1 /* 2 * IDE test cases 3 * 4 * Copyright (c) 2013 Kevin Wolf <kwolf@redhat.com> 5 * 6 * Permission is hereby granted, free of charge, to any person obtaining a copy 7 * of this software and associated documentation files (the "Software"), to deal 8 * in the Software without restriction, including without limitation the rights 9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 10 * copies of the Software, and to permit persons to whom the Software is 11 * furnished to do so, subject to the following conditions: 12 * 13 * The above copyright notice and this permission notice shall be included in 14 * all copies or substantial portions of the Software. 15 * 16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 22 * THE SOFTWARE. 23 */ 24 25 #include "qemu/osdep.h" 26 27 28 #include "libqtest.h" 29 #include "libqos/libqos.h" 30 #include "libqos/pci-pc.h" 31 #include "libqos/malloc-pc.h" 32 33 #include "qemu-common.h" 34 #include "qemu/bswap.h" 35 #include "hw/pci/pci_ids.h" 36 #include "hw/pci/pci_regs.h" 37 38 #define TEST_IMAGE_SIZE 64 * 1024 * 1024 39 40 #define IDE_PCI_DEV 1 41 #define IDE_PCI_FUNC 1 42 43 #define IDE_BASE 0x1f0 44 #define IDE_PRIMARY_IRQ 14 45 46 #define ATAPI_BLOCK_SIZE 2048 47 48 /* How many bytes to receive via ATAPI PIO at one time. 49 * Must be less than 0xFFFF. */ 50 #define BYTE_COUNT_LIMIT 5120 51 52 enum { 53 reg_data = 0x0, 54 reg_feature = 0x1, 55 reg_nsectors = 0x2, 56 reg_lba_low = 0x3, 57 reg_lba_middle = 0x4, 58 reg_lba_high = 0x5, 59 reg_device = 0x6, 60 reg_status = 0x7, 61 reg_command = 0x7, 62 }; 63 64 enum { 65 BSY = 0x80, 66 DRDY = 0x40, 67 DF = 0x20, 68 DRQ = 0x08, 69 ERR = 0x01, 70 }; 71 72 enum { 73 DEV = 0x10, 74 LBA = 0x40, 75 }; 76 77 enum { 78 bmreg_cmd = 0x0, 79 bmreg_status = 0x2, 80 bmreg_prdt = 0x4, 81 }; 82 83 enum { 84 CMD_READ_DMA = 0xc8, 85 CMD_WRITE_DMA = 0xca, 86 CMD_FLUSH_CACHE = 0xe7, 87 CMD_IDENTIFY = 0xec, 88 CMD_PACKET = 0xa0, 89 90 CMDF_ABORT = 0x100, 91 CMDF_NO_BM = 0x200, 92 }; 93 94 enum { 95 BM_CMD_START = 0x1, 96 BM_CMD_WRITE = 0x8, /* write = from device to memory */ 97 }; 98 99 enum { 100 BM_STS_ACTIVE = 0x1, 101 BM_STS_ERROR = 0x2, 102 BM_STS_INTR = 0x4, 103 }; 104 105 enum { 106 PRDT_EOT = 0x80000000, 107 }; 108 109 #define assert_bit_set(data, mask) g_assert_cmphex((data) & (mask), ==, (mask)) 110 #define assert_bit_clear(data, mask) g_assert_cmphex((data) & (mask), ==, 0) 111 112 static QPCIBus *pcibus = NULL; 113 static QGuestAllocator *guest_malloc; 114 115 static char tmp_path[] = "/tmp/qtest.XXXXXX"; 116 static char debug_path[] = "/tmp/qtest-blkdebug.XXXXXX"; 117 118 static void ide_test_start(const char *cmdline_fmt, ...) 