CAMCC) driver for Milos
dt-bindings: clock: qcom: document the Milos Camera Clock Controller
clk: qcom: Add Global Clock controller (GCC) driver for Milos
dt-bindings: clock: qcom: document the Milos Global Clock Controller
clk: qcom: common: Add support to register rcg dfs in qcom_cc_really_probe
clk: qcom: gcc-x1e80100: Add missing video resets
dt-bindings: clock: qcom,x1e80100-gcc: Add missing video resets
clk: qcom: videocc-sm8550: Add separate frequency tables for X1E80100
clk: qcom: videocc-sm8550: Allow building without SM8550/SM8560 GCC
...

show more ...

Merge tag 'qcom-clk-for-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into clk-qcom

Pull Qualcomm clk driver updates from Bjorn Andersson:

- Add global, display, gpu, video,

Merge tag 'qcom-clk-for-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into clk-qcom

Pull Qualcomm clk driver updates from Bjorn Andersson:

- Add global, display, gpu, video, camera, tcsr, and rpmh clock controller
for the Qualcomm Milos SoC
- Add camera, display, GPU, and video clock controllers for
Qualcomm QCS615
- Add the video clock controller for Qualcomm SM6350
- Add a camera clock controller driver for Qualcomm SC8180X
- Move Qualcomm PLL configuration to really probe across a
variety of platforms, in order to handle the clock controllers
powered by multiple power domains.
- Replace round_rate() with determine_rate() across the Qualcomm clock
implementations
- Enable GDSC hardware control for video clock controller GDSCs
in a few platforms.
- Fix GE PHY reset on Qualcomm IPQ5018, broken NSS port6
frequency table on Qualcomm IPQ8074, add missing video resets
on Qualcomm X1E80100 and keep the XO clock always on on
Qualcomm IPQ5018.

* tag 'qcom-clk-for-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (65 commits)
dt-bindings: clock: qcom,sm4450-dispcc: Reference qcom,gcc.yaml
dt-bindings: clock: qcom,sm4450-camcc: Reference qcom,gcc.yaml
dt-bindings: clock: qcom,mmcc: Reference qcom,gcc.yaml
dt-bindings: clock: qcom,sm8150-camcc: Reference qcom,gcc.yaml
dt-bindings: clock: qcom: Remove double colon from description
clk: qcom: Add Video Clock controller (VIDEOCC) driver for Milos
dt-bindings: clock: qcom: document the Milos Video Clock Controller
clk: qcom: Add Graphics Clock controller (GPUCC) driver for Milos
dt-bindings: clock: qcom: document the Milos GPU Clock Controller
clk: qcom: Add Display Clock controller (DISPCC) driver for Milos
dt-bindings: clock: qcom: document the Milos Display Clock Controller
clk: qcom: Add Camera Clock controller (CAMCC) driver for Milos
dt-bindings: clock: qcom: document the Milos Camera Clock Controller
clk: qcom: Add Global Clock controller (GCC) driver for Milos
dt-bindings: clock: qcom: document the Milos Global Clock Controller
clk: qcom: common: Add support to register rcg dfs in qcom_cc_really_probe
clk: qcom: gcc-x1e80100: Add missing video resets
dt-bindings: clock: qcom,x1e80100-gcc: Add missing video resets
clk: qcom: videocc-sm8550: Add separate frequency tables for X1E80100
clk: qcom: videocc-sm8550: Allow building without SM8550/SM8560 GCC
...

show more ...

clk: qcom: dispcc-sm8750: Fix setting rate byte and pixel clocks

On SM8750 the setting rate of pixel and byte clocks, while the parent
DSI PHY PLL, fails with:

disp_cc_mdss_byte0_clk_src: rcg did

clk: qcom: dispcc-sm8750: Fix setting rate byte and pixel clocks

On SM8750 the setting rate of pixel and byte clocks, while the parent
DSI PHY PLL, fails with:

disp_cc_mdss_byte0_clk_src: rcg didn't update its configuration.

