1 /* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) */ 2 3 /* 4 * This structure provides a vDSO-style clock to VM guests, exposing the 5 * relationship (or lack thereof) between the CPU clock (TSC, timebase, arch 6 * counter, etc.) and real time. It is designed to address the problem of 7 * live migration, which other clock enlightenments do not. 8 * 9 * When a guest is live migrated, this affects the clock in two ways. 10 * 11 * First, even between identical hosts the actual frequency of the underlying 12 * counter will change within the tolerances of its specification (typically 13 * ±50PPM, or 4 seconds a day). This frequency also varies over time on the 14 * same host, but can be tracked by NTP as it generally varies slowly. With 15 * live migration there is a step change in the frequency, with no warning. 16 * 17 * Second, there may be a step change in the value of the counter itself, as 18 * its accuracy is limited by the precision of the NTP synchronization on the 19 * source and destination hosts. 20 * 21 * So any calibration (NTP, PTP, etc.) which the guest has done on the source 22 * host before migration is invalid, and needs to be redone on the new host. 23 * 24 * In its most basic mode, this structure provides only an indication to the 25 * guest that live migration has occurred. This allows the guest to know that 26 * its clock is invalid and take remedial action. For applications that need 27 * reliable accurate timestamps (e.g. distributed databases), the structure 28 * can be mapped all the way to userspace. This allows the application to see 29 * directly for itself that the clock is disrupted and take appropriate 30 * action, even when using a vDSO-style method to get the time instead of a 31 * system call. 32 * 33 * In its more advanced mode. this structure can also be used to expose the 34 * precise relationship of the CPU counter to real time, as calibrated by the 35 * host. This means that userspace applications can have accurate time 36 * immediately after live migration, rather than having to pause operations 37 * and wait for NTP to recover. This mode does, of course, rely on the 38 * counter being reliable and consistent across CPUs. 39 * 40 * Note that this must be true UTC, never with smeared leap seconds. If a 41 * guest wishes to construct a smeared clock, it can do so. Presenting a 42 * smeared clock through this interface would be problematic because it 43 * actually messes with the apparent counter *period*. A linear smearing 44 * of 1 ms per second would effectively tweak the counter period by 1000PPM 45 * at the start/end of the smearing period, while a sinusoidal smear would 46 * basically be impossible to represent. 47 * 48 * This structure is offered with the intent that it be adopted into the 49 * nascent virtio-rtc standard, as a virtio-rtc that does not address the live 50 * migration problem seems a little less than fit for purpose. For that 51 * reason, certain fields use precisely the same numeric definitions as in 52 * the virtio-rtc proposal. The structure can also be exposed through an ACPI 53 * device with the CID "VMCLOCK", modelled on the "VMGENID" device except for 54 * the fact that it uses a real _CRS to convey the address of the structure 55 * (which should be a full page, to allow for mapping directly to userspace). 56 */ 57 58 #ifndef __VMCLOCK_ABI_H__ 59 #define __VMCLOCK_ABI_H__ 60 61 #include "standard-headers/linux/types.h" 62 63 struct vmclock_abi { 64 /* CONSTANT FIELDS */ 65 uint32_t magic; 66 #define VMCLOCK_MAGIC 0x4b4c4356 /* "VCLK" */ 67 uint32_t size; /* Size of region containing this structure */ 68 uint16_t version; /* 1 */ 69 uint8_t counter_id; /* Matches VIRTIO_RTC_COUNTER_xxx except INVALID */ 70 #define VMCLOCK_COUNTER_ARM_VCNT 0 71 #define VMCLOCK_COUNTER_X86_TSC 1 72 #define VMCLOCK_COUNTER_INVALID 0xff 73 uint8_t time_type; /* Matches VIRTIO_RTC_TYPE_xxx */ 74 #define VMCLOCK_TIME_UTC 0 /* Since 1970-01-01 00:00:00z */ 75 #define VMCLOCK_TIME_TAI 1 /* Since 1970-01-01 00:00:00z */ 76 #define VMCLOCK_TIME_MONOTONIC 2 /* Since undefined epoch */ 77 #define VMCLOCK_TIME_INVALID_SMEARED 3 /* Not supported */ 78 #define VMCLOCK_TIME_INVALID_MAYBE_SMEARED 4 /* Not supported */ 79 80 /* NON-CONSTANT FIELDS PROTECTED BY SEQCOUNT LOCK */ 81 uint32_t seq_count; /* Low bit means an update is in progress */ 82 /* 83 * This field changes to another non-repeating value when the CPU 84 * counter is disrupted, for example on live migration. This lets 85 * the guest know that it should discard any calibration it has 86 * performed of the counter against external sources (NTP/PTP/etc.). 