1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Driver for the Yamaha YAS magnetic sensors, often used in Samsung
4 * mobile phones. While all are not yet handled because of lacking
5 * hardware, expand this driver to handle the different variants:
6 *
7 * YAS530 MS-3E (2011 Samsung Galaxy S Advance)
8 * YAS532 MS-3R (2011 Samsung Galaxy S4)
9 * YAS533 MS-3F (Vivo 1633, 1707, V3, Y21L)
10 * (YAS534 is a magnetic switch, not handled)
11 * YAS535 MS-6C
12 * YAS536 MS-3W
13 * YAS537 MS-3T (2015 Samsung Galaxy S6, Note 5, Galaxy S7)
14 * YAS539 MS-3S (2018 Samsung Galaxy A7 SM-A750FN)
15 *
16 * Code functions found in the MPU3050 YAS530 and YAS532 drivers
17 * named "inv_compass" in the Tegra Android kernel tree.
18 * Copyright (C) 2012 InvenSense Corporation
19 *
20 * Code functions for YAS537 based on Yamaha Android kernel driver.
21 * Copyright (c) 2014 Yamaha Corporation
22 *
23 * Author: Linus Walleij <linus.walleij@linaro.org>
24 */
25 #include <linux/bitfield.h>
26 #include <linux/bitops.h>
27 #include <linux/delay.h>
28 #include <linux/err.h>
29 #include <linux/gpio/consumer.h>
30 #include <linux/i2c.h>
31 #include <linux/module.h>
32 #include <linux/mod_devicetable.h>
33 #include <linux/mutex.h>
34 #include <linux/pm_runtime.h>
35 #include <linux/property.h>
36 #include <linux/regmap.h>
37 #include <linux/regulator/consumer.h>
38 #include <linux/random.h>
39 #include <linux/units.h>
40
41 #include <linux/iio/buffer.h>
42 #include <linux/iio/iio.h>
43 #include <linux/iio/trigger_consumer.h>
44 #include <linux/iio/triggered_buffer.h>
45
46 #include <linux/unaligned.h>
47
48 /* Commonly used registers */
49 #define YAS5XX_DEVICE_ID 0x80
50 #define YAS5XX_MEASURE_DATA 0xB0
51
52 /* These registers are used by YAS530, YAS532 and YAS533 */
53 #define YAS530_ACTUATE_INIT_COIL 0x81
54 #define YAS530_MEASURE 0x82
55 #define YAS530_CONFIG 0x83
56 #define YAS530_MEASURE_INTERVAL 0x84
57 #define YAS530_OFFSET_X 0x85 /* [-31 .. 31] */
58 #define YAS530_OFFSET_Y1 0x86 /* [-31 .. 31] */
59 #define YAS530_OFFSET_Y2 0x87 /* [-31 .. 31] */
60 #define YAS530_TEST1 0x88
61 #define YAS530_TEST2 0x89
62 #define YAS530_CAL 0x90
63
64 /* Registers used by YAS537 */
65 #define YAS537_MEASURE 0x81 /* Originally YAS537_REG_CMDR */
66 #define YAS537_CONFIG 0x82 /* Originally YAS537_REG_CONFR */
67 #define YAS537_MEASURE_INTERVAL 0x83 /* Originally YAS537_REG_INTRVLR */
68 #define YAS537_OFFSET_X 0x84 /* Originally YAS537_REG_OXR */
69 #define YAS537_OFFSET_Y1 0x85 /* Originally YAS537_REG_OY1R */
70 #define YAS537_OFFSET_Y2 0x86 /* Originally YAS537_REG_OY2R */
71 #define YAS537_AVR 0x87
72 #define YAS537_HCK 0x88
73 #define YAS537_LCK 0x89
74 #define YAS537_SRST 0x90
75 #define YAS537_ADCCAL 0x91
76 #define YAS537_MTC 0x93
77 #define YAS537_OC 0x9E
78 #define YAS537_TRM 0x9F
79 #define YAS537_CAL 0xC0
80
81 /* Bits in the YAS5xx config register */
82 #define YAS5XX_CONFIG_INTON BIT(0) /* Interrupt on? */
83 #define YAS5XX_CONFIG_INTHACT BIT(1) /* Interrupt active high? */
84 #define YAS5XX_CONFIG_CCK_MASK GENMASK(4, 2)
85 #define YAS5XX_CONFIG_CCK_SHIFT 2
86
87 /* Bits in the measure command register */
88 #define YAS5XX_MEASURE_START BIT(0)
89 #define YAS5XX_MEASURE_LDTC BIT(1)
90 #define YAS5XX_MEASURE_FORS BIT(2)
91 #define YAS5XX_MEASURE_DLYMES BIT(4)
92 #define YAS5XX_MEASURE_CONT BIT(5)
93
94 /* Bits in the measure data register */
95 #define YAS5XX_MEASURE_DATA_BUSY BIT(7)
96
97 #define YAS530_DEVICE_ID 0x01 /* YAS530 (MS-3E) */
98 #define YAS530_VERSION_A 0 /* YAS530 (MS-3E A) */
99 #define YAS530_VERSION_B 1 /* YAS530B (MS-3E B) */
100 #define YAS530_VERSION_A_COEF 380
101 #define YAS530_VERSION_B_COEF 550
102 #define YAS530_DATA_BITS 12
103 #define YAS530_DATA_CENTER BIT(YAS530_DATA_BITS - 1)
104 #define YAS530_DATA_OVERFLOW (BIT(YAS530_DATA_BITS) - 1)
105
106 #define YAS532_DEVICE_ID 0x02 /* YAS532/YAS533 (MS-3R/F) */
107 #define YAS532_VERSION_AB 0 /* YAS532/533 AB (MS-3R/F AB) */
108 #define YAS532_VERSION_AC 1 /* YAS532/533 AC (MS-3R/F AC) */
109 #define YAS532_VERSION_AB_COEF 1800
110 #define YAS532_VERSION_AC_COEF_X 850
111 #define YAS532_VERSION_AC_COEF_Y1 750
112 #define YAS532_VERSION_AC_COEF_Y2 750
113 #define YAS532_DATA_BITS 13
114 #define YAS532_DATA_CENTER BIT(YAS532_DATA_BITS - 1)
115 #define YAS532_DATA_OVERFLOW (BIT(YAS532_DATA_BITS) - 1)
116
117 #define YAS537_DEVICE_ID 0x07 /* YAS537 (MS-3T) */
118 #define YAS537_VERSION_0 0 /* Version naming unknown */
119 #define YAS537_VERSION_1 1 /* Version naming unknown */
120 #define YAS537_MAG_AVERAGE_32_MASK GENMASK(6, 4)
121 #define YAS537_MEASURE_TIME_WORST_US 1500
122 #define YAS537_DEFAULT_SENSOR_DELAY_MS 50
123 #define YAS537_MAG_RCOIL_TIME_US 65
124 #define YAS537_MTC3_MASK_PREP GENMASK(7, 0)
125 #define YAS537_MTC3_MASK_GET GENMASK(7, 5)
126 #define YAS537_MTC3_ADD_BIT BIT(4)
127 #define YAS537_HCK_MASK_PREP GENMASK(4, 0)
128 #define YAS537_HCK_MASK_GET GENMASK(7, 4)
129 #define YAS537_LCK_MASK_PREP GENMASK(4, 0)
130 #define YAS537_LCK_MASK_GET GENMASK(3, 0)
131 #define YAS537_OC_MASK_GET GENMASK(5, 0)
132
133 /* Turn off device regulators etc after 5 seconds of inactivity */
134 #define YAS5XX_AUTOSUSPEND_DELAY_MS 5000
135
136 enum chip_ids {
137 yas530,
138 yas532,
139 yas533,
140 yas537,
141 };
142
143 static const int yas530_volatile_reg[] = {
144 YAS530_ACTUATE_INIT_COIL,
145 YAS530_MEASURE,
146 };
147
148 static const int yas537_volatile_reg[] = {
149 YAS537_MEASURE,
150 };
151
152 struct yas5xx_calibration {
153 /* Linearization calibration x, y1, y2 */
154 s32 r[3];
155 u32 f[3];
156 /* Temperature compensation calibration */
157 s16 Cx, Cy1, Cy2;
158 /* Misc calibration coefficients */
159 s8 a2, a3, a4, a6, a7, a8;
160 s16 a5, a9;
161 u8 k;
162 /* clock divider */
163 u8 dck;
164 };
165
166 struct yas5xx;
167
168 /**
169 * struct yas5xx_chip_info - device-specific data and function pointers
170 * @devid: device ID number
171 * @product_name: product name of the YAS variant
172 * @version_names: version letters or namings
173 * @volatile_reg: device-specific volatile registers
174 * @volatile_reg_qty: quantity of device-specific volatile registers
175 * @scaling_val2: scaling value for IIO_CHAN_INFO_SCALE
176 * @t_ref: number of counts at reference temperature 20 °C
177 * @min_temp_x10: starting point of temperature counting in 1/10:s degrees Celsius
178 * @get_measure: function pointer to get a measurement
179 * @get_calibration_data: function pointer to get calibration data
180 * @dump_calibration: function pointer to dump calibration for debugging
181 * @measure_offsets: function pointer to measure the offsets
182 * @power_on: function pointer to power-on procedure
183 *
184 * The "t_ref" value for YAS532/533 is known from the Android driver.
