1 /* 2 * IDE test cases 3 * 4 * Copyright (c) 2013 Kevin Wolf <kwolf@redhat.com> 5 * 6 * Permission is hereby granted, free of charge, to any person obtaining a copy 7 * of this software and associated documentation files (the "Software"), to deal 8 * in the Software without restriction, including without limitation the rights 9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 10 * copies of the Software, and to permit persons to whom the Software is 11 * furnished to do so, subject to the following conditions: 12 * 13 * The above copyright notice and this permission notice shall be included in 14 * all copies or substantial portions of the Software. 15 * 16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 22 * THE SOFTWARE. 23 */ 24 25 #include <stdint.h> 26 #include <string.h> 27 #include <stdio.h> 28 29 #include <glib.h> 30 31 #include "libqtest.h" 32 #include "libqos/libqos.h" 33 #include "libqos/pci-pc.h" 34 #include "libqos/malloc-pc.h" 35 36 #include "qemu-common.h" 37 #include "hw/pci/pci_ids.h" 38 #include "hw/pci/pci_regs.h" 39 40 #define TEST_IMAGE_SIZE 64 * 1024 * 1024 41 42 #define IDE_PCI_DEV 1 43 #define IDE_PCI_FUNC 1 44 45 #define IDE_BASE 0x1f0 46 #define IDE_PRIMARY_IRQ 14 47 48 #define ATAPI_BLOCK_SIZE 2048 49 50 /* How many bytes to receive via ATAPI PIO at one time. 51 * Must be less than 0xFFFF. */ 52 #define BYTE_COUNT_LIMIT 5120 53 54 enum { 55 reg_data = 0x0, 56 reg_feature = 0x1, 57 reg_nsectors = 0x2, 58 reg_lba_low = 0x3, 59 reg_lba_middle = 0x4, 60 reg_lba_high = 0x5, 61 reg_device = 0x6, 62 reg_status = 0x7, 63 reg_command = 0x7, 64 }; 65 66 enum { 67 BSY = 0x80, 68 DRDY = 0x40, 69 DF = 0x20, 70 DRQ = 0x08, 71 ERR = 0x01, 72 }; 73 74 enum { 75 DEV = 0x10, 76 LBA = 0x40, 77 }; 78 79 enum { 80 bmreg_cmd = 0x0, 81 bmreg_status = 0x2, 82 bmreg_prdt = 0x4, 83 }; 84 85 enum { 86 CMD_READ_DMA = 0xc8, 87 CMD_WRITE_DMA = 0xca, 88 CMD_FLUSH_CACHE = 0xe7, 89 CMD_IDENTIFY = 0xec, 90 CMD_PACKET = 0xa0, 91 92 CMDF_ABORT = 0x100, 93 CMDF_NO_BM = 0x200, 94 }; 95 96 enum { 97 BM_CMD_START = 0x1, 98 BM_CMD_WRITE = 0x8, /* write = from device to memory */ 99 }; 100 101 enum { 102 BM_STS_ACTIVE = 0x1, 103 BM_STS_ERROR = 0x2, 104 BM_STS_INTR = 0x4, 105 }; 106 107 enum { 108 PRDT_EOT = 0x80000000, 109 }; 110 111 #define assert_bit_set(data, mask) g_assert_cmphex((data) & (mask), ==, (mask)) 112 #define assert_bit_clear(data, mask) g_assert_cmphex((data) & (mask), ==, 0) 113 114 static QPCIBus *pcibus = NULL; 115 static QGuestAllocator *guest_malloc; 116 117 static char tmp_path[] = "/tmp/qtest.XXXXXX"; 118 static char debug_path[] = "/tmp/qtest-blkdebug.XXXXXX"; 119 120 static void ide_test_start(const char *cmdline_fmt, ...) 