DSI PHY PLL has to be unprepared and its "PLL Power Down" bits in
CMN_CTRL_0 asserted.

Mark these clocks with CLK_OPS_PARENT_ENABLE to ensure the parent is
enabled during rate changes.

Cc: stable@vger.kernel.org
Fixes: f1080d8dab0f ("clk: qcom: dispcc-sm8750: Add SM8750 Display clock controller")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250520090741.45820-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.16 merge window.

Merge drm/drm-next into drm-intel-gt-next

Need to pull in a67221b5eb8d ("drm/i915/dp: Return min bpc supported by source instead of 0")
in order to fix build breakage on GCC 9.4.0 (from Ubuntu 20.04

Merge drm/drm-next into drm-intel-gt-next

Need to pull in a67221b5eb8d ("drm/i915/dp: Return min bpc supported by source instead of 0")
in order to fix build breakage on GCC 9.4.0 (from Ubuntu 20.04).

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Backmerge to sync with v6.15-rc, xe, and specifically async flip changes
in drm-misc.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge tag 'v6.15-rc6' into next

Sync up with mainline to bring in xpad controller changes.

Merge remote-tracking branch 'drm-misc/drm-misc-next' into msm-next

Merge drm-misc-next to get commit Fixes: fec450ca15af ("drm/display:
hdmi: provide central data authority for ACR params").

Signe

Merge remote-tracking branch 'drm-misc/drm-misc-next' into msm-next

Merge drm-misc-next to get commit Fixes: fec450ca15af ("drm/display:
hdmi: provide central data authority for ACR params").

Signed-off-by: Rob Clark <robdclark@chromium.org>

show more ...

Merge drm/drm-next into drm-xe-next

Backmerge to bring in linux 6.15-rc.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge tag 'v6.15-rc1' into x86/cpu, to refresh the branch with upstream changes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'v6.15-rc1' into x86/asm, to refresh the branch

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge drm/drm-fixes into drm-misc-fixes

Backmerging to get updates from v6.15-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.15-rc1 into drm-misc-next. Also fixes a
build issue when enabling CONFIG_DRM_SCHED_KUNIT_TEST.

Signed-off-by: Thomas Zimmermann <tzimmerm

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.15-rc1 into drm-misc-next. Also fixes a
build issue when enabling CONFIG_DRM_SCHED_KUNIT_TEST.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.15 merge window.

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
"Here's the pile of clk driver patches. The usual suspects^Wsilicon
vendor

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
"Here's the pile of clk driver patches. The usual suspects^Wsilicon
vendors are all here, adding new SoC support and fixing existing code.

There are a few patches to the clk framework here as well. They've
been baking in linux-next for weeks so I'm hoping we don't have to
revert them. The disable OF node patch is probably the scariest one
although it seems unlikely that a system would be relying on a driver
_not_ probing because the clk never appeared, but you never know.

Nothing looks out of the ordinary on the driver side but that's
because it's mostly a bunch of data.

Core:
- Use dev_err_probe() in the clk registration path (Peering into the
crystal ball shows many patches that remove printks)
- Check for disabled OF nodes in of_clk_get_hw_from_clkspec()

New Drivers:
- Allwinner A523/T527 clk driver
- Qualcomm IPQ9574 NSS clk driver
- Qualcomm QCS8300 GPU and video clk drivers
- Qualcomm SDM429 RPM clks
- Qualcomm QCM6490 LPASS (low power audio) resets
- Samsung Exynos2200: driver for several clock controllers (Alive,
CMGP, HSI, PERIC/PERIS, TOP, UFS and VFS)
- Samsung Exynos7870: Driver for several clock controllers (Alive,
MIF, DISP AUD, FSYS, G3D, ISP, MFC and PERI)
- Rockchip rk3528 and rk3562 clk driver