119 { 120 va_list ap; 121 char *cmdline; 122 123 va_start(ap, cmdline_fmt); 124 cmdline = g_strdup_vprintf(cmdline_fmt, ap); 125 va_end(ap); 126 127 qtest_start(cmdline); 128 guest_malloc = pc_alloc_init(); 129 130 g_free(cmdline); 131 } 132 133 static void ide_test_quit(void) 134 { 135 pc_alloc_uninit(guest_malloc); 136 guest_malloc = NULL; 137 qtest_end(); 138 } 139 140 static QPCIDevice *get_pci_device(uint16_t *bmdma_base) 141 { 142 QPCIDevice *dev; 143 uint16_t vendor_id, device_id; 144 145 if (!pcibus) { 146 pcibus = qpci_init_pc(); 147 } 148 149 /* Find PCI device and verify it's the right one */ 150 dev = qpci_device_find(pcibus, QPCI_DEVFN(IDE_PCI_DEV, IDE_PCI_FUNC)); 151 g_assert(dev != NULL); 152 153 vendor_id = qpci_config_readw(dev, PCI_VENDOR_ID); 154 device_id = qpci_config_readw(dev, PCI_DEVICE_ID); 155 g_assert(vendor_id == PCI_VENDOR_ID_INTEL); 156 g_assert(device_id == PCI_DEVICE_ID_INTEL_82371SB_1); 157 158 /* Map bmdma BAR */ 159 *bmdma_base = (uint16_t)(uintptr_t) qpci_iomap(dev, 4, NULL); 160 161 qpci_device_enable(dev); 162 163 return dev; 164 } 165 166 static void free_pci_device(QPCIDevice *dev) 167 { 168 /* libqos doesn't have a function for this, so free it manually */ 169 g_free(dev); 170 } 171 172 typedef struct PrdtEntry { 173 uint32_t addr; 174 uint32_t size; 175 } QEMU_PACKED PrdtEntry; 176 177 #define assert_bit_set(data, mask) g_assert_cmphex((data) & (mask), ==, (mask)) 178 #define assert_bit_clear(data, mask) g_assert_cmphex((data) & (mask), ==, 0) 179 180 static int send_dma_request(int cmd, uint64_t sector, int nb_sectors, 181 PrdtEntry *prdt, int prdt_entries, 182 void(*post_exec)(uint64_t sector, int nb_sectors)) 183 { 184 QPCIDevice *dev; 185 uint16_t bmdma_base; 186 uintptr_t guest_prdt; 187 size_t len; 188 bool from_dev; 189 uint8_t status; 190 int flags; 191 192 dev = get_pci_device(&bmdma_base); 193 194 flags = cmd & ~0xff; 195 cmd &= 0xff; 196 197 switch (cmd) { 198 case CMD_READ_DMA: 199 case CMD_PACKET: 200 /* Assuming we only test data reads w/ ATAPI, otherwise we need to know 201 * the SCSI command being sent in the packet, too. */ 202 from_dev = true; 203 break; 204 case CMD_WRITE_DMA: 205 from_dev = false; 206 break; 207 default: 208 g_assert_not_reached(); 209 } 210 211 if (flags & CMDF_NO_BM) { 212 qpci_config_writew(dev, PCI_COMMAND, 213 PCI_COMMAND_IO | PCI_COMMAND_MEMORY); 214 } 215 216 /* Select device 0 */ 217 outb(IDE_BASE + reg_device, 0 | LBA); 218 219 /* Stop any running transfer, clear any pending interrupt */ 220 outb(bmdma_base + bmreg_cmd, 0); 221 outb(bmdma_base + bmreg_status, BM_STS_INTR); 222 223 /* Setup PRDT */ 224 len = sizeof(*prdt) * prdt_entries; 225 guest_prdt = guest_alloc(guest_malloc, len); 226 memwrite(guest_prdt, prdt, len); 227 outl(bmdma_base + bmreg_prdt, guest_prdt); 228 229 /* ATA DMA command */ 230 if (cmd == CMD_PACKET) { 231 /* Enables ATAPI DMA; otherwise PIO is attempted */ 232 outb(IDE_BASE + reg_feature, 0x01); 233 } else { 234 outb(IDE_BASE + reg_nsectors, nb_sectors); 235 outb(IDE_BASE + reg_lba_low, sector & 0xff); 236 outb(IDE_BASE + reg_lba_middle, (sector >> 8) & 