87 */ 88 uint64_t disruption_marker; 89 uint64_t flags; 90 /* Indicates that the tai_offset_sec field is valid */ 91 #define VMCLOCK_FLAG_TAI_OFFSET_VALID (1 << 0) 92 /* 93 * Optionally used to notify guests of pending maintenance events. 94 * A guest which provides latency-sensitive services may wish to 95 * remove itself from service if an event is coming up. Two flags 96 * indicate the approximate imminence of the event. 97 */ 98 #define VMCLOCK_FLAG_DISRUPTION_SOON (1 << 1) /* About a day */ 99 #define VMCLOCK_FLAG_DISRUPTION_IMMINENT (1 << 2) /* About an hour */ 100 #define VMCLOCK_FLAG_PERIOD_ESTERROR_VALID (1 << 3) 101 #define VMCLOCK_FLAG_PERIOD_MAXERROR_VALID (1 << 4) 102 #define VMCLOCK_FLAG_TIME_ESTERROR_VALID (1 << 5) 103 #define VMCLOCK_FLAG_TIME_MAXERROR_VALID (1 << 6) 104 /* 105 * If the MONOTONIC flag is set then (other than leap seconds) it is 106 * guaranteed that the time calculated according this structure at 107 * any given moment shall never appear to be later than the time 108 * calculated via the structure at any *later* moment. 109 * 110 * In particular, a timestamp based on a counter reading taken 111 * immediately after setting the low bit of seq_count (and the 112 * associated memory barrier), using the previously-valid time and 113 * period fields, shall never be later than a timestamp based on 114 * a counter reading taken immediately before *clearing* the low 115 * bit again after the update, using the about-to-be-valid fields. 116 */ 117 #define VMCLOCK_FLAG_TIME_MONOTONIC (1 << 7) 118 119 uint8_t pad[2]; 120 uint8_t clock_status; 121 #define VMCLOCK_STATUS_UNKNOWN 0 122 #define VMCLOCK_STATUS_INITIALIZING 1 123 #define VMCLOCK_STATUS_SYNCHRONIZED 2 124 #define VMCLOCK_STATUS_FREERUNNING 3 125 #define VMCLOCK_STATUS_UNRELIABLE 4 126 127 /* 128 * The time exposed through this device is never smeared. This field 129 * corresponds to the 'subtype' field in virtio-rtc, which indicates 130 * the smearing method. However in this case it provides a *hint* to 131 * the guest operating system, such that *if* the guest OS wants to 132 * provide its users with an alternative clock which does not follow 133 * UTC, it may do so in a fashion consistent with the other systems 134 * in the nearby environment. 135 */ 136 uint8_t leap_second_smearing_hint; /* Matches VIRTIO_RTC_SUBTYPE_xxx */ 137 #define VMCLOCK_SMEARING_STRICT 0 138 #define VMCLOCK_SMEARING_NOON_LINEAR 1 139 #define VMCLOCK_SMEARING_UTC_SLS 2 140 uint16_t tai_offset_sec; /* Actually two's complement signed */ 141 uint8_t leap_indicator; 142 /* 143 * This field is based on the VIRTIO_RTC_LEAP_xxx values as defined 144 * in the current draft of virtio-rtc, but since smearing cannot be 145 * used with the shared memory device, some values are not used. 146 * 147 * The _POST_POS and _POST_NEG values allow the guest to perform 148 * its own smearing during the day or so after a leap second when 149 * such smearing may need to continue being applied for a leap 150 * second which is now theoretically "historical". 151 */ 152 #define VMCLOCK_LEAP_NONE 0x00 /* No known nearby leap second */ 153 #define VMCLOCK_LEAP_PRE_POS 0x01 /* Positive leap second at EOM */ 154 #define VMCLOCK_LEAP_PRE_NEG 0x02 /* Negative leap second at EOM */ 155 #define VMCLOCK_LEAP_POS 0x03 /* Set during 23:59:60 second */ 156 #define VMCLOCK_LEAP_POST_POS 0x04 157 #define VMCLOCK_LEAP_POST_NEG 0x05 158 159 /* Bit shift for counter_period_frac_sec and its error rate */ 160 uint8_t counter_period_shift; 161 /* 162 * Paired values of counter and UTC at a given point in time. 163 */ 164 uint64_t counter_value; 165 /* 166 * Counter period, and error margin of same. The unit of these 167 * fields is 1/2^(64 + counter_period_shift) of a second. 168 */ 169 uint64_t counter_period_frac_sec; 170 uint64_t counter_period_esterror_rate_frac_sec; 171 uint64_t counter_period_maxerror_rate_frac_sec; 172 173 /* 174 * Time according to time_type field above. 175 */ 176 uint64_t time_sec; /* Seconds since time_type epoch */ 177 uint64_t time_frac_sec; /* Units of 1/2^64 of a second */ 178 uint64_t time_esterror_nanosec; 179 uint64_t time_maxerror_nanosec; 180 }; 181 182 #endif /* __VMCLOCK_ABI_H__ */ 183