Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and we are stuck at 6.9 so lets bump things forward.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge tag 'v6.10' into next

Sync up with mainline to bring in device_for_each_child_node_scoped()
and other newer APIs.

Merge branch 'tip/x86/cpu'

The Lunarlake patches rely on the new VFM stuff.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

Merge drm-misc-next-2024-07-04 into drm-misc-next-fixes

Let's start the drm-misc-next-fixes cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync to v6.10-rc3.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-xe-next

Needed to get tracing cleanup and add mmio tracing series.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge remote-tracking branch 'drm-misc/drm-misc-next' into HEAD

Merge drm-misc-next tree into the msm-next tree in order to be able to
use HDMI connector framework for the MSM HDMI driver.

Merge topic branches 'clkdev' and 'fixes' into for-linus

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

v6.10-rc1 is released, forward from v6.9

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

Merge drm/drm-next into drm-misc-next

Let's start the new release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Cross merge.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'soc-dt-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC devicetree updates from Arnd Bergmann:
"The updates this time are a bit smaller than most times, mainly
b

Merge tag 'soc-dt-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC devicetree updates from Arnd Bergmann:
"The updates this time are a bit smaller than most times, mainly
because it is not totally dominated by new Qualcomm hardware support.

Instead, we larger than average updates for Rockchips, NXP, Allwinner
and TI. The only two new SoCs this time are both from NXP and are
minor variants of already supported ones.

The updates for aspeed, amlogic and mediatek came a little late, so
I'm saving those for part 2 in a few days if everything turns out
fine.

New machines this time contain:

- two Broadcom SoC based wireless routers from Asus

- Five allwinner based consumer devices for gaming, set-top-box and
eboot reader applications

- Three older phones based on Qualcomm chips, plus the more recent
Sony Xperia 1 V

- 14 industrial and embedded boards based on NXP i.MX6, i.MX8,
layerscape and s32g3 SoCs

- six rockchips boards including another handheld game console and a
few single-board computers

On top of these, we have the usual cleanups for dtc warnings and
updates to add more features to already merged machines"

* tag 'soc-dt-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (612 commits)
arm64: dts: marvell: espressobin-ultra: fix Ethernet Switch unit address
arm64: dts: marvell: turris-mox: drop unneeded flash address/size-cells
arm64: dts: marvell: eDPU: drop redundant address/size-cells
arm64: dts: qcom: pm6150: correct USB VBUS regulator compatible
arm64: dts: rockchip: add rk3588 pcie and php IOMMUs
arm64: dts: rockchip: enable onboard spi flash for rock-3a
arm64: dts: rockchip: add USB-C support to rk3588s-orangepi-5
arm64: dts: rockchip: Enable GPU on Orange Pi 5
arm64: dts: rockchip: enable GPU on khadas-edge2
arm64: dts: rockchip: Add USB3 on Edgeble NCM6A-IO board
arm64: dts: rockchip: Support poweroff on Edgeble Neural Compute Module
arm64: dts: rockchip: Add Radxa ROCK 3C
dt-bindings: arm: rockchip: add Radxa ROCK 3C
arm64: dts: exynos: gs101: specify empty clocks for remaining pinctrl
arm64: dts: exynos: gs101: specify bus clock for pinctrl_hsi2
arm64: dts: exynos: gs101: specify bus clock for pinctrl_peric[01]
arm64: dts: exynos: gs101: specify bus clock for pinctrl (far) alive
arm64: dts: Add/fix /memory node unit-addresses
arm64: dts: qcom: qcs404: fix bluetooth device address
arm64: dts: qcom: sc8280xp-x13s: enable USB MP and fingerprint reader
...

show more ...

Merge tag 'sunxi-dt-for-6.10-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt

- added multicolor LED node for pinephone
- marked pinephone LEDs to retain status in suspe

Merge tag 'sunxi-dt-for-6.10-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt

- added multicolor LED node for pinephone
- marked pinephone LEDs to retain status in suspend
- DT cleanups & fixes
- fixed A64 GPU frequency at 432 MHz
- added H616 NMI node
- new boards: PocketBook 614 Plus, Tanix TX1