Updates:
- Various fixes to SoC clk drivers for incorrect data, avoid touching
protected registers, etc.
- Additions for some missing clks in existing SoC clk drivers
- DT schema conversions from text to YAML
- Kconfig cleanups to allow drivers to be compiled on moar
architectures"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (125 commits)
clk: qcom: Add NSS clock Controller driver for IPQ9574
clk: qcom: gcc-ipq9574: Add support for gpll0_out_aux clock
dt-bindings: clock: Add ipq9574 NSSCC clock and reset definitions
dt-bindings: clock: gcc-ipq9574: Add definition for GPLL0_OUT_AUX
clk: qcom: gcc-msm8953: fix stuck venus0_core0 clock
clk: qcom: mmcc-sdm660: fix stuck video_subcore0 clock
dt-bindings: clock: qcom,x1e80100-camcc: Fix the list of required-opps
clk: amlogic: a1: fix a typo
clk: amlogic: gxbb: drop non existing 32k clock parent
clk: amlogic: gxbb: drop incorrect flag on 32k clock
clk: amlogic: g12b: fix cluster A parent data
clk: amlogic: g12a: fix mmc A peripheral clock
dt-bindings: clocks: atmel,at91rm9200-pmc: add missing compatibles
dt-bindings: reset: fix double id on rk3562-cru reset ids
drivers: clk: qcom: ipq5424: fix the freq table of sdcc1_apps clock
clk: qcom: lpassaudiocc-sc7280: Add support for LPASS resets for QCM6490
dt-bindings: clock: qcom: Add compatible for QCM6490 boards
clk: qcom: gdsc: Update the status poll timeout for GDSC
clk: qcom: gdsc: Set retain_ff before moving to HW CTRL
clk: davinci: remove support for da830
...

show more ...

Merge tag 'riscv-mw1-6.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/alexghiti/linux into for-next

riscv patches for 6.15-rc1

* A bunch of fixes:
- We were missing a secondary mmu

Merge tag 'riscv-mw1-6.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/alexghiti/linux into for-next

riscv patches for 6.15-rc1

* A bunch of fixes:
- We were missing a secondary mmu notifier call when flushing the tlb which is required for IOMMU
- Fix ftrace panics by saving the registers as expected by ftrace
- Fix a couple of stimecmp usage related to cpu hotplug
- Fix a bunch of issues in the misaligned probing handling

* Perf improvements:
- Introduce support for runtime constant improving perf of d_hash()
- Add support for huge pfnmaps to improve tlb utilization
- Use Zawrs to improve smp_cond_load8/16() used by the queued spinlocks

* Hwprobe additions:
- Add support for Zicntr and Zihpm
- Add support for Zaamo and Zalrsc
- Add support for bfloat16 extensiosn
- Add support for Zicbom (only enabling clean and flush, not inval for security reasons)

* Misc:
- Add a kernel parameter to bypass the misaligned speed probing since we can't rely on Zicclsm

* tag 'riscv-mw1-6.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/alexghiti/linux: (1585 commits)
riscv: Add runtime constant support
riscv: Move nop definition to insn-def.h
Documentation/kernel-parameters: Add riscv unaligned speed parameters
riscv: Add parameter for skipping access speed tests
riscv: Fix set up of vector cpu hotplug callback
riscv: Fix set up of cpu hotplug callbacks
riscv: Change check_unaligned_access_speed_all_cpus to void
riscv: Fix check_unaligned_access_all_cpus
riscv: Fix riscv_online_cpu_vec
riscv: Annotate unaligned access init functions
KVM: riscv: selftests: Add Zaamo/Zalrsc extensions to get-reg-list test
RISC-V: KVM: Allow Zaamo/Zalrsc extensions for Guest/VM
riscv: hwprobe: export Zaamo and Zalrsc extensions
riscv: add parsing for Zaamo and Zalrsc extensions
dt-bindings: riscv: add Zaamo and Zalrsc ISA extension description
riscv: fgraph: Fix stack layout to match __arch_ftrace_regs argument of ftrace_return_to_handler
riscv: fgraph: Select HAVE_FUNCTION_GRAPH_TRACER depends on HAVE_DYNAMIC_FTRACE_WITH_ARGS
riscv: Fix missing __free_pages() in check_vector_unaligned_access()
riscv: Fix the __riscv_copy_vec_words_unaligned implementation
riscv: mm: Don't use %pK through printk
...

show more ...

