1 /*
2 * USB Network driver infrastructure
3 * Copyright (C) 2000-2005 by David Brownell
4 * Copyright (C) 2003-2005 David Hollis <dhollis@davehollis.com>
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
19 */
20
21 /*
22 * This is a generic "USB networking" framework that works with several
23 * kinds of full and high speed networking devices: host-to-host cables,
24 * smart usb peripherals, and actual Ethernet adapters.
25 *
26 * These devices usually differ in terms of control protocols (if they
27 * even have one!) and sometimes they define new framing to wrap or batch
28 * Ethernet packets. Otherwise, they talk to USB pretty much the same,
29 * so interface (un)binding, endpoint I/O queues, fault handling, and other
30 * issues can usefully be addressed by this framework.
31 */
32
33 // #define DEBUG // error path messages, extra info
34 // #define VERBOSE // more; success messages
35
36 #include <linux/module.h>
37 #include <linux/init.h>
38 #include <linux/netdevice.h>
39 #include <linux/etherdevice.h>
40 #include <linux/ctype.h>
41 #include <linux/ethtool.h>
42 #include <linux/workqueue.h>
43 #include <linux/mii.h>
44 #include <linux/usb.h>
45 #include <linux/usb/usbnet.h>
46 #include <linux/slab.h>
47 #include <linux/kernel.h>
48 #include <linux/pm_runtime.h>
49
50 #define DRIVER_VERSION "22-Aug-2005"
51
52
53 /*-------------------------------------------------------------------------*/
54
55 /*
56 * Nineteen USB 1.1 max size bulk transactions per frame (ms), max.
57 * Several dozen bytes of IPv4 data can fit in two such transactions.
58 * One maximum size Ethernet packet takes twenty four of them.
59 * For high speed, each frame comfortably fits almost 36 max size
60 * Ethernet packets (so queues should be bigger).
61 *
62 * REVISIT qlens should be members of 'struct usbnet'; the goal is to
63 * let the USB host controller be busy for 5msec or more before an irq
64 * is required, under load. Jumbograms change the equation.
65 */
66 #define RX_MAX_QUEUE_MEMORY (60 * 1518)
67 #define RX_QLEN(dev) (((dev)->udev->speed == USB_SPEED_HIGH) ? \
68 (RX_MAX_QUEUE_MEMORY/(dev)->rx_urb_size) : 4)
69 #define TX_QLEN(dev) (((dev)->udev->speed == USB_SPEED_HIGH) ? \
70 (RX_MAX_QUEUE_MEMORY/(dev)->hard_mtu) : 4)
71
72 // reawaken network queue this soon after stopping; else watchdog barks
73 #define TX_TIMEOUT_JIFFIES (5*HZ)
74
75 // throttle rx/tx briefly after some faults, so khubd might disconnect()
76 // us (it polls at HZ/4 usually) before we report too many false errors.
77 #define THROTTLE_JIFFIES (HZ/8)
78
79 // between wakeups
80 #define UNLINK_TIMEOUT_MS 3
81
82 /*-------------------------------------------------------------------------*/
83
84 // randomly generated ethernet address
85 static u8 node_id [ETH_ALEN];
86
87 static const char driver_name [] = "usbnet";
88
89 /* use ethtool to change the level for any given device */
90 static int msg_level = -1;
91 module_param (msg_level, int, 0);
92 MODULE_PARM_DESC (msg_level, "Override default message level");
93
94 /*-------------------------------------------------------------------------*/
95
96 /* handles CDC Ethernet and many other network "bulk data" interfaces */
usbnet_get_endpoints(struct usbnet * dev,struct usb_interface * intf)97 int usbnet_get_endpoints(struct usbnet *dev, struct usb_interface *intf)
98 {
99 int tmp;
100 struct usb_host_interface *alt = NULL;
101 struct usb_host_endpoint *in = NULL, *out = NULL;
102 struct usb_host_endpoint *status = NULL;
103
104 for (tmp = 0; tmp < intf->num_altsetting; tmp++) {
105 unsigned ep;
106
107 in = out = status = NULL;
108 alt = intf->altsetting + tmp;
109
110 /* take the first altsetting with in-bulk + out-bulk;
111 * remember any status endpoint, just in case;
112 * ignore other endpoints and altsettings.