0xff); 237 outb(IDE_BASE + reg_lba_high, (sector >> 16) & 0xff); 238 } 239 240 outb(IDE_BASE + reg_command, cmd); 241 242 if (post_exec) { 243 post_exec(sector, nb_sectors); 244 } 245 246 /* Start DMA transfer */ 247 outb(bmdma_base + bmreg_cmd, BM_CMD_START | (from_dev ? BM_CMD_WRITE : 0)); 248 249 if (flags & CMDF_ABORT) { 250 outb(bmdma_base + bmreg_cmd, 0); 251 } 252 253 /* Wait for the DMA transfer to complete */ 254 do { 255 status = inb(bmdma_base + bmreg_status); 256 } while ((status & (BM_STS_ACTIVE | BM_STS_INTR)) == BM_STS_ACTIVE); 257 258 g_assert_cmpint(get_irq(IDE_PRIMARY_IRQ), ==, !!(status & BM_STS_INTR)); 259 260 /* Check IDE status code */ 261 assert_bit_set(inb(IDE_BASE + reg_status), DRDY); 262 assert_bit_clear(inb(IDE_BASE + reg_status), BSY | DRQ); 263 264 /* Reading the status register clears the IRQ */ 265 g_assert(!get_irq(IDE_PRIMARY_IRQ)); 266 267 /* Stop DMA transfer if still active */ 268 if (status & BM_STS_ACTIVE) { 269 outb(bmdma_base + bmreg_cmd, 0); 270 } 271 272 free_pci_device(dev); 273 274 return status; 275 } 276 277 static void test_bmdma_simple_rw(void) 278 { 279 uint8_t status; 280 uint8_t *buf; 281 uint8_t *cmpbuf; 282 size_t len = 512; 283 uintptr_t guest_buf = guest_alloc(guest_malloc, len); 284 285 PrdtEntry prdt[] = { 286 { 287 .addr = cpu_to_le32(guest_buf), 288 .size = cpu_to_le32(len | PRDT_EOT), 289 }, 290 }; 291 292 buf = g_malloc(len); 293 cmpbuf = g_malloc(len); 294 295 /* Write 0x55 pattern to sector 0 */ 296 memset(buf, 0x55, len); 297 memwrite(guest_buf, buf, len); 298 299 status = send_dma_request(CMD_WRITE_DMA, 0, 1, prdt, 300 ARRAY_SIZE(prdt), NULL); 301 g_assert_cmphex(status, ==, BM_STS_INTR); 302 assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR); 303 304 /* Write 0xaa pattern to sector 1 */ 305 memset(buf, 0xaa, len); 306 memwrite(guest_buf, buf, len); 307 308 status = send_dma_request(CMD_WRITE_DMA, 1, 1, prdt, 309 ARRAY_SIZE(prdt), NULL); 310 g_assert_cmphex(status, ==, BM_STS_INTR); 311 assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR); 312 313 /* Read and verify 0x55 pattern in sector 0 */ 314 memset(cmpbuf, 0x55, len); 315 316 status = send_dma_request(CMD_READ_DMA, 0, 1, prdt, ARRAY_SIZE(prdt), NULL); 317 g_assert_cmphex(status, ==, BM_STS_INTR); 318 assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR); 319 320 memread(guest_buf, buf, len); 321 g_assert(memcmp(buf, cmpbuf, len) == 0); 322 323 /* Read and verify 0xaa pattern in sector 1 */ 324 memset(cmpbuf, 0xaa, len); 325 326 status = send_dma_request(CMD_READ_DMA, 1, 1, prdt, ARRAY_SIZE(prdt), NULL); 327 g_assert_cmphex(status, ==, BM_STS_INTR); 328 assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR); 329 330 memread(guest_buf, buf, len); 331 g_assert(memcmp(buf, cmpbuf, len) == 0); 332 333 334 g_free(buf); 335 g_free(cmpbuf); 336 } 337 338 static void test_bmdma_short_prdt(void) 339 { 340 uint8_t status; 341 342 PrdtEntry prdt[] = { 343 { 344 .addr = 0, 345 .size = cpu_to_le32(0x10 | PRDT_EOT), 346 }, 347 }; 348 349 /* Normal request */ 350 status = send_dma_request(CMD_READ_DMA, 0, 1, 351 prdt, ARRAY_SIZE(prdt), NULL); 352 g_assert_cmphex(status, ==, 0); 353 assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR); 354 355 /* Abort the request before it completes */ 356 status = send_dma_request(CMD_READ_DMA | CMDF_ABORT, 0, 1, 357 prdt, ARRAY_SIZE(prdt), NULL); 358 g_assert_cmphex(status, ==, 0); 359 assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR); 360 } 361 362 static void test_bmdma_one_sector_short_prdt(void) 363 { 364 uint8_t status; 365 366 /* Read 2 sectors but only give 1 sector in PRDT */ 367 PrdtEntry prdt[] = { 368 { 369 .addr = 0, 370 .size = cpu_to_le32(0x200 | PRDT_EOT), 371 }, 372 }; 373 374 /* Normal request */ 375 status = send_dma_request(CMD_READ_DMA, 0, 2, 376 prdt, ARRAY_SIZE(prdt), NULL); 377 g_assert_cmphex(status, ==, 0); 378 assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR); 379 380 /* Abort the request before it completes */ 381 status = send_dma_request(CMD_READ_DMA | CMDF_ABORT, 0, 2, 382 prdt, ARRAY_SIZE(prdt), NULL); 383 g_assert_cmphex(status, ==, 0); 384 assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR); 385 } 386 387 static void test_bmdma_long_prdt(void) 388 { 389 uint8_t status; 390 391 PrdtEntry prdt[] = { 392 { 393 .addr = 0, 394 .size = cpu_to_le32(0x1000 | PRDT_EOT), 395 }, 396 }; 397 398 /* Normal request */ 399 status = send_dma_request(CMD_READ_DMA, 0, 1, 400 prdt, ARRAY_SIZE(prdt), NULL); 401 g_assert_cmphex(status, ==, BM_STS_ACTIVE | BM_STS_INTR); 402 assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR); 403 404 /* Abort the request before it completes */ 405 status = send_dma_request(CMD_READ_DMA | CMDF_ABORT, 0, 1, 406 prdt, ARRAY_SIZE(prdt), NULL); 407 g_assert_cmphex(status, ==, BM_STS_INTR); 408 assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR); 409 } 410 411 static void test_bmdma_no_busmaster(void) 412 { 413 uint8_t status; 414 415 /* No PRDT_EOT, each entry addr 0/size 64k, and in theory qemu shouldn't be 416 * able to access it anyway because the Bus Master bit in the PCI command 417 * register isn't set. This is complete nonsense, but it used to be pretty 418 * good at confusing and occasionally crashing qemu. */ 419 PrdtEntry prdt[4096] = { }; 420 421 status = send_dma_request(CMD_READ_DMA | CMDF_NO_BM, 0, 512, 422 prdt, ARRAY_SIZE(prdt), NULL); 423 424 /* Not entirely clear what the expected result is, but this is what we get 425 * in practice. At least we want to be aware of any changes. */ 426 g_assert_cmphex(status, ==, BM_STS_ACTIVE | BM_STS_INTR); 427 assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR); 428 } 429 430 static void test_bmdma_setup(void) 431 { 432 ide_test_start( 433 "-drive