Merge branches 'clk-allwinner', 'clk-amlogic' and 'clk-qcom' into clk-next

* clk-allwinner:
clk: sunxi-ng: add support for the A523/T527 PRCM CCU
clk: sunxi-ng: a523: add reset lines
clk: sunx

Merge branches 'clk-allwinner', 'clk-amlogic' and 'clk-qcom' into clk-next

* clk-allwinner:
clk: sunxi-ng: add support for the A523/T527 PRCM CCU
clk: sunxi-ng: a523: add reset lines
clk: sunxi-ng: a523: add bus clock gates
clk: sunxi-ng: a523: remaining mod clocks
clk: sunxi-ng: a523: add USB mod clocks
clk: sunxi-ng: a523: add interface mod clocks
clk: sunxi-ng: a523: add system mod clocks
clk: sunxi-ng: a523: add video mod clocks
clk: sunxi-ng: a523: Add support for bus clocks
clk: sunxi-ng: Add support for the A523/T527 CCU PLLs
dt-bindings: clk: sunxi-ng: document two Allwinner A523 CCUs
clk: sunxi-ng: Add support for update bit
clk: sunxi-ng: mp: provide wrappers for setting feature flags
clk: sunxi-ng: mp: introduce dual-divider clock
clk: sunxi-ng: h616: Reparent GPU clock during frequency changes
clk: sunxi-ng: h616: Add clock/reset for LCD TCON
dt-bindings: clock: sun50i-h616-ccu: Add LCD TCON clk and reset

* clk-amlogic:
clk: amlogic: a1: fix a typo
clk: amlogic: gxbb: drop non existing 32k clock parent
clk: amlogic: gxbb: drop incorrect flag on 32k clock
clk: amlogic: g12b: fix cluster A parent data
clk: amlogic: g12a: fix mmc A peripheral clock

* clk-qcom: (41 commits)
clk: qcom: Add NSS clock Controller driver for IPQ9574
clk: qcom: gcc-ipq9574: Add support for gpll0_out_aux clock
dt-bindings: clock: Add ipq9574 NSSCC clock and reset definitions
dt-bindings: clock: gcc-ipq9574: Add definition for GPLL0_OUT_AUX
clk: qcom: gcc-msm8953: fix stuck venus0_core0 clock
clk: qcom: mmcc-sdm660: fix stuck video_subcore0 clock
dt-bindings: clock: qcom,x1e80100-camcc: Fix the list of required-opps
drivers: clk: qcom: ipq5424: fix the freq table of sdcc1_apps clock
clk: qcom: lpassaudiocc-sc7280: Add support for LPASS resets for QCM6490
dt-bindings: clock: qcom: Add compatible for QCM6490 boards
clk: qcom: gdsc: Update the status poll timeout for GDSC
clk: qcom: gdsc: Set retain_ff before moving to HW CTRL
clk: qcom: gcc-sm8650: Do not turn off USB GDSCs during gdsc_disable()
clk: qcom: videocc: Constify 'struct qcom_cc_desc'
clk: qcom: gpucc: Constify 'struct qcom_cc_desc'
clk: qcom: dispcc: Constify 'struct qcom_cc_desc'
clk: qcom: camcc: Constify 'struct qcom_cc_desc'
dt-bindings: clock: qcom: sm8450-camcc: Remove qcom,x1e80100-camcc leftover
clk: qcom: Add support for Video Clock Controller on QCS8300
clk: qcom: Add support for GPU Clock Controller on QCS8300
...

show more ...