121 { 122 va_list ap; 123 char *cmdline; 124 125 va_start(ap, cmdline_fmt); 126 cmdline = g_strdup_vprintf(cmdline_fmt, ap); 127 va_end(ap); 128 129 qtest_start(cmdline); 130 guest_malloc = pc_alloc_init(); 131 132 g_free(cmdline); 133 } 134 135 static void ide_test_quit(void) 136 { 137 pc_alloc_uninit(guest_malloc); 138 guest_malloc = NULL; 139 qtest_end(); 140 } 141 142 static QPCIDevice *get_pci_device(uint16_t *bmdma_base) 143 { 144 QPCIDevice *dev; 145 uint16_t vendor_id, device_id; 146 147 if (!pcibus) { 148 pcibus = qpci_init_pc(); 149 } 150 151 /* Find PCI device and verify it's the right one */ 152 dev = qpci_device_find(pcibus, QPCI_DEVFN(IDE_PCI_DEV, IDE_PCI_FUNC)); 153 g_assert(dev != NULL); 154 155 vendor_id = qpci_config_readw(dev, PCI_VENDOR_ID); 156 device_id = qpci_config_readw(dev, PCI_DEVICE_ID); 157 g_assert(vendor_id == PCI_VENDOR_ID_INTEL); 158 g_assert(device_id == PCI_DEVICE_ID_INTEL_82371SB_1); 159 160 /* Map bmdma BAR */ 161 *bmdma_base = (uint16_t)(uintptr_t) qpci_iomap(dev, 4, NULL); 162 163 qpci_device_enable(dev); 164 165 return dev; 166 } 167 168 static void free_pci_device(QPCIDevice *dev) 169 { 170 /* libqos doesn't have a function for this, so free it manually */ 171 g_free(dev); 172 } 173 174 typedef struct PrdtEntry { 175 uint32_t addr; 176 uint32_t size; 177 } QEMU_PACKED PrdtEntry; 178 179 #define assert_bit_set(data, mask) g_assert_cmphex((data) & (mask), ==, (mask)) 180 #define assert_bit_clear(data, mask) g_assert_cmphex((data) & (mask), ==, 0) 181 182 static int send_dma_request(int cmd, uint64_t sector, int nb_sectors, 183 PrdtEntry *prdt, int prdt_entries, 184 void(*post_exec)(uint64_t sector, int nb_sectors)) 185 { 186 QPCIDevice *dev; 187 uint16_t bmdma_base; 188 uintptr_t guest_prdt; 189 size_t len; 190 bool from_dev; 191 uint8_t status; 192 int flags; 193 194 dev = get_pci_device(&bmdma_base); 195 196 flags = cmd & ~0xff; 197 cmd &= 0xff; 198 199 switch (cmd) { 200 case CMD_READ_DMA: 201 case CMD_PACKET: 202 /* Assuming we only test data reads w/ ATAPI, otherwise we need to know 203 * the SCSI command being sent in the packet, too. */ 204 from_dev = true; 205 break; 206 case CMD_WRITE_DMA: 207 from_dev = false; 208 break; 209 default: 210 g_assert_not_reached(); 211 } 212 213 if (flags & CMDF_NO_BM) { 214 qpci_config_writew(dev, PCI_COMMAND, 215 PCI_COMMAND_IO | PCI_COMMAND_MEMORY); 216 } 217 218 /* Select device 0 */ 219 outb(IDE_BASE + reg_device, 0 | LBA); 220 221 /* Stop any running transfer, clear any pending interrupt */ 222 outb(bmdma_base + bmreg_cmd, 0); 223 outb(bmdma_base + bmreg_status, BM_STS_INTR); 224 225 /* Setup PRDT */ 226 len = sizeof(*prdt) * prdt_entries; 227 guest_prdt = guest_alloc(guest_malloc, len); 228 memwrite(guest_prdt, prdt, len); 229 outl(bmdma_base + bmreg_prdt, guest_prdt); 230 231 /* ATA DMA command */ 232 if (cmd == CMD_PACKET) { 233 /* Enables ATAPI DMA; otherwise PIO is attempted */ 234 outb(IDE_BASE + reg_feature, 0x01); 235 } else { 236 outb(IDE_BASE + reg_nsectors, nb_sectors); 237 outb(IDE_BASE + reg_lba_low, sector & 0xff); 238 