Merge branch 'next' into for-linus

Prepare input updates for 6.17 merge window.

Merge tag 'ib-mfd-gpio-input-pwm-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next

Merge an immutable branch between MFD, GPIO, Input and PWM to resolve
conflicts for the mer

Merge tag 'ib-mfd-gpio-input-pwm-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next

Merge an immutable branch between MFD, GPIO, Input and PWM to resolve
conflicts for the merge window pull request.

show more ...

Merge remote-tracking branch 'drm/drm-next' into msm-next

Back-merge drm-next to (indirectly) get arm-smmu updates for making
stall-on-fault more reliable.

Signed-off-by: Rob Clark <robin.clark@oss

Merge remote-tracking branch 'drm/drm-next' into msm-next

Back-merge drm-next to (indirectly) get arm-smmu updates for making
stall-on-fault more reliable.

Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to forward to v6.16-rc1

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 6.16

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge drm/drm-next into drm-intel-next

Sync to v6.16-rc1, among other things to get the fixed size GENMASK_U*()
and BIT_U*() macros.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge tag 'perf-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull perf events updates from Ingo Molnar:
"Core & generic-arch updates:

- Add support for dynamic cons

Merge tag 'perf-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull perf events updates from Ingo Molnar:
"Core & generic-arch updates:

- Add support for dynamic constraints and propagate it to the Intel
driver (Kan Liang)

- Fix & enhance driver-specific throttling support (Kan Liang)

- Record sample last_period before updating on the x86 and PowerPC
platforms (Mark Barnett)

- Make perf_pmu_unregister() usable (Peter Zijlstra)

- Unify perf_event_free_task() / perf_event_exit_task_context()
(Peter Zijlstra)

- Simplify perf_event_release_kernel() and perf_event_free_task()
(Peter Zijlstra)

- Allocate non-contiguous AUX pages by default (Yabin Cui)

Uprobes updates:

- Add support to emulate NOP instructions (Jiri Olsa)

- selftests/bpf: Add 5-byte NOP uprobe trigger benchmark (Jiri Olsa)

x86 Intel PMU enhancements:

- Support Intel Auto Counter Reload [ACR] (Kan Liang)

- Add PMU support for Clearwater Forest (Dapeng Mi)

- Arch-PEBS preparatory changes: (Dapeng Mi)
- Parse CPUID archPerfmonExt leaves for non-hybrid CPUs
- Decouple BTS initialization from PEBS initialization
- Introduce pairs of PEBS static calls

x86 AMD PMU enhancements:

- Use hrtimer for handling overflows in the AMD uncore driver
(Sandipan Das)

- Prevent UMC counters from saturating (Sandipan Das)

Fixes and cleanups:

- Fix put_ctx() ordering (Frederic Weisbecker)

- Fix irq work dereferencing garbage (Frederic Weisbecker)

- Misc fixes and cleanups (Changbin Du, Frederic Weisbecker, Ian
Rogers, Ingo Molnar, Kan Liang, Peter Zijlstra, Qing Wang, Sandipan
Das, Thorsten Blum)"

* tag 'perf-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
perf/headers: Clean up <linux/perf_event.h> a bit
perf/uapi: Clean up <uapi/linux/perf_event.h> a bit
perf/uapi: Fix PERF_RECORD_SAMPLE comments in <uapi/linux/perf_event.h>
mips/perf: Remove driver-specific throttle support
xtensa/perf: Remove driver-specific throttle support
sparc/perf: Remove driver-specific throttle support
loongarch/perf: Remove driver-specific throttle support
csky/perf: Remove driver-specific throttle support
arc/perf: Remove driver-specific throttle support
alpha/perf: Remove driver-specific throttle support
perf/apple_m1: Remove driver-specific throttle support
perf/arm: Remove driver-specific throttle support
s390/perf: Remove driver-specific throttle support
powerpc/perf: Remove driver-specific throttle support
perf/x86/zhaoxin: Remove driver-specific throttle support
perf/x86/amd: Remove driver-specific throttle support
perf/x86/intel: Remove driver-specific throttle support
perf: Only dump the throttle log for the leader
perf: Fix the throttle logic for a group
perf/core: Add the is_event_in_freq_mode() helper to simplify the code
...

show more ...

loongarch/perf: Remove driver-specific throttle support

The throttle support has been added in the generic code. Remove
the driver-specific throttle support.

Besides the throttle, perf_event_overfl

loongarch/perf: Remove driver-specific throttle support

The throttle support has been added in the generic code. Remove
the driver-specific throttle support.

Besides the throttle, perf_event_overflow may return true because of
event_limit. It already does an inatomic event disable. The pmu->stop
is not required either.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250520181644.2673067-14-kan.liang@linux.intel.com

show more ...