file=%s,if=ide,serial=%s,cache=writeback,format=raw " 434 "-global ide-hd.ver=%s", 435 tmp_path, "testdisk", "version"); 436 qtest_irq_intercept_in(global_qtest, "ioapic"); 437 } 438 439 static void test_bmdma_teardown(void) 440 { 441 ide_test_quit(); 442 } 443 444 static void string_cpu_to_be16(uint16_t *s, size_t bytes) 445 { 446 g_assert((bytes & 1) == 0); 447 bytes /= 2; 448 449 while (bytes--) { 450 *s = cpu_to_be16(*s); 451 s++; 452 } 453 } 454 455 static void test_identify(void) 456 { 457 uint8_t data; 458 uint16_t buf[256]; 459 int i; 460 int ret; 461 462 ide_test_start( 463 "-drive file=%s,if=ide,serial=%s,cache=writeback,format=raw " 464 "-global ide-hd.ver=%s", 465 tmp_path, "testdisk", "version"); 466 467 /* IDENTIFY command on device 0*/ 468 outb(IDE_BASE + reg_device, 0); 469 outb(IDE_BASE + reg_command, CMD_IDENTIFY); 470 471 /* Read in the IDENTIFY buffer and check registers */ 472 data = inb(IDE_BASE + reg_device); 473 g_assert_cmpint(data & DEV, ==, 0); 474 475 for (i = 0; i < 256; i++) { 476 data = inb(IDE_BASE + reg_status); 477 assert_bit_set(data, DRDY | DRQ); 478 assert_bit_clear(data, BSY | DF | ERR); 479 480 ((uint16_t*) buf)[i] = inw(IDE_BASE + reg_data); 481 } 482 483 data = inb(IDE_BASE + reg_status); 484 assert_bit_set(data, DRDY); 485 assert_bit_clear(data, BSY | DF | ERR | DRQ); 486 487 /* Check serial number/version in the buffer */ 488 string_cpu_to_be16(&buf[10], 20); 489 ret = memcmp(&buf[10], "testdisk ", 20); 490 g_assert(ret == 0); 491 492 string_cpu_to_be16(&buf[23], 8); 493 ret = memcmp(&buf[23], "version ", 8); 494 g_assert(ret == 0); 495 496 /* Write cache enabled bit */ 497 assert_bit_set(buf[85], 0x20); 498 499 ide_test_quit(); 500 } 501 502 static void test_flush(void) 503 { 504 uint8_t data; 505 506 ide_test_start( 507 "-drive file=blkdebug::%s,if=ide,cache=writeback,format=raw", 508 tmp_path); 509 510 /* Delay the completion of the flush request until we explicitly do it */ 511 g_free(hmp("qemu-io ide0-hd0 \"break flush_to_os A\"")); 512 513 /* FLUSH CACHE command on device 0*/ 514 outb(IDE_BASE + reg_device, 0); 515 outb(IDE_BASE + reg_command, CMD_FLUSH_CACHE); 516 517 /* Check status while request is in flight*/ 518 data = inb(IDE_BASE + reg_status); 519 assert_bit_set(data, BSY | DRDY); 520 assert_bit_clear(data, DF | ERR | DRQ); 521 522 /* Complete the command */ 523 g_free(hmp("qemu-io ide0-hd0 \"resume A\"")); 524 525 /* Check registers */ 526 data = inb(IDE_BASE + reg_device); 527 g_assert_cmpint(data & DEV, ==, 0); 528 529 do { 530 data = inb(IDE_BASE + reg_status); 531 } while (data & BSY); 532 533 assert_bit_set(data, DRDY); 534 assert_bit_clear(data, BSY | DF | ERR | DRQ); 535 536 ide_test_quit(); 537 } 538 539 static void test_retry_flush(const char *machine) 540 { 541 uint8_t data; 542 const char *s; 543 544 prepare_blkdebug_script(debug_path, "flush_to_disk"); 545 546 ide_test_start( 