185 * For YAS530 and YAS537 it was approximately measured.
186 *
187 * The temperatures "min_temp_x10" are derived from the temperature resolutions
188 * given in the data sheets.
189 */
190 struct yas5xx_chip_info {
191 unsigned int devid;
192 const char *product_name;
193 const char *version_names[2];
194 const int *volatile_reg;
195 int volatile_reg_qty;
196 u32 scaling_val2;
197 u16 t_ref;
198 s16 min_temp_x10;
199 int (*get_measure)(struct yas5xx *yas5xx, s32 *to, s32 *xo, s32 *yo, s32 *zo);
200 int (*get_calibration_data)(struct yas5xx *yas5xx);
201 void (*dump_calibration)(struct yas5xx *yas5xx);
202 int (*measure_offsets)(struct yas5xx *yas5xx);
203 int (*power_on)(struct yas5xx *yas5xx);
204 };
205
206 /**
207 * struct yas5xx - state container for the YAS5xx driver
208 * @dev: parent device pointer
209 * @chip_info: device-specific data and function pointers
210 * @version: device version
211 * @calibration: calibration settings from the OTP storage
212 * @hard_offsets: offsets for each axis measured with initcoil actuated
213 * @orientation: mounting matrix, flipped axis etc
214 * @map: regmap to access the YAX5xx registers over I2C
215 * @regs: the vdd and vddio power regulators
216 * @reset: optional GPIO line used for handling RESET
217 * @lock: locks the magnetometer for exclusive use during a measurement (which
218 * involves several register transactions so the regmap lock is not enough)
219 * so that measurements get serialized in a first-come-first serve manner
220 * @scan: naturally aligned measurements
221 */
222 struct yas5xx {
223 struct device *dev;
224 const struct yas5xx_chip_info *chip_info;
225 unsigned int version;
226 struct yas5xx_calibration calibration;
227 s8 hard_offsets[3];
228 struct iio_mount_matrix orientation;
229 struct regmap *map;
230 struct regulator_bulk_data regs[2];
231 struct gpio_desc *reset;
232 struct mutex lock;
233 /*
234 * The scanout is 4 x 32 bits in CPU endianness.
235 * Ensure timestamp is naturally aligned
236 */
237 struct {
238 s32 channels[4];
239 aligned_s64 ts;
240 } scan;
241 };
242
243 /* On YAS530 the x, y1 and y2 values are 12 bits */
yas530_extract_axis(u8 * data)244 static u16 yas530_extract_axis(u8 *data)
245 {
246 u16 val;
247
248 /*
249 * These are the bits used in a 16bit word:
250 * 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
251 * x x x x x x x x x x x x
252 */
253 val = get_unaligned_be16(&data[0]);
254 val = FIELD_GET(GENMASK(14, 3), val);
255 return val;
256 }
257
258 /* On YAS532 the x, y1 and y2 values are 13 bits */
yas532_extract_axis(u8 * data)259 static u16 yas532_extract_axis(u8 *data)
260 {
261 u16 val;
262
263 /*
264 * These are the bits used in a 16bit word:
265 * 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
266 * x x x x x x x x x x x x x
267 */
268 val = get_unaligned_be16(&data[0]);
269 val = FIELD_GET(GENMASK(14, 2), val);
270 return val;
271 }
272
273 /**
274 * yas530_measure() - Make a measure from the hardware
275 * @yas5xx: The device state
276 * @t: the raw temperature measurement
277 * @x: the raw x axis measurement
278 * @y1: the y1 axis measurement
279 * @y2: the y2 axis measurement
280 * @return: 0 on success or error code
281 *
282 * Used by YAS530, YAS532 and YAS533.
283 */
yas530_measure(struct yas5xx * yas5xx,u16 * t,u16 * x,u16 * y1,u16 * y2)284 static int yas530_measure(struct yas5xx *yas5xx, u16 *t, u16 *x, u16 *y1, u16 *y2)
285 {
286 const struct yas5xx_chip_info *ci = yas5xx->chip_info;
287 unsigned int busy;
288 u8 data[8];
289 int ret;
290 u16 val;
291
292 mutex_lock(&yas5xx->lock);
293 ret = regmap_write(yas5xx->map, YAS530_MEASURE, YAS5XX_MEASURE_START);
294 if (ret < 0)
295 goto out_unlock;
296
297 /*
298 * Typical time to measure 1500 us, max 2000 us so wait min 500 us
299 * and at most 20000 us (one magnitude more than the datsheet max)
300 * before timeout.
301 */
302 ret = regmap_read_poll_timeout(yas5xx->map, YAS5XX_MEASURE_DATA, busy,
303 !(busy & YAS5XX_MEASURE_DATA_BUSY),
304 500, 20000);
305 if (ret) {
306 dev_err(yas5xx->dev, "timeout waiting for measurement\n");
307 goto out_unlock;
308 }
309
310 ret = regmap_bulk_read(yas5xx->map, YAS5XX_MEASURE_DATA,
311 data, sizeof(data));
312 if (ret)
313 goto out_unlock;
314
315 mutex_unlock(&yas5xx->lock);
316
317 switch (ci->devid) {
318 case YAS530_DEVICE_ID:
319 /*
320 * The t value is 9 bits in big endian format
321 * These are the bits used in a 16bit word:
322 * 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
323 * x x x x x x x x x
324 */
325 val = get_unaligned_be16(&data[0]);
326 val = FIELD_GET(GENMASK(14, 6), val);
327 *t = val;
328 *x = yas530_extract_axis(&data[2]);
329 *y1 = yas530_extract_axis(&data[4]);
330 *y2 = yas530_extract_axis(&data[6]);
331 break;
332 case YAS532_DEVICE_ID:
333 /*
334 * The t value is 10 bits in big endian format
335 * These are the bits used in a 16bit word:
336 * 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
337 * x x x x x x x x x x
338 */
339 val = get_unaligned_be16(&data[0]);
340 val = FIELD_GET(GENMASK(14, 5), val);
341 *t = val;
342 *x = yas532_extract_axis(&data[2]);
343 *y1 = yas532_extract_axis(&data[4]);
344 *y2 = yas532_extract_axis(&data[6]);
345 break;
346 default:
347 dev_err(yas5xx->dev, "unknown data format\n");
348 ret = -EINVAL;
349 break;
350 }
351
352 return ret;
353
354 out_unlock:
355 mutex_unlock(&yas5xx->lock);
356 return ret;
357 }
358
359 /**
360 * yas537_measure() - Make a measure from the hardware
361 * @yas5xx: The device state
362 * @t: the raw temperature measurement
363 * @x: the raw x axis measurement
364 * @y1: the y1 axis measurement
365 * @y2: the y2 axis measurement
366 * @return: 0 on success or error code
367 */
yas537_measure(struct yas5xx * yas5xx,u16 * t,u16 * x,u16 * y1,u16 * y2)368 static int yas537_measure(struct yas5xx *yas5xx, u16 *t, u16 *x, u16 *y1, u16 *y2)
369 {
370 struct yas5xx_calibration *c = &yas5xx->calibration;
371 unsigned int busy;
372 u8 data[8];
373 u16 xy1y2[3];
374 s32 h[3], s[3];
375 int half_range = BIT(13);
376 int i, ret;
377
378 mutex_lock(&yas5xx->lock);
379
380 /* Contrary to YAS530/532, also a "cont" bit is set, meaning unknown */
381 ret = regmap_write(yas5xx->map, YAS537_MEASURE, YAS5XX_MEASURE_START |
382 YAS5XX_MEASURE_CONT);
383 if (ret < 0)
384 goto out_unlock;
385
386 /* Use same timeout like YAS530/532 but the bit is in data row 2 */
387 ret = regmap_read_poll_timeout(yas5xx->map, YAS5XX_MEASURE_DATA + 2, busy,
388 !(busy & YAS5XX_MEASURE_DATA_BUSY),
389 500, 20000);
390 if (ret) {
391 dev_err(yas5xx->dev, "timeout waiting for measurement\n");
392 goto out_unlock;
393 }
394
395 ret = regmap_bulk_read(yas5xx->map, YAS5XX_MEASURE_DATA,
396 data, sizeof(data));
397 if (ret)
398 goto out_unlock;
399
400 mutex_unlock(&yas5xx->lock);
401
402 *t = get_unaligned_be16(&data[0]);
403 xy1y2[0] = FIELD_GET(GENMASK(13, 0), get_unaligned_be16(&data[2]));
404 xy1y2[1] = get_unaligned_be16(&data[4]);
405 xy1y2[2] = get_unaligned_be16(&data[6]);
406
407 /* The second version of YAS537 needs to include calibration coefficients */
408 if (yas5xx->version == YAS537_VERSION_1) {
409 for (i = 0; i < 3; i++)
410 s[i] = xy1y2[i] - half_range;
411 h[0] = (c->k * (128 * s[0] + c->a2 * s[1] + c->a3 * s[2])) / half_range;
412 h[1] = (c->k * (c->a4 * s[0] + c->a5 * s[1] + c->a6 * s[2])) / half_range;
413 h[2] = (c->k * (c->a7 * s[0] + c->a8 * s[1] + c->a9 * s[2])) / half_range;
414 for (i = 0; i < 3; i++) {
415 h[i] = clamp(h[i], -half_range, half_range - 1);
416 xy1y2[i] = h[i] + half_range;
417 }
418 }
419
420 *x = xy1y2[0];
421 *y1 = xy1y2[1];
422 *y2 = xy1y2[2];
423
424 return 0;
425
426 out_unlock:
427 mutex_unlock(&yas5xx->lock);
428 return ret;
429 }
430
431 /* Used by YAS530, YAS532 and YAS533 */
yas530_linearize(struct yas5xx * yas5xx,u16 val,int axis)432 static s32 yas530_linearize(struct yas5xx *yas5xx, u16 val, int axis)
433 {
434 const struct yas5xx_chip_info *ci = yas5xx->chip_info;
435 struct yas5xx_calibration *c = &yas5xx->calibration;
436 static const s32 yas532ac_coef[] = {
437 YAS532_VERSION_AC_COEF_X,
438 YAS532_VERSION_AC_COEF_Y1,
439 YAS532_VERSION_AC_COEF_Y2,
440 };
441 s32 coef;
442
443 /* Select coefficients */
444 switch (ci->devid) {
445 case YAS530_DEVICE_ID:
446 if (yas5xx->version == YAS530_VERSION_A)
447 coef = YAS530_VERSION_A_COEF;
448 else
449 coef = YAS530_VERSION_B_COEF;
450 break;
451 case YAS532_DEVICE_ID:
452 if (yas5xx->version == YAS532_VERSION_AB)
453 coef = YAS532_VERSION_AB_COEF;
454 else
455 /* Elaborate coefficients */
456 coef = yas532ac_coef[axis];
457 break;
458 default:
459 dev_err(yas5xx->dev, "unknown device type\n");
460 return val;
461 }
462 /*
463 * Linearization formula:
464 *
465 * x' = x - (3721 + 50 * f) + (xoffset - r) * c
466 *
467 * Where f and r are calibration values, c is a per-device
468 * and sometimes per-axis coefficient.