Merge tag 'i2c-host-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow

i2c-host updates for v6.15

Refactoring and cleanups
- octeon, cadence, i801, pa

Merge tag 'i2c-host-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow

i2c-host updates for v6.15

Refactoring and cleanups
- octeon, cadence, i801, pasemi, mlxbf, bcm-iproc: general
refactorings
- octeon: remove 10-bit address support

Improvements
- amd-asf: improved error handling
- designware: use guard(mutex)
- amd-asf, designware: update naming to follow latest specs
- cadence: fix cleanup path in probe
- i801: use MMIO and I/O mapping helpers to access registers
- pxa: handle error after clk_prepare_enable

New features
- added i2c_10bit_addr_*_from_msg() and updated multiple drivers
- omap: added multiplexer state handling
- qcom-geni: update frequency configuration
- qup: introduce DMA usage policy

New hardware support
- exynos: add support for Samsung exynos7870
- k1: add support for spacemit k1 (new driver)
- imx: add support for i.mx94 lpi2c
- rk3x: add support for rk3562

Multiplexers
- ltc4306, reg: fix assignment in platform_driver structure

show more ...

Merge tag 'qcom-clk-for-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into clk-qcom

Pull Qualcomm clk driver updates from Bjorn Andersson:

- Support associating GDSCs with mu

Merge tag 'qcom-clk-for-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into clk-qcom

Pull Qualcomm clk driver updates from Bjorn Andersson:

- Support associating GDSCs with multiple power domains
- Add Qualcomm IPQ9574 NSS clk driver
- Add Qualcomm QCS8300 GPU and video clk drivers
- Add Qualcomm SDM429 RPM clks
- Add Qualcomm QCM6490 LPASS (low power audio) resets
- Fix halt check of voted branch clks
- Properly park Qualcomm SM8250 camera clks
- Add SDCC rests to Qualcomm SDM660
- Fix Qualcomm SM8750 regmap to skip protected registers
- Retain state for Qualcomm's SM8650 USB hardware when powered down
- Remove GPU AHB and dispaly XO clks from Qualcomm X Elite clk driver
- Update UART frequency table on Qualcomm IPQ5424 to fix flow control
- Allow Qualcomm IPQ5018 GCC driver to be compiled on arm32

* tag 'qcom-clk-for-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (41 commits)
clk: qcom: Add NSS clock Controller driver for IPQ9574
clk: qcom: gcc-ipq9574: Add support for gpll0_out_aux clock
dt-bindings: clock: Add ipq9574 NSSCC clock and reset definitions
dt-bindings: clock: gcc-ipq9574: Add definition for GPLL0_OUT_AUX
clk: qcom: gcc-msm8953: fix stuck venus0_core0 clock
clk: qcom: mmcc-sdm660: fix stuck video_subcore0 clock
dt-bindings: clock: qcom,x1e80100-camcc: Fix the list of required-opps
drivers: clk: qcom: ipq5424: fix the freq table of sdcc1_apps clock
clk: qcom: lpassaudiocc-sc7280: Add support for LPASS resets for QCM6490
dt-bindings: clock: qcom: Add compatible for QCM6490 boards
clk: qcom: gdsc: Update the status poll timeout for GDSC
clk: qcom: gdsc: Set retain_ff before moving to HW CTRL
clk: qcom: gcc-sm8650: Do not turn off USB GDSCs during gdsc_disable()
clk: qcom: videocc: Constify 'struct qcom_cc_desc'
clk: qcom: gpucc: Constify 'struct qcom_cc_desc'
clk: qcom: dispcc: Constify 'struct qcom_cc_desc'
clk: qcom: camcc: Constify 'struct qcom_cc_desc'
dt-bindings: clock: qcom: sm8450-camcc: Remove qcom,x1e80100-camcc leftover
clk: qcom: Add support for Video Clock Controller on QCS8300
clk: qcom: Add support for GPU Clock Controller on QCS8300
...

show more ...