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and we are stuck at 6.9 so lets bump things forward.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge tag 'v6.10' into next

Sync up with mainline to bring in device_for_each_child_node_scoped()
and other newer APIs.

Merge branch 'next' into for-linus

Prepare input updates for 6.11 merge window.

Merge branch 'tip/x86/cpu'

The Lunarlake patches rely on the new VFM stuff.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

Merge drm-misc-next-2024-07-04 into drm-misc-next-fixes

Let's start the drm-misc-next-fixes cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync to v6.10-rc3.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-xe-next

Needed to get tracing cleanup and add mmio tracing series.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge remote-tracking branch 'drm-misc/drm-misc-next' into HEAD

Merge drm-misc-next tree into the msm-next tree in order to be able to
use HDMI connector framework for the MSM HDMI driver.

Merge topic branches 'clkdev' and 'fixes' into for-linus

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

v6.10-rc1 is released, forward from v6.9

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

Merge tag 'v6.9' into next

Sync up with the mainline to bring in the new cleanup API.

Merge drm/drm-next into drm-misc-next

Let's start the new release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-intel-gt-next

Some display refactoring patches are needed in order to allow conflict-
less merging.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:
"ARM:

- Move a lot of state that was previously stored on a per vcpu basis
into a pe

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:
"ARM:

- Move a lot of state that was previously stored on a per vcpu basis
into a per-CPU area, because it is only pertinent to the host while
the vcpu is loaded. This results in better state tracking, and a
smaller vcpu structure.

- Add full handling of the ERET/ERETAA/ERETAB instructions in nested
virtualisation. The last two instructions also require emulating
part of the pointer authentication extension. As a result, the trap
handling of pointer authentication has been greatly simplified.

- Turn the global (and not very scalable) LPI translation cache into
a per-ITS, scalable cache, making non directly injected LPIs much
cheaper to make visible to the vcpu.

- A batch of pKVM patches, mostly fixes and cleanups, as the
upstreaming process seems to be resuming. Fingers crossed!

- Allocate PPIs and SGIs outside of the vcpu structure, allowing for
smaller EL2 mapping and some flexibility in implementing more or
less than 32 private IRQs.

- Purge stale mpidr_data if a vcpu is created after the MPIDR map has
been created.

- Preserve vcpu-specific ID registers across a vcpu reset.

- Various minor cleanups and improvements.

LoongArch:

- Add ParaVirt IPI support

- Add software breakpoint support

- Add mmio trace events support

RISC-V:

- Support guest breakpoints using ebreak

- Introduce per-VCPU mp_state_lock and reset_cntx_lock

- Virtualize SBI PMU snapshot and counter overflow interrupts

- New selftests for SBI PMU and Guest ebreak

- Some preparatory work for both TDX and SNP page fault handling.

This also cleans up the page fault path, so that the priorities of
various kinds of fauls (private page, no memory, write to read-only
slot, etc.) are easier to follow.

x86:

- Minimize amount of time that shadow PTEs remain in the special
REMOVED_SPTE state.

This is a state where the mmu_lock is held for reading but
concurrent accesses to the PTE have to spin; shortening its use
allows other vCPUs to repopulate the zapped region while the zapper
finishes tearing down the old, defunct page tables.

- Advertise the max mappable GPA in the "guest MAXPHYADDR" CPUID
field, which is defined by hardware but left for software use.

This lets KVM communicate its inability to map GPAs that set bits
51:48 on hosts without 5-level nested page tables. Guest firmware
is expected to use the information when mapping BARs; this avoids
that they end up at a legal, but unmappable, GPA.

- Fixed a bug where KVM would not reject accesses to MSR that aren't
supposed to exist given the vCPU model and/or KVM configuration.

- As usual, a bunch of code cleanups.

x86 (AMD):

- Implement a new and improved API to initialize SEV and SEV-ES VMs,
which will also be extendable to SEV-SNP.

The new API specifies the desired encryption in KVM_CREATE_VM and
then separately initializes the VM. The new API also allows
customizing the desired set of VMSA features; the features affect
the measurement of the VM's initial state, and therefore enabling
them cannot be done tout court by the hypervisor.

While at it, the new API includes two bugfixes that couldn't be
applied to the old one without a flag day in userspace or without
affecting the initial measurement. When a SEV-ES VM is created with
the new VM type, KVM_GET_REGS/KVM_SET_REGS and friends are rejected
once the VMSA has been encrypted. Also, the FPU and AVX state will
be synchronized and encrypted too.

- Support for GHCB version 2 as applicable to SEV-ES guests.

This, once more, is only accessible when using the new
KVM_SEV_INIT2 flow for initialization of SEV-ES VMs.

x86 (Intel):

- An initial bunch of prerequisite patches for Intel TDX were merged.

