Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core & protocols:

- Wrap datapath globals into net_align

Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core & protocols:

- Wrap datapath globals into net_aligned_data, to avoid false sharing

- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)

- Add SO_INQ and SCM_INQ support to AF_UNIX

- Add SIOCINQ support to AF_VSOCK

- Add TCP_MAXSEG sockopt to MPTCP

- Add IPv6 force_forwarding sysctl to enable forwarding per interface

- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB

- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users

- Convert TCP send queue handling from tasklet to BH workque

- Improve BPF iteration over TCP sockets to see each socket exactly
once

- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code

- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel
NAPI thread when threaded NAPI gets disabled. Previously thread
would stick around until ifdown due to tricky synchronization

- Allow multicast routing to take effect on locally-generated packets

- Add output interface argument for End.X in segment routing

- MCTP: add support for gateway routing, improve bind() handling

- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink

- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed

- Support NUD_PERMANENT for proxy neighbor entries

- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM

- Add sequence numbers to netconsole messages. Unregister
netconsole's console when all net targets are removed. Code
refactoring. Add a number of selftests

- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup

- Support inspecting ref_tracker state via DebugFS

- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links

- Allow providing upcall pid for the 'execute' command in openvswitch

- Remove DCCP support from Netfilter's conntrack

- Disallow multiple packet duplications in the queuing layer

- Prevent use of deprecated iptables code on PREEMPT_RT

Driver API:

- Support RSS and hashing configuration over ethtool Netlink

- Add dedicated ethtool callbacks for getting and setting hashing
fields

- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc

- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs

- Support traffic classes in devlink rate API for bandwidth
management

- Remove rtnl_lock dependency from UDP tunnel port configuration

Device drivers:

- Add a new Broadcom driver for 800G Ethernet (bnge)

- Add a standalone driver for Microchip ZL3073x DPLL

- Remove IBM's NETIUCV device driver

- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)

- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping

- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583

- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x

- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info

- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is
used by TKIP, not only WEP)
- improvements for unsolicited probe response handling

- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device

- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS

- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading"

* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
dpll: zl3073x: Fix build failure
selftests: bpf: fix legacy netfilter options
ipv6: annotate data-races around rt->fib6_nsiblings
ipv6: fix possible infinite loop in fib6_info_uses_dev()
ipv6: prevent infinite loop in rt6_nlmsg_size()
ipv6: add a retry logic in net6_rt_notify()
vrf: Drop existing dst reference in vrf_ip6_input_dst
net/sched: taprio: align entry index attr validation with mqprio
net: fsl_pq_mdio: use dev_err_probe
selftests: rtnetlink.sh: remove esp4_offload after test
vsock: remove unnecessary null check in vsock_getname()
igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
stmmac: xsk: fix negative overflow of budget in zerocopy mode
dt-bindings: ieee802154: Convert at86rf230.txt yaml format
net: dsa: microchip: Disable PTP function of KSZ8463
net: dsa: microchip: Setup fiber ports for KSZ8463
net: dsa: microchip: Write switch MAC address differently for KSZ8463
net: dsa: microchip: Use different registers for KSZ8463
net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
...

show more ...

Merge branch 'expose-refclk-for-rmii-and-enable-rmii'

Ryan Wanner says:

====================
Expose REFCLK for RMII and enable RMII

This set allows the REFCLK property to be exposed as a dt-proper

Merge branch 'expose-refclk-for-rmii-and-enable-rmii'

Ryan Wanner says:

====================
Expose REFCLK for RMII and enable RMII

This set allows the REFCLK property to be exposed as a dt-property to
properly reflect the correct RMII layout. RMII can take an external or
internal provided REFCLK, since this is not SoC dependent but board
dependent this must be exposed as a DT property for the macb driver.

This set also enables RMII mode for the SAMA7 SoCs gigabit mac.

v1: https://lore.kernel.org/cover.1750346271.git.Ryan.Wanner@microchip.com
====================

Link: https://patch.msgid.link/cover.1752510727.git.Ryan.Wanner@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

dt-bindings: net: cdns,macb: Add external REFCLK property

REFCLK can be provided by an external source so this should be exposed
by a DT property. The REFCLK is used for RMII and in some SoCs that u

dt-bindings: net: cdns,macb: Add external REFCLK property

REFCLK can be provided by an external source so this should be exposed
by a DT property. The REFCLK is used for RMII and in some SoCs that use
this driver the RGMII 125MHz clk can also be provided by an external
source.

Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/d558467c4d5b27fb3135ffdead800b14cd9c6c0a.1752510727.git.Ryan.Wanner@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

dt-bindings: net: cdns,macb: add sama7d65 ethernet interface

This patch set adds all the supported FLEXCOMs for the SAMA7D65 SoC.
This also adds the GMAC interfaces and enables GMAC0 interface for
t

dt-bindings: net: cdns,macb: add sama7d65 ethernet interface

This patch set adds all the supported FLEXCOMs for the SAMA7D65 SoC.
This also adds the GMAC interfaces and enables GMAC0 interface for
the SAMA7D65 SoC.

With the FLEXCOMs added to the SoC the MCP16502 and the MAC address
EEPROM are both added to flexcom10.

The dt-binding for USART is here [1]. And the dt-binding for DMA has
been applied here [2].

The original thread for this is here [3]. The applied changes have been
removed for this resend

[1] https://lore.kernel.org/20250306160318.vhPzJLjl19Vq9am9RRbuv5ddmQ6GCEND-YNvPKKtAtU@z
[2] https://lore.kernel.org/174065806827.367410.5368210992879330466.b4-ty@kernel.org
[3] https://lore.kernel.org/392b078b38d15f6adf88771113043044f31e8cd6.1743523114.git.Ryan.Wanner@microchip.com

Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/35808b7cee5ba5b2ce55d741ae1ada0f1cd2f7cb.1750694691.git.Ryan.Wanner@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.16 merge window.

Merge drm/drm-next into drm-intel-gt-next

Need to pull in a67221b5eb8d ("drm/i915/dp: Return min bpc supported by source instead of 0")
in order to fix build breakage on GCC 9.4.0 (from Ubuntu 20.04

Merge drm/drm-next into drm-intel-gt-next

Need to pull in a67221b5eb8d ("drm/i915/dp: Return min bpc supported by source instead of 0")
in order to fix build breakage on GCC 9.4.0 (from Ubuntu 20.04).

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Backmerge to sync with v6.15-rc, xe, and specifically async flip changes
in drm-misc.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge tag 'v6.15-rc6' into next

Sync up with mainline to bring in xpad controller changes.

Merge remote-tracking branch 'drm-misc/drm-misc-next' into msm-next

Merge drm-misc-next to get commit Fixes: fec450ca15af ("drm/display:
hdmi: provide central data authority for ACR params").

Signe

Merge remote-tracking branch 'drm-misc/drm-misc-next' into msm-next

Merge drm-misc-next to get commit Fixes: fec450ca15af ("drm/display:
hdmi: provide central data authority for ACR params").

Signed-off-by: Rob Clark <robdclark@chromium.org>

show more ...

Merge drm/drm-next into drm-xe-next

Backmerge to bring in linux 6.15-rc.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge tag 'v6.15-rc1' into x86/cpu, to refresh the branch with upstream changes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'v6.15-rc1' into x86/asm, to refresh the branch

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge drm/drm-fixes into drm-misc-fixes

Backmerging to get updates from v6.15-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.15-rc1 into drm-misc-next. Also fixes a
build issue when enabling CONFIG_DRM_SCHED_KUNIT_TEST.

Signed-off-by: Thomas Zimmermann <tzimmerm

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.15-rc1 into drm-misc-next. Also fixes a
build issue when enabling CONFIG_DRM_SCHED_KUNIT_TEST.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

show more ...

Merge tag 'soc-dt-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC devicetree updates from Arnd Bergmann:
"There is new support for additional on-chip devices on Apple,
Med

Merge tag 'soc-dt-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC devicetree updates from Arnd Bergmann:
"There is new support for additional on-chip devices on Apple,
Mediatek, Renesas, Rockchip, Samsung, Google, TI, ST, Nvidia and
Amlogic devices.

The Arm Morello reference platform gets a devicetree for booting in
normal aarch64 mode. The hardware supports experimental CHERI support,
which requires a modified kernel.

The AMD (formerly Xilinx) Versal NET SoC gets added, this is a
combined FPGA with Cortex-A78 CPUs in a SoC.

Six new ST STM32MP2 SoC variants are added. Like the earlier
STM32MP25, the MP211, MP213, MP215, MP231, MP233 and MP235 models are
based on one or two Cortex-A35 cores but each feature a different set
of I/O devices.

Mediatek MT8370 is a minor variation of MT8390 with fewer CPU and GPU
cores

Apple T2 is the baseboard management controller on earlier Intel CPU
based Macs, with 16 models now gaining initial support.

