xref: /linux/Documentation/devicetree/bindings/pci/qcom,pcie-sm8150.yaml (revision e78f70bad29c5ae1e1076698b690b15794e9b81e) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/pci/qcom,pcie-sm8150.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Qualcomm SM8150 PCI Express Root Complex
8
9maintainers:
10  - Bjorn Andersson <andersson@kernel.org>
11  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
12
13description:
14  Qualcomm SM8150 SoC PCIe root complex controller is based on the Synopsys
15  DesignWare PCIe IP.
16
17properties:
18  compatible:
19    const: qcom,pcie-sm8150
20
21  reg:
22    minItems: 5
23    maxItems: 6
24
25  reg-names:
26    minItems: 5
27    items:
28      - const: parf # Qualcomm specific registers
29      - const: dbi # DesignWare PCIe registers
30      - const: elbi # External local bus interface registers
31      - const: atu # ATU address space
32      - const: config # PCIe configuration space
33      - const: mhi # MHI registers
34
35  clocks:
36    minItems: 8
37    maxItems: 8
38
39  clock-names:
40    items:
41      - const: pipe # PIPE clock
42      - const: aux # Auxiliary clock
43      - const: cfg # Configuration clock
44      - const: bus_master # Master AXI clock
45      - const: bus_slave # Slave AXI clock
46      - const: slave_q2a # Slave Q2A clock
47      - const: tbu # PCIe TBU clock
48      - const: ref # REFERENCE clock
49
50  interrupts:
51    minItems: 8
52    maxItems: 9
53
54  interrupt-names:
55    minItems: 8
56    items:
57      - const: msi0
58      - const: msi1
59      - const: msi2
60      - const: msi3
61      - const: msi4
62      - const: msi5
63      - const: msi6
64      - const: msi7
65      - const: global
66
67  resets:
68    maxItems: 1
69
70  reset-names:
71    items:
72      - const: pci
73
74allOf:
75  - $ref: qcom,pcie-common.yaml#
76
77unevaluatedProperties: false
78
79examples:
80  - |
81    #include <dt-bindings/clock/qcom,gcc-sm8150.h>
82    #include <dt-bindings/clock/qcom,rpmh.h>
83    #include <dt-bindings/gpio/gpio.h>
84    #include <dt-bindings/interconnect/qcom,sm8150.h>
85    #include <dt-bindings/interrupt-controller/arm-gic.h>
86
87    soc {
88        #address-cells = <2>;
89        #size-cells = <2>;
90        pcie@1c00000 {
91            compatible = "qcom,pcie-sm8150";
92            reg = <0 0x01c00000 0 0x3000>,
93                  <0 0x60000000 0 0xf1d>,
94                  <0 0x60000f20 0 0xa8>,
95                  <0 0x60001000 0 0x1000>,
96                  <0 0x60100000 0 0x100000>;
97            reg-names = "parf", "dbi", "elbi", "atu", "config";
98            ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
99                     <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
100
101            bus-range = <0x00 0xff>;
102            device_type = "pci";
103            linux,pci-domain = <0>;
104            num-lanes = <1>;
105
106            #address-cells = <3>;
107            #size-cells = <2>;
108
109            clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
110                     <&gcc GCC_PCIE_0_AUX_CLK>,
111                     <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
112                     <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
113                     <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
114                     <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
115                     <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
116                     <&rpmhcc RPMH_CXO_CLK>;
117            clock-names = "pipe",
118                          "aux",
119                          "cfg",
120                          "bus_master",
121                          "bus_slave",
122                          "slave_q2a",
123                          "tbu",
124                          "ref";
125
126            interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
127                         <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
128                         <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
129                         <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
130                         <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
131                         <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
132                         <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
133                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
134                         <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
135            interrupt-names = "msi0", "msi1", "msi2", "msi3",
136                              "msi4", "msi5", "msi6", "msi7", "global";
137            #interrupt-cells = <1>;
138            interrupt-map-mask = <0 0 0 0x7>;
139            interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
140                            <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
141                            <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
142                            <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
143
144            iommu-map = <0x0 &apps_smmu 0x1d80 0x1>,
145                        <0x100 &apps_smmu 0x1d81 0x1>;
146
147            phys = <&pcie0_phy>;
148            phy-names = "pciephy";
149
150            pinctrl-0 = <&pcie0_default_state>;
151            pinctrl-names = "default";
152
153            power-domains = <&gcc PCIE_0_GDSC>;
154
155            resets = <&gcc GCC_PCIE_0_BCR>;
156            reset-names = "pci";
157
158            perst-gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
159            wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
160        };
161    };
162