113 */
114 for (ep = 0; ep < alt->desc.bNumEndpoints; ep++) {
115 struct usb_host_endpoint *e;
116 int intr = 0;
117
118 e = alt->endpoint + ep;
119 switch (e->desc.bmAttributes) {
120 case USB_ENDPOINT_XFER_INT:
121 if (!usb_endpoint_dir_in(&e->desc))
122 continue;
123 intr = 1;
124 /* FALLTHROUGH */
125 case USB_ENDPOINT_XFER_BULK:
126 break;
127 default:
128 continue;
129 }
130 if (usb_endpoint_dir_in(&e->desc)) {
131 if (!intr && !in)
132 in = e;
133 else if (intr && !status)
134 status = e;
135 } else {
136 if (!out)
137 out = e;
138 }
139 }
140 if (in && out)
141 break;
142 }
143 if (!alt || !in || !out)
144 return -EINVAL;
145
146 if (alt->desc.bAlternateSetting != 0 ||
147 !(dev->driver_info->flags & FLAG_NO_SETINT)) {
148 tmp = usb_set_interface (dev->udev, alt->desc.bInterfaceNumber,
149 alt->desc.bAlternateSetting);
150 if (tmp < 0)
151 return tmp;
152 }
153
154 dev->in = usb_rcvbulkpipe (dev->udev,
155 in->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
156 dev->out = usb_sndbulkpipe (dev->udev,
157 out->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
158 dev->status = status;
159 return 0;
160 }
161 EXPORT_SYMBOL_GPL(usbnet_get_endpoints);
162
usbnet_get_ethernet_addr(struct usbnet * dev,int iMACAddress)163 int usbnet_get_ethernet_addr(struct usbnet *dev, int iMACAddress)
164 {
165 int tmp, i;
166 unsigned char buf [13];
167
168 tmp = usb_string(dev->udev, iMACAddress, buf, sizeof buf);
169 if (tmp != 12) {
170 dev_dbg(&dev->udev->dev,
171 "bad MAC string %d fetch, %d\n", iMACAddress, tmp);
172 if (tmp >= 0)
173 tmp = -EINVAL;
174 return tmp;
175 }
176 for (i = tmp = 0; i < 6; i++, tmp += 2)
177 dev->net->dev_addr [i] =
178 (hex_to_bin(buf[tmp]) << 4) + hex_to_bin(buf[tmp + 1]);
179 return 0;
180 }
181 EXPORT_SYMBOL_GPL(usbnet_get_ethernet_addr);
182
183 static void intr_complete (struct urb *urb);
184
init_status(struct usbnet * dev,struct usb_interface * intf)185 static int init_status (struct usbnet *dev, struct usb_interface *intf)
186 {
187 char *buf = NULL;
188 unsigned pipe = 0;
189 unsigned maxp;
190 unsigned period;
191
192 if (!dev->driver_info->status)
193 return 0;
194
195 pipe = usb_rcvintpipe (dev->udev,
196 dev->status->desc.bEndpointAddress
197 & USB_ENDPOINT_NUMBER_MASK);
198 maxp = usb_maxpacket (dev->udev, pipe, 0);
199
200 /* avoid 1 msec chatter: min 8 msec poll rate */
201 period = max ((int) dev->status->desc.bInterval,
202 (dev->udev->speed == USB_SPEED_HIGH) ? 7 : 3);
203
204 buf = kmalloc (maxp, GFP_KERNEL);
205 if (buf) {
206 dev->interrupt = usb_alloc_urb (0, GFP_KERNEL);
207 if (!dev->interrupt) {
208 kfree (buf);
209 return -ENOMEM;
210 } else {
211 usb_fill_int_urb(dev->interrupt, dev->udev, pipe,
212 buf, maxp, intr_complete, dev, period);
213 dev_dbg(&intf->dev,
214 "status ep%din, %d bytes period %d\n",
215 usb_pipeendpoint(pipe), maxp, period);
216 }
217 }
218 return 0;
219 }
220
221 /* Passes this packet up the stack, updating its accounting.
222 * Some link protocols batch packets, so their rx_fixup paths
223 * can return clones as well as just modify the original skb.
