xref: /qemu/trace-events (revision 94b0b5ff5f5c3ab946fa926d464738edb3713ed4)

# Trace events for debugging and performance instrumentation
#
# This file is processed by the tracetool script during the build.
#
# To add a new trace event:
#
# 1. Choose a name for the trace event.  Declare its arguments and format
#    string.
#
# 2. Call the trace event from code using trace_##name, e.g. multiwrite_cb() ->
#    trace_multiwrite_cb().  The source file must #include "trace.h".
#
# Format of a trace event:
#
# [disable] <name>(<type1> <arg1>[, <type2> <arg2>] ...) "<format-string>"
#
# Example: qemu_malloc(size_t size) "size %zu"
#
# The "disable" keyword will build without the trace event.
# In case of 'simple' trace backend, it will allow the trace event to be
# compiled, but this would be turned off by default. It can be toggled on via
# the monitor.
#
# The <name> must be a valid as a C function name.
#
# Types should be standard C types.  Use void * for pointers because the trace
# system may not have the necessary headers included.
#
# The <format-string> should be a sprintf()-compatible format string.

# qemu-malloc.c
disable qemu_malloc(size_t size, void *ptr) "size %zu ptr %p"
disable qemu_realloc(void *ptr, size_t size, void *newptr) "ptr %p size %zu newptr %p"
disable qemu_free(void *ptr) "ptr %p"

# osdep.c
disable qemu_memalign(size_t alignment, size_t size, void *ptr) "alignment %zu size %zu ptr %p"
disable qemu_vmalloc(size_t size, void *ptr) "size %zu ptr %p"
disable qemu_vfree(void *ptr) "ptr %p"

# hw/virtio.c
disable virtqueue_fill(void *vq, const void *elem, unsigned int len, unsigned int idx) "vq %p elem %p len %u idx %u"
disable virtqueue_flush(void *vq, unsigned int count) "vq %p count %u"
disable virtqueue_pop(void *vq, void *elem, unsigned int in_num, unsigned int out_num) "vq %p elem %p in_num %u out_num %u"
disable virtio_queue_notify(void *vdev, int n, void *vq) "vdev %p n %d vq %p"
disable virtio_irq(void *vq) "vq %p"
disable virtio_notify(void *vdev, void *vq) "vdev %p vq %p"

# block.c
disable multiwrite_cb(void *mcb, int ret) "mcb %p ret %d"
disable bdrv_aio_multiwrite(void *mcb, int num_callbacks, int num_reqs) "mcb %p num_callbacks %d num_reqs %d"
disable bdrv_aio_multiwrite_earlyfail(void *mcb) "mcb %p"
disable bdrv_aio_multiwrite_latefail(void *mcb, int i) "mcb %p i %d"
disable bdrv_aio_readv(void *bs, int64_t sector_num, int nb_sectors, void *opaque) "bs %p sector_num %"PRId64" nb_sectors %d opaque %p"
disable bdrv_aio_writev(void *bs, int64_t sector_num, int nb_sectors, void *opaque) "bs %p sector_num %"PRId64" nb_sectors %d opaque %p"

# hw/virtio-blk.c
disable virtio_blk_req_complete(void *req, int status) "req %p status %d"
disable virtio_blk_rw_complete(void *req, int ret) "req %p ret %d"
disable virtio_blk_handle_write(void *req, uint64_t sector, size_t nsectors) "req %p sector %"PRIu64" nsectors %zu"

# posix-aio-compat.c
disable paio_submit(void *acb, void *opaque, int64_t sector_num, int nb_sectors, int type) "acb %p opaque %p sector_num %"PRId64" nb_sectors %d type %d"

# ioport.c
disable cpu_in(unsigned int addr, unsigned int val) "addr %#x value %u"
disable cpu_out(unsigned int addr, unsigned int val) "addr %#x value %u"

# balloon.c
# Since requests are raised via monitor, not many tracepoints are needed.
disable balloon_event(void *opaque, unsigned long addr) "opaque %p addr %lu"

# hw/apic.c
disable apic_local_deliver(int vector, uint32_t lvt) "vector %d delivery mode %d"
disable apic_deliver_irq(uint8_t dest, uint8_t dest_mode, uint8_t delivery_mode, uint8_t vector_num, uint8_t polarity, uint8_t trigger_mode) "dest %d dest_mode %d delivery_mode %d vector %d polarity %d trigger_mode %d"
disable cpu_set_apic_base(uint64_t val) "%016"PRIx64""
disable cpu_get_apic_base(uint64_t val) "%016"PRIx64""
disable apic_mem_readl(uint64_t addr, uint32_t val)  "%"PRIx64" = %08x"
disable apic_mem_writel(uint64_t addr, uint32_t val) "%"PRIx64" = %08x"
# coalescing
disable apic_reset_irq_delivered(int apic_irq_delivered) "old coalescing %d"
disable apic_get_irq_delivered(int apic_irq_delivered) "returning coalescing %d"
disable apic_set_irq(int apic_irq_delivered) "coalescing %d"