469 */
470 return val - (3721 + 50 * c->f[axis]) +
471 (yas5xx->hard_offsets[axis] - c->r[axis]) * coef;
472 }
473
yas5xx_calc_temperature(struct yas5xx * yas5xx,u16 t)474 static s32 yas5xx_calc_temperature(struct yas5xx *yas5xx, u16 t)
475 {
476 const struct yas5xx_chip_info *ci = yas5xx->chip_info;
477 s32 to;
478 u16 t_ref;
479 s16 min_temp_x10;
480 int ref_temp_x10;
481
482 t_ref = ci->t_ref;
483 min_temp_x10 = ci->min_temp_x10;
484 ref_temp_x10 = 200;
485
486 to = (min_temp_x10 + ((ref_temp_x10 - min_temp_x10) * t / t_ref)) * 100;
487 return to;
488 }
489
490 /**
491 * yas530_get_measure() - Measure a sample of all axis and process
492 * @yas5xx: The device state
493 * @to: Temperature out
494 * @xo: X axis out
495 * @yo: Y axis out
496 * @zo: Z axis out
497 * @return: 0 on success or error code
498 *
499 * Used by YAS530, YAS532 and YAS533.
500 */
yas530_get_measure(struct yas5xx * yas5xx,s32 * to,s32 * xo,s32 * yo,s32 * zo)501 static int yas530_get_measure(struct yas5xx *yas5xx, s32 *to, s32 *xo, s32 *yo, s32 *zo)
502 {
503 const struct yas5xx_chip_info *ci = yas5xx->chip_info;
504 struct yas5xx_calibration *c = &yas5xx->calibration;
505 u16 t_ref, t_comp, t, x, y1, y2;
506 /* These are signed x, signed y1 etc */
507 s32 sx, sy1, sy2, sy, sz;
508 int ret;
509
510 /* We first get raw data that needs to be translated to [x,y,z] */
511 ret = yas530_measure(yas5xx, &t, &x, &y1, &y2);
512 if (ret)
513 return ret;
514
515 /* Do some linearization if available */
516 sx = yas530_linearize(yas5xx, x, 0);
517 sy1 = yas530_linearize(yas5xx, y1, 1);
518 sy2 = yas530_linearize(yas5xx, y2, 2);
519
520 /*
521 * Set the temperature for compensation (unit: counts):
522 * YAS532/YAS533 version AC uses the temperature deviation as a
523 * multiplier. YAS530 and YAS532 version AB use solely the t value.
524 */
525 t_ref = ci->t_ref;
526 if (ci->devid == YAS532_DEVICE_ID &&
527 yas5xx->version == YAS532_VERSION_AC) {
528 t_comp = t - t_ref;
529 } else {
530 t_comp = t;
531 }
532
533 /*
534 * Temperature compensation for x, y1, y2 respectively:
535 *
536 * Cx * t_comp
537 * x' = x - -----------
538 * 100
539 */
540 sx = sx - (c->Cx * t_comp) / 100;
541 sy1 = sy1 - (c->Cy1 * t_comp) / 100;
542 sy2 = sy2 - (c->Cy2 * t_comp) / 100;
543
544 /*
545 * Break y1 and y2 into y and z, y1 and y2 are apparently encoding
546 * y and z.
547 */
548 sy = sy1 - sy2;
549 sz = -sy1 - sy2;
550
551 /* Calculate temperature readout */
552 *to = yas5xx_calc_temperature(yas5xx, t);
553
554 /*
555 * Calibrate [x,y,z] with some formulas like this:
556 *
557 * 100 * x + a_2 * y + a_3 * z
558 * x' = k * ---------------------------
559 * 10
560 *
561 * a_4 * x + a_5 * y + a_6 * z
562 * y' = k * ---------------------------
563 * 10
564 *
565 * a_7 * x + a_8 * y + a_9 * z
566 * z' = k * ---------------------------
567 * 10
568 */
569 *xo = c->k * ((100 * sx + c->a2 * sy + c->a3 * sz) / 10);
570 *yo = c->k * ((c->a4 * sx + c->a5 * sy + c->a6 * sz) / 10);
571 *zo = c->k * ((c->a7 * sx + c->a8 * sy + c->a9 * sz) / 10);
572
573 return 0;
574 }
575
576 /**
577 * yas537_get_measure() - Measure a sample of all axis and process
578 * @yas5xx: The device state
579 * @to: Temperature out
580 * @xo: X axis out
581 * @yo: Y axis out
582 * @zo: Z axis out
583 * @return: 0 on success or error code
584 */
yas537_get_measure(struct yas5xx * yas5xx,s32 * to,s32 * xo,s32 * yo,s32 * zo)585 static int yas537_get_measure(struct yas5xx *yas5xx, s32 *to, s32 *xo, s32 *yo, s32 *zo)
586 {
587 u16 t, x, y1, y2;
588 int ret;
589
590 /* We first get raw data that needs to be translated to [x,y,z] */
591 ret = yas537_measure(yas5xx, &t, &x, &y1, &y2);
592 if (ret)
593 return ret;
594
595 /* Calculate temperature readout */
596 *to = yas5xx_calc_temperature(yas5xx, t);
597
598 /*
599 * Unfortunately, no linearization or temperature compensation formulas
600 * are known for YAS537.