All the above come with dts files for the reference boards. In
addition, these boards are added for the SoCs that are already
supported:

- The Milk-V Jupiter board based on SpacemiT K1/M1

- NetCube Systems Kumquat board based on the 32-bit Allwinner V3s SoC

- Three boards based on 32-bit stm32mp1

- 11 distinct board variants from Toradex and one from Variscite, all
based on i.MX6

- Google Pixel Pro 6 phone based on gs101 (Tensor)

- Three additional variants of the i.MX8MP based "Skov" board

- A second variant of the i.MX95 EVK board

- Two boards based on Renesas SoCs

- Four boards based the Rockchip RK35xx series, plus the RK3588 'MNT
Reform 2' laptop"

* tag 'soc-dt-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (538 commits)
arm64: dts: Add gpio_intc node for Amlogic A5 SoCs
arm64: dts: Add gpio_intc node for Amlogic A4 SoCs
arm64: dts: hi3660: Add property for fixing CPUIdle
arm64: dts: rockchip: remove ethm0_clk0_25m_out from Sige5 gmac0
arm64: dts: marvell: Use preferred node names for "simple-bus"
arm64: dts: marvell: Drop unused CP11X_TYPE define
arm64: dts: marvell: Move arch timer and pmu nodes to top-level
arm64: dts: rockchip: Fix PWM pinctrl names
arm64: dts: rockchip: fix RK3576 SCMI clock IDs
dt-bindings: clock: rk3576: add SCMI clocks
arm64: dts: rockchip: Fix pcie reset gpio on Orange Pi 5 Max
arm64: dts: amd/seattle: Drop undocumented "spi-controller" properties
arm64: dts: amd/seattle: Fix bus, mmc, and ethernet node names
arm64: dts: amd/seattle: Move and simplify fixed clocks
arm64: dts: amd/seattle: Base Overdrive B1 on top of B0 version
arm64: dts: rockchip: Enable HDMI audio output for ArmSoM Sige7
arm64: dts: rockchip: Enable onboard eMMC on Radxa E20C
arm64: dts: rockchip: Add SDHCI controller for RK3528
arm64: dts: rockchip: Remove bluetooth node from rock-3a
arm64: dts: rockchip: Move rk356x scmi SHMEM to reserved memory
...

show more ...

Merge tag 'zynqmp-dt-for-6.14' of https://github.com/Xilinx/linux-xlnx into soc/dt

arm64: ZynqMP DT changes for 6.15

- Align clock nodes with DT binding
- Add the first VN-X Versal NET board
- Move

Merge tag 'zynqmp-dt-for-6.14' of https://github.com/Xilinx/linux-xlnx into soc/dt

arm64: ZynqMP DT changes for 6.15

- Align clock nodes with DT binding
- Add the first VN-X Versal NET board
- Move constants out of DT bindings

* tag 'zynqmp-dt-for-6.14' of https://github.com/Xilinx/linux-xlnx:
dt-bindings: xilinx: Deprecate header with firmware constants
arm64: zynqmp: Use DT header for firmware constants
arm64: versal-net: Add description for b2197-00 revA board
dt-bindings: soc: Add new VN-X board description based on Versal NET
arm64: zynqmp: add clock-output-names property in clock nodes

Link: https://lore.kernel.org/r/CAHTX3d+u1VmxP4vm0peQS-ST7o0BuCpKUPRVCSLMfAAb=eV3Xg@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

dt-bindings: xilinx: Deprecate header with firmware constants

Firmware contants do not fit the purpose of bindings because they are not
independent IDs for abstractions. They are more or less just c

dt-bindings: xilinx: Deprecate header with firmware constants

Firmware contants do not fit the purpose of bindings because they are not
independent IDs for abstractions. They are more or less just contants which
better to wire via header with DT which is using it.
That's why add deprecated message to dt binding header and also update
existing dt bindings not to use macros from the header and replace them by
it's value. Actually value is not relevant because it is only example.

The similar changes have been done by commit 9d9292576810 ("dt-bindings:
pinctrl: samsung: deprecate header with register constants").

Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/2a6f0229522327939e6893565e540b75f854a37b.1738600745.git.michal.simek@amd.com

show more ...

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and we are stuck at 6.9 so lets bump things forward.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge branch 'ib/6.11-rc6-matrix-keypad-spitz' into next

Bring in changes removing support for platform data from matrix-keypad
driver.

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter and allows further pending refactors.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

show more ...

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be a

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be able to be mapped at the address specified by the "reserve_mem" command
line parameter.

Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

show more ...

Merge drm/drm-next into drm-misc-next

Get drm-misc-next to the state of v6.11-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'linus' into x86/mm

Bring x86 and selftests up to date

Merge drm/drm-next into drm-intel-next

Sync with v6.11-rc1 in general, and specifically get the new
BACKLIGHT_POWER_ constants for power states.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>