# hw/cs4231.c
disable cs4231_mem_readl_dreg(uint32_t reg, uint32_t ret) "read dreg %d: 0x%02x"
disable cs4231_mem_readl_reg(uint32_t reg, uint32_t ret) "read reg %d: 0x%08x"
disable cs4231_mem_writel_reg(uint32_t reg, uint32_t old, uint32_t val) "write reg %d: 0x%08x -> 0x%08x"
disable cs4231_mem_writel_dreg(uint32_t reg, uint32_t old, uint32_t val) "write dreg %d: 0x%02x -> 0x%02x"

# hw/eccmemctl.c
disable ecc_mem_writel_mer(uint32_t val) "Write memory enable %08x"
disable ecc_mem_writel_mdr(uint32_t val) "Write memory delay %08x"
disable ecc_mem_writel_mfsr(uint32_t val) "Write memory fault status %08x"
disable ecc_mem_writel_vcr(uint32_t val) "Write slot configuration %08x"
disable ecc_mem_writel_dr(uint32_t val) "Write diagnostic %08x"
disable ecc_mem_writel_ecr0(uint32_t val) "Write event count 1 %08x"
disable ecc_mem_writel_ecr1(uint32_t val) "Write event count 2 %08x"
disable ecc_mem_readl_mer(uint32_t ret) "Read memory enable %08x"
disable ecc_mem_readl_mdr(uint32_t ret) "Read memory delay %08x"
disable ecc_mem_readl_mfsr(uint32_t ret) "Read memory fault status %08x"
disable ecc_mem_readl_vcr(uint32_t ret) "Read slot configuration %08x"
disable ecc_mem_readl_mfar0(uint32_t ret) "Read memory fault address 0 %08x"
disable ecc_mem_readl_mfar1(uint32_t ret) "Read memory fault address 1 %08x"
disable ecc_mem_readl_dr(uint32_t ret) "Read diagnostic %08x"
disable ecc_mem_readl_ecr0(uint32_t ret) "Read event count 1 %08x"
disable ecc_mem_readl_ecr1(uint32_t ret) "Read event count 2 %08x"
disable ecc_diag_mem_writeb(uint64_t addr, uint32_t val) "Write diagnostic %"PRId64" = %02x"
disable ecc_diag_mem_readb(uint64_t addr, uint32_t ret) "Read diagnostic %"PRId64"= %02x"

# hw/lance.c
disable lance_mem_readw(uint64_t addr, uint32_t ret) "addr=%"PRIx64"val=0x%04x"
disable lance_mem_writew(uint64_t addr, uint32_t val) "addr=%"PRIx64"val=0x%04x"

# hw/slavio_intctl.c
disable slavio_intctl_mem_readl(uint32_t cpu, uint64_t addr, uint32_t ret) "read cpu %d reg 0x%"PRIx64" = %x"
disable slavio_intctl_mem_writel(uint32_t cpu, uint64_t addr, uint32_t val) "write cpu %d reg 0x%"PRIx64" = %x"
disable slavio_intctl_mem_writel_clear(uint32_t cpu, uint32_t val, uint32_t intreg_pending) "Cleared cpu %d irq mask %x, curmask %x"
disable slavio_intctl_mem_writel_set(uint32_t cpu, uint32_t val, uint32_t intreg_pending) "Set cpu %d irq mask %x, curmask %x"
disable slavio_intctlm_mem_readl(uint64_t addr, uint32_t ret) "read system reg 0x%"PRIx64" = %x"
disable slavio_intctlm_mem_writel(uint64_t addr, uint32_t val) "write system reg 0x%"PRIx64" = %x"
disable slavio_intctlm_mem_writel_enable(uint32_t val, uint32_t intregm_disabled) "Enabled master irq mask %x, curmask %x"
disable slavio_intctlm_mem_writel_disable(uint32_t val, uint32_t intregm_disabled) "Disabled master irq mask %x, curmask %x"
disable slavio_intctlm_mem_writel_target(uint32_t cpu) "Set master irq cpu %d"
disable slavio_check_interrupts(uint32_t pending, uint32_t intregm_disabled) "pending %x disabled %x"
disable slavio_set_irq(uint32_t target_cpu, int irq, uint32_t pil, int level) "Set cpu %d irq %d -> pil %d level %d"
disable slavio_set_timer_irq_cpu(int cpu, int level) "Set cpu %d local timer level %d"

