xref: /qemu/hw/isa/piix.c (revision 05c049f12b88370de7289bf39b14088c7d656caa)

/*
 * QEMU PIIX PCI ISA Bridge Emulation
 *
 * Copyright (c) 2006 Fabrice Bellard
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 */

#include "qemu/osdep.h"
#include "qemu/range.h"
#include "qapi/error.h"
#include "hw/dma/i8257.h"
#include "hw/southbridge/piix.h"
#include "hw/irq.h"
#include "hw/isa/isa.h"
#include "hw/xen/xen.h"
#include "sysemu/xen.h"
#include "sysemu/reset.h"
#include "sysemu/runstate.h"
#include "migration/vmstate.h"
#include "hw/acpi/acpi_aml_interface.h"

#define XEN_PIIX_NUM_PIRQS      128ULL

static void piix3_set_irq_pic(PIIX3State *piix3, int pic_irq)
{
    qemu_set_irq(piix3->pic[pic_irq],
                 !!(piix3->pic_levels &
                    (((1ULL << PIIX_NUM_PIRQS) - 1) <<
                     (pic_irq * PIIX_NUM_PIRQS))));
}

static void piix3_set_irq_level_internal(PIIX3State *piix3, int pirq, int level)
{
    int pic_irq;
    uint64_t mask;

    pic_irq = piix3->dev.config[PIIX_PIRQCA + pirq];
    if (pic_irq >= PIIX_NUM_PIC_IRQS) {
        return;
    }

    mask = 1ULL << ((pic_irq * PIIX_NUM_PIRQS) + pirq);
    piix3->pic_levels &= ~mask;
    piix3->pic_levels |= mask * !!level;
}

static void piix3_set_irq_level(PIIX3State *piix3, int pirq, int level)
{
    int pic_irq;

    pic_irq = piix3->dev.config[PIIX_PIRQCA + pirq];
    if (pic_irq >= PIIX_NUM_PIC_IRQS) {
        return;
    }

    piix3_set_irq_level_internal(piix3, pirq, level);

    piix3_set_irq_pic(piix3, pic_irq);
}

static void piix3_set_irq(void *opaque, int pirq, int level)
{
    PIIX3State *piix3 = opaque;
    piix3_set_irq_level(piix3, pirq, level);
}

/*
 * Return the global irq number corresponding to a given device irq
 * pin. We could also use the bus number to have a more precise mapping.
 */
static int pci_slot_get_pirq(PCIDevice *pci_dev, int pci_intx)
{
    int slot_addend;
    slot_addend = PCI_SLOT(pci_dev->devfn) - 1;
    return (pci_intx + slot_addend) & 3;
}

static PCIINTxRoute piix3_route_intx_pin_to_irq(void *opaque, int pin)
{
    PIIX3State *piix3 = opaque;
    int irq = piix3->dev.config[PIIX_PIRQCA + pin];
    PCIINTxRoute route;

    if (irq < PIIX_NUM_PIC_IRQS) {
        route.mode = PCI_INTX_ENABLED;
        route.irq = irq;
    } else {
        route.mode = PCI_INTX_DISABLED;
        route.irq = -1;
    }
    return route;
}

/* irq routing is changed. so rebuild bitmap */
static void piix3_update_irq_levels(PIIX3State *piix3)
{
    PCIBus *bus = pci_get_bus(&piix3->dev);
    int pirq;

    piix3->pic_levels = 0;
    for (pirq = 0; pirq < PIIX_NUM_PIRQS; pirq++) {
        piix3_set_irq_level(piix3, pirq, pci_bus_get_irq_level(bus, pirq));
    }
}

static void piix3_write_config(PCIDevice *dev,
                               uint32_t address, uint32_t val, int len)
{
    pci_default_write_config(dev, address, val, len);
    if (ranges_overlap(address, len, PIIX_PIRQCA, 4)) {
        PIIX3State *piix3 = PIIX3_PCI_DEVICE(dev);
        int pic_irq;

        pci_bus_fire_intx_routing_notifier(pci_get_bus(&piix3->dev));
        piix3_update_irq_levels(piix3);
        for (pic_irq = 0; pic_irq < PIIX_NUM_PIC_IRQS; pic_irq++) {
            piix3_set_irq_pic(piix3, pic_irq);
        }
    }
}

static void piix3_write_config_xen(PCIDevice *dev,
                                   uint32_t address, uint32_t val, int len)
{
    int i;