601 */
602
603 /* Calculate x, y, z from x, y1, y2 */
604 *xo = (x - BIT(13)) * 300;
605 *yo = (y1 - y2) * 1732 / 10;
606 *zo = (-y1 - y2 + BIT(14)) * 300;
607
608 return 0;
609 }
610
yas5xx_read_raw(struct iio_dev * indio_dev,struct iio_chan_spec const * chan,int * val,int * val2,long mask)611 static int yas5xx_read_raw(struct iio_dev *indio_dev,
612 struct iio_chan_spec const *chan,
613 int *val, int *val2,
614 long mask)
615 {
616 struct yas5xx *yas5xx = iio_priv(indio_dev);
617 const struct yas5xx_chip_info *ci = yas5xx->chip_info;
618 s32 t, x, y, z;
619 int ret;
620
621 switch (mask) {
622 case IIO_CHAN_INFO_PROCESSED:
623 case IIO_CHAN_INFO_RAW:
624 pm_runtime_get_sync(yas5xx->dev);
625 ret = ci->get_measure(yas5xx, &t, &x, &y, &z);
626 pm_runtime_put_autosuspend(yas5xx->dev);
627 if (ret)
628 return ret;
629 switch (chan->address) {
630 case 0:
631 *val = t;
632 break;
633 case 1:
634 *val = x;
635 break;
636 case 2:
637 *val = y;
638 break;
639 case 3:
640 *val = z;
641 break;
642 default:
643 dev_err(yas5xx->dev, "unknown channel\n");
644 return -EINVAL;
645 }
646 return IIO_VAL_INT;
647 case IIO_CHAN_INFO_SCALE:
648 *val = 1;
649 *val2 = ci->scaling_val2;
650 return IIO_VAL_FRACTIONAL;
651 default:
652 /* Unknown request */
653 return -EINVAL;
654 }
655 }
656
yas5xx_fill_buffer(struct iio_dev * indio_dev)657 static void yas5xx_fill_buffer(struct iio_dev *indio_dev)
658 {
659 struct yas5xx *yas5xx = iio_priv(indio_dev);
660 const struct yas5xx_chip_info *ci = yas5xx->chip_info;
661 s32 t, x, y, z;
662 int ret;
663
664 pm_runtime_get_sync(yas5xx->dev);
665 ret = ci->get_measure(yas5xx, &t, &x, &y, &z);
666 pm_runtime_put_autosuspend(yas5xx->dev);
667 if (ret) {
668 dev_err(yas5xx->dev, "error refilling buffer\n");
669 return;
670 }
671 yas5xx->scan.channels[0] = t;
672 yas5xx->scan.channels[1] = x;
673 yas5xx->scan.channels[2] = y;
674 yas5xx->scan.channels[3] = z;
675 iio_push_to_buffers_with_ts(indio_dev, &yas5xx->scan, sizeof(yas5xx->scan),
676 iio_get_time_ns(indio_dev));
677 }
678
yas5xx_handle_trigger(int irq,void * p)679 static irqreturn_t yas5xx_handle_trigger(int irq, void *p)
680 {
681 const struct iio_poll_func *pf = p;
682 struct iio_dev *indio_dev = pf->indio_dev;
683
684 yas5xx_fill_buffer(indio_dev);
685 iio_trigger_notify_done(indio_dev->trig);
686
687 return IRQ_HANDLED;
688 }
689
690
691 static const struct iio_mount_matrix *
yas5xx_get_mount_matrix(const struct iio_dev * indio_dev,const struct iio_chan_spec * chan)692 yas5xx_get_mount_matrix(const struct iio_dev *indio_dev,
693 const struct iio_chan_spec *chan)
694 {
695 struct yas5xx *yas5xx = iio_priv(indio_dev);
696
697 return &yas5xx->orientation;
698 }
699
700 static const struct iio_chan_spec_ext_info yas5xx_ext_info[] = {
701 IIO_MOUNT_MATRIX(IIO_SHARED_BY_DIR, yas5xx_get_mount_matrix),
702 { }
703 };
704
705 #define YAS5XX_AXIS_CHANNEL(axis, index) \
706 { \
707 .type = IIO_MAGN, \
708 .modified = 1, \
709 .channel2 = IIO_MOD_##axis, \
710 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
711 BIT(IIO_CHAN_INFO_SCALE), \
712 .ext_info = yas5xx_ext_info, \
713 .address = index, \
714 .scan_index = index, \
715 .scan_type = { \
716 .sign = 's', \
717 .realbits = 32, \
718 .storagebits = 32, \
719 .endianness = IIO_CPU, \
720 }, \
721 }
722
723 static const struct iio_chan_spec yas5xx_channels[] = {
724 {
725 .type = IIO_TEMP,
726 .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
727 .address = 0,
728 .scan_index = 0,
729 .scan_type = {
730 .sign = 's',
731 .realbits = 32,
732 .storagebits = 32,
733 .endianness = IIO_CPU,
734 },
735 },
736 YAS5XX_AXIS_CHANNEL(X, 1),
737 YAS5XX_AXIS_CHANNEL(Y, 2),
738 YAS5XX_AXIS_CHANNEL(Z, 3),
739 IIO_CHAN_SOFT_TIMESTAMP(4),
740 };
741
742 static const unsigned long yas5xx_scan_masks[] = { GENMASK(3, 0), 0 };
743
744 static const struct iio_info yas5xx_info = {
745 .read_raw = &yas5xx_read_raw,
746 };
747
yas5xx_volatile_reg(struct device * dev,unsigned int reg)748 static bool yas5xx_volatile_reg(struct device *dev, unsigned int reg)
749 {
750 struct iio_dev *indio_dev = dev_get_drvdata(dev);
751 struct yas5xx *yas5xx = iio_priv(indio_dev);
752 const struct yas5xx_chip_info *ci = yas5xx->chip_info;
753 int reg_qty;
754 int i;
755
756 if (reg >= YAS5XX_MEASURE_DATA && reg < YAS5XX_MEASURE_DATA + 8)
757 return true;
758
759 /*
760 * YAS versions share different registers on the same address,
761 * need to differentiate.
762 */
763 reg_qty = ci->volatile_reg_qty;
764 for (i = 0; i < reg_qty; i++) {
765 if (reg == ci->volatile_reg[i])
766 return true;
767 }
768
769 return false;
770 }
771
772 /* TODO: enable regmap cache, using mark dirty and sync at runtime resume */
773 static const struct regmap_config yas5xx_regmap_config = {
774 .reg_bits = 8,
775 .val_bits = 8,
776 .max_register = 0xff,
777 .volatile_reg = yas5xx_volatile_reg,
778 };
779
780 /**
781 * yas530_extract_calibration() - extracts the a2-a9 and k calibration
782 * @data: the bitfield to use
783 * @c: the calibration to populate
784 *
785 * Used by YAS530, YAS532 and YAS533.
786 */
yas530_extract_calibration(u8 * data,struct yas5xx_calibration * c)787 static void yas530_extract_calibration(u8 *data, struct yas5xx_calibration *c)
788 {
789 u64 val = get_unaligned_be64(data);
790
791 /*
792 * Bitfield layout for the axis calibration data, for factor
793 * a2 = 2 etc, k = k, c = clock divider
794 *
795 * n 7 6 5 4 3 2 1 0
796 * 0 [ 2 2 2 2 2 2 3 3 ] bits 63 .. 56
797 * 1 [ 3 3 4 4 4 4 4 4 ] bits 55 .. 48
798 * 2 [ 5 5 5 5 5 5 6 6 ] bits 47 .. 40
799 * 3 [ 6 6 6 6 7 7 7 7 ] bits 39 .. 32
800 * 4 [ 7 7 7 8 8 8 8 8 ] bits 31 .. 24
801 * 5 [ 8 9 9 9 9 9 9 9 ] bits 23 .. 16
802 * 6 [ 9 k k k k k c c ] bits 15 .. 8
803 * 7 [ c x x x x x x x ] bits 7 .. 0
804 */
805 c->a2 = FIELD_GET(GENMASK_ULL(63, 58), val) - 32;
806 c->a3 = FIELD_GET(GENMASK_ULL(57, 54), val) - 8;
807 c->a4 = FIELD_GET(GENMASK_ULL(53, 48), val) - 32;
808 c->a5 = FIELD_GET(GENMASK_ULL(47, 42), val) + 38;
809 c->a6 = FIELD_GET(GENMASK_ULL(41, 36), val) - 32;
810 c->a7 = FIELD_GET(GENMASK_ULL(35, 29), val) - 64;
811 c->a8 = FIELD_GET(GENMASK_ULL(28, 23), val) - 32;
812 c->a9 = FIELD_GET(GENMASK_ULL(22, 15), val);
813 c->k = FIELD_GET(GENMASK_ULL(14, 10), val) + 10;
814 c->dck = FIELD_GET(GENMASK_ULL(9, 7), val);
815 }
816
yas530_get_calibration_data(struct yas5xx * yas5xx)817 static int yas530_get_calibration_data(struct yas5xx *yas5xx)
818 {
819 struct yas5xx_calibration *c = &yas5xx->calibration;
820 u8 data[16];
821 u32 val;
822 int ret;
823
824 /* Dummy read, first read is ALWAYS wrong */
825 ret = regmap_bulk_read(yas5xx->map, YAS530_CAL, data, sizeof(data));
826 if (ret)
827 return ret;
828
829 /* Actual calibration readout */
830 ret = regmap_bulk_read(yas5xx->map, YAS530_CAL, data, sizeof(data));
831 if (ret)
832 return ret;
833 dev_dbg(yas5xx->dev, "calibration data: %16ph\n", data);
834
835 /* Contribute calibration data to the input pool for kernel entropy */
836 add_device_randomness(data, sizeof(data));
837
838 /* Extract version */
839 yas5xx->version = data[15] & GENMASK(1, 0);
840
