ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .

ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

show more ...

ARM: dts: lpc435x: remove address and size cells from gpio-keys-polled nodes

The change removes redundant #address-cells and #size-cells properties from
gpio-keys-polled compatible device nodes foun

ARM: dts: lpc435x: remove address and size cells from gpio-keys-polled nodes

The change removes redundant #address-cells and #size-cells properties from
gpio-keys-polled compatible device nodes found in lpc4357-ea4357-devkit and
lpc4350-hitex-eval board DTS files.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>

show more ...

ARM: dts: lpc18xx: Add generic compatible string for I2C EEPROM

The at24 driver allows to register I2C EEPROM chips using different vendor
and devices, but the I2C subsystem does not take the vendor

ARM: dts: lpc18xx: Add generic compatible string for I2C EEPROM

The at24 driver allows to register I2C EEPROM chips using different vendor
and devices, but the I2C subsystem does not take the vendor into account
when matching using the I2C table since it only has device entries.

But when matching using an OF table, both the vendor and device has to be
taken into account so the driver defines only a set of compatible strings
using the "atmel" vendor as a generic fallback for compatible I2C devices.

So add this generic fallback to the device node compatible string to make
the device to match the driver using the OF device ID table.

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

ARM: dts: lpc18xx: remove skeleton.dtsi include and fix unit address warnings

Removale of skeleton.dtsi allows us also to fix the following
warning from the dts compiler:
Warning (unit_address_vs_

ARM: dts: lpc18xx: remove skeleton.dtsi include and fix unit address warnings

Removale of skeleton.dtsi allows us also to fix the following
warning from the dts compiler:
Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name

by adding proper unit addresses to the memory nodes.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>

show more ...

ARM: dts: lpc4350-hitex-eval: fix binding for SE97 i2c device

The 'compatible = "nxp,jc42"' binding only happened to work because
the Linux driver is named jc42. The driver now supports generic
bind

ARM: dts: lpc4350-hitex-eval: fix binding for SE97 i2c device

The 'compatible = "nxp,jc42"' binding only happened to work because
the Linux driver is named jc42. The driver now supports generic
bindings for JC-42 compatible chips, so use the generic binding instead.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Joachim Eastwood <manabian@gmail.com>

show more ...

ARM: dts: lpc4350-hitex-eval: fix unit name warnings from dtc

Fix the following warnings from dtc by either adding or removing
the unit name from the node.

Warning (unit_address_vs_reg): Node /soc/

ARM: dts: lpc4350-hitex-eval: fix unit name warnings from dtc

Fix the following warnings from dtc by either adding or removing
the unit name from the node.

Warning (unit_address_vs_reg): Node /soc/flash-controller@40003000/flash@0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /pca_buttons/button@0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /pca_buttons/button@1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /pca_buttons/button@2 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /pca_buttons/button@3 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /pca_buttons/button@4 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /pca_buttons/button@5 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /pca_buttons/button@6 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /pca_buttons/button@7 has a unit name, but no reg property

Signed-off-by: Joachim Eastwood <manabian@gmail.com>

show more ...

ARM: dts: lpc4350-hitex-eval: add adc1

Enable adc1 on LPC4350 Hitex Evalution board. This board has a
10k potensiometer (R26) connected to ADC1 channel 2.

Signed-off-by: Joachim Eastwood <manabian@

ARM: dts: lpc4350-hitex-eval: add adc1

Enable adc1 on LPC4350 Hitex Evalution board. This board has a
10k potensiometer (R26) connected to ADC1 channel 2.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>

show more ...

ARM: dts: lpc4350-hitex-eval: add joystick, buttons and leds

Add the joystick, buttons and LEDs connected to the I2C I/O expander.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>

ARM: dts: lpc4350-hitex-eval: add i2c0 and devices

Add the I2C0 bus and the some of the I2C devices on the Hitex
LPC4350 eval board.

Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
S

ARM: dts: lpc4350-hitex-eval: add i2c0 and devices

Add the I2C0 bus and the some of the I2C devices on the Hitex
LPC4350 eval board.

Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
Signed-off-by: Joachim Eastwood <manabian@gmail.com>

show more ...

ARM: dts: lpc4350-hitex-eval: add spifi and flash device

The Hitex LPC4350 eval board has a Spansion S25SL064P SPI-NOR Flash connected
to the SPIFI perherial.

Signed-off-by: Joachim Eastwood <manab

ARM: dts: lpc4350-hitex-eval: add spifi and flash device

The Hitex LPC4350 eval board has a Spansion S25SL064P SPI-NOR Flash connected
to the SPIFI perherial.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>

show more ...

ARM: dts: lpc4350-hitex-eval: add emc pins and static memory devices

Setup the emc pins used by external memory devices and add
configuration for the devices found on the Hitex eval board.

The Hite

ARM: dts: lpc4350-hitex-eval: add emc pins and static memory devices

Setup the emc pins used by external memory devices and add
configuration for the devices found on the Hitex eval board.

The Hitex eval board has a NOR Flash attached to chip select 0
and 512 kB of SRAM on chip select 2.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

ARM: dts: lpc4350-hitex-eval: add ethernet

Enable Ethernet and add pin muxing and set the correct
frequency on the enet tx clock input.

Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar

ARM: dts: lpc4350-hitex-eval: add ethernet

Enable Ethernet and add pin muxing and set the correct
frequency on the enet tx clock input.

Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

ARM: dts: lpc4350-hitex-eval: add pinctrl and uart0 muxing

Setup pin muxing and properties for the debug console on uart0.

Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
Signed-off-

ARM: dts: lpc4350-hitex-eval: add pinctrl and uart0 muxing

Setup pin muxing and properties for the debug console on uart0.

Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

ARM: dts: lpc18xx: add cgu and ccu clock-controller nodes

Add CGU and CCU clock-controller nodes for lpc18xx together with
the fixed input clocks. Also remove the temporary fixed-factor
pll1 clock f

ARM: dts: lpc18xx: add cgu and ccu clock-controller nodes

Add CGU and CCU clock-controller nodes for lpc18xx together with
the fixed input clocks. Also remove the temporary fixed-factor
pll1 clock from both lpc18xx and lpc4350-hitex-eval DTS now that
proper clock drivers are inplace.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Acked-by: Michael Turquette <mturquette@baylibre.com>

show more ...

ARM: dts: Add DT for Hitex LPC4350 Evaluation Board

Add basic support for Hitex LPC4350 Evaluation Board. Board
features a LPC4350 Soc, 8 MB SDRAM, 8 MB SPI Flash, USB and
Ethernet.

More informatio

ARM: dts: Add DT for Hitex LPC4350 Evaluation Board

Add basic support for Hitex LPC4350 Evaluation Board. Board
features a LPC4350 Soc, 8 MB SDRAM, 8 MB SPI Flash, USB and
Ethernet.

More information can be found on:
http://www.hitex.com/index.php?id=3212

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@gmail.com>
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...