# hw/slavio_misc.c
disable slavio_misc_update_irq_raise(void) "Raise IRQ"
disable slavio_misc_update_irq_lower(void) "Lower IRQ"
disable slavio_set_power_fail(int power_failing, uint8_t config) "Power fail: %d, config: %d"
disable slavio_cfg_mem_writeb(uint32_t val) "Write config %02x"
disable slavio_cfg_mem_readb(uint32_t ret) "Read config %02x"
disable slavio_diag_mem_writeb(uint32_t val) "Write diag %02x"
disable slavio_diag_mem_readb(uint32_t ret) "Read diag %02x"
disable slavio_mdm_mem_writeb(uint32_t val) "Write modem control %02x"
disable slavio_mdm_mem_readb(uint32_t ret) "Read modem control %02x"
disable slavio_aux1_mem_writeb(uint32_t val) "Write aux1 %02x"
disable slavio_aux1_mem_readb(uint32_t ret) "Read aux1 %02x"
disable slavio_aux2_mem_writeb(uint32_t val) "Write aux2 %02x"
disable slavio_aux2_mem_readb(uint32_t ret) "Read aux2 %02x"
disable apc_mem_writeb(uint32_t val) "Write power management %02x"
disable apc_mem_readb(uint32_t ret) "Read power management %02x"
disable slavio_sysctrl_mem_writel(uint32_t val) "Write system control %08x"
disable slavio_sysctrl_mem_readl(uint32_t ret) "Read system control %08x"
disable slavio_led_mem_writew(uint32_t val) "Write diagnostic LED %04x"
disable slavio_led_mem_readw(uint32_t ret) "Read diagnostic LED %04x"

# hw/slavio_timer.c
disable slavio_timer_get_out(uint64_t limit, uint32_t counthigh, uint32_t count) "limit %"PRIx64" count %x%08x"
disable slavio_timer_irq(uint32_t counthigh, uint32_t count) "callback: count %x%08x"
disable slavio_timer_mem_readl_invalid(uint64_t addr) "invalid read address %"PRIx64""
disable slavio_timer_mem_readl(uint64_t addr, uint32_t ret) "read %"PRIx64" = %08x"
disable slavio_timer_mem_writel(uint64_t addr, uint32_t val) "write %"PRIx64" = %08x"
disable slavio_timer_mem_writel_limit(unsigned int timer_index, uint64_t count) "processor %d user timer set to %016"PRIx64""
disable slavio_timer_mem_writel_counter_invalid(void) "not user timer"
disable slavio_timer_mem_writel_status_start(unsigned int timer_index) "processor %d user timer started"
disable slavio_timer_mem_writel_status_stop(unsigned int timer_index) "processor %d user timer stopped"
disable slavio_timer_mem_writel_mode_user(unsigned int timer_index) "processor %d changed from counter to user timer"
disable slavio_timer_mem_writel_mode_counter(unsigned int timer_index) "processor %d changed from user timer to counter"
disable slavio_timer_mem_writel_mode_invalid(void) "not system timer"
disable slavio_timer_mem_writel_invalid(uint64_t addr) "invalid write address %"PRIx64""

# hw/sparc32_dma.c
disable ledma_memory_read(uint64_t addr) "DMA read addr 0x%"PRIx64""
disable ledma_memory_write(uint64_t addr) "DMA write addr 0x%"PRIx64""
disable sparc32_dma_set_irq_raise(void) "Raise IRQ"
disable sparc32_dma_set_irq_lower(void) "Lower IRQ"
disable espdma_memory_read(uint32_t addr) "DMA read addr 0x%08x"
disable espdma_memory_write(uint32_t addr) "DMA write addr 0x%08x"
disable sparc32_dma_mem_readl(uint64_t addr, uint32_t ret) "read dmareg %"PRIx64": 0x%08x"
disable sparc32_dma_mem_writel(uint64_t addr, uint32_t old, uint32_t val) "write dmareg %"PRIx64": 0x%08x -> 0x%08x"
disable sparc32_dma_enable_raise(void) "Raise DMA enable"
disable sparc32_dma_enable_lower(void) "Lower DMA enable"

# hw/sun4m.c
disable sun4m_cpu_interrupt(unsigned int level) "Set CPU IRQ %d"
disable sun4m_cpu_reset_interrupt(unsigned int level) "Reset CPU IRQ %d"
disable sun4m_cpu_set_irq_raise(int level) "Raise CPU IRQ %d"
disable sun4m_cpu_set_irq_lower(int level) "Lower CPU IRQ %d"

# hw/sun4m_iommu.c
disable sun4m_iommu_mem_readl(uint64_t addr, uint32_t ret) "read reg[%"PRIx64"] = %x"
disable sun4m_iommu_mem_writel(uint64_t addr, uint32_t val) "write reg[%"PRIx64"] = %x"
disable sun4m_iommu_mem_writel_ctrl(uint64_t iostart) "iostart = %"PRIx64""
disable sun4m_iommu_mem_writel_tlbflush(uint32_t val) "tlb flush %x"
disable sun4m_iommu_mem_writel_pgflush(uint32_t val) "page flush %x"
disable sun4m_iommu_page_get_flags(uint64_t pa, uint64_t iopte, uint32_t ret) "get flags addr %"PRIx64" => pte %"PRIx64", *pte = %x"
disable sun4m_iommu_translate_pa(uint64_t addr, uint64_t pa, uint32_t iopte) "xlate dva %"PRIx64" => pa %"PRIx64" iopte = %x"
disable sun4m_iommu_bad_addr(uint64_t addr) "bad addr %"PRIx64""

# vl.c
disable vm_state_notify(int running, int reason) "running %d reason %d"