outb(IDE_BASE + reg_lba_middle, (sector >> 8) & 0xff); 239 outb(IDE_BASE + reg_lba_high, (sector >> 16) & 0xff); 240 } 241 242 outb(IDE_BASE + reg_command, cmd); 243 244 if (post_exec) { 245 post_exec(sector, nb_sectors); 246 } 247 248 /* Start DMA transfer */ 249 outb(bmdma_base + bmreg_cmd, BM_CMD_START | (from_dev ? BM_CMD_WRITE : 0)); 250 251 if (flags & CMDF_ABORT) { 252 outb(bmdma_base + bmreg_cmd, 0); 253 } 254 255 /* Wait for the DMA transfer to complete */ 256 do { 257 status = inb(bmdma_base + bmreg_status); 258 } while ((status & (BM_STS_ACTIVE | BM_STS_INTR)) == BM_STS_ACTIVE); 259 260 g_assert_cmpint(get_irq(IDE_PRIMARY_IRQ), ==, !!(status & BM_STS_INTR)); 261 262 /* Check IDE status code */ 263 assert_bit_set(inb(IDE_BASE + reg_status), DRDY); 264 assert_bit_clear(inb(IDE_BASE + reg_status), BSY | DRQ); 265 266 /* Reading the status register clears the IRQ */ 267 g_assert(!get_irq(IDE_PRIMARY_IRQ)); 268 269 /* Stop DMA transfer if still active */ 270 if (status & BM_STS_ACTIVE) { 271 outb(bmdma_base + bmreg_cmd, 0); 272 } 273 274 free_pci_device(dev); 275 276 return status; 277 } 278 279 static void test_bmdma_simple_rw(void) 280 { 281 uint8_t status; 282 uint8_t *buf; 283 uint8_t *cmpbuf; 284 size_t len = 512; 285 uintptr_t guest_buf = guest_alloc(guest_malloc, len); 286 287 PrdtEntry prdt[] = { 288 { 289 .addr = cpu_to_le32(guest_buf), 290 .size = cpu_to_le32(len | PRDT_EOT), 291 }, 292 }; 293 294 buf = g_malloc(len); 295 cmpbuf = g_malloc(len); 296 297 /* Write 0x55 pattern to sector 0 */ 298 memset(buf, 0x55, len); 299 memwrite(guest_buf, buf, len); 300 301 status = send_dma_request(CMD_WRITE_DMA, 0, 1, prdt, 302 ARRAY_SIZE(prdt), NULL); 303 g_assert_cmphex(status, ==, BM_STS_INTR); 304 assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR); 305 306 /* Write 0xaa pattern to sector 1 */ 307 memset(buf, 0xaa, len); 308 memwrite(guest_buf, buf, len); 309 310 status = send_dma_request(CMD_WRITE_DMA, 1, 1, prdt, 311 ARRAY_SIZE(prdt), NULL); 312 g_assert_cmphex(status, ==, BM_STS_INTR); 313 assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR); 314 315 /* Read and verify 0x55 pattern in sector 0 */ 316 memset(cmpbuf, 0x55, len); 317 318 status = send_dma_request(CMD_READ_DMA, 0, 1, prdt, ARRAY_SIZE(prdt), NULL); 319 g_assert_cmphex(status, ==, BM_STS_INTR); 320 assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR); 321 322 memread(guest_buf, buf, len); 323 g_assert(memcmp(buf, cmpbuf, len) == 0); 324 325 /* Read and verify 0xaa pattern in sector 1 */ 326 memset(cmpbuf, 0xaa, len); 327 328 status = send_dma_request(CMD_READ_DMA, 1, 1, prdt, ARRAY_SIZE(prdt), NULL); 329 g_assert_cmphex(status, ==, BM_STS_INTR); 330 assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR); 331 332 memread(guest_buf, buf, len); 333 g_assert(memcmp(buf, cmpbuf, len) == 0); 334 335 336 g_free(buf); 337 g_free(cmpbuf); 338 } 339 340 