/linux/arch/arm/boot/dts/nxp/imx/ |
H A D | imx6dl-lanmcu.dts | 363 /* DSE 0x30 => 25 Ohm, 0x20 => 37 Ohm, 0x10 => 75 Ohm */ 364 MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x30 365 MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x30 366 MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x30 367 MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x30 368 MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x30 369 MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x30 370 MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x30 371 MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x30 372 MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x30 [all...] |
H A D | imx6dl-plym2m.dts | 492 /* DSE 0x30 => 25 Ohm, 0x20 => 37 Ohm, 0x10 => 75 Ohm */ 493 MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x30 494 MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x30 495 MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x30 496 MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x30 497 MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x30 498 MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x30 499 MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x30 500 MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x30 501 MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x30 [all...] |
/linux/net/wireless/certs/ |
H A D | sforshee.hex | 2 0x30, 0x82, 0x02, 0xa4, 0x30, 0x82, 0x01, 0x8c, 4 0xf9, 0xce, 0xa7, 0x30, 0x0d, 0x06, 0x09, 0x2a, 6 0x05, 0x00, 0x30, 0x13, 0x31, 0x11, 0x30, 0x0f, 8 0x66, 0x6f, 0x72, 0x73, 0x68, 0x65, 0x65, 0x30, 9 0x20, 0x17, 0x0d, 0x31, 0x37, 0x31, 0x30, 0x30, 10 0x36, 0x31, 0x39, 0x34, 0x30, 0x33, 0x35, 0x5a, 11 0x18, 0x0f, 0x32, 0x31, 0x31, 0x37, 0x30, [all...] |
H A D | wens.hex | 2 0x30, 0x82, 0x02, 0xa7, 0x30, 0x82, 0x01, 0x8f, 5 0x72, 0x48, 0xdb, 0x18, 0xc6, 0x00, 0x30, 0x0d, 7 0x01, 0x01, 0x0b, 0x05, 0x00, 0x30, 0x0f, 0x31, 8 0x0d, 0x30, 0x0b, 0x06, 0x03, 0x55, 0x04, 0x03, 9 0x0c, 0x04, 0x77, 0x65, 0x6e, 0x73, 0x30, 0x20, 10 0x17, 0x0d, 0x32, 0x33, 0x31, 0x32, 0x30, 0x31, 11 0x30, 0x37, 0x34, 0x31, 0x31, 0x34, 0x5a, 0x18, 12 0x0f, 0x32, 0x31, 0x32, 0x33, 0x31, 0x31, 0x30, 13 0x37, 0x30, [all...] |
/linux/drivers/scsi/aic7xxx/ |
H A D | aic7xxx_seq.h_shipped | 21 0x01, 0x4d, 0xc8, 0x30, 23 0x01, 0x39, 0xa2, 0x30, 29 0x01, 0x51, 0xc8, 0x30, 31 0x00, 0xbb, 0x30, 0x70, 33 0x01, 0xbf, 0x72, 0x30, 35 0x01, 0x90, 0x80, 0x30, 36 0x01, 0xf6, 0xd4, 0x30, 50 0x01, 0x50, 0xc8, 0x30, 86 0x01, 0x66, 0xac, 0x30, 117 0x01, 0x65, 0x3e, 0x30, [all...] |
H A D | aic79xx_seq.h_shipped | 11 0x01, 0xea, 0x04, 0x30, 27 0x02, 0x30, 0x51, 0x31, 32 0x02, 0x30, 0x51, 0x32, 45 0x30, 0x3f, 0xc0, 0x09, 46 0x30, 0xe0, 0x50, 0x60, 69 0x01, 0xea, 0x00, 0x30, 90 0x02, 0x30, 0x19, 0x33, 112 0x02, 0x50, 0x1d, 0x30, 114 0x60, 0x18, 0x30, 0x00, 115 0x7f, 0x18, 0x30, [all...] |
/linux/arch/arm64/kernel/ |