841 /* Extract the calibration from the bitfield */
842 c->Cx = data[0] * 6 - 768;
843 c->Cy1 = data[1] * 6 - 768;
844 c->Cy2 = data[2] * 6 - 768;
845 yas530_extract_calibration(&data[3], c);
846
847 /*
848 * Extract linearization:
849 * Linearization layout in the 32 bits at byte 11:
850 * The r factors are 6 bit values where bit 5 is the sign
851 *
852 * n 7 6 5 4 3 2 1 0
853 * 0 [ xx xx xx r0 r0 r0 r0 r0 ] bits 31 .. 24
854 * 1 [ r0 f0 f0 r1 r1 r1 r1 r1 ] bits 23 .. 16
855 * 2 [ r1 f1 f1 r2 r2 r2 r2 r2 ] bits 15 .. 8
856 * 3 [ r2 f2 f2 xx xx xx xx xx ] bits 7 .. 0
857 */
858 val = get_unaligned_be32(&data[11]);
859 c->f[0] = FIELD_GET(GENMASK(22, 21), val);
860 c->f[1] = FIELD_GET(GENMASK(14, 13), val);
861 c->f[2] = FIELD_GET(GENMASK(6, 5), val);
862 c->r[0] = sign_extend32(FIELD_GET(GENMASK(28, 23), val), 5);
863 c->r[1] = sign_extend32(FIELD_GET(GENMASK(20, 15), val), 5);
864 c->r[2] = sign_extend32(FIELD_GET(GENMASK(12, 7), val), 5);
865
866 return 0;
867 }
868
yas532_get_calibration_data(struct yas5xx * yas5xx)869 static int yas532_get_calibration_data(struct yas5xx *yas5xx)
870 {
871 struct yas5xx_calibration *c = &yas5xx->calibration;
872 u8 data[14];
873 u32 val;
874 int ret;
875
876 /* Dummy read, first read is ALWAYS wrong */
877 ret = regmap_bulk_read(yas5xx->map, YAS530_CAL, data, sizeof(data));
878 if (ret)
879 return ret;
880 /* Actual calibration readout */
881 ret = regmap_bulk_read(yas5xx->map, YAS530_CAL, data, sizeof(data));
882 if (ret)
883 return ret;
884 dev_dbg(yas5xx->dev, "calibration data: %14ph\n", data);
885
886 /* Sanity check, is this all zeroes? */
887 if (!memchr_inv(data, 0x00, 13) && !(data[13] & BIT(7)))
888 dev_warn(yas5xx->dev, "calibration is blank!\n");
889
890 /* Contribute calibration data to the input pool for kernel entropy */
891 add_device_randomness(data, sizeof(data));
892
893 /* Only one bit of version info reserved here as far as we know */
894 yas5xx->version = data[13] & BIT(0);
895
896 /* Extract calibration from the bitfield */
897 c->Cx = data[0] * 10 - 1280;
898 c->Cy1 = data[1] * 10 - 1280;
899 c->Cy2 = data[2] * 10 - 1280;
900 yas530_extract_calibration(&data[3], c);
901
902 /*
903 * Extract linearization:
904 * Linearization layout in the 32 bits at byte 10:
905 * The r factors are 6 bit values where bit 5 is the sign
906 *
907 * n 7 6 5 4 3 2 1 0
908 * 0 [ xx r0 r0 r0 r0 r0 r0 f0 ] bits 31 .. 24
909 * 1 [ f0 r1 r1 r1 r1 r1 r1 f1 ] bits 23 .. 16
910 * 2 [ f1 r2 r2 r2 r2 r2 r2 f2 ] bits 15 .. 8
911 * 3 [ f2 xx xx xx xx xx xx xx ] bits 7 .. 0
912 */
913 val = get_unaligned_be32(&data[10]);
914 c->f[0] = FIELD_GET(GENMASK(24, 23), val);
915 c->f[1] = FIELD_GET(GENMASK(16, 15), val);
916 c->f[2] = FIELD_GET(GENMASK(8, 7), val);
917 c->r[0] = sign_extend32(FIELD_GET(GENMASK(30, 25), val), 5);
918 c->r[1] = sign_extend32(FIELD_GET(GENMASK(22, 17), val), 5);
919 c->r[2] = sign_extend32(FIELD_GET(GENMASK(14, 7), val), 5);
920
921 return 0;
922 }
923
yas537_get_calibration_data(struct yas5xx * yas5xx)924 static int yas537_get_calibration_data(struct yas5xx *yas5xx)
925 {
926 struct yas5xx_calibration *c = &yas5xx->calibration;
927 u8 data[17];
928 u32 val1, val2, val3, val4;
929 int i, ret;
930
931 /* Writing SRST register */
932 ret = regmap_write(yas5xx->map, YAS537_SRST, BIT(1));
933 if (ret)
934 return ret;
935
936 /* Calibration readout, YAS537 needs one readout only */
937 ret = regmap_bulk_read(yas5xx->map, YAS537_CAL, data, sizeof(data));
938 if (ret)
939 return ret;
940 dev_dbg(yas5xx->dev, "calibration data: %17ph\n", data);
941
942 /* Sanity check, is this all zeroes? */
943 if (!memchr_inv(data, 0x00, 16) && !FIELD_GET(GENMASK(5, 0), data[16]))
944 dev_warn(yas5xx->dev, "calibration is blank!\n");
945
946 /* Contribute calibration data to the input pool for kernel entropy */
947 add_device_randomness(data, sizeof(data));
948
949 /* Extract version information */
950 yas5xx->version = FIELD_GET(GENMASK(7, 6), data[16]);
951
952 /* There are two versions of YAS537 behaving differently */
953 switch (yas5xx->version) {
954 case YAS537_VERSION_0:
955 /*
956 * The first version simply writes data back into registers:
957 *
958 * data[0] YAS537_MTC 0x93
959 * data[1] 0x94
960 * data[2] 0x95
961 * data[3] 0x96
962 * data[4] 0x97
963 * data[5] 0x98
964 * data[6] 0x99
965 * data[7] 0x9a
966 * data[8] 0x9b
967 * data[9] 0x9c
968 * data[10] 0x9d
969 * data[11] YAS537_OC 0x9e
970 *
971 * data[12] YAS537_OFFSET_X 0x84
972 * data[13] YAS537_OFFSET_Y1 0x85
973 * data[14] YAS537_OFFSET_Y2 0x86
974 *
975 * data[15] YAS537_HCK 0x88
976 * data[16] YAS537_LCK 0x89
977 */
978 for (i = 0; i < 12; i++) {
979 ret = regmap_write(yas5xx->map, YAS537_MTC + i,
980 data[i]);
981 if (ret)
982 return ret;
983 }
984 for (i = 0; i < 3; i++) {
985 ret = regmap_write(yas5xx->map, YAS537_OFFSET_X + i,
986 data[i + 12]);
987 if (ret)
988 return ret;
989 yas5xx->hard_offsets[i] = data[i + 12];
990 }
991 for (i = 0; i < 2; i++) {
992 ret = regmap_write(yas5xx->map, YAS537_HCK + i,
993 data[i + 15]);
994 if (ret)
995 return ret;
996 }
997 break;
998 case YAS537_VERSION_1:
999 /*
1000 * The second version writes some data into registers but also
1001 * extracts calibration coefficients.
1002 *
1003 * Registers being written:
1004 *
1005 * data[0] YAS537_MTC 0x93
1006 * data[1] YAS537_MTC+1 0x94
1007 * data[2] YAS537_MTC+2 0x95
1008 * data[3] YAS537_MTC+3 (partially) 0x96
1009 *
1010 * data[12] YAS537_OFFSET_X 0x84
1011 * data[13] YAS537_OFFSET_Y1 0x85
1012 * data[14] YAS537_OFFSET_Y2 0x86
1013 *
1014 * data[15] YAS537_HCK (partially) 0x88
1015 * YAS537_LCK (partially) 0x89
1016 * data[16] YAS537_OC (partially) 0x9e
1017 */
1018 for (i = 0; i < 3; i++) {
1019 ret = regmap_write(yas5xx->map, YAS537_MTC + i,
1020 data[i]);
1021 if (ret)
1022 return ret;
1023 }
1024 for (i = 0; i < 3; i++) {
1025 ret = regmap_write(yas5xx->map, YAS537_OFFSET_X + i,
1026 data[i + 12]);
1027 if (ret)
1028 return ret;
1029 yas5xx->hard_offsets[i] = data[i + 12];
1030 }
1031 /*
1032 * Visualization of partially taken data:
1033 *
1034 * data[3] n 7 6 5 4 3 2 1 0
1035 * YAS537_MTC+3 x x x 1 0 0 0 0
1036 *
1037 * data[15] n 7 6 5 4 3 2 1 0
1038 * YAS537_HCK x x x x 0
1039 *
1040 * data[15] n 7 6 5 4 3 2 1 0
1041 * YAS537_LCK x x x x 0
1042 *
1043 * data[16] n 7 6 5 4 3 2 1 0
1044 * YAS537_OC x x x x x x
1045 */
1046 ret = regmap_write(yas5xx->map, YAS537_MTC + 3,
1047 FIELD_PREP(YAS537_MTC3_MASK_PREP,
1048 FIELD_GET(YAS537_MTC3_MASK_GET, data[3])) |
1049 YAS537_MTC3_ADD_BIT);
1050 if (ret)
1051 return ret;
1052 ret = regmap_write(yas5xx->map, YAS537_HCK,
1053 FIELD_PREP(YAS537_HCK_MASK_PREP,
1054 FIELD_GET(YAS537_HCK_MASK_GET, data[15])));
1055 if (ret)
1056 return ret;
1057 ret = regmap_write(yas5xx->map, YAS537_LCK,
1058 FIELD_PREP(YAS537_LCK_MASK_PREP,
1059 FIELD_GET(YAS537_LCK_MASK_GET, data[15])));
1060 if (ret)
1061 return ret;
1062 ret = regmap_write(yas5xx->map, YAS537_OC,
1063 FIELD_GET(YAS537_OC_MASK_GET, data[16]));
1064 if (ret)
1065 return ret;
1066 /*
1067 * For data extraction, build some blocks. Four 32-bit blocks
1068 * look appropriate.