* tag 'sunxi-dt-for-6.10-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h616: Add NMI device node
arm64: dts: allwinner: Add Tanix TX1 support
dt-bindings: arm: sunxi: document Tanix TX1 name
ARM: dts: sun5i: Add PocketBook 614 Plus support
dt-bindings: arm: sunxi: Add PocketBook 614 Plus
arm64: dts: allwinner: h616: Fix I2C0 pins
arm64: dts: allwinner: a64: Run GPU at 432 MHz
arm: dts: allwinner: drop underscore in node names
arm64: dts: allwinner: Orange Pi: delete node by phandle
arm64: dts: allwinner: drop underscore in node names
arm64: dts: allwinner: Pine H64: correctly remove reg_gmac_3v3
arm64: dts: allwinner: pinephone: add multicolor LED node
arm64: dts: allwinner: pinephone: Retain LEDs state in suspend

Link: https://lore.kernel.org/r/20240426164510.GA101219@jernej-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

arm: dts: allwinner: drop underscore in node names

Underscores should not be used in node names (dtc with W=2 warns about
them), so replace them with hyphens. Use also generic name for pwrseq
node,

arm: dts: allwinner: drop underscore in node names

Underscores should not be used in node names (dtc with W=2 warns about
them), so replace them with hyphens. Use also generic name for pwrseq
node, because generic naming is favored by Devicetree spec. All the
clocks affected by this change use clock-output-names, so resulting
clock name should not change. Functional impact checked with comparing
before/after DTBs with dtx_diff and fdtdump.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240317184130.157695-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>

show more ...

ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .

ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

show more ...

ARM: dts: sunxi: Use the new r_intc binding

The binding of R_INTC was updated to allow specifying interrupts other
than the external NMI, since routing those interrupts through the R_INTC
driver all

ARM: dts: sunxi: Use the new r_intc binding

The binding of R_INTC was updated to allow specifying interrupts other
than the external NMI, since routing those interrupts through the R_INTC
driver allows using them for wakeup.

Update the device trees to use the new binding.

Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>

show more ...

ARM: dts: sunxi: Fix the LED node names

According to the LED bindings, the LED node names are supposed to be led
plus an optional suffix. Let's fix our users to use that new scheme.

Signed-off-by:

ARM: dts: sunxi: Fix the LED node names

According to the LED bindings, the LED node names are supposed to be led
plus an optional suffix. Let's fix our users to use that new scheme.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Jernej Skrabec <jernej.skrabec@siol.net>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20210114113538.1233933-6-maxime@cerno.tech

show more ...

ARM: dts: sun8i: a83t: Enable both RGMII RX/TX delay on Ethernet PHY

The Ethernet PHY on the Bananapi M3 and Cubietruck Plus have the RX
and TX delays enabled on the PHY, using pull-ups on the RXDLY

ARM: dts: sun8i: a83t: Enable both RGMII RX/TX delay on Ethernet PHY

The Ethernet PHY on the Bananapi M3 and Cubietruck Plus have the RX
and TX delays enabled on the PHY, using pull-ups on the RXDLY and
TXDLY pins.

Fix the phy-mode description to correct reflect this so that the
implementation doesn't reconfigure the delays incorrectly. This
happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e
rx/tx delay config").

Fixes: 039359948a4b ("ARM: dts: sun8i: a83t: Enable Ethernet on two boards")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://lore.kernel.org/r/20201024162515.30032-6-wens@kernel.org

show more ...

ARM: dts: sun8i: a83t: Correct USB3503 GPIOs polarity

Current USB3503 driver ignores GPIO polarity and always operates as if the
GPIO lines were flagged as ACTIVE_HIGH. Fix the polarity for the exis

ARM: dts: sun8i: a83t: Correct USB3503 GPIOs polarity

Current USB3503 driver ignores GPIO polarity and always operates as if the
GPIO lines were flagged as ACTIVE_HIGH. Fix the polarity for the existing
USB3503 chip applications to match the chip specification and common
convention for naming the pins. The only pin, which has to be ACTIVE_LOW
is the reset pin. The remaining are ACTIVE_HIGH. This change allows later
to fix the USB3503 driver to properly use generic GPIO bindings and read
polarity from DT.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

show more ...

ARM: dts: sun8i: a83t: Enable HDMI output on Cubietruck Plus

The Cubietruck Plus has an HDMI connector tied to the HDMI output of the
SoC.

Enables display output via HDMI on the Cubietruck Plus. Th

ARM: dts: sun8i: a83t: Enable HDMI output on Cubietruck Plus

The Cubietruck Plus has an HDMI connector tied to the HDMI output of the
SoC.

Enables display output via HDMI on the Cubietruck Plus. The connector
device node is named "hdmi-connector" as there is also a display port
connector, which is tied to the MIPI DSI output of the SoC through a
MIPI-DSI-to-DP bridge. This part is not supported yet.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

show more ...