224 */
usbnet_skb_return(struct usbnet * dev,struct sk_buff * skb)225 void usbnet_skb_return (struct usbnet *dev, struct sk_buff *skb)
226 {
227 int status;
228
229 if (test_bit(EVENT_RX_PAUSED, &dev->flags)) {
230 skb_queue_tail(&dev->rxq_pause, skb);
231 return;
232 }
233
234 skb->protocol = eth_type_trans (skb, dev->net);
235 dev->net->stats.rx_packets++;
236 dev->net->stats.rx_bytes += skb->len;
237
238 netif_dbg(dev, rx_status, dev->net, "< rx, len %zu, type 0x%x\n",
239 skb->len + sizeof (struct ethhdr), skb->protocol);
240 memset (skb->cb, 0, sizeof (struct skb_data));
241
242 if (skb_defer_rx_timestamp(skb))
243 return;
244
245 status = netif_rx (skb);
246 if (status != NET_RX_SUCCESS)
247 netif_dbg(dev, rx_err, dev->net,
248 "netif_rx status %d\n", status);
249 }
250 EXPORT_SYMBOL_GPL(usbnet_skb_return);
251
252
253 /*-------------------------------------------------------------------------
254 *
255 * Network Device Driver (peer link to "Host Device", from USB host)
256 *
257 *-------------------------------------------------------------------------*/
258
usbnet_change_mtu(struct net_device * net,int new_mtu)259 int usbnet_change_mtu (struct net_device *net, int new_mtu)
260 {
261 struct usbnet *dev = netdev_priv(net);
262 int ll_mtu = new_mtu + net->hard_header_len;
263 int old_hard_mtu = dev->hard_mtu;
264 int old_rx_urb_size = dev->rx_urb_size;
265
266 if (new_mtu <= 0)
267 return -EINVAL;
268 // no second zero-length packet read wanted after mtu-sized packets
269 if ((ll_mtu % dev->maxpacket) == 0)
270 return -EDOM;
271 net->mtu = new_mtu;
272
273 dev->hard_mtu = net->mtu + net->hard_header_len;
274 if (dev->rx_urb_size == old_hard_mtu) {
275 dev->rx_urb_size = dev->hard_mtu;
276 if (dev->rx_urb_size > old_rx_urb_size)
277 usbnet_unlink_rx_urbs(dev);
278 }
279
280 return 0;
281 }
282 EXPORT_SYMBOL_GPL(usbnet_change_mtu);
283
284 /*-------------------------------------------------------------------------*/
285
286 /* some LK 2.4 HCDs oopsed if we freed or resubmitted urbs from
287 * completion callbacks. 2.5 should have fixed those bugs...
288 */
289
defer_bh(struct usbnet * dev,struct sk_buff * skb,struct sk_buff_head * list)290 static void defer_bh(struct usbnet *dev, struct sk_buff *skb, struct sk_buff_head *list)
291 {
292 unsigned long flags;
293
294 spin_lock_irqsave(&list->lock, flags);
295 __skb_unlink(skb, list);
296 spin_unlock(&list->lock);
297 spin_lock(&dev->done.lock);
298 __skb_queue_tail(&dev->done, skb);
299 if (dev->done.qlen == 1)
300 tasklet_schedule(&dev->bh);
301 spin_unlock_irqrestore(&dev->done.lock, flags);
302 }
303
304 /* some work can't be done in tasklets, so we use keventd
305 *
306 * NOTE: annoying asymmetry: if it's active, schedule_work() fails,
307 * but tasklet_schedule() doesn't. hope the failure is rare.
