Merge tag 'soc-dt-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC devicetree updates from Arnd Bergmann:
"There are a few new variants of existing chips:

- mt6572 is an

Merge tag 'soc-dt-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC devicetree updates from Arnd Bergmann:
"There are a few new variants of existing chips:

- mt6572 is an older mobile phone chip from mediatek that was
extremely popular a decade ago but never got upstreamed until now

- exynos2200 is a recent high-end mobile phone chip used in a few
Samsung phones like the Galaxy S22

- Renesas R-Car V4M-7 (R8A779H2) is an updated version of R-Car V4M
(R8A779H0) and used in automotive applications

- Tegra264 is a new chip from NVIDIA, but support is fairly minimal
for now, and not much information is public about it

There are five more chips in a separate branch, as those are new chip
families that I merged along with the necessary infrastructure.

New board support is not that exciting, with a total of 33 newly added
machines here:

- Evaluation platforms for the chips above, plus TI am62d2 and Sophgo
sg2042

- Six 32-bit industrial boards based on stm32, imx6 and am33 chips,
plus eight 64-bit rockchips rk33xx/rk35xx, am62d2, t527, imx8 and
imx95

- Two newly added ASPEED BMC based motherboards, and one that got
removed

- Phones and Tablets based on 32-bit mt6572, tegra30 and 64-bit
msm8976 SoCs

- Three Laptops based on Mediatek mt8186 and Qualcomm Snapdragon X1

- A set-top box based on Amlogic meson-gxm

Updates for existing machines are spread over all the above families.
One notable change here is support for the RP1 I/O chip used in
Raspberry Pi 5"

* tag 'soc-dt-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (606 commits)
riscv: dts: sophgo: fix mdio node name for CV180X
riscv: dts: sophgo: sophgo-srd3-10: reserve uart0 device
riscv: dts: sophgo: add Sophgo SG2042_EVB_V2.0 board device tree
riscv: dts: sophgo: add Sophgo SG2042_EVB_V1.X board device tree
dt-bindings: riscv: add Sophgo SG2042_EVB_V1.X/V2.0 bindings
riscv: dts: sophgo: add ethernet GMAC device for sg2042
riscv: dts: sophgo: Enable ethernet device for Huashan Pi
riscv: dts: sophgo: Add mdio multiplexer device for cv18xx
riscv: dts: sophgo: Add ethernet device for cv18xx
riscv: dts: sophgo: sg2044: add pmu configuration
riscv: dts: sophgo: sg2044: add ziccrse extension
riscv: dts: sophgo: add zfh for sg2042
riscv: dts: sophgo: add ziccrse for sg2042
riscv: dts: sophgo: Add xtheadvector to the sg2042 devicetree
riscv: dts: sophgo: sg2044: add PCIe device support for SG2044
riscv: dts: sophgo: sg2044: add MSI device support for SG2044
riscv: dts: sophgo: add reset configuration for Sophgo CV1800 series SoC
riscv: dts: sophgo: add reset generator for Sophgo CV1800 series SoC
dt-bindings: soc: sophgo: Move SoCs/boards from riscv into soc, add SG2000
riscv: dts: sophgo: sg2044: Add missing riscv,cbop-block-size property
...

show more ...

Merge tag 'imx-dt-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt

i.MX ARM device tree changes for 6.17:

- New device trees for Engicam MicroGEA-MX6UL and i.MX28

Merge tag 'imx-dt-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt

i.MX ARM device tree changes for 6.17:

- New device trees for Engicam MicroGEA-MX6UL and i.MX28 Amarula board
- A couple of changes from Bence Csókás to replace license text comment
with SPDX identifier for Karo and Gateworks boards
- A couple of imx7s-warp updates from Fabio Estevam to improve Bluetooth
and Wifi description
- A set of dt-schema fixes for VF610 based boards from Frank Li
- A couple of imx6ul-kontron-sl-common changes to add SPI NOR partitions
and correct QSPI NAND node name
- A few other random improvements