They generally don't do anything interesting. The only somewhat
user visible change is a new debugging mode that checks that KVM's
MMU never triggers a #VE virtualization exception in the guest.

- Clear vmcs.EXIT_QUALIFICATION when synthesizing an EPT Misconfig
VM-Exit to L1, as per the SDM.

Generic:

- Use vfree() instead of kvfree() for allocations that always use
vcalloc() or __vcalloc().

- Remove .change_pte() MMU notifier - the changes to non-KVM code are
small and Andrew Morton asked that I also take those through the
KVM tree.

The callback was only ever implemented by KVM (which was also the
original user of MMU notifiers) but it had been nonfunctional ever
since calls to set_pte_at_notify were wrapped with
invalidate_range_start and invalidate_range_end... in 2012.

Selftests:

- Enhance the demand paging test to allow for better reporting and
stressing of UFFD performance.

- Convert the steal time test to generate TAP-friendly output.

- Fix a flaky false positive in the xen_shinfo_test due to comparing
elapsed time across two different clock domains.

- Skip the MONITOR/MWAIT test if the host doesn't actually support
MWAIT.

- Avoid unnecessary use of "sudo" in the NX hugepage test wrapper
shell script, to play nice with running in a minimal userspace
environment.

- Allow skipping the RSEQ test's sanity check that the vCPU was able
to complete a reasonable number of KVM_RUNs, as the assert can fail
on a completely valid setup.

If the test is run on a large-ish system that is otherwise idle,
and the test isn't affined to a low-ish number of CPUs, the vCPU
task can be repeatedly migrated to CPUs that are in deep sleep
states, which results in the vCPU having very little net runtime
before the next migration due to high wakeup latencies.

- Define _GNU_SOURCE for all selftests to fix a warning that was
introduced by a change to kselftest_harness.h late in the 6.9
cycle, and because forcing every test to #define _GNU_SOURCE is
painful.

- Provide a global pseudo-RNG instance for all tests, so that library
code can generate random, but determinstic numbers.

- Use the global pRNG to randomly force emulation of select writes
from guest code on x86, e.g. to help validate KVM's emulation of
locked accesses.

- Allocate and initialize x86's GDT, IDT, TSS, segments, and default
exception handlers at VM creation, instead of forcing tests to
manually trigger the related setup.

Documentation:

- Fix a goof in the KVM_CREATE_GUEST_MEMFD documentation"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (225 commits)
selftests/kvm: remove dead file
KVM: selftests: arm64: Test vCPU-scoped feature ID registers
KVM: selftests: arm64: Test that feature ID regs survive a reset
KVM: selftests: arm64: Store expected register value in set_id_regs
KVM: selftests: arm64: Rename helper in set_id_regs to imply VM scope
KVM: arm64: Only reset vCPU-scoped feature ID regs once
KVM: arm64: Reset VM feature ID regs from kvm_reset_sys_regs()
KVM: arm64: Rename is_id_reg() to imply VM scope
KVM: arm64: Destroy mpidr_data for 'late' vCPU creation
KVM: arm64: Use hVHE in pKVM by default on CPUs with VHE support
KVM: arm64: Fix hvhe/nvhe early alias parsing
KVM: SEV: Allow per-guest configuration of GHCB protocol version
KVM: SEV: Add GHCB handling for termination requests
KVM: SEV: Add GHCB handling for Hypervisor Feature Support requests
KVM: SEV: Add support to handle AP reset MSR protocol
KVM: x86: Explicitly zero kvm_caps during vendor module load
KVM: x86: Fully re-initialize supported_mce_cap on vendor module load
KVM: x86: Fully re-initialize supported_vm_types on vendor module load
KVM: x86/mmu: Sanity check that __kvm_faultin_pfn() doesn't create noslot pfns
KVM: x86/mmu: Initialize kvm_page_fault's pfn and hva to error values
...

show more ...

Merge tag 'i2c-host-fixes-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow

This tag includes two fixes. The first one, in the Cadence driver
seen i

Merge tag 'i2c-host-fixes-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow

This tag includes two fixes. The first one, in the Cadence driver
seen in Qemu, prevents unintentional FIFO clearing at the
beginning of a transaction. The second fix, in the SynQuacer,
ensures proper error handling during clock get, prepare, and
enable operations by using the devm_clk_get_enabled() helper.

show more ...

Merge tag 'loongarch-kvm-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD

LoongArch KVM changes for v6.10

1. Add ParaVirt IPI support.
2. Add software brea

Merge tag 'loongarch-kvm-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD

LoongArch KVM changes for v6.10

1. Add ParaVirt IPI support.
2. Add software breakpoint support.
3. Add mmio trace events support.

show more ...