547 "-vnc none " 548 "-drive file=blkdebug:%s:%s,if=ide,cache=writeback,format=raw," 549 "rerror=stop,werror=stop", 550 debug_path, tmp_path); 551 552 /* FLUSH CACHE command on device 0*/ 553 outb(IDE_BASE + reg_device, 0); 554 outb(IDE_BASE + reg_command, CMD_FLUSH_CACHE); 555 556 /* Check status while request is in flight*/ 557 data = inb(IDE_BASE + reg_status); 558 assert_bit_set(data, BSY | DRDY); 559 assert_bit_clear(data, DF | ERR | DRQ); 560 561 qmp_eventwait("STOP"); 562 563 /* Complete the command */ 564 s = "{'execute':'cont' }"; 565 qmp_discard_response(s); 566 567 /* Check registers */ 568 data = inb(IDE_BASE + reg_device); 569 g_assert_cmpint(data & DEV, ==, 0); 570 571 do { 572 data = inb(IDE_BASE + reg_status); 573 } while (data & BSY); 574 575 assert_bit_set(data, DRDY); 576 assert_bit_clear(data, BSY | DF | ERR | DRQ); 577 578 ide_test_quit(); 579 } 580 581 static void test_flush_nodev(void) 582 { 583 ide_test_start(""); 584 585 /* FLUSH CACHE command on device 0*/ 586 outb(IDE_BASE + reg_device, 0); 587 outb(IDE_BASE + reg_command, CMD_FLUSH_CACHE); 588 589 /* Just testing that qemu doesn't crash... */ 590 591 ide_test_quit(); 592 } 593 594 static void test_pci_retry_flush(void) 595 { 596 test_retry_flush("pc"); 597 } 598 599 static void test_isa_retry_flush(void) 600 { 601 test_retry_flush("isapc"); 602 } 603 604 typedef struct Read10CDB { 605 uint8_t opcode; 606 uint8_t flags; 607 uint32_t lba; 608 uint8_t reserved; 609 uint16_t nblocks; 610 uint8_t control; 611 uint16_t padding; 612 } __attribute__((__packed__)) Read10CDB; 613 614 static void send_scsi_cdb_read10(uint64_t lba, int nblocks) 615 { 616 Read10CDB pkt = { .padding = 0 }; 617 int i; 618 619 g_assert_cmpint(lba, <=, UINT32_MAX); 620 g_assert_cmpint(nblocks, <=, UINT16_MAX); 621 g_assert_cmpint(nblocks, >=, 0); 622 623 /* Construct SCSI CDB packet */ 624 pkt.opcode = 0x28; 625 pkt.lba = cpu_to_be32(lba); 626 pkt.nblocks = cpu_to_be16(nblocks); 627 628 /* Send Packet */ 629 for (i = 0; i < sizeof(Read10CDB)/2; i++) { 630 outw(IDE_BASE + reg_data, cpu_to_le16(((uint16_t *)&pkt)[i])); 631 } 632 } 633 634 static void nsleep(int64_t nsecs) 635 { 636 const struct timespec val = { .tv_nsec = nsecs }; 637 nanosleep(&val, NULL); 638 clock_set(nsecs); 639 } 640 641 static uint8_t ide_wait_clear(uint8_t flag) 642 { 643 uint8_t data; 644 time_t st; 645 646 /* Wait with a 5 second timeout */ 647 time(&st); 648 while (true) { 649 data = inb(IDE_BASE + reg_status); 650 if (!