static void test_bmdma_short_prdt(void) 341 { 342 uint8_t status; 343 344 PrdtEntry prdt[] = { 345 { 346 .addr = 0, 347 .size = cpu_to_le32(0x10 | PRDT_EOT), 348 }, 349 }; 350 351 /* Normal request */ 352 status = send_dma_request(CMD_READ_DMA, 0, 1, 353 prdt, ARRAY_SIZE(prdt), NULL); 354 g_assert_cmphex(status, ==, 0); 355 assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR); 356 357 /* Abort the request before it completes */ 358 status = send_dma_request(CMD_READ_DMA | CMDF_ABORT, 0, 1, 359 prdt, ARRAY_SIZE(prdt), NULL); 360 g_assert_cmphex(status, ==, 0); 361 assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR); 362 } 363 364 static void test_bmdma_one_sector_short_prdt(void) 365 { 366 uint8_t status; 367 368 /* Read 2 sectors but only give 1 sector in PRDT */ 369 PrdtEntry prdt[] = { 370 { 371 .addr = 0, 372 .size = cpu_to_le32(0x200 | PRDT_EOT), 373 }, 374 }; 375 376 /* Normal request */ 377 status = send_dma_request(CMD_READ_DMA, 0, 2, 378 prdt, ARRAY_SIZE(prdt), NULL); 379 g_assert_cmphex(status, ==, 0); 380 assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR); 381 382 /* Abort the request before it completes */ 383 status = send_dma_request(CMD_READ_DMA | CMDF_ABORT, 0, 2, 384 prdt, ARRAY_SIZE(prdt), NULL); 385 g_assert_cmphex(status, ==, 0); 386 assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR); 387 } 388 389 static void test_bmdma_long_prdt(void) 390 { 391 uint8_t status; 392 393 PrdtEntry prdt[] = { 394 { 395 .addr = 0, 396 .size = cpu_to_le32(0x1000 | PRDT_EOT), 397 }, 398 }; 399 400 /* Normal request */ 401 status = send_dma_request(CMD_READ_DMA, 0, 1, 402 prdt, ARRAY_SIZE(prdt), NULL); 403 g_assert_cmphex(status, ==, BM_STS_ACTIVE | BM_STS_INTR); 404 assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR); 405 406 /* Abort the request before it completes */ 407 status = send_dma_request(CMD_READ_DMA | CMDF_ABORT, 0, 1, 408 prdt, ARRAY_SIZE(prdt), NULL); 409 g_assert_cmphex(status, ==, BM_STS_INTR); 410 assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR); 411 } 412 413 static void test_bmdma_no_busmaster(void) 414 { 415 uint8_t status; 416 417 /* No PRDT_EOT, each entry addr 0/size 64k, and in theory qemu shouldn't be 418 * able to access it anyway because the Bus Master bit in the PCI command 419 * register isn't set. This is complete nonsense, but it used to be pretty 420 * good at confusing and occasionally crashing qemu. */ 421 PrdtEntry prdt[4096] = { }; 422 423 status = send_dma_request(CMD_READ_DMA | CMDF_NO_BM, 0, 512, 424 prdt, ARRAY_SIZE(prdt), NULL); 425 426 /* Not entirely clear what the expected result is, but this is what we get 427 * in practice. At least we want to be aware of any changes. */ 428 g_assert_cmphex(status, ==, BM_STS_ACTIVE | BM_STS_INTR); 429 assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR); 430 } 431 432 static void test_bmdma_setup(void) 