    /* Scan for updates to PCI link routes (0x60-0x63). */
    for (i = 0; i < len; i++) {
        uint8_t v = (val >> (8 * i)) & 0xff;
        if (v & 0x80) {
            v = 0;
        }
        v &= 0xf;
        if (((address + i) >= PIIX_PIRQCA) && ((address + i) <= PIIX_PIRQCD)) {
            xen_set_pci_link_route(address + i - PIIX_PIRQCA, v);
        }
    }

    piix3_write_config(dev, address, val, len);
}

static void piix3_reset(void *opaque)
{
    PIIX3State *d = opaque;
    uint8_t *pci_conf = d->dev.config;

    pci_conf[0x04] = 0x07; /* master, memory and I/O */
    pci_conf[0x05] = 0x00;
    pci_conf[0x06] = 0x00;
    pci_conf[0x07] = 0x02; /* PCI_status_devsel_medium */
    pci_conf[0x4c] = 0x4d;
    pci_conf[0x4e] = 0x03;
    pci_conf[0x4f] = 0x00;
    pci_conf[0x60] = 0x80;
    pci_conf[0x61] = 0x80;
    pci_conf[0x62] = 0x80;
    pci_conf[0x63] = 0x80;
    pci_conf[0x69] = 0x02;
    pci_conf[0x70] = 0x80;
    pci_conf[0x76] = 0x0c;
    pci_conf[0x77] = 0x0c;
    pci_conf[0x78] = 0x02;
    pci_conf[0x79] = 0x00;
    pci_conf[0x80] = 0x00;
    pci_conf[0x82] = 0x00;
    pci_conf[0xa0] = 0x08;
    pci_conf[0xa2] = 0x00;
    pci_conf[0xa3] = 0x00;
    pci_conf[0xa4] = 0x00;
    pci_conf[0xa5] = 0x00;
    pci_conf[0xa6] = 0x00;
    pci_conf[0xa7] = 0x00;
    pci_conf[0xa8] = 0x0f;
    pci_conf[0xaa] = 0x00;
    pci_conf[0xab] = 0x00;
    pci_conf[0xac] = 0x00;
    pci_conf[0xae] = 0x00;

    d->pic_levels = 0;
    d->rcr = 0;
}

static int piix3_post_load(void *opaque, int version_id)
{
    PIIX3State *piix3 = opaque;
    int pirq;

    /*
     * Because the i8259 has not been deserialized yet, qemu_irq_raise
     * might bring the system to a different state than the saved one;
     * for example, the interrupt could be masked but the i8259 would
     * not know that yet and would trigger an interrupt in the CPU.
     *
     * Here, we update irq levels without raising the interrupt.
     * Interrupt state will be deserialized separately through the i8259.
     */
    piix3->pic_levels = 0;
    for (pirq = 0; pirq < PIIX_NUM_PIRQS; pirq++) {
        piix3_set_irq_level_internal(piix3, pirq,
            pci_bus_get_irq_level(pci_get_bus(&piix3->dev), pirq));
    }
    return 0;
}

static int piix3_pre_save(void *opaque)
{
    int i;
    PIIX3State *piix3 = opaque;

    for (i = 0; i < ARRAY_SIZE(piix3->pci_irq_levels_vmstate); i++) {
        piix3->pci_irq_levels_vmstate[i] =
            pci_bus_get_irq_level(pci_get_bus(&piix3->dev), i);
    }

    return 0;
}

static bool piix3_rcr_needed(void *opaque)
{
    PIIX3State *piix3 = opaque;

    return (piix3->rcr != 0);
}

static const VMStateDescription vmstate_piix3_rcr = {
    .name = "PIIX3/rcr",
    .version_id = 1,
    .minimum_version_id = 1,
    .needed = piix3_rcr_needed,
    .fields = (VMStateField[]) {
        VMSTATE_UINT8(rcr, PIIX3State),
        VMSTATE_END_OF_LIST()
    }
};

static const VMStateDescription vmstate_piix3 = {
    .name = "PIIX3",
    .version_id = 3,
    .minimum_version_id = 2,
    .post_load = piix3_post_load,
    .pre_save = piix3_pre_save,
    .fields = (VMStateField[]) {
        VMSTATE_PCI_DEVICE(dev, PIIX3State),
        VMSTATE_INT32_ARRAY_V(pci_irq_levels_vmstate, PIIX3State,
                              PIIX_NUM_PIRQS, 3),
        VMSTATE_END_OF_LIST()
    },
    .subsections = (const VMStateDescription*[]) {
        &vmstate_piix3_rcr,
        NULL
    }
};


static void rcr_write(void *opaque, hwaddr addr, uint64_t val, unsigned len)
{
    PIIX3State *d = opaque;

    if (val & 4) {
        qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
        return;
    }
    d->rcr = val & 2; /* keep System Reset type only */
}

static uint64_t rcr_read(void *opaque, hwaddr addr, unsigned len)
{
    PIIX3State *d = opaque;

    return d->rcr;
}

static const MemoryRegionOps rcr_ops = {
    .read = rcr_read,
    .write = rcr_write,
    .endianness = DEVICE_LITTLE_ENDIAN
};

static void pci_piix3_realize(PCIDevice *dev, Error **errp)
{
    PIIX3State *d = PIIX3_PCI_DEVICE(dev);
    ISABus *isa_bus;