(data & flag)) { 651 return data; 652 } 653 if (difftime(time(NULL), st) > 5.0) { 654 break; 655 } 656 nsleep(400); 657 } 658 g_assert_not_reached(); 659 } 660 661 static void ide_wait_intr(int irq) 662 { 663 time_t st; 664 bool intr; 665 666 time(&st); 667 while (true) { 668 intr = get_irq(irq); 669 if (intr) { 670 return; 671 } 672 if (difftime(time(NULL), st) > 5.0) { 673 break; 674 } 675 nsleep(400); 676 } 677 678 g_assert_not_reached(); 679 } 680 681 static void cdrom_pio_impl(int nblocks) 682 { 683 FILE *fh; 684 int patt_blocks = MAX(16, nblocks); 685 size_t patt_len = ATAPI_BLOCK_SIZE * patt_blocks; 686 char *pattern = g_malloc(patt_len); 687 size_t rxsize = ATAPI_BLOCK_SIZE * nblocks; 688 uint16_t *rx = g_malloc0(rxsize); 689 int i, j; 690 uint8_t data; 691 uint16_t limit; 692 693 /* Prepopulate the CDROM with an interesting pattern */ 694 generate_pattern(pattern, patt_len, ATAPI_BLOCK_SIZE); 695 fh = fopen(tmp_path, "w+"); 696 fwrite(pattern, ATAPI_BLOCK_SIZE, patt_blocks, fh); 697 fclose(fh); 698 699 ide_test_start("-drive if=none,file=%s,media=cdrom,format=raw,id=sr0,index=0 " 700 "-device ide-cd,drive=sr0,bus=ide.0", tmp_path); 701 qtest_irq_intercept_in(global_qtest, "ioapic"); 702 703 /* PACKET command on device 0 */ 704 outb(IDE_BASE + reg_device, 0); 705 outb(IDE_BASE + reg_lba_middle, BYTE_COUNT_LIMIT & 0xFF); 706 outb(IDE_BASE + reg_lba_high, (BYTE_COUNT_LIMIT >> 8 & 0xFF)); 707 outb(IDE_BASE + reg_command, CMD_PACKET); 708 /* HP0: Check_Status_A State */ 709 nsleep(400); 710 data = ide_wait_clear(BSY); 711 /* HP1: Send_Packet State */ 712 assert_bit_set(data, DRQ | DRDY); 713 assert_bit_clear(data, ERR | DF | BSY); 714 715 /* SCSI CDB (READ10) -- read n*2048 bytes from block 0 */ 716 send_scsi_cdb_read10(0, nblocks); 717 718 /* Read data back: occurs in bursts of 'BYTE_COUNT_LIMIT' bytes. 719 * If BYTE_COUNT_LIMIT is odd, we transfer BYTE_COUNT_LIMIT - 1 bytes. 720 * We allow an odd limit only when the remaining transfer size is 721 * less than BYTE_COUNT_LIMIT. However, SCSI's read10 command can only 722 * request n blocks, so our request size is always even. 723 * For this reason, we assume there is never a hanging byte to fetch. */ 724 g_assert(!(rxsize & 1)); 725 limit = BYTE_COUNT_LIMIT & ~1; 726 for (i = 0; i < DIV_ROUND_UP(rxsize, limit); i++) { 727 size_t offset = i * (limit / 2); 728 size_t rem = (rxsize / 2) - offset; 729 730 /* HP3: INTRQ_Wait */ 731 ide_wait_intr(IDE_PRIMARY_IRQ); 732 733 /* HP2: Check_Status_B (and clear IRQ) */ 734 data = ide_wait_clear(BSY); 735 assert_bit_set(data, DRQ | DRDY); 736 assert_bit_clear(data, ERR | DF | BSY); 737 738 /* HP4: Transfer_Data */ 739 for (j = 0; j < MIN((limit / 2), rem); j++) { 740 rx[offset + j] = le16_to_cpu(inw(IDE_BASE + reg_data)); 741 } 742 } 743 744 /* Check for final completion IRQ */ 745 ide_wait_intr(IDE_PRIMARY_IRQ); 746 747 /* Sanity check final state */ 748 data = ide_wait_clear(DRQ); 749 assert_bit_set(data, DRDY); 750 assert_bit_clear(data, DRQ | ERR | DF | BSY); 751 752 g_assert_cmpint(memcmp(pattern, rx, rxsize), ==, 0); 753 g_free(pattern); 754 g_free(rx); 755 test_bmdma_teardown(); 756 } 757 758 static void test_cdrom_pio(void) 759 { 760 cdrom_pio_impl(1); 761 } 762 763 static void test_cdrom_pio_large(void) 764 { 765 /* Test a few