H A D | entry-ftrace.S | 25 * Each instrumented function follows the AAPCS, so here x0-x8 and x18-x30 are 51 bic x11, x30, 0x7 87 str x30, [sp, #FREGS_PC] 94 stp x29, x30, [sp, #FREGS_SIZE] 98 sub x0, x30, #AARCH64_INSN_SIZE // ip (callsite's BL insn) 115 * At the callsite x0-x8 and x19-x30 were live. Any C code will have preserved 117 * to restore x0-x8, x29, and x30. 135 ldr x30, [sp, #FREGS_LR] 156 ldr x30, [sp, #FREGS_PC] 175 mov x10, x30 [all...] |
H A D | efi-rt-wrapper.S | 10 stp x29, x30, [sp, #-112]! 55 ldp x29, x30, [sp], #112 75 mov sp, x30 85 ldp x29, x30, [sp], #112
|
H A D | entry.S | 49 mrs x30, tpidrro_el0 52 mov x30, xzr 436 ldr_this_cpu x30, this_cpu_vector, x29 438 msr vbar_el1, x30 // install vector table 439 ldr lr, [sp, #S_LR] // restore x30 688 msr tpidrro_el0, x30 // Restored in kernel_ventry 694 * ret out of tramp_ventry. It appears here because x30 is free. 696 __mitigate_spectre_bhb_loop x30 713 tramp_map_kernel x30 715 tramp_data_read_var x30, vector [all...] |
/linux/tools/testing/selftests/arm64/fp/ |
H A D | asm-utils.S | 49 str x30, [sp, #-32]! // Result can't be > 20 digits 70 ldr x30, [sp], #32 78 mov x5, x30 90 str x30, [sp, #-0x10]! 97 ldr x30, [sp], #0x10 115 str x30, [sp, #-0x10]! 126 1: ldr x30, [sp], #0x10
|
H A D | sve-test.S | 112 mov x4, x30 133 mov x4, x30 161 mov x4, x30 218 mov x3, x30 235 mov x30, x3 243 mov x3, x30 260 mov x30, x3 269 mov x3, x30 287 mov x30, x3 348 str x30, [s [all...] |
H A D | zt-test.S | 61 mov x4, x30 104 mov x3, x30 116 mov x30, x3 167 str x30, [sp, #-((sa_sz + 15) / 16 * 16 + 16)]! 191 1: ldr x30, [sp], #((sa_sz + 15) / 16 * 16 + 16)
|
H A D | fpsimd-test.S | 77 mov x4, x30 116 mov x3, x30 133 mov x30, x3 185 str x30, [sp, #-((sa_sz + 15) / 16 * 16 + 16)]! 209 1: ldr x30, [sp], #((sa_sz + 15) / 16 * 16 + 16)
|
/linux/Documentation/i2c/ |
H A D | slave-testunit-backend.rst | 19 Instantiating the device is regular. Example for bus 0, address 0x30:: 31 reg = <(0x30 | I2C_OWN_SLAVE_ADDRESS)>; 92 # i2cset -y 0 0x30 1 0x50 0x80 5 i 114 # i2cset -y 0 0x30 2 0x42 0x64 1 i 119 Detected HostNotify from address 0x30 148 # i2ctransfer -y 0 w3@0x30 3 1 0x10 r? 174 # i2ctransfer -y 0 w3@0x30 4 0 0 r128 175 0x76 0x36 0x2e 0x31 0x31 0x2e 0x30 0x2d 0x72 0x63 0x31 0x2d 0x30 0x30 [all...] |
/linux/arch/arm/boot/dts/ti/omap/ |
H A D | dm814x-clocks.dtsi | 24 reg = <0x80 0x30>; 35 reg = <0xb0 0x30>; 46 reg = <0xe0 0x30>; 57 reg = <0x110 0x30>; 68 reg = <0x140 0x30>; 79 reg = <0x170 0x30>; 90 reg = <0x1a0 0x30>; 101 reg = <0x1d0 0x30>; 112 reg = <0x200 0x30>; 123 reg = <0x230 0x30>; [all...] |
/linux/Documentation/dev-tools/ |
H A D | kfence.rst | 92 kunit_generic_run_threadfn_adapter+0x16/0x30 94 ret_from_fork+0x22/0x30 102 kunit_generic_run_threadfn_adapter+0x16/0x30 104 ret_from_fork+0x22/0x30 123 kunit_generic_run_threadfn_adapter+0x16/0x30 125 ret_from_fork+0x22/0x30 133 kunit_generic_run_threadfn_adapter+0x16/0x30 135 ret_from_fork+0x22/0x30 140 kunit_generic_run_threadfn_adapter+0x16/0x30 142 ret_from_fork+0x22/0x30 [all...] |
/linux/tools/testing/selftests/arm64/gcs/ |
