| /linux/Documentation/gpu/nova/core/ |
| H A D | falcon.rst | 28 Falcons can run in Non-secure (NS), Light Secure (LS), or Heavy Secure (HS)
31 Heavy Secured (HS) also known as Privilege Level 3 (PL3)
33 HS ucode is the most trusted code and has access to pretty much everything on
34 the chip. The HS binary includes a signature in it which is verified at boot.
37 GSP in HS mode. FRTS, which involves setting up and loading content into the WPR
38 (Write Protect Region), has to be done by the HS ucode and cannot be done by the
43 These modes are less secure than HS. Like HS, the LS or NS ucode binary also
45 Falcon, another Falcon needs to be running in HS mode, which also establishes the
47 ucode in HS mode on the SEC2 Falcon, which then authenticates and runs the
61 BROM and DMA registers to trigger the Falcon to load the HS ucode from the system
[all …]
|
| /linux/arch/sparc/kernel/ |
| H A D | viohs.c | 60 viodbg(HS, "SEND VERSION INFO maj[%u] min[%u] devclass[%u]\n", in send_version()
70 viodbg(HS, "START HANDSHAKE\n"); in start_handshake()
144 viodbg(HS, "HANDSHAKE FAILURE\n"); in handshake_failure()
165 viodbg(HS, "UNKNOWN CONTROL [%02x:%02x:%04x:%08x]\n", in process_unknown()
201 viodbg(HS, "SEND DRING_REG INFO ndesc[%u] dsz[%u] opt[0x%x] " in send_dreg()
209 viodbg(HS, "DRING COOKIE(%d) [%016llx:%016llx]\n", in send_dreg()
226 viodbg(HS, "SEND RDX INFO\n"); in send_rdx()
261 viodbg(HS, "GOT VERSION INFO maj[%u] min[%u] devclass[%u]\n", in process_ver_info()
278 viodbg(HS, "SEND VERSION NACK maj[0] min[0]\n"); in process_ver_info()
284 viodbg(HS, "SEND VERSION NACK maj[%u] min[%u]\n", in process_ver_info()
[all …]
|
| H A D | ldc.c | 375 ldcdbg(HS, "SEND VER INFO maj[%u] min[%u]\n", in start_handshake()
402 ldcdbg(HS, "SEND VER NACK maj[%u] min[%u]\n", in send_version_nack()
419 ldcdbg(HS, "SEND VER ACK maj[%u] min[%u]\n", in send_version_ack()
439 ldcdbg(HS, "SEND RTS env[0x%x] seqid[0x%x]\n", in send_rts()
458 ldcdbg(HS, "SEND RTR env[0x%x] seqid[0x%x]\n", in send_rtr()
478 ldcdbg(HS, "SEND RDX env[0x%x] seqid[0x%x] ackid[0x%x]\n", in send_rdx()
502 ldcdbg(HS, "SEND DATA NACK type[0x%x] ctl[0x%x] seq[0x%x] ack[0x%x]\n", in send_data_nack()
578 ldcdbg(HS, "GOT VERSION INFO major[%x] minor[%x]\n", in process_ver_info()
609 ldcdbg(HS, "GOT VERSION ACK major[%x] minor[%x]\n", in process_ver_ack()
672 ldcdbg(HS, "GOT RTS stype[%x] seqid[%x] env[%x]\n", in process_rts()
[all …]
|
| /linux/drivers/net/can/usb/ |
| H A D | Kconfig | 76 - Kvaser Leaf Professional HS
77 - Kvaser Leaf SemiPro HS
83 - Kvaser Memorator II HS/HS
84 - Kvaser USBcan Professional HS/HS
86 - Kvaser Leaf Professional HS (OBD-II connector)
87 - Kvaser Memorator Professional HS/LS
94 - Kvaser Mini PCI Express HS
98 - Kvaser USBcan II HS/HS
99 - Kvaser USBcan II HS/LS
101 - Kvaser Memorator HS/HS
[all …]
|
| /linux/drivers/phy/st/ |
| H A D | Kconfig | 48 tristate "STMicroelectronics STM32 USB HS PHY Controller driver"
58 used by an HS USB Host controller, and the second one is shared
59 between an HS USB OTG controller and an HS USB Host controller,
|