loops of the PIO DRQ mechanism. */ 766 cdrom_pio_impl(BYTE_COUNT_LIMIT * 4 / ATAPI_BLOCK_SIZE); 767 } 768 769 770 static void test_cdrom_dma(void) 771 { 772 static const size_t len = ATAPI_BLOCK_SIZE; 773 char *pattern = g_malloc(ATAPI_BLOCK_SIZE * 16); 774 char *rx = g_malloc0(len); 775 uintptr_t guest_buf; 776 PrdtEntry prdt[1]; 777 FILE *fh; 778 779 ide_test_start("-drive if=none,file=%s,media=cdrom,format=raw,id=sr0,index=0 " 780 "-device ide-cd,drive=sr0,bus=ide.0", tmp_path); 781 qtest_irq_intercept_in(global_qtest, "ioapic"); 782 783 guest_buf = guest_alloc(guest_malloc, len); 784 prdt[0].addr = cpu_to_le32(guest_buf); 785 prdt[0].size = cpu_to_le32(len | PRDT_EOT); 786 787 generate_pattern(pattern, ATAPI_BLOCK_SIZE * 16, ATAPI_BLOCK_SIZE); 788 fh = fopen(tmp_path, "w+"); 789 fwrite(pattern, ATAPI_BLOCK_SIZE, 16, fh); 790 fclose(fh); 791 792 send_dma_request(CMD_PACKET, 0, 1, prdt, 1, send_scsi_cdb_read10); 793 794 /* Read back data from guest memory into local qtest memory */ 795 memread(guest_buf, rx, len); 796 g_assert_cmpint(memcmp(pattern, rx, len), ==, 0); 797 798 g_free(pattern); 799 g_free(rx); 800 test_bmdma_teardown(); 801 } 802 803 int main(int argc, char **argv) 804 { 805 const char *arch = qtest_get_arch(); 806 int fd; 807 int ret; 808 809 /* Check architecture */ 810 if (strcmp(arch, "i386") && strcmp(arch, "x86_64")) { 811 g_test_message("Skipping test for non-x86\n"); 812 return 0; 813 } 814 815 /* Create temporary blkdebug instructions */ 816 fd = mkstemp(debug_path); 817 g_assert(fd >= 0); 818 close(fd); 819 820 /* Create a temporary raw image */ 821 fd = mkstemp(tmp_path); 822 g_assert(fd >= 0); 823 ret = ftruncate(fd, TEST_IMAGE_SIZE); 824 g_assert(ret == 0); 825 close(fd); 826 827 /* Run the tests */ 828 g_test_init(&argc, &argv, NULL); 829 830 qtest_add_func("/ide/identify", test_identify); 831 832 qtest_add_func("/ide/bmdma/setup", test_bmdma_setup); 833 qtest_add_func("/ide/bmdma/simple_rw", test_bmdma_simple_rw); 834 qtest_add_func("/ide/bmdma/short_prdt", test_bmdma_short_prdt); 835 qtest_add_func("/ide/bmdma/one_sector_short_prdt", 836 test_bmdma_one_sector_short_prdt); 837 qtest_add_func("/ide/bmdma/long_prdt", test_bmdma_long_prdt); 838 qtest_add_func("/ide/bmdma/no_busmaster", test_bmdma_no_busmaster); 839 qtest_add_func("/ide/bmdma/teardown", test_bmdma_teardown); 840 841 qtest_add_func("/ide/flush", test_flush); 842 qtest_add_func("/ide/flush/nodev", test_flush_nodev); 843 qtest_add_func("/ide/flush/retry_pci", test_pci_retry_flush); 844 qtest_add_func("/ide/flush/retry_isa", test_isa_retry_flush); 845 846 qtest_add_func("/ide/cdrom/pio", test_cdrom_pio); 847 qtest_add_func("/ide/cdrom/pio_large", test_cdrom_pio_large); 848 qtest_add_func("/ide/cdrom/dma", test_cdrom_dma); 849 850 ret = g_test_run(); 851 852 /* Cleanup */ 853 unlink(tmp_path); 854 unlink(debug_path); 855 856 return ret; 857 } 858