1069 *
1070 * n 7 6 5 4 3 2 1 0
1071 * data[0] 0 [ Cx Cx Cx Cx Cx Cx Cx Cx ] bits 31 .. 24
1072 * data[1] 1 [ Cx C1 C1 C1 C1 C1 C1 C1 ] bits 23 .. 16
1073 * data[2] 2 [ C1 C1 C2 C2 C2 C2 C2 C2 ] bits 15 .. 8
1074 * data[3] 3 [ C2 C2 C2 ] bits 7 .. 0
1075 *
1076 * n 7 6 5 4 3 2 1 0
1077 * data[3] 0 [ a2 a2 a2 a2 a2 ] bits 31 .. 24
1078 * data[4] 1 [ a2 a2 a3 a3 a3 a3 a3 a3 ] bits 23 .. 16
1079 * data[5] 2 [ a3 a4 a4 a4 a4 a4 a4 a4 ] bits 15 .. 8
1080 * data[6] 3 [ a4 ] bits 7 .. 0
1081 *
1082 * n 7 6 5 4 3 2 1 0
1083 * data[6] 0 [ a5 a5 a5 a5 a5 a5 a5 ] bits 31 .. 24
1084 * data[7] 1 [ a5 a5 a6 a6 a6 a6 a6 a6 ] bits 23 .. 16
1085 * data[8] 2 [ a6 a7 a7 a7 a7 a7 a7 a7 ] bits 15 .. 8
1086 * data[9] 3 [ a7 ] bits 7 .. 0
1087 *
1088 * n 7 6 5 4 3 2 1 0
1089 * data[9] 0 [ a8 a8 a8 a8 a8 a8 a8 ] bits 31 .. 24
1090 * data[10] 1 [ a9 a9 a9 a9 a9 a9 a9 a9 ] bits 23 .. 16
1091 * data[11] 2 [ a9 k k k k k k k ] bits 15 .. 8
1092 * data[12] 3 [ ] bits 7 .. 0
1093 */
1094 val1 = get_unaligned_be32(&data[0]);
1095 val2 = get_unaligned_be32(&data[3]);
1096 val3 = get_unaligned_be32(&data[6]);
1097 val4 = get_unaligned_be32(&data[9]);
1098 /* Extract calibration coefficients and modify */
1099 c->Cx = FIELD_GET(GENMASK(31, 23), val1) - 256;
1100 c->Cy1 = FIELD_GET(GENMASK(22, 14), val1) - 256;
1101 c->Cy2 = FIELD_GET(GENMASK(13, 5), val1) - 256;
1102 c->a2 = FIELD_GET(GENMASK(28, 22), val2) - 64;
1103 c->a3 = FIELD_GET(GENMASK(21, 15), val2) - 64;
1104 c->a4 = FIELD_GET(GENMASK(14, 7), val2) - 128;
1105 c->a5 = FIELD_GET(GENMASK(30, 22), val3) - 112;
1106 c->a6 = FIELD_GET(GENMASK(21, 15), val3) - 64;
1107 c->a7 = FIELD_GET(GENMASK(14, 7), val3) - 128;
1108 c->a8 = FIELD_GET(GENMASK(30, 24), val4) - 64;
1109 c->a9 = FIELD_GET(GENMASK(23, 15), val4) - 112;
1110 c->k = FIELD_GET(GENMASK(14, 8), val4);
1111 break;
1112 default:
1113 dev_err(yas5xx->dev, "unknown version of YAS537\n");
1114 return -EINVAL;
1115 }
1116
1117 return 0;
1118 }
1119
1120 /* Used by YAS530, YAS532 and YAS533 */
yas530_dump_calibration(struct yas5xx * yas5xx)1121 static void yas530_dump_calibration(struct yas5xx *yas5xx)
1122 {
1123 struct yas5xx_calibration *c = &yas5xx->calibration;
1124
1125 dev_dbg(yas5xx->dev, "f[] = [%d, %d, %d]\n",
1126 c->f[0], c->f[1], c->f[2]);
1127 dev_dbg(yas5xx->dev, "r[] = [%d, %d, %d]\n",
1128 c->r[0], c->r[1], c->r[2]);
1129 dev_dbg(yas5xx->dev, "Cx = %d\n", c->Cx);
1130 dev_dbg(yas5xx->dev, "Cy1 = %d\n", c->Cy1);
1131 dev_dbg(yas5xx->dev, "Cy2 = %d\n", c->Cy2);
1132 dev_dbg(yas5xx->dev, "a2 = %d\n", c->a2);
1133 dev_dbg(yas5xx->dev, "a3 = %d\n", c->a3);
1134 dev_dbg(yas5xx->dev, "a4 = %d\n", c->a4);
1135 dev_dbg(yas5xx->dev, "a5 = %d\n", c->a5);
1136 dev_dbg(yas5xx->dev, "a6 = %d\n", c->a6);
1137 dev_dbg(yas5xx->dev, "a7 = %d\n", c->a7);
1138 dev_dbg(yas5xx->dev, "a8 = %d\n", c->a8);
1139 dev_dbg(yas5xx->dev, "a9 = %d\n", c->a9);
1140 dev_dbg(yas5xx->dev, "k = %d\n", c->k);
1141 dev_dbg(yas5xx->dev, "dck = %d\n", c->dck);
1142 }
1143
yas537_dump_calibration(struct yas5xx * yas5xx)1144 static void yas537_dump_calibration(struct yas5xx *yas5xx)
1145 {
1146 struct yas5xx_calibration *c = &yas5xx->calibration;
1147
1148 if (yas5xx->version == YAS537_VERSION_1) {
1149 dev_dbg(yas5xx->dev, "Cx = %d\n", c->Cx);
1150 dev_dbg(yas5xx->dev, "Cy1 = %d\n", c->Cy1);
1151 dev_dbg(yas5xx->dev, "Cy2 = %d\n", c->Cy2);
1152 dev_dbg(yas5xx->dev, "a2 = %d\n", c->a2);
1153 dev_dbg(yas5xx->dev, "a3 = %d\n", c->a3);
1154 dev_dbg(yas5xx->dev, "a4 = %d\n", c->a4);
1155 dev_dbg(yas5xx->dev, "a5 = %d\n", c->a5);
1156 dev_dbg(yas5xx->dev, "a6 = %d\n", c->a6);
1157 dev_dbg(yas5xx->dev, "a7 = %d\n", c->a7);
1158 dev_dbg(yas5xx->dev, "a8 = %d\n", c->a8);
1159 dev_dbg(yas5xx->dev, "a9 = %d\n", c->a9);
1160 dev_dbg(yas5xx->dev, "k = %d\n", c->k);
1161 }
1162 }
1163
1164 /* Used by YAS530, YAS532 and YAS533 */
yas530_set_offsets(struct yas5xx * yas5xx,s8 ox,s8 oy1,s8 oy2)1165 static int yas530_set_offsets(struct yas5xx *yas5xx, s8 ox, s8 oy1, s8 oy2)
1166 {
1167 int ret;
1168
1169 ret = regmap_write(yas5xx->map, YAS530_OFFSET_X, ox);
1170 if (ret)
1171 return ret;
1172 ret = regmap_write(yas5xx->map, YAS530_OFFSET_Y1, oy1);
1173 if (ret)
1174 return ret;
1175 return regmap_write(yas5xx->map, YAS530_OFFSET_Y2, oy2);
1176 }
1177
1178 /* Used by YAS530, YAS532 and YAS533 */
yas530_adjust_offset(s8 old,int bit,u16 center,u16 measure)1179 static s8 yas530_adjust_offset(s8 old, int bit, u16 center, u16 measure)
1180 {
1181 if (measure > center)
1182 return old + BIT(bit);
1183 if (measure < center)
1184 return old - BIT(bit);
1185 return old;
1186 }
1187
1188 /* Used by YAS530, YAS532 and YAS533 */
yas530_measure_offsets(struct yas5xx * yas5xx)1189 static int yas530_measure_offsets(struct yas5xx *yas5xx)
1190 {
1191 const struct yas5xx_chip_info *ci = yas5xx->chip_info;
1192 int ret;
1193 u16 center;
1194 u16 t, x, y1, y2;
1195 s8 ox, oy1, oy2;
1196 int i;
1197
1198 /* Actuate the init coil and measure offsets */
1199 ret = regmap_write(yas5xx->map, YAS530_ACTUATE_INIT_COIL, 0);
1200 if (ret)
1201 return ret;
1202
1203 /* When the initcoil is active this should be around the center */
1204 switch (ci->devid) {
1205 case YAS530_DEVICE_ID:
1206 center = YAS530_DATA_CENTER;
1207 break;
1208 case YAS532_DEVICE_ID:
1209 center = YAS532_DATA_CENTER;
1210 break;
1211 default:
1212 dev_err(yas5xx->dev, "unknown device type\n");
1213 return -EINVAL;
1214 }
1215
1216 /*
1217 * We set offsets in the interval +-31 by iterating
1218 * +-16, +-8, +-4, +-2, +-1 adjusting the offsets each
1219 * time, then writing the final offsets into the
1220 * registers.