308 */
usbnet_defer_kevent(struct usbnet * dev,int work)309 void usbnet_defer_kevent (struct usbnet *dev, int work)
310 {
311 set_bit (work, &dev->flags);
312 if (!schedule_work (&dev->kevent))
313 netdev_err(dev->net, "kevent %d may have been dropped\n", work);
314 else
315 netdev_dbg(dev->net, "kevent %d scheduled\n", work);
316 }
317 EXPORT_SYMBOL_GPL(usbnet_defer_kevent);
318
319 /*-------------------------------------------------------------------------*/
320
321 static void rx_complete (struct urb *urb);
322
rx_submit(struct usbnet * dev,struct urb * urb,gfp_t flags)323 static int rx_submit (struct usbnet *dev, struct urb *urb, gfp_t flags)
324 {
325 struct sk_buff *skb;
326 struct skb_data *entry;
327 int retval = 0;
328 unsigned long lockflags;
329 size_t size = dev->rx_urb_size;
330
331 skb = __netdev_alloc_skb_ip_align(dev->net, size, flags);
332 if (!skb) {
333 netif_dbg(dev, rx_err, dev->net, "no rx skb\n");
334 usbnet_defer_kevent (dev, EVENT_RX_MEMORY);
335 usb_free_urb (urb);
336 return -ENOMEM;
337 }
338
339 entry = (struct skb_data *) skb->cb;
340 entry->urb = urb;
341 entry->dev = dev;
342 entry->state = rx_start;
343 entry->length = 0;
344
345 usb_fill_bulk_urb (urb, dev->udev, dev->in,
346 skb->data, size, rx_complete, skb);
347
348 spin_lock_irqsave (&dev->rxq.lock, lockflags);
349
350 if (netif_running (dev->net) &&
351 netif_device_present (dev->net) &&
352 !test_bit (EVENT_RX_HALT, &dev->flags) &&
353 !test_bit (EVENT_DEV_ASLEEP, &dev->flags)) {
354 switch (retval = usb_submit_urb (urb, GFP_ATOMIC)) {
355 case -EPIPE:
356 usbnet_defer_kevent (dev, EVENT_RX_HALT);
357 break;
358 case -ENOMEM:
359 usbnet_defer_kevent (dev, EVENT_RX_MEMORY);
360 break;
361 case -ENODEV:
362 netif_dbg(dev, ifdown, dev->net, "device gone\n");
363 netif_device_detach (dev->net);
364 break;
365 case -EHOSTUNREACH:
366 retval = -ENOLINK;
367 break;
368 default:
369 netif_dbg(dev, rx_err, dev->net,
370 "rx submit, %d\n", retval);
371 tasklet_schedule (&dev->bh);
372 break;
373 case 0:
374 __skb_queue_tail (&dev->rxq, skb);
375 }
376 } else {
377 netif_dbg(dev, ifdown, dev->net, "rx: stopped\n");
378 retval = -ENOLINK;
379 }
380 spin_unlock_irqrestore (&dev->rxq.lock, lockflags);
381 if (retval) {
382 dev_kfree_skb_any (skb);
383 usb_free_urb (urb);
384 }
385 return retval;
386 }
387
388
389 /*-------------------------------------------------------------------------*/
390
rx_process(struct usbnet * dev,struct sk_buff * skb)391 static inline void rx_process (struct usbnet *dev, struct sk_buff *skb)
392 {
393 if (dev->driver_info->rx_fixup &&
394 !dev->driver_info->rx_fixup (dev, skb)) {
395 /* With RX_ASSEMBLE, rx_fixup() must update counters */
396 if (!(dev->driver_info->flags & FLAG_RX_ASSEMBLE))
397 dev->net->stats.rx_errors++;
398 goto done;
399 }
400 // else network stack removes extra byte if we forced a short packet
401
402 if (skb->len) {
403 /* all data was already cloned from skb inside the driver */
404 if (dev->driver_info->flags & FLAG_MULTI_PACKET)
405 dev_kfree_skb_any(skb);
406 else
407 usbnet_skb_return(dev, skb);
408 return;
409 }
410
411 netif_dbg(dev, rx_err, dev->net, "drop\n");
412 dev->net->stats.rx_errors++;
413 done:
414 skb_queue_tail(&dev->done, skb);
415 }
416
417 /*-------------------------------------------------------------------------*/
418
rx_complete(struct urb * urb)419 static void rx_complete (struct urb *urb)
420 {
421 struct sk_buff *skb = (struct sk_buff *) urb->context;
422 struct skb_data *entry = (struct skb_data *) skb->cb;
423 struct usbnet *dev = entry->dev;
424 int urb_status = urb->status;
425
426 skb_put (skb, urb->actual_length);
427 entry->state = rx_done;
428 entry->urb = NULL;
429
430 switch (urb_status) {
431 /* success */
432 case 0:
433 if (skb->len < dev->net->hard_header_len) {
434 entry->state = rx_cleanup;
435 dev->net->stats.rx_errors++;
436 dev->net->stats.rx_length_errors++;
437 netif_dbg(dev, rx_err, dev->net,
438 "rx length %d\n", skb->len);
439 }
440 break;
441
442 /* stalls need manual reset. this is rare ... except that
443 * when going through USB 2.0 TTs, unplug appears this way.
