ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .

ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

show more ...

ARM: dts: mediatek: Remove pins-are-numbered property

Remove the unnecessary pins-are-numbered property from
Mediatek ARM DeviceTrees

Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com>
Review

ARM: dts: mediatek: Remove pins-are-numbered property

Remove the unnecessary pins-are-numbered property from
Mediatek ARM DeviceTrees

Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20221129023401.278780-7-bero@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

show more ...

arm: dts: mt8135: Move pinfunc to include/dt-bindings/pinctrl

Move mt8135-pinfunc.h into include/dt-bindings/pinctrl so that we can
include it in yaml examples.

Signed-off-by: Hsin-Yi Wang <hsinyi@

arm: dts: mt8135: Move pinfunc to include/dt-bindings/pinctrl

Move mt8135-pinfunc.h into include/dt-bindings/pinctrl so that we can
include it in yaml examples.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20210804044033.3047296-1-hsinyi@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

show more ...

ARM: dts: Kill off skeleton{64}.dtsi

Remove the usage of skeleton.dtsi in the remaining dts files. It was
deprecated since commit 9c0da3cc61f1 ("ARM: dts: explicitly mark
skeleton.dtsi as deprecated

ARM: dts: Kill off skeleton{64}.dtsi

Remove the usage of skeleton.dtsi in the remaining dts files. It was
deprecated since commit 9c0da3cc61f1 ("ARM: dts: explicitly mark
skeleton.dtsi as deprecated"). This will make adding a unit-address to
memory nodes easier.

The main tricky part to removing skeleton.dtsi is we could end up with
no /memory node at all when a bootloader depends on one being present. I
hacked up dtc to check for this condition.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

arm: dts: mediatek: converted to using SPDX identifiers

Convert boilerplate license statement into proper SPDX identifier style.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Cc: Philippe Ombre

arm: dts: mediatek: converted to using SPDX identifiers

Convert boilerplate license statement into proper SPDX identifier style.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

show more ...

ARM: DTS: Fix register map for virt-capable GIC

Since everybody copied my own mistake from the DT binding example,
let's address all the offenders in one swift go.

Most of them got the CPU interfac

ARM: DTS: Fix register map for virt-capable GIC

Since everybody copied my own mistake from the DT binding example,
let's address all the offenders in one swift go.

Most of them got the CPU interface size wrong (4kB, while it should
be 8kB), except for both keystone platforms which got the control
interface wrong (4kB instead of 8kB).

In a few cases where I knew for sure what implementation was used,
I've added the "arm,gic-400" compatible string. I'm 99% sure that
this is what everyone is using, but short of having the TRM for
all the other SoCs, I've left them alone.

Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

ARM: mediatek: DT: Move reset controller constants into common location

By popular vote, the DT binding includes for reset controllers are located
in include/dt-bindings/reset/. Move the mediatek re

ARM: mediatek: DT: Move reset controller constants into common location

By popular vote, the DT binding includes for reset controllers are located
in include/dt-bindings/reset/. Move the mediatek reset constants in there,
too, to avoid confusion.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

show more ...

ARM: dts: mt8135: enable basic SMP bringup for mt8135

Add arch timer node to enable arch-timer support. MT8135 firmware
doesn't correctly setup arch-timer frequency and CNTVOFF, add
properties to wo

ARM: dts: mt8135: enable basic SMP bringup for mt8135

Add arch timer node to enable arch-timer support. MT8135 firmware
doesn't correctly setup arch-timer frequency and CNTVOFF, add
properties to workaround this.

This also set cpu enable-method to enable SMP.

Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

show more ...

ARM: dts: mediatek mt8135: Use real UART clocks

We used to provide dummy clocks for the UART. Now that we have
common clock support we can provide the real clocks to the UART.

Signed-off-by: Sascha

ARM: dts: mediatek mt8135: Use real UART clocks

We used to provide dummy clocks for the UART. Now that we have
common clock support we can provide the real clocks to the UART.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

show more ...

ARM: dts: mt8135: Add pmic wrapper nodes

This adds the pmic wrapper node to the MediaTek MT8135 dtsi file.

This unit is used to access the PMIC on MediaTek boards.

Signed-off-by: Sascha Hauer <s.h

ARM: dts: mt8135: Add pmic wrapper nodes

This adds the pmic wrapper node to the MediaTek MT8135 dtsi file.

This unit is used to access the PMIC on MediaTek boards.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

show more ...

ARM: dts: mediatek: Enable clock support for Mediatek MT8135.

This patch adds MT8135 clock controllers into device tree.

Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Signed-off-by: Henry C

ARM: dts: mediatek: Enable clock support for Mediatek MT8135.

This patch adds MT8135 clock controllers into device tree.

Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Signed-off-by: Henry Chen <henryc.chen@mediatek.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

show more ...

ARM: dts: mt8135: Add pinctrl/GPIO/EINT node for mt8135.

Add pinctrl,GPIO and EINT node to mt8135.dtsi.

Signed-off-by: Hongzhou Yang <hongzhou.yang@mediatek.com>
Acked-by: Linus Walleij <linus.wall

ARM: dts: mt8135: Add pinctrl/GPIO/EINT node for mt8135.

Add pinctrl,GPIO and EINT node to mt8135.dtsi.

Signed-off-by: Hongzhou Yang <hongzhou.yang@mediatek.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

show more ...

ARM: mediatek: add UART dts for mt8127 and mt8135

This add dts support for mt8127 and mt8135 SOC UART

Signed-off-by: Eddie Huang <eddie.huang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias

ARM: mediatek: add UART dts for mt8127 and mt8135

This add dts support for mt8127 and mt8135 SOC UART

Signed-off-by: Eddie Huang <eddie.huang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

show more ...

ARM: mediatek: Add sysirq in mt6589/mt8135/mt8127 dtsi

Add sysirq settings for mt6589/mt8135/mt8127
This also correct timer interrupt flag. The old setting works
because boot loader already set pola

ARM: mediatek: Add sysirq in mt6589/mt8135/mt8127 dtsi

Add sysirq settings for mt6589/mt8135/mt8127
This also correct timer interrupt flag. The old setting works
because boot loader already set polarity for timer interrupt.
Without intpol support, the setting was not changed so gic
can get the irq correctly.

Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

show more ...

ARM: mediatek: Add basic support for mt8135

This adds a basic dtsi for MT8135 based SoC.

Signed-off-by: Joe.C <yingjoe.chen@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>