Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and we are stuck at 6.9 so lets bump things forward.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge tag 'v6.10' into next

Sync up with mainline to bring in device_for_each_child_node_scoped()
and other newer APIs.

Merge branch 'tip/x86/cpu'

The Lunarlake patches rely on the new VFM stuff.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

Merge drm-misc-next-2024-07-04 into drm-misc-next-fixes

Let's start the drm-misc-next-fixes cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync to v6.10-rc3.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-xe-next

Needed to get tracing cleanup and add mmio tracing series.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge remote-tracking branch 'drm-misc/drm-misc-next' into HEAD

Merge drm-misc-next tree into the msm-next tree in order to be able to
use HDMI connector framework for the MSM HDMI driver.

Merge topic branches 'clkdev' and 'fixes' into for-linus

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

v6.10-rc1 is released, forward from v6.9

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

Merge drm/drm-next into drm-misc-next

Let's start the new release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'powerpc-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:

- Enable BPF Kernel Functions (kfuncs) in the powerpc BPF JIT.

Merge tag 'powerpc-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:

- Enable BPF Kernel Functions (kfuncs) in the powerpc BPF JIT.

- Allow per-process DEXCR (Dynamic Execution Control Register) settings
via prctl, notably NPHIE which controls hashst/hashchk for ROP
protection.

- Install powerpc selftests in sub-directories. Note this changes the
way run_kselftest.sh needs to be invoked for powerpc selftests.

- Change fadump (Firmware Assisted Dump) to better handle memory
add/remove.

- Add support for passing additional parameters to the fadump kernel.

- Add support for updating the kdump image on CPU/memory add/remove
events.

- Other small features, cleanups and fixes.

Thanks to Andrew Donnellan, Andy Shevchenko, Aneesh Kumar K.V, Arnd
Bergmann, Benjamin Gray, Bjorn Helgaas, Christian Zigotzky, Christophe
Jaillet, Christophe Leroy, Colin Ian King, Cédric Le Goater, Dr. David
Alan Gilbert, Erhard Furtner, Frank Li, GUO Zihua, Ganesh Goudar, Geoff
Levand, Ghanshyam Agrawal, Greg Kurz, Hari Bathini, Joel Stanley, Justin
Stitt, Kunwu Chan, Li Yang, Lidong Zhong, Madhavan Srinivasan, Mahesh
Salgaonkar, Masahiro Yamada, Matthias Schiffer, Naresh Kamboju, Nathan
Chancellor, Nathan Lynch, Naveen N Rao, Nicholas Miehlbradt, Ran Wang,
Randy Dunlap, Ritesh Harjani, Sachin Sant, Shirisha Ganta, Shrikanth
Hegde, Sourabh Jain, Stephen Rothwell, sundar, Thorsten Blum, Vaibhav
Jain, Xiaowei Bao, Yang Li, and Zhao Chenhui.

* tag 'powerpc-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (85 commits)
powerpc/fadump: Fix section mismatch warning
powerpc/85xx: fix compile error without CONFIG_CRASH_DUMP
powerpc/fadump: update documentation about bootargs_append
powerpc/fadump: pass additional parameters when fadump is active
powerpc/fadump: setup additional parameters for dump capture kernel
powerpc/pseries/fadump: add support for multiple boot memory regions
selftests/powerpc/dexcr: Fix spelling mistake "predicition" -> "prediction"
KVM: PPC: Book3S HV nestedv2: Fix an error handling path in gs_msg_ops_kvmhv_nestedv2_config_fill_info()
KVM: PPC: Fix documentation for ppc mmu caps
KVM: PPC: code cleanup for kvmppc_book3s_irqprio_deliver
KVM: PPC: Book3S HV nestedv2: Cancel pending DEC exception
powerpc/xmon: Check cpu id in commands "c#", "dp#" and "dx#"
powerpc/code-patching: Use dedicated memory routines for patching
powerpc/code-patching: Test patch_instructions() during boot
powerpc64/kasan: Pass virtual addresses to kasan_init_phys_region()
powerpc: rename SPRN_HID2 define to SPRN_HID2_750FX
powerpc: Fix typos
powerpc/eeh: Fix spelling of the word "auxillary" and update comment
macintosh/ams: Fix unused variable warning
powerpc/Makefile: Remove bits related to the previous use of -mcmodel=large
...

show more ...

powerpc/fadump: setup additional parameters for dump capture kernel

For fadump case, passing additional parameters to dump capture kernel
helps in minimizing the memory footprint for it and also pro

powerpc/fadump: setup additional parameters for dump capture kernel

For fadump case, passing additional parameters to dump capture kernel
helps in minimizing the memory footprint for it and also provides the
flexibility to disable components/modules, like hugepages, that are
hindering the boot process of the special dump capture environment.

Set up a dedicated parameter area to be passed to the capture kernel.
This area type is defined as RTAS_FADUMP_PARAM_AREA. Sysfs attribute
'/sys/kernel/fadump/bootargs_append' is exported to the userspace to
specify the additional parameters to be passed to the capture kernel

Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240509115755.519982-3-hbathini@linux.ibm.com

show more ...

powerpc/pseries/fadump: add support for multiple boot memory regions

Currently, fadump on pseries assumes a single boot memory region even
though f/w supports more than one boot memory region. Add s

powerpc/pseries/fadump: add support for multiple boot memory regions

Currently, fadump on pseries assumes a single boot memory region even
though f/w supports more than one boot memory region. Add support for
more boot memory regions to make the implementation flexible for any
enhancements that introduce other region types. For this, rtas memory
structure for fadump is updated to have multiple boot memory regions
instead of just one. Additionally, methods responsible for creating
the fadump memory structure during both the first and second kernel
boot have been modified to take these multiple boot memory regions
into account. Also, a new callback has been added to the fadump_ops
structure to get the maximum boot memory regions supported by the
platform.

Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240509115755.519982-2-hbathini@linux.ibm.com

show more ...

powerpc: make fadump resilient with memory add/remove events

Due to changes in memory resources caused by either memory hotplug or
online/offline events, the elfcorehdr, which describes the CPUs and

powerpc: make fadump resilient with memory add/remove events

Due to changes in memory resources caused by either memory hotplug or
online/offline events, the elfcorehdr, which describes the CPUs and
memory of the crashed kernel to the kernel that collects the dump (known
as second/fadump kernel), becomes outdated. Consequently, attempting
dump collection with an outdated elfcorehdr can lead to failed or
inaccurate dump collection.

Memory hotplug or online/offline events is referred as memory add/remove
events in reset of the commit message.

The current solution to address the aforementioned issue is as follows:
Monitor memory add/remove events in userspace using udev rules, and
re-register fadump whenever there are changes in memory resources. This
leads to the creation of a new elfcorehdr with updated system memory
information.

There are several notable issues associated with re-registering fadump
for every memory add/remove events.

1. Bulk memory add/remove events with udev-based fadump re-registration
can lead to race conditions and, more importantly, it creates a wide
window during which fadump is inactive until all memory add/remove
events are settled.
2. Re-registering fadump for every memory add/remove event is
inefficient.
3. The memory for elfcorehdr is allocated based on the memblock regions
available during early boot and remains fixed thereafter. However, if
elfcorehdr is later recreated with additional memblock regions, its
size will increase, potentially leading to memory corruption.

Address the aforementioned challenges by shifting the creation of
elfcorehdr from the first kernel (also referred as the crashed kernel),
where it was created and frequently recreated for every memory
add/remove event, to the fadump kernel. As a result, the elfcorehdr only
needs to be created once, thus eliminating the necessity to re-register
fadump during memory add/remove events.

At present, the first kernel prepares fadump header and stores it in the
fadump reserved area. The fadump header includes the start address of
the elfcorehdr, crashing CPU details, and other relevant information. In
the event of a crash in the first kernel, the second/fadump boots and
accesses the fadump header prepared by the first kernel. It then
performs the following steps in a platform-specific function
[rtas|opal]_fadump_process:

1. Sanity check for fadump header
2. Update CPU notes in elfcorehdr

Along with the above, update the setup_fadump()/fadump.c to create
elfcorehdr and set its address to the global variable elfcorehdr_addr
for the vmcore module to process it in the second/fadump kernel.

Section below outlines the information required to create the elfcorehdr
and the changes made to make it available to the fadump kernel if it's
not already.

To create elfcorehdr, the following crashed kernel information is
required: CPU notes, vmcoreinfo, and memory ranges.

At present, the CPU notes are already prepared in the fadump kernel, so
no changes are needed in that regard. The fadump kernel has access to
all crashed kernel memory regions, including boot memory regions that
are relocated by firmware to fadump reserved areas, so no changes for
that either. However, it is necessary to add new members to the fadump
header, i.e., the 'fadump_crash_info_header' structure, in order to pass
the crashed kernel's vmcoreinfo address and its size to fadump kernel.

In addition to the vmcoreinfo address and size, there are a few other
attributes also added to the fadump_crash_info_header structure.

1. version:
It stores the fadump header version, which is currently set to 1.
This provides flexibility to update the fadump crash info header in
the future without changing the magic number. For each change in the
fadump header, the version will be increased. This will help the
updated kernel determine how to handle kernel dumps from older
kernels. The magic number remains relevant for checking fadump header
corruption.

2. pt_regs_sz/cpu_mask_sz:
Store size of pt_regs and cpu_mask structure of first kernel. These
attributes are used to prevent dump processing if the sizes of
pt_regs or cpu_mask structure differ between the first and fadump
kernels.

Note: if either first/crashed kernel or second/fadump kernel do not have
the changes introduced here then kernel fail to collect the dump and
prints relevant error message on the console.

Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240422195932.1583833-2-sourabhjain@linux.ibm.com

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge tag 'v6.10' into next

Sync up with mainline to bring in device_for_each_child_node_scoped()
and other newer APIs.

Merge branch 'tip/x86/cpu'

The Lunarlake patches rely on the new VFM stuff.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

Merge drm-misc-next-2024-07-04 into drm-misc-next-fixes

Let's start the drm-misc-next-fixes cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync to v6.10-rc3.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-xe-next

Needed to get tracing cleanup and add mmio tracing series.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge remote-tracking branch 'drm-misc/drm-misc-next' into HEAD

Merge drm-misc-next tree into the msm-next tree in order to be able to
use HDMI connector framework for the MSM HDMI driver.

Merge topic branches 'clkdev' and 'fixes' into for-linus

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

v6.10-rc1 is released, forward from v6.9

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

Merge drm/drm-next into drm-misc-next

Let's start the new release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>