H A D | gcs-stress-thread.S | 90 str x30, [sp, #-32]! // Result can't be > 20 digits 111 ldr x30, [sp], #32 119 mov x5, x30 156 str x30, [sp, #-((sa_sz + 15) / 16 * 16 + 16)]! 180 1: ldr x30, [sp], #((sa_sz + 15) / 16 * 16 + 16) 238 stp x29, x30, [sp, #-16]! 247 ldp x29, x30, [sp], #16
|
/linux/arch/arm/boot/dts/intel/pxa/ |
H A D | pxa2xx.dtsi | 98 reg = <0x40100000 0x30>; 106 reg = <0x40200000 0x30>; 114 reg = <0x40700000 0x30>; 122 reg = <0x41600000 0x30>; 129 reg = <0x40301680 0x30>;
|
/linux/drivers/net/wan/ |
H A D | wanxlfw.inc_shipped | 32 0x10,0x00,0x09,0xB0,0x00,0x00,0x19,0xAA,0x61,0x00,0x05,0x76,0x22,0x30,0x09,0xB0, 40 0x00,0x00,0x00,0x00,0x00,0x14,0x22,0x30,0x09,0xB0,0x00,0x00,0x18,0x72,0x33,0x41, 62 0x35,0x7C,0x00,0x1F,0x00,0x14,0x00,0xAA,0x00,0x00,0x00,0x30,0x00,0x00,0x4E,0x75, 65 0x03,0x70,0x22,0x30,0x09,0xB0,0x00,0x00,0x10,0x04,0x42,0xB0,0x19,0x90,0x4E,0x75, 67 0x22,0x30,0x09,0xB0,0x00,0x00,0x19,0x68,0x24,0x01,0x4C,0x3C,0x20,0x00,0x00,0x00, 71 0x00,0x04,0x24,0x30,0x29,0xA0,0x00,0x08,0x31,0x82,0x19,0xA0,0x00,0x02,0x56,0x82, 74 0x01,0x28,0x61,0x00,0x01,0xF6,0x08,0xF0,0x00,0x1F,0x19,0x90,0x22,0x30,0x09,0xB0, 77 0x19,0x78,0x60,0x00,0xFF,0x4C,0x4E,0x75,0x22,0x30,0x09,0xB0,0x00,0x00,0x19,0x88, 78 0xE7,0x89,0xD2,0xB0,0x09,0xB0,0x00,0x00,0x18,0x82,0x34,0x30,0x19,0x90,0x08,0x02, 81 0x0C,0xBC,0x0C,0x42,0x0C,0x00,0x66,0x00,0x00,0xDC,0x42,0x83,0x36,0x30, [all...] |
/linux/arch/arm64/boot/dts/marvell/mmp/ |
H A D | pxa1908-samsung-coreprimevelte.dts | 142 pinctrl-single,input-schmitt = <0 0x30>; 205 pinctrl-single,input-schmitt = <0 0x30>; 218 pinctrl-single,input-schmitt = <0 0x30>; 232 pinctrl-single,input-schmitt = <0 0x30>; 245 pinctrl-single,input-schmitt = <0 0x30>; 257 pinctrl-single,input-schmitt = <0 0x30>; 273 pinctrl-single,input-schmitt = <0 0x30>; 285 pinctrl-single,input-schmitt = <0 0x30>;
|
/linux/arch/arm/boot/dts/hisilicon/ |
H A D | hi3620-hi4511.dts | 343 pinctrl-single,drive-strength = <0x30 0xf0>; 357 pinctrl-single,drive-strength = <0x30 0xf0>; 452 pinctrl-single,drive-strength = <0x30 0xf0>; 461 pinctrl-single,drive-strength = <0x30 0xf0>; 470 pinctrl-single,drive-strength = <0x30 0xf0>; 479 pinctrl-single,drive-strength = <0x30 0xf0>; 489 pinctrl-single,drive-strength = <0x30 0xf0>; 500 pinctrl-single,drive-strength = <0x30 0xf0>; 510 pinctrl-single,drive-strength = <0x30 0xf0>; 518 pinctrl-single,drive-strength = <0x30 [all...] |
/linux/tools/testing/selftests/arm64/bti/ |
H A D | trampoline.S | 22 stp x29, x30, [sp, #-16]! 24 ldp x29, x30, [sp], #16
|
/linux/arch/arm64/kvm/hyp/ |
H A D | hyp-entry.S | 99 stp x29, x30, [sp, #-16]! 101 ldp x29, x30, [sp], #16 115 stp x29, x30, [sp, #-16]! 119 ldp x29, x30, [sp], #16
|
/linux/arch/arm64/lib/ |
H A D | kasan_sw_tags.S | 19 * x18 to x30: callee-saved 27 * sp + 232..247: x29 and x30 (same as in GPRs) 34 * x29 and x30 spilled by the caller as those match the GPRs). 54 mov x2, x30 68 ldp x29, x30, [sp, #8 * 29]
|
/linux/Documentation/translations/zh_CN/dev-tools/ |
H A D | kcsan.rst | 36 test_kernel_write+0x1d/0x30 39 ret_from_fork+0x22/0x30 45 ret_from_fork+0x22/0x30 67 ret_from_fork+0x22/0x30
|