1221 *
1222 * NOTE: these offsets are NOT in the same unit or magnitude
1223 * as the values for [x, y1, y2]. The value is +/-31
1224 * but the effect on the raw values is much larger.
1225 * The effect of the offset is to bring the measure
1226 * rougly to the center.
1227 */
1228 ox = 0;
1229 oy1 = 0;
1230 oy2 = 0;
1231
1232 for (i = 4; i >= 0; i--) {
1233 ret = yas530_set_offsets(yas5xx, ox, oy1, oy2);
1234 if (ret)
1235 return ret;
1236
1237 ret = yas530_measure(yas5xx, &t, &x, &y1, &y2);
1238 if (ret)
1239 return ret;
1240 dev_dbg(yas5xx->dev, "measurement %d: x=%d, y1=%d, y2=%d\n",
1241 5-i, x, y1, y2);
1242
1243 ox = yas530_adjust_offset(ox, i, center, x);
1244 oy1 = yas530_adjust_offset(oy1, i, center, y1);
1245 oy2 = yas530_adjust_offset(oy2, i, center, y2);
1246 }
1247
1248 /* Needed for calibration algorithm */
1249 yas5xx->hard_offsets[0] = ox;
1250 yas5xx->hard_offsets[1] = oy1;
1251 yas5xx->hard_offsets[2] = oy2;
1252 ret = yas530_set_offsets(yas5xx, ox, oy1, oy2);
1253 if (ret)
1254 return ret;
1255
1256 dev_info(yas5xx->dev, "discovered hard offsets: x=%d, y1=%d, y2=%d\n",
1257 ox, oy1, oy2);
1258 return 0;
1259 }
1260
1261 /* Used by YAS530, YAS532 and YAS533 */
yas530_power_on(struct yas5xx * yas5xx)1262 static int yas530_power_on(struct yas5xx *yas5xx)
1263 {
1264 unsigned int val;
1265 int ret;
1266
1267 /* Zero the test registers */
1268 ret = regmap_write(yas5xx->map, YAS530_TEST1, 0);
1269 if (ret)
1270 return ret;
1271 ret = regmap_write(yas5xx->map, YAS530_TEST2, 0);
1272 if (ret)
1273 return ret;
1274
1275 /* Set up for no interrupts, calibrated clock divider */
1276 val = FIELD_PREP(YAS5XX_CONFIG_CCK_MASK, yas5xx->calibration.dck);
1277 ret = regmap_write(yas5xx->map, YAS530_CONFIG, val);
1278 if (ret)
1279 return ret;
1280
1281 /* Measure interval 0 (back-to-back?) */
1282 return regmap_write(yas5xx->map, YAS530_MEASURE_INTERVAL, 0);
1283 }
1284
yas537_power_on(struct yas5xx * yas5xx)1285 static int yas537_power_on(struct yas5xx *yas5xx)
1286 {
1287 __be16 buf;
1288 int ret;
1289 u8 intrvl;
1290
1291 /* Writing ADCCAL and TRM registers */
1292 buf = cpu_to_be16(GENMASK(9, 3));
1293 ret = regmap_bulk_write(yas5xx->map, YAS537_ADCCAL, &buf, sizeof(buf));
1294 if (ret)
1295 return ret;
1296 ret = regmap_write(yas5xx->map, YAS537_TRM, GENMASK(7, 0));
1297 if (ret)
1298 return ret;
1299
1300 /* The interval value is static in regular operation */
1301 intrvl = (YAS537_DEFAULT_SENSOR_DELAY_MS * MILLI
1302 - YAS537_MEASURE_TIME_WORST_US) / 4100;
1303 ret = regmap_write(yas5xx->map, YAS537_MEASURE_INTERVAL, intrvl);
1304 if (ret)
1305 return ret;
1306
1307 /* The average value is also static in regular operation */
1308 ret = regmap_write(yas5xx->map, YAS537_AVR, YAS537_MAG_AVERAGE_32_MASK);
1309 if (ret)
1310 return ret;
1311
1312 /* Perform the "rcoil" part but skip the "last_after_rcoil" read */
1313 ret = regmap_write(yas5xx->map, YAS537_CONFIG, BIT(3));
1314 if (ret)
1315 return ret;
1316
1317 /* Wait until the coil has ramped up */
1318 usleep_range(YAS537_MAG_RCOIL_TIME_US, YAS537_MAG_RCOIL_TIME_US + 100);
1319
1320 return 0;
1321 }
1322
1323 static const struct yas5xx_chip_info yas5xx_chip_info_tbl[] = {
1324 [yas530] = {
1325 .devid = YAS530_DEVICE_ID,
1326 .product_name = "YAS530 MS-3E",
1327 .version_names = { "A", "B" },
1328 .volatile_reg = yas530_volatile_reg,
1329 .volatile_reg_qty = ARRAY_SIZE(yas530_volatile_reg),
1330 .scaling_val2 = 100000000, /* picotesla to Gauss */
1331 .t_ref = 182, /* counts */
1332 .min_temp_x10 = -620, /* 1/10:s degrees Celsius */
1333 .get_measure = yas530_get_measure,
1334 .get_calibration_data = yas530_get_calibration_data,
1335 .dump_calibration = yas530_dump_calibration,
1336 .measure_offsets = yas530_measure_offsets,
1337 .power_on = yas530_power_on,
1338 },
1339 [yas532] = {
1340 .devid = YAS532_DEVICE_ID,
1341 .product_name = "YAS532 MS-3R",
1342 .version_names = { "AB", "AC" },
1343 .volatile_reg = yas530_volatile_reg,
1344 .volatile_reg_qty = ARRAY_SIZE(yas530_volatile_reg),
1345 .scaling_val2 = 100000, /* nanotesla to Gauss */
1346 .t_ref = 390, /* counts */
1347 .min_temp_x10 = -500, /* 1/10:s degrees Celsius */
1348 .get_measure = yas530_get_measure,
1349 .get_calibration_data = yas532_get_calibration_data,
1350 .dump_calibration = yas530_dump_calibration,
1351 .measure_offsets = yas530_measure_offsets,
1352 .power_on = yas530_power_on,
1353 },
1354 [yas533] = {
1355 .devid = YAS532_DEVICE_ID,
1356 .product_name = "YAS533 MS-3F",
1357 .version_names = { "AB", "AC" },
1358 .volatile_reg = yas530_volatile_reg,
1359 .volatile_reg_qty = ARRAY_SIZE(yas530_volatile_reg),
1360 .scaling_val2 = 100000, /* nanotesla to Gauss */
1361 .t_ref = 390, /* counts */
1362 .min_temp_x10 = -500, /* 1/10:s degrees Celsius */
1363 .get_measure = yas530_get_measure,
1364 .get_calibration_data = yas532_get_calibration_data,
1365 .dump_calibration = yas530_dump_calibration,
1366 .measure_offsets = yas530_measure_offsets,
1367 .power_on = yas530_power_on,
1368 },
1369 [yas537] = {
1370 .devid = YAS537_DEVICE_ID,
1371 .product_name = "YAS537 MS-3T",
1372 .version_names = { "v0", "v1" }, /* version naming unknown */
1373 .volatile_reg = yas537_volatile_reg,
1374 .volatile_reg_qty = ARRAY_SIZE(yas537_volatile_reg),
1375 .scaling_val2 = 100000, /* nanotesla to Gauss */
1376 .t_ref = 8120, /* counts */
1377 .min_temp_x10 = -3860, /* 1/10:s degrees Celsius */
1378 .get_measure = yas537_get_measure,
1379 .get_calibration_data = yas537_get_calibration_data,
1380 .dump_calibration = yas537_dump_calibration,
1381 /* .measure_offets is not needed for yas537 */
1382 .power_on = yas537_power_on,
1383 },
1384 };
1385
yas5xx_probe(struct i2c_client * i2c)1386 static int yas5xx_probe(struct i2c_client *i2c)
1387 {
1388 const struct i2c_device_id *id = i2c_client_get_device_id(i2c);
1389 struct iio_dev *indio_dev;
1390 struct device *dev = &i2c->dev;
1391 struct yas5xx *yas5xx;
1392 const struct yas5xx_chip_info *ci;
1393 int id_check;
1394 int ret;
1395
1396 indio_dev = devm_iio_device_alloc(dev, sizeof(*yas5xx));
1397 if (!indio_dev)
1398 return -ENOMEM;
1399
1400 yas5xx = iio_priv(indio_dev);
1401 i2c_set_clientdata(i2c, indio_dev);
1402 yas5xx->dev = dev;
1403 mutex_init(&yas5xx->lock);
1404
1405 ret = iio_read_mount_matrix(dev, &yas5xx->orientation);
1406 if (ret)
1407 return ret;
1408
1409 yas5xx->regs[0].supply = "vdd";
1410 yas5xx->regs[1].supply = "iovdd";
1411 ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(yas5xx->regs),