    isa_bus = isa_bus_new(DEVICE(d), get_system_memory(),
                          pci_address_space_io(dev), errp);
    if (!isa_bus) {
        return;
    }

    memory_region_init_io(&d->rcr_mem, OBJECT(dev), &rcr_ops, d,
                          "piix3-reset-control", 1);
    memory_region_add_subregion_overlap(pci_address_space_io(dev),
                                        PIIX_RCR_IOPORT, &d->rcr_mem, 1);

    qemu_register_reset(piix3_reset, d);

    i8257_dma_init(isa_bus, 0);
}

static void build_pci_isa_aml(AcpiDevAmlIf *adev, Aml *scope)
{
    BusChild *kid;
    BusState *bus = qdev_get_child_bus(DEVICE(adev), "isa.0");

    /* PIIX PCI to ISA irq remapping */
    aml_append(scope, aml_operation_region("P40C", AML_PCI_CONFIG,
                                         aml_int(0x60), 0x04));
    QTAILQ_FOREACH(kid, &bus->children, sibling) {
        call_dev_aml_func(DEVICE(kid->child), scope);
    }
}

static void pci_piix3_class_init(ObjectClass *klass, void *data)
{
    DeviceClass *dc = DEVICE_CLASS(klass);
    PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
    AcpiDevAmlIfClass *adevc = ACPI_DEV_AML_IF_CLASS(klass);

    dc->desc        = "ISA bridge";
    dc->vmsd        = &vmstate_piix3;
    dc->hotpluggable   = false;
    k->vendor_id    = PCI_VENDOR_ID_INTEL;
    /* 82371SB PIIX3 PCI-to-ISA bridge (Step A1) */
    k->device_id    = PCI_DEVICE_ID_INTEL_82371SB_0;
    k->class_id     = PCI_CLASS_BRIDGE_ISA;
    /*
     * Reason: part of PIIX3 southbridge, needs to be wired up by
     * pc_piix.c's pc_init1()
     */
    dc->user_creatable = false;
    adevc->build_dev_aml = build_pci_isa_aml;
}

static const TypeInfo piix3_pci_type_info = {
    .name = TYPE_PIIX3_PCI_DEVICE,
    .parent = TYPE_PCI_DEVICE,
    .instance_size = sizeof(PIIX3State),
    .abstract = true,
    .class_init = pci_piix3_class_init,
    .interfaces = (InterfaceInfo[]) {
        { INTERFACE_CONVENTIONAL_PCI_DEVICE },
        { TYPE_ACPI_DEV_AML_IF },
        { },
    },
};

static void piix3_realize(PCIDevice *dev, Error **errp)
{
    ERRP_GUARD();
    PIIX3State *piix3 = PIIX3_PCI_DEVICE(dev);
    PCIBus *pci_bus = pci_get_bus(dev);

    pci_piix3_realize(dev, errp);
    if (*errp) {
        return;
    }

    pci_bus_irqs(pci_bus, piix3_set_irq, pci_slot_get_pirq,
                 piix3, PIIX_NUM_PIRQS);
    pci_bus_set_route_irq_fn(pci_bus, piix3_route_intx_pin_to_irq);
}

static void piix3_class_init(ObjectClass *klass, void *data)
{
    PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);

    k->config_write = piix3_write_config;
    k->realize = piix3_realize;
}

static const TypeInfo piix3_info = {
    .name          = TYPE_PIIX3_DEVICE,
    .parent        = TYPE_PIIX3_PCI_DEVICE,
    .class_init    = piix3_class_init,
};

static void piix3_xen_realize(PCIDevice *dev, Error **errp)
{
    ERRP_GUARD();
    PIIX3State *piix3 = PIIX3_PCI_DEVICE(dev);
    PCIBus *pci_bus = pci_get_bus(dev);

    pci_piix3_realize(dev, errp);
    if (*errp) {
        return;
    }

    /*
     * Xen supports additional interrupt routes from the PCI devices to
     * the IOAPIC: the four pins of each PCI device on the bus are also
     * connected to the IOAPIC directly.
     * These additional routes can be discovered through ACPI.
     */
    pci_bus_irqs(pci_bus, xen_piix3_set_irq, xen_pci_slot_get_pirq,
                 piix3, XEN_PIIX_NUM_PIRQS);
}

static void piix3_xen_class_init(ObjectClass *klass, void *data)
{
    PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);

    k->config_write = piix3_write_config_xen;
    k->realize = piix3_xen_realize;
}

static const TypeInfo piix3_xen_info = {
    .name          = TYPE_PIIX3_XEN_DEVICE,
    .parent        = TYPE_PIIX3_PCI_DEVICE,
    .class_init    = piix3_xen_class_init,
};

static void piix3_register_types(void)
{
    type_register_static(&piix3_pci_type_info);
    type_register_static(&piix3_info);
    type_register_static(&piix3_xen_info);
}

type_init(piix3_register_types)