444 * we avoid the highspeed version of the ETIMEDOUT/EILSEQ
445 * storm, recovering as needed.
446 */
447 case -EPIPE:
448 dev->net->stats.rx_errors++;
449 usbnet_defer_kevent (dev, EVENT_RX_HALT);
450 // FALLTHROUGH
451
452 /* software-driven interface shutdown */
453 case -ECONNRESET: /* async unlink */
454 case -ESHUTDOWN: /* hardware gone */
455 netif_dbg(dev, ifdown, dev->net,
456 "rx shutdown, code %d\n", urb_status);
457 goto block;
458
459 /* we get controller i/o faults during khubd disconnect() delays.
460 * throttle down resubmits, to avoid log floods; just temporarily,
461 * so we still recover when the fault isn't a khubd delay.
462 */
463 case -EPROTO:
464 case -ETIME:
465 case -EILSEQ:
466 dev->net->stats.rx_errors++;
467 if (!timer_pending (&dev->delay)) {
468 mod_timer (&dev->delay, jiffies + THROTTLE_JIFFIES);
469 netif_dbg(dev, link, dev->net,
470 "rx throttle %d\n", urb_status);
471 }
472 block:
473 entry->state = rx_cleanup;
474 entry->urb = urb;
475 urb = NULL;
476 break;
477
478 /* data overrun ... flush fifo? */
479 case -EOVERFLOW:
480 dev->net->stats.rx_over_errors++;
481 // FALLTHROUGH
482
483 default:
484 entry->state = rx_cleanup;
485 dev->net->stats.rx_errors++;
486 netif_dbg(dev, rx_err, dev->net, "rx status %d\n", urb_status);
487 break;
488 }
489
490 defer_bh(dev, skb, &dev->rxq);
491
492 if (urb) {
493 if (netif_running (dev->net) &&
494 !test_bit (EVENT_RX_HALT, &dev->flags)) {
495 rx_submit (dev, urb, GFP_ATOMIC);
496 return;
497 }
498 usb_free_urb (urb);
499 }
500 netif_dbg(dev, rx_err, dev->net, "no read resubmitted\n");
501 }
502
intr_complete(struct urb * urb)503 static void intr_complete (struct urb *urb)
504 {
505 struct usbnet *dev = urb->context;
506 int status = urb->status;
507
508 switch (status) {
509 /* success */
510 case 0:
511 dev->driver_info->status(dev, urb);
512 break;
513
514 /* software-driven interface shutdown */
515 case -ENOENT: /* urb killed */
516 case -ESHUTDOWN: /* hardware gone */
517 netif_dbg(dev, ifdown, dev->net,
518 "intr shutdown, code %d\n", status);
519 return;
520
521 /* NOTE: not throttling like RX/TX, since this endpoint
522 * already polls infrequently
523 */
524 default:
525 netdev_dbg(dev->net, "intr status %d\n", status);
526 break;
527 }
528
529 if (!netif_running (dev->net))
530 return;
531
532 memset(urb->transfer_buffer, 0, urb->transfer_buffer_length);
533 status = usb_submit_urb (urb, GFP_ATOMIC);
534 if (status != 0)
535 netif_err(dev, timer, dev->net,
536 "intr resubmit --> %d\n", status);
537 }
538
539 /*-------------------------------------------------------------------------*/
usbnet_pause_rx(struct usbnet * dev)540 void usbnet_pause_rx(struct usbnet *dev)
541 {
542 set_bit(EVENT_RX_PAUSED, &dev->flags);
543
544 netif_dbg(dev, rx_status, dev->net, "paused rx queue enabled\n");
545 }
546 EXPORT_SYMBOL_GPL(usbnet_pause_rx);
547
usbnet_resume_rx(struct usbnet * dev)548 void usbnet_resume_rx(struct usbnet *dev)
549 {
550 struct sk_buff *skb;
551 int num = 0;
552
553 clear_bit(EVENT_RX_PAUSED, &dev->flags);
554