1412 yas5xx->regs);
1413 if (ret)
1414 return dev_err_probe(dev, ret, "cannot get regulators\n");
1415
1416 ret = regulator_bulk_enable(ARRAY_SIZE(yas5xx->regs), yas5xx->regs);
1417 if (ret)
1418 return dev_err_probe(dev, ret, "cannot enable regulators\n");
1419
1420 /* See comment in runtime resume callback */
1421 usleep_range(31000, 40000);
1422
1423 /* This will take the device out of reset if need be */
1424 yas5xx->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
1425 if (IS_ERR(yas5xx->reset)) {
1426 ret = dev_err_probe(dev, PTR_ERR(yas5xx->reset), "failed to get reset line\n");
1427 goto reg_off;
1428 }
1429
1430 yas5xx->map = devm_regmap_init_i2c(i2c, &yas5xx_regmap_config);
1431 if (IS_ERR(yas5xx->map)) {
1432 ret = dev_err_probe(dev, PTR_ERR(yas5xx->map), "failed to allocate register map\n");
1433 goto assert_reset;
1434 }
1435
1436 ci = i2c_get_match_data(i2c);
1437 yas5xx->chip_info = ci;
1438
1439 ret = regmap_read(yas5xx->map, YAS5XX_DEVICE_ID, &id_check);
1440 if (ret)
1441 goto assert_reset;
1442
1443 if (id_check != ci->devid) {
1444 ret = dev_err_probe(dev, -ENODEV,
1445 "device ID %02x doesn't match %s\n",
1446 id_check, id->name);
1447 goto assert_reset;
1448 }
1449
1450 ret = ci->get_calibration_data(yas5xx);
1451 if (ret)
1452 goto assert_reset;
1453
1454 dev_info(dev, "detected %s %s\n", ci->product_name,
1455 ci->version_names[yas5xx->version]);
1456
1457 ci->dump_calibration(yas5xx);
1458
1459 ret = ci->power_on(yas5xx);
1460 if (ret)
1461 goto assert_reset;
1462
1463 if (ci->measure_offsets) {
1464 ret = ci->measure_offsets(yas5xx);
1465 if (ret)
1466 goto assert_reset;
1467 }
1468
1469 indio_dev->info = &yas5xx_info;
1470 indio_dev->available_scan_masks = yas5xx_scan_masks;
1471 indio_dev->modes = INDIO_DIRECT_MODE;
1472 indio_dev->name = id->name;
1473 indio_dev->channels = yas5xx_channels;
1474 indio_dev->num_channels = ARRAY_SIZE(yas5xx_channels);
1475
1476 ret = iio_triggered_buffer_setup(indio_dev, NULL,
1477 yas5xx_handle_trigger,
1478 NULL);
1479 if (ret) {
1480 dev_err_probe(dev, ret, "triggered buffer setup failed\n");
1481 goto assert_reset;
1482 }
1483
1484 ret = iio_device_register(indio_dev);
1485 if (ret) {
1486 dev_err_probe(dev, ret, "device register failed\n");
1487 goto cleanup_buffer;
1488 }
1489
1490 /* Take runtime PM online */
1491 pm_runtime_get_noresume(dev);
1492 pm_runtime_set_active(dev);
1493 pm_runtime_enable(dev);
1494
1495 pm_runtime_set_autosuspend_delay(dev, YAS5XX_AUTOSUSPEND_DELAY_MS);
1496 pm_runtime_use_autosuspend(dev);
1497 pm_runtime_put(dev);
1498
1499 return 0;
1500
1501 cleanup_buffer:
1502 iio_triggered_buffer_cleanup(indio_dev);
1503 assert_reset:
1504 gpiod_set_value_cansleep(yas5xx->reset, 1);
1505 reg_off:
1506 regulator_bulk_disable(ARRAY_SIZE(yas5xx->regs), yas5xx->regs);
1507
1508 return ret;
1509 }
1510
yas5xx_remove(struct i2c_client * i2c)1511 static void yas5xx_remove(struct i2c_client *i2c)
1512 {
1513 struct iio_dev *indio_dev = i2c_get_clientdata(i2c);
1514 struct yas5xx *yas5xx = iio_priv(indio_dev);
1515 struct device *dev = &i2c->dev;
1516
1517 iio_device_unregister(indio_dev);
1518 iio_triggered_buffer_cleanup(indio_dev);
1519 /*
1520 * Now we can't get any more reads from the device, which would
1521 * also call pm_runtime* functions and race with our disable
1522 * code. Disable PM runtime in orderly fashion and power down.
1523 */
1524 pm_runtime_get_sync(dev);
1525 pm_runtime_put_noidle(dev);
1526 pm_runtime_disable(dev);
1527 gpiod_set_value_cansleep(yas5xx->reset, 1);
1528 regulator_bulk_disable(ARRAY_SIZE(yas5xx->regs), yas5xx->regs);
1529 }
1530
yas5xx_runtime_suspend(struct device * dev)1531 static int yas5xx_runtime_suspend(struct device *dev)
1532 {
1533 struct iio_dev *indio_dev = dev_get_drvdata(dev);
1534 struct yas5xx *yas5xx = iio_priv(indio_dev);
1535
1536 gpiod_set_value_cansleep(yas5xx->reset, 1);
1537 regulator_bulk_disable(ARRAY_SIZE(yas5xx->regs), yas5xx->regs);
1538
1539 return 0;
1540 }
1541
yas5xx_runtime_resume(struct device * dev)1542 static int yas5xx_runtime_resume(struct device *dev)
1543 {
1544 struct iio_dev *indio_dev = dev_get_drvdata(dev);
1545 struct yas5xx *yas5xx = iio_priv(indio_dev);
1546 const struct yas5xx_chip_info *ci = yas5xx->chip_info;
1547 int ret;
1548
1549 ret = regulator_bulk_enable(ARRAY_SIZE(yas5xx->regs), yas5xx->regs);
1550 if (ret) {
1551 dev_err(dev, "cannot enable regulators\n");
1552 return ret;
1553 }
1554
1555 /*
1556 * The YAS530 datasheet says TVSKW is up to 30 ms, after that 1 ms
1557 * for all voltages to settle. The YAS532 is 10ms then 4ms for the
1558 * I2C to come online. Let's keep it safe and put this at 31ms.
1559 */
1560 usleep_range(31000, 40000);
1561 gpiod_set_value_cansleep(yas5xx->reset, 0);
1562
1563 ret = ci->power_on(yas5xx);
1564 if (ret) {
1565 dev_err(dev, "cannot power on\n");
1566 goto out_reset;
1567 }
1568
1569 return 0;
1570
1571 out_reset:
1572 gpiod_set_value_cansleep(yas5xx->reset, 1);
1573 regulator_bulk_disable(ARRAY_SIZE(yas5xx->regs), yas5xx->regs);
1574
1575 return ret;
1576 }
1577
1578 static DEFINE_RUNTIME_DEV_PM_OPS(yas5xx_dev_pm_ops, yas5xx_runtime_suspend,
1579 yas5xx_runtime_resume, NULL);
1580
1581 static const struct i2c_device_id yas5xx_id[] = {
1582 {"yas530", (kernel_ulong_t)&yas5xx_chip_info_tbl[yas530] },
1583 {"yas532", (kernel_ulong_t)&yas5xx_chip_info_tbl[yas532] },
1584 {"yas533", (kernel_ulong_t)&yas5xx_chip_info_tbl[yas533] },
1585 {"yas537", (kernel_ulong_t)&yas5xx_chip_info_tbl[yas537] },
1586 { }
1587 };
1588 MODULE_DEVICE_TABLE(i2c, yas5xx_id);
1589
1590 static const struct of_device_id yas5xx_of_match[] = {
1591 { .compatible = "yamaha,yas530", &yas5xx_chip_info_tbl[yas530] },
1592 { .compatible = "yamaha,yas532", &yas5xx_chip_info_tbl[yas532] },
1593 { .compatible = "yamaha,yas533", &yas5xx_chip_info_tbl[yas533] },
1594 { .compatible = "yamaha,yas537", &yas5xx_chip_info_tbl[yas537] },
1595 { }
1596 };
1597 MODULE_DEVICE_TABLE(of, yas5xx_of_match);
1598
1599 static struct i2c_driver yas5xx_driver = {
1600 .driver = {
1601 .name = "yas5xx",
1602 .of_match_table = yas5xx_of_match,
1603 .pm = pm_ptr(&yas5xx_dev_pm_ops),
1604 },
1605 .probe = yas5xx_probe,
1606 .remove = yas5xx_remove,
1607 .id_table = yas5xx_id,
1608 };
1609 module_i2c_driver(yas5xx_driver);
1610
1611 MODULE_DESCRIPTION("Yamaha YAS53x 3-axis magnetometer driver");
1612 MODULE_AUTHOR("Linus Walleij");
1613 MODULE_LICENSE("GPL v2");
1614