ARM: dts: sun8i: a83t: Enable USB OTG controller on some boards

The Bananapi M3 and Cubietruck Plus both have USB OTG ports wired to the
SoC and PMIC in the same way, with the N_VBUSEN pin on the PM

ARM: dts: sun8i: a83t: Enable USB OTG controller on some boards

The Bananapi M3 and Cubietruck Plus both have USB OTG ports wired to the
SoC and PMIC in the same way, with the N_VBUSEN pin on the PMIC
controlling VBUS output, the PMIC's VBUS input for sensing VBUS, and
PH11 on the SoC for sensing the ID pin.

Enable OTG on both boards.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

show more ...

ARM: dts: sun8i: a83t: Enable PMIC power supplies on various boards

On the Bananapi M3 and Cubietruck Plus, the DC input jacks are wired to
the ACIN pins, which is represented by the AC power supply

ARM: dts: sun8i: a83t: Enable PMIC power supplies on various boards

On the Bananapi M3 and Cubietruck Plus, the DC input jacks are wired to
the ACIN pins, which is represented by the AC power supply. Both boards
have connectors for LiPo batteries, which are represented by the battery
power supply.

The H8 Homlet is a set-top box design. The DC input jack is wired to the
ACIN pins, but there are no battery connectors.

Enable these power supplies in the device tree.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

show more ...

ARM: dts: sunxi: Enable Broadcom-based Bluetooth for multiple boards

This patch adds the Bluetooth node, and the underlying UART node if it's
missing, to the board device tree file for several board

ARM: dts: sunxi: Enable Broadcom-based Bluetooth for multiple boards

This patch adds the Bluetooth node, and the underlying UART node if it's
missing, to the board device tree file for several boards. The LPO clock
is also added to the WiFi side's power sequencing node if it's missing,
to correctly represent the shared connections. There is also a PCM
connection for Bluetooth, but this is not covered in this patch.

These boards all have a WiFi+BT module from AMPAK, which contains one or
two Broadcom chips, depending on the model. The older AP6210 contains
two, while the newer AP6212 and AP6330 contain just one, as they use
two-in-one combo chips.

The Bluetooth side of the module is always connected to a UART on the
same pingroup as the SDIO pins for the WiFi side, in a 4 wire
configuration. Power to the VBAT and VDDIO pins are provided either by
the PMIC, using one or several of its regulator outputs, or other fixed
regulators on the board. The VBAT and VDDIO pins are shared with the
WiFi side, which would correspond to vmmc-supply and vqmmc-supply in the
mmc host node. A clock output from the SoC or the external X-Powers RTC
provides the LPO low power clock at 32.768 kHz.

All the boards covered in this patch are ones that do not require extra
changes to the SoC's dtsi file. For the remaining boards that I have
worked on, properties or device nodes for the LPO clock's source are
missing.

For the Cubietruck, the LPO clock is fed from CLK_OUT_A, which needs to
be muxed on pin PI12. This can be represented in multiple ways. This
patch puts the pinctrl property in the pin controller node. This is due
to limitations in Linux, where pinmux settings, even the same one, can
not be shared by multiple devices. Thus we cannot put it in both the
WiFi and Bluetooth device nodes. Putting it the CCU node is another
option, but Linux's CCU driver does not handle pinctrl. Also the pin
controller is guaranteed to be initialized after the CCU, when clocks
are available. And any other devices that use muxed pins are guaranteed
to be initialized after the pin controller. Thus having the CLK_OUT_A
pinmux reference be in the pin controller node is a good choice without
having to deal with implementation issues.

Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>

show more ...

ARM: dts: sun8i: a83t: Add CPU regulator supplies for A83T boards

The OPPs for the A83T CPU cores were added in v4.17 in commit 2db639d8c166
("ARM: dts: sun8i: a83t: add stable OPP tables and CPUfre

ARM: dts: sun8i: a83t: Add CPU regulator supplies for A83T boards

The OPPs for the A83T CPU cores were added in v4.17 in commit 2db639d8c166
("ARM: dts: sun8i: a83t: add stable OPP tables and CPUfreq"), but board
level regulator supplies for the CPU clusters were only added for the
TBS-A711 tablet. This means the other A83T boards do not benefit from
voltage scaling, or worse, if the implementation does not scale the
frequency when the voltage is fixed, no benefit at all.

Add board level CPU cluster power supplies to all the A83T development
boards, so they can have proper dynamic CPU voltage and frequency scaling.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

show more ...