433 { 434 ide_test_start( 435 "-drive file=%s,if=ide,serial=%s,cache=writeback,format=raw " 436 "-global ide-hd.ver=%s", 437 tmp_path, "testdisk", "version"); 438 qtest_irq_intercept_in(global_qtest, "ioapic"); 439 } 440 441 static void test_bmdma_teardown(void) 442 { 443 ide_test_quit(); 444 } 445 446 static void string_cpu_to_be16(uint16_t *s, size_t bytes) 447 { 448 g_assert((bytes & 1) == 0); 449 bytes /= 2; 450 451 while (bytes--) { 452 *s = cpu_to_be16(*s); 453 s++; 454 } 455 } 456 457 static void test_identify(void) 458 { 459 uint8_t data; 460 uint16_t buf[256]; 461 int i; 462 int ret; 463 464 ide_test_start( 465 "-drive file=%s,if=ide,serial=%s,cache=writeback,format=raw " 466 "-global ide-hd.ver=%s", 467 tmp_path, "testdisk", "version"); 468 469 /* IDENTIFY command on device 0*/ 470 outb(IDE_BASE + reg_device, 0); 471 outb(IDE_BASE + reg_command, CMD_IDENTIFY); 472 473 /* Read in the IDENTIFY buffer and check registers */ 474 data = inb(IDE_BASE + reg_device); 475 g_assert_cmpint(data & DEV, ==, 0); 476 477 for (i = 0; i < 256; i++) { 478 data = inb(IDE_BASE + reg_status); 479 assert_bit_set(data, DRDY | DRQ); 480 assert_bit_clear(data, BSY | DF | ERR); 481 482 ((uint16_t*) buf)[i] = inw(IDE_BASE + reg_data); 483 } 484 485 data = inb(IDE_BASE + reg_status); 486 assert_bit_set(data, DRDY); 487 assert_bit_clear(data, BSY | DF | ERR | DRQ); 488 489 /* Check serial number/version in the buffer */ 490 string_cpu_to_be16(&buf[10], 20); 491 ret = memcmp(&buf[10], "testdisk ", 20); 492 g_assert(ret == 0); 493 494 string_cpu_to_be16(&buf[23], 8); 495 ret = memcmp(&buf[23], "version ", 8); 496 g_assert(ret == 0); 497 498 /* Write cache enabled bit */ 499 assert_bit_set(buf[85], 0x20); 500 501 ide_test_quit(); 502 } 503 504 static void test_flush(void) 505 { 506 uint8_t data; 507 508 ide_test_start( 509 "-drive file=blkdebug::%s,if=ide,cache=writeback,format=raw", 510 tmp_path); 511 512 /* Delay the completion of the flush request until we explicitly do it */ 513 qmp_discard_response("{'execute':'human-monitor-command', 'arguments': {" 514 " 'command-line':" 515 " 'qemu-io ide0-hd0 \"break flush_to_os A\"'} }"); 516 517 /* FLUSH CACHE command on device 0*/ 518 outb(IDE_BASE + reg_device, 0); 519 outb(IDE_BASE + reg_command, CMD_FLUSH_CACHE); 520 521 /* Check status while request is in flight*/ 522 data = inb(IDE_BASE + reg_status); 523 assert_bit_set(data, BSY | DRDY); 524 assert_bit_clear(data, DF | ERR | DRQ); 525 526 /* Complete the command */ 527 qmp_discard_response("{'execute':'human-monitor-command', 'arguments': {" 528 " 'command-line':" 529 " 'qemu-io ide0-hd0 \"resume A\"'} }"); 530 531 /* Check registers */ 532 data = inb(IDE_BASE + reg_device); 533 g_assert_cmpint(data & DEV, ==, 0); 534 535 do { 536 data = inb(IDE_BASE + reg_status); 537 } while (data & BSY); 538 539 assert_bit_set(data, DRDY); 540 assert_bit_clear(data, BSY | DF | ERR | DRQ); 541 542 ide_test_quit(); 543 } 544 545 static void test_retry_flush(const char *machine) 546 { 547 uint8_t data; 548 const char *s; 549 550 prepare_blkdebug_script(debug_path, "flush_to_disk"); 551 552 ide_test_start( 553 "-vnc none " 554 "-drive file=blkdebug:%s:%s,if=ide,cache=writeback,format=raw," 555 "rerror=stop,werror=stop", 556 debug_path, tmp_path); 557 558 /* FLUSH CACHE command on device 0*/ 559 outb(IDE_BASE + reg_device, 0); 560 outb(IDE_BASE + reg_command, CMD_FLUSH_CACHE); 561 562 /* Check status while request is in flight*/ 563 data = inb(IDE_BASE + reg_status); 564 assert_bit_set(data, BSY | DRDY); 565 assert_bit_clear(data, DF | ERR | DRQ); 566 567 qmp_eventwait("STOP"); 568 569 /* Complete the command */ 570 s = "{'execute':'cont' }"; 571 qmp_discard_response(s); 572 573 /* Check registers */ 574 data = inb(IDE_BASE + reg_device); 575 g_assert_cmpint(data & DEV, ==, 0); 576 577 do { 578 data = inb(IDE_BASE + reg_status); 579 } while (data & BSY); 580 581 assert_bit_set(data, DRDY); 582 assert_bit_clear(data, BSY | DF | ERR | DRQ); 583 584 ide_test_quit(); 585 } 586 587 static void test_flush_nodev(void) 588 { 589 ide_test_start(""); 590 591 /* FLUSH CACHE command on device 0*/ 592 outb(IDE_BASE + reg_device, 0); 593 outb(IDE_BASE + reg_command, CMD_FLUSH_CACHE); 594 595 /* Just testing that qemu doesn't crash... */ 596 597 ide_test_quit(); 598 } 599 600 static void test_pci_retry_flush(const char *machine) 601 { 602 test_retry_flush("pc"); 603 } 604 605 static void test_isa_retry_flush(const char *machine) 606 { 607 test_retry_flush("isapc"); 608 } 609 610 typedef struct Read10CDB { 611 uint8_t opcode; 612 uint8_t flags; 613 uint32_t lba; 614 uint8_t reserved; 615 uint16_t nblocks; 616 uint8_t control; 617 uint16_t padding; 618 } __attribute__((__packed__)) Read10CDB; 619 620 static void send_scsi_cdb_read10(uint64_t lba, int nblocks) 621 { 622 Read10CDB pkt = { .padding = 0 }; 623 int i; 624 625 g_assert_cmpint(lba, <=, UINT32_MAX); 626 g_assert_cmpint(nblocks, <=, UINT16_MAX); 627 g_assert_cmpint(nblocks, >=, 0); 628 629 /* Construct SCSI CDB packet */ 630 pkt.opcode = 0x28; 631 pkt.lba = cpu_to_be32(lba); 632 pkt.nblocks = cpu_to_be16(nblocks); 633 634 /* Send Packet */ 635 for (i = 0; i < sizeof(Read10CDB)/2; i++) { 636 outw(IDE_BASE + reg_data, ((uint16_t *)&pkt)[i]); 637 } 638 } 639 640 static void nsleep(int64_t nsecs) 641 { 642 const struct timespec val = { .tv_nsec = nsecs }; 643 nanosleep(&val, NULL); 644 clock_set(nsecs); 645 } 646 647 static uint8_t ide_wait_clear(uint8_t flag) 648 { 649 int i; 650 uint8_t data; 651 652 /* Wait with a 5 second timeout */ 653 for (i = 0; i <= 12500000; i++) { 654 data = inb(IDE_BASE + reg_status); 655 if (!