1# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/net/bluetooth/nxp,88w8987-bt.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: NXP Bluetooth chips 8 9description: 10 This binding describes UART-attached NXP bluetooth chips. These chips 11 are dual-radio chips supporting WiFi and Bluetooth. The bluetooth 12 works on standard H4 protocol over 4-wire UART. The RTS and CTS lines 13 are used during FW download. To enable power save mode, the host 14 asserts break signal over UART-TX line to put the chip into power save 15 state. De-asserting break wakes up the BT chip. 16 17maintainers: 18 - Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> 19 20properties: 21 compatible: 22 enum: 23 - nxp,88w8987-bt 24 - nxp,88w8997-bt 25 26 fw-init-baudrate: 27 $ref: /schemas/types.yaml#/definitions/uint32 28 default: 115200 29 description: 30 Chip baudrate after FW is downloaded and initialized. 31 This property depends on the module vendor's 32 configuration. 33 34 firmware-name: 35 maxItems: 1 36 37required: 38 - compatible 39 40additionalProperties: false 41 42examples: 43 - | 44 serial { 45 bluetooth { 46 compatible = "nxp,88w8987-bt"; 47 fw-init-baudrate = <3000000>; 48 firmware-name = "uartuart8987_bt_v0.bin"; 49 }; 50 }; 51