| /linux/arch/arm64/boot/dts/mediatek/ |
| H A D | mt6797-x20-dev.dts | 39 /* HS - I2C2 */
46 /* HS - I2C3 */
|
| /linux/arch/arm/mach-omap2/ |
| H A D | sleep44xx.S | 72 cmp r9, #0x1 @ Check for HS device
106 cmp r9, #0x1 @ Check for HS device
209 cmp r9, #0x1 @ Check for HS device
292 cmp r1, #0x1 @ Check for HS device
|
| H A D | Kconfig | 191 bool "OMAP3 HS/EMU save and restore for L2 AUX control register"
195 lost during off-mode entry on HS/EMU devices. This feature
196 requires support from PPA / boot-loader in HS/EMU devices, which
|
| /linux/arch/arm/boot/dts/intel/socfpga/ |
| H A D | socfpga_cyclone5_chameleon96.dts | 90 label = "HS-I2C2";
102 label = "HS-SPI1";
|
| /linux/arch/arm/boot/dts/ti/omap/ |
| H A D | omap3-cm-t3x.dtsi | 24 /* HS USB Port 1 Power */
33 /* HS USB Port 2 Power */
42 /* HS USB Host PHY on PORT 1 */
49 /* HS USB Host PHY on PORT 2 */
|
| H A D | omap3-beagle-xm-ab.dts | 9 /* HS USB Port 2 Power enable was inverted with the xM C */
|
| H A D | omap3-evm-common.dtsi | 16 /* HS USB Port 2 Power */
27 /* HS USB Host PHY on PORT 2 */
|
| /linux/drivers/phy/qualcomm/ |
| H A D | Kconfig | 138 tristate "Qualcomm M31 HS PHY driver support"
142 Enable this to support M31 HS PHY transceivers on Qualcomm chips
172 tristate "Qualcomm USB HS PHY module"
181 tristate "Qualcomm SNPS FEMTO USB HS PHY V2 module"
225 both HS and SS PHY controllers.
|
| /linux/Documentation/ABI/testing/ |
| H A D | configfs-usb-gadget-uac2 | 11 c_hs_bint capture bInterval for HS/SS (1-4: fixed, 0: auto)
26 p_hs_bint playback bInterval for HS/SS (1-4: fixed, 0: auto)
|
| /linux/Documentation/arch/arc/ |
| H A D | arc.rst | 26 Manual, AKA PRM for ARC HS processors
27 <https://www.synopsys.com/dw/doc.php/ds/cc/programmers-reference-manual-ARC-HS.pdf>`_)
45 Configuration for ARC Linux" in the ARC HS Databook for configurability
|
| /linux/arch/arm64/boot/dts/freescale/ |
| H A D | imx8mp-dhcom-picoitx.dts | 100 /* No HS connector on this SoM variant, so no HDMI, PCIe and only USB HS. */
|
| /linux/Documentation/devicetree/bindings/arc/ |
| H A D | hsdk.txt | 1 Synopsys DesignWare ARC HS Development Kit Device Tree Bindings
|
| /linux/arch/arc/plat-hsdk/ |
| H A D | Kconfig | 6 bool "ARC HS Development Kit SOC"
|
| /linux/Documentation/devicetree/bindings/mfd/ |
| H A D | omap-usb-host.txt | 1 OMAP HS USB Host
66 The OMAP HS USB Host subsystem contains EHCI and OHCI controllers.
|
| H A D | omap-usb-tll.txt | 1 OMAP HS USB Host TLL (Transceiver-Less Interface)
|
| /linux/arch/arm/boot/dts/st/ |
| H A D | stih410-b2260.dts | 132 label = "HS-I2C2";
139 label = "HS-I2C3";
|
| /linux/arch/arm/boot/dts/nxp/imx/ |
| H A D | imx6dl-dhcom-picoitx.dts | 6 * DHCM-iMX6DL-C080-R102-F0819-E-SD-RTC-T-HS-I-01D2
|
| H A D | imx6dl-dhcom-pdk2.dts | 6 * DHCM-iMX6DL-C080-R102-F0819-E-SD-RTC-T-HS-I-01D2
|
| H A D | imx6q-dhcom-pdk2.dts | 7 * DHCM-iMX6Q-C080-R102-F0819-E-SD-RTC-T-HS-I-01D2
|
| /linux/arch/arm/boot/dts/microchip/ |
| H A D | at91-kizbox3-hs.dts | 3 * at91-kizbox3-hs.dts - Device Tree file for Overkiz KIZBOX3-HS board
15 model = "Overkiz KIZBOX3-HS";
|