Merge tag 'asoc-v6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v6.15

This is a very big release due to a combination of some big new work,
m

Merge tag 'asoc-v6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v6.15

This is a very big release due to a combination of some big new work,
mainly new drivers and generic SoundWire support, and some wide ranging
cleanup work that made small changes to a lot of drivers.

- Morimoto-san has completed the conversion to use modern terminology
for the clocking configuration, and several other cleanups with
narrower impact.
- All the power management operation configuration was updated to use
current idioms by Takashi Iwai.
- Clarification of the control operations from Charles Keepax.
- Prepartory work for more generic SoundWire SCDA controls from Charles
Keepax.
- Support for AMD ACP 7.x, AWINC WM88166, Everest ES8388, Intel AVS
PEAKVOL and GAIN DSP modules Mediatek MT8188 DMIC, NXP i.MX95, nVidia
Tegra interconnects, Rockchip RK3588 S/PDIF, Texas Instruments
SN012776 and TAS5770L, and Wolfson WM8904 DMICs,

Some changes from the tip tree adding APIs needed by the AMD code are
included, these were unfortunately rebased in the tip tree after being
pulled in. There's also some regmap changes supporting the SCDA work
and some devres refactoring that was pulled in to support other changes.

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR (net-6.14-rc8).

Conflict:

tools/testing/selftests/net/Makefile
03544faad761 ("self

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR (net-6.14-rc8).

Conflict:

tools/testing/selftests/net/Makefile
03544faad761 ("selftest: net: add proc_net_pktgen")
3ed61b8938c6 ("selftests: net: test for lwtunnel dst ref loops")

tools/testing/selftests/net/config:
85cb3711acb8 ("selftests: net: Add test cases for link and peer netns")
3ed61b8938c6 ("selftests: net: test for lwtunnel dst ref loops")

Adjacent commits:

tools/testing/selftests/net/Makefile
c935af429ec2 ("selftests: net: add support for testing SO_RCVMARK and SO_RCVPRIORITY")
355d940f4d5a ("Revert "selftests: Add IPv6 link-local address generation tests for GRE devices."")

Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

ASoC: wm8904: Add DMIC and DRC support

Merge series from Francesco Dolcini <francesco@dolcini.it>:

This patch series adds DMIC and DRC support to the WM8904 driver, a new
of_ helper is added to sim

ASoC: wm8904: Add DMIC and DRC support

Merge series from Francesco Dolcini <francesco@dolcini.it>:

This patch series adds DMIC and DRC support to the WM8904 driver, a new
of_ helper is added to simplify the driver code.

DRC functionality is added in the same patch series to provide the
necessary dynamic range control to make DMIC support useful.

The WM8904 supports digital microphones on two of its inputs:
IN1L/DMICDAT1 and IN1R/DMICDAT2. These two inputs can either be
connected to an ADC or to the DMIC system. There is an ADC for each
line, and only one DMIC block. This DMIC block is either connected to
DMICDAT1 or to DMICDAT2. One DMIC data line supports two digital
microphones via time multiplexing.

The pin's functionality is decided during hardware design (IN1L vs
DMICDAT1 and IN1R vs DMICDAT2). This is reflected in the Device Tree.

If one line is analog and one is DMIC, we need to be able to switch
between ADC and DMIC at runtime. The DMIC source is known from the
Device Tree. If both are DMIC inputs, we need to be able to switch the
DMIC source. There is no need to switch between ADC and DMIC at runtime.

Therefore, kcontrols are dynamically added by the driver depending on
its Device Tree configuration.

This is a heavy rework of a previous patch series provided by Alifer
Moraes and Pierluigi Passaro,
https://lore.kernel.org/lkml/20220307141041.27538-1-alifer.m@variscite.com.

show more ...

Merge tag 'v6.14-rc7' into x86/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

spi: Merge up fixes

They are a dependency for applying some changes to the MAINTAINERS
file.