1# SPDX-License-Identifier: GPL-2.0 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/gnss/u-blox,neo-6m.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: U-blox GNSS Receiver 8 9allOf: 10 - $ref: gnss-common.yaml# 11 12maintainers: 13 - Johan Hovold <johan@kernel.org> 14 15description: > 16 The U-blox GNSS receivers can use UART, DDC (I2C), SPI and USB interfaces. 17 18properties: 19 compatible: 20 enum: 21 - u-blox,neo-6m 22 - u-blox,neo-8 23 - u-blox,neo-m8 24 25 reg: 26 description: > 27 The DDC Slave Address, SPI chip select address, the number of the USB hub 28 port or the USB host-controller port to which this device is attached, 29 depending on the bus used. Required for the DDC, SPI or USB busses. 30 31 vcc-supply: 32 description: > 33 Main voltage regulator 34 35 u-blox,extint-gpios: 36 maxItems: 1 37 description: > 38 GPIO connected to the "external interrupt" input pin 39 40 v-bckp-supply: 41 description: > 42 Backup voltage regulator 43 44required: 45 - compatible 46 - vcc-supply 47 48unevaluatedProperties: false 49 50examples: 51 - | 52 serial { 53 gnss { 54 compatible = "u-blox,neo-8"; 55 v-bckp-supply = <&gnss_v_bckp_reg>; 56 vcc-supply = <&gnss_vcc_reg>; 57 }; 58 }; 59