* tag 'imx-dt-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (21 commits)
ARM: dts: imx6-gw: Replace license text comment with SPDX identifier
ARM: dts: imx6ul-kontron-sl-common: Fix QSPI NAND node name
ARM: dts: imx6ul-kontron-sl-common: Add SPI NOR partitions
ARM: dts: imx6ul-kontron-bl-common: Fix RTS polarity for RS485 interface
ARM: dts: imx6-karo: Replace license text comment with SPDX identifier
ARM: dts: imx6ul: support Engicam MicroGEA GTW board
ARM: dts: imx6ul: support Engicam MicroGEA RMM board
ARM: dts: imx6ul: support Engicam MicroGEA BMM board
ARM: dts: imx6ul: support Engicam MicroGEA-MX6UL SoM
ARM: dts: mxs: support i.MX28 Amarula rmm board
ARM: dts: imx28: add pwm7 muxing options
ARM: dts: vf: vf610-zii-cfu1: rename node name *-gpio to *-gpios
ARM: dts: vf: vf-colibri-eval-v3: add power-supply for edt,et057090dhu
ARM: dts: vf: rename io-expander@20 to pinctrl@20
ARM: dts: vf: remove redundant layer under iomux
ARM: dts: vf: remove redundant pinctrl-names
ARM: dts: vf: remove reg property for arm pmu
ARM: dts: vfxxx: Correctly use two tuples for timer address
ARM: dts: add ngpios for vf610 compatible gpio controllers
ARM: dts: imx7s-warp: Improve the Wifi description
...

Link: https://lore.kernel.org/r/20250713055441.221235-3-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

ARM: dts: imx6-karo: Replace license text comment with SPDX identifier

Replace verbatim license text with a `SPDX-License-Identifier`

The comment header mis-attributes this license to be "X11", but

ARM: dts: imx6-karo: Replace license text comment with SPDX identifier

Replace verbatim license text with a `SPDX-License-Identifier`

The comment header mis-attributes this license to be "X11", but the
license text does not include the last line "Except as contained in this
notice, the name of the X Consortium shall not be used in advertising or
otherwise to promote the sale, use or other dealings in this Software
without prior written authorization from the X Consortium.". Therefore,
this license is actually equivalent to the SPDX "MIT" license (confirmed
by text diffing).

Cc: Lothar Waßmann <LW@KARO-electronics.de>
Acked-By: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Bence Csókás <csokas.bence@prolan.hu>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .

ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

show more ...

ARM: dts: imx6-tx6: add a .dtsi file for the MB7 baseboard

Move the MB7 specific settings to a separate .dtsi file to facilitate
supporting more module variants with this baseboard.

Signed-off-by:

ARM: dts: imx6-tx6: add a .dtsi file for the MB7 baseboard

Move the MB7 specific settings to a separate .dtsi file to facilitate
supporting more module variants with this baseboard.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

ARM: dts: imx6-tx6: move display configuration to .dtsi file

Currently the display (LCD or LVDS) configuration is duplicated with
slight variations in each TX6 module specific file.

Move it to an i

ARM: dts: imx6-tx6: move display configuration to .dtsi file

Currently the display (LCD or LVDS) configuration is duplicated with
slight variations in each TX6 module specific file.

Move it to an include file for simplification and consistency.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

ARM: dts: imx6-tx6: remove obsolete ipu1 alias

The 'ipu1' alias is already defined in imx6q.dtsi. There is no need to
redefine it here.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed

ARM: dts: imx6-tx6: remove obsolete ipu1 alias

The 'ipu1' alias is already defined in imx6q.dtsi. There is no need to
redefine it here.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

ARM: dts: imx6-tx6: remove obsolete eeti,egalax_ts

The display, that incorporates this touchpanel is obsolete and won't
be supported any more.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>

ARM: dts: imx6-tx6: remove obsolete eeti,egalax_ts

The display, that incorporates this touchpanel is obsolete and won't
be supported any more.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

ARM: dts: imx6: add support for the Ka-Ro electronics 'MB7' baseboard

This baseboard can be used with all TX6 SoMs, but only a certain set
of combinations can be ordered by default. Add support for

ARM: dts: imx6: add support for the Ka-Ro electronics 'MB7' baseboard

This baseboard can be used with all TX6 SoMs, but only a certain set
of combinations can be ordered by default. Add support for these
combinations in mainline, so that users can easily adopt their own
combination of SoM and baseboard themselves.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...