(data & flag)) { 656 return data; 657 } 658 nsleep(400); 659 } 660 g_assert_not_reached(); 661 } 662 663 static void ide_wait_intr(int irq) 664 { 665 int i; 666 bool intr; 667 668 for (i = 0; i <= 12500000; i++) { 669 intr = get_irq(irq); 670 if (intr) { 671 return; 672 } 673 nsleep(400); 674 } 675 676 g_assert_not_reached(); 677 } 678 679 static void cdrom_pio_impl(int nblocks) 680 { 681 FILE *fh; 682 int patt_blocks = MAX(16, nblocks); 683 size_t patt_len = ATAPI_BLOCK_SIZE * patt_blocks; 684 char *pattern = g_malloc(patt_len); 685 size_t rxsize = ATAPI_BLOCK_SIZE * nblocks; 686 uint16_t *rx = g_malloc0(rxsize); 687 int i, j; 688 uint8_t data; 689 uint16_t limit; 690 691 /* Prepopulate the CDROM with an interesting pattern */ 692 generate_pattern(pattern, patt_len, ATAPI_BLOCK_SIZE); 693 fh = fopen(tmp_path, "w+"); 694 fwrite(pattern, ATAPI_BLOCK_SIZE, patt_blocks, fh); 695 fclose(fh); 696 697 ide_test_start("-drive if=none,file=%s,media=cdrom,format=raw,id=sr0,index=0 " 698 "-device ide-cd,drive=sr0,bus=ide.0", tmp_path); 699 qtest_irq_intercept_in(global_qtest, "ioapic"); 700 701 /* PACKET command on device 0 */ 702 outb(IDE_BASE + reg_device, 0); 703 outb(IDE_BASE + reg_lba_middle, BYTE_COUNT_LIMIT & 0xFF); 704 outb(IDE_BASE + reg_lba_high, (BYTE_COUNT_LIMIT >> 8 & 0xFF)); 705 outb(IDE_BASE + reg_command, CMD_PACKET); 706 /* HPD0: Check_Status_A State */ 707 nsleep(400); 708 data = ide_wait_clear(BSY); 709 /* HPD1: Send_Packet State */ 710 assert_bit_set(data, DRQ | DRDY); 711 assert_bit_clear(data, ERR | DF | BSY); 712 713 /* SCSI CDB (READ10) -- read n*2048 bytes from block 0 */ 714 send_scsi_cdb_read10(0, nblocks); 715 716 /* HPD3: INTRQ_Wait */ 717 ide_wait_intr(IDE_PRIMARY_IRQ); 718 719 /* HPD2: Check_Status_B */ 720 data = ide_wait_clear(BSY); 721 assert_bit_set(data, DRQ | DRDY); 722 assert_bit_clear(data, ERR | DF | BSY); 723 724 /* Read data back: occurs in bursts of 'BYTE_COUNT_LIMIT' bytes. 725 * If BYTE_COUNT_LIMIT is odd, we transfer BYTE_COUNT_LIMIT - 1 bytes. 726 * We allow an odd limit only when the remaining transfer size is 727 * less than BYTE_COUNT_LIMIT. However, SCSI's read10 command can only 728 * request n blocks, so our request size is always even. 729 * For this reason, we assume there is never a hanging byte to fetch. */ 730 g_assert(!(rxsize & 1)); 731 limit = BYTE_COUNT_LIMIT & ~1; 732 for (i = 0; i < DIV_ROUND_UP(rxsize, limit); i++) { 733 size_t offset = i * (limit / 2); 734 size_t rem = (rxsize / 2) - offset; 735 for (j = 0; j < MIN((limit / 2), rem); j++) { 736 rx[offset + j] = inw(IDE_BASE + reg_data); 737 } 738 ide_wait_intr(IDE_PRIMARY_IRQ); 739 } 740 data = ide_wait_clear(DRQ); 741 assert_bit_set(data, DRDY); 742 assert_bit_clear(data, DRQ | ERR | DF | BSY); 743 744 g_assert_cmpint(memcmp(pattern, rx, rxsize), ==, 0); 745 g_free(pattern); 746 g_free(rx); 747 test_bmdma_teardown(); 748 } 749 750 static void test_cdrom_pio(void) 751 { 752 cdrom_pio_impl(1); 753 } 754 755 static void test_cdrom_pio_large(void) 756 { 757 /* Test a few loops of the PIO DRQ mechanism. */ 758 cdrom_pio_impl(BYTE_COUNT_LIMIT * 4 / ATAPI_BLOCK_SIZE); 759 } 760 761 762 static void test_cdrom_dma(void) 763 { 764 static const size_t len = ATAPI_BLOCK_SIZE; 765 char *pattern = g_malloc(ATAPI_BLOCK_SIZE * 16); 766 char *rx = g_malloc0(len); 767 uintptr_t guest_buf; 768 PrdtEntry prdt[1]; 769 FILE *fh; 770 771 ide_test_start("-drive if=none,file=%s,media=cdrom,format=raw,id=sr0,index=0 " 772 "-device ide-cd,drive=sr0,bus=ide.0", tmp_path); 773 qtest_irq_intercept_in(global_qtest, "ioapic"); 774 775 guest_buf = guest_alloc(guest_malloc, len); 776 prdt[0].addr = cpu_to_le32(guest_buf); 777 prdt[0].size = cpu_to_le32(len | PRDT_EOT); 778 779 generate_pattern(pattern, ATAPI_BLOCK_SIZE * 16, ATAPI_BLOCK_SIZE); 780 fh = fopen(tmp_path, "w+"); 781 fwrite(pattern, ATAPI_BLOCK_SIZE, 16, fh); 782 fclose(fh); 783 784 send_dma_request(CMD_PACKET, 0, 1, prdt, 1, send_scsi_cdb_read10); 785 786 /* Read back data from guest memory into local qtest memory */ 787 memread(guest_buf, rx, len); 788 g_assert_cmpint(memcmp(pattern, rx, len), ==, 0); 789 790 g_free(pattern); 791 g_free(rx); 792 test_bmdma_teardown(); 793 } 794 795 int main(int argc, char **argv) 796 { 797 const char *arch = qtest_get_arch(); 798 int fd; 799 int ret; 800 801 /* Check architecture */ 802 if (strcmp(arch, "i386") && strcmp(arch, "x86_64")) { 803 g_test_message("Skipping test for non-x86\n"); 804 return 0; 805 } 806 807 /* Create temporary blkdebug instructions */ 808 fd = mkstemp(debug_path); 809 g_assert(fd >= 0); 810 close(fd); 811 812 /* Create a temporary raw image */ 813 fd = mkstemp(tmp_path); 814 g_assert(fd >= 0); 815 ret = ftruncate(fd, TEST_IMAGE_SIZE); 816 g_assert(ret == 0); 817 close(fd); 818 819 /* Run the tests */ 820 g_test_init(&argc, &argv, NULL); 821 822 qtest_add_func("/ide/identify", test_identify); 823 824 qtest_add_func("/ide/bmdma/setup", test_bmdma_setup); 825 qtest_add_func("/ide/bmdma/simple_rw", test_bmdma_simple_rw); 826 qtest_add_func("/ide/bmdma/short_prdt", test_bmdma_short_prdt); 827 qtest_add_func("/ide/bmdma/one_sector_short_prdt", 828 test_bmdma_one_sector_short_prdt); 829 qtest_add_func("/ide/bmdma/long_prdt", test_bmdma_long_prdt); 830 qtest_add_func("/ide/bmdma/no_busmaster", test_bmdma_no_busmaster); 831 qtest_add_func("/ide/bmdma/teardown", test_bmdma_teardown); 832 833 qtest_add_func("/ide/flush", test_flush); 834 qtest_add_func("/ide/flush/nodev", test_flush_nodev); 835 qtest_add_func("/ide/flush/retry_pci", test_pci_retry_flush); 836 qtest_add_func("/ide/flush/retry_isa", test_isa_retry_flush); 837 838 qtest_add_func("/ide/cdrom/pio", test_cdrom_pio); 839 qtest_add_func("/ide/cdrom/pio_large", test_cdrom_pio_large); 840 qtest_add_func("/ide/cdrom/dma", test_cdrom_dma); 841 842 ret = g_test_run(); 843 844 /* Cleanup */ 845 unlink(tmp_path); 846 unlink(debug_path); 847 848 return ret; 849 } 850