555 while ((skb = skb_dequeue(&dev->rxq_pause)) != NULL) {
556 usbnet_skb_return(dev, skb);
557 num++;
558 }
559
560 tasklet_schedule(&dev->bh);
561
562 netif_dbg(dev, rx_status, dev->net,
563 "paused rx queue disabled, %d skbs requeued\n", num);
564 }
565 EXPORT_SYMBOL_GPL(usbnet_resume_rx);
566
usbnet_purge_paused_rxq(struct usbnet * dev)567 void usbnet_purge_paused_rxq(struct usbnet *dev)
568 {
569 skb_queue_purge(&dev->rxq_pause);
570 }
571 EXPORT_SYMBOL_GPL(usbnet_purge_paused_rxq);
572
573 /*-------------------------------------------------------------------------*/
574
575 // unlink pending rx/tx; completion handlers do all other cleanup
576
unlink_urbs(struct usbnet * dev,struct sk_buff_head * q)577 static int unlink_urbs (struct usbnet *dev, struct sk_buff_head *q)
578 {
579 unsigned long flags;
580 struct sk_buff *skb, *skbnext;
581 int count = 0;
582
583 spin_lock_irqsave (&q->lock, flags);
584 skb_queue_walk_safe(q, skb, skbnext) {
585 struct skb_data *entry;
586 struct urb *urb;
587 int retval;
588
589 entry = (struct skb_data *) skb->cb;
590 urb = entry->urb;
591
592 spin_unlock_irqrestore(&q->lock, flags);
593 // during some PM-driven resume scenarios,
594 // these (async) unlinks complete immediately
595 retval = usb_unlink_urb (urb);
596 if (retval != -EINPROGRESS && retval != 0)
597 netdev_dbg(dev->net, "unlink urb err, %d\n", retval);
598 else
599 count++;
600 spin_lock_irqsave(&q->lock, flags);
601 }
602 spin_unlock_irqrestore (&q->lock, flags);
603 return count;
604 }
605
606 // Flush all pending rx urbs
607 // minidrivers may need to do this when the MTU changes
608
usbnet_unlink_rx_urbs(struct usbnet * dev)609 void usbnet_unlink_rx_urbs(struct usbnet *dev)
610 {
611 if (netif_running(dev->net)) {
612 (void) unlink_urbs (dev, &dev->rxq);
613 tasklet_schedule(&dev->bh);
614 }
615 }
616 EXPORT_SYMBOL_GPL(usbnet_unlink_rx_urbs);
617
618 /*-------------------------------------------------------------------------*/
619
620 // precondition: never called in_interrupt
usbnet_terminate_urbs(struct usbnet * dev)621 static void usbnet_terminate_urbs(struct usbnet *dev)
622 {
623 DECLARE_WAIT_QUEUE_HEAD_ONSTACK(unlink_wakeup);
624 DECLARE_WAITQUEUE(wait, current);
625 int temp;
626
627 /* ensure there are no more active urbs */
628 add_wait_queue(&unlink_wakeup, &wait);
629 set_current_state(TASK_UNINTERRUPTIBLE);
630 dev->wait = &unlink_wakeup;
631 temp = unlink_urbs(dev, &dev->txq) +
632 unlink_urbs(dev, &dev->rxq);
633
634 /* maybe wait for deletions to finish. */
635 while (!skb_queue_empty(&dev->rxq)
636 && !skb_queue_empty(&dev->txq)
637 && !skb_queue_empty(&dev->done)) {
638 schedule_timeout(msecs_to_jiffies(UNLINK_TIMEOUT_MS));
639 set_current_state(TASK_UNINTERRUPTIBLE);
640 netif_dbg(dev, ifdown, dev->net,
641 "waited for %d urb completions\n", temp);
642 }
643 set_current_state(TASK_RUNNING);
644 dev->wait = NULL;
645 remove_wait_queue(&unlink_wakeup, &wait);
646 }
647
usbnet_stop(struct net_device * net)648 int usbnet_stop (struct net_device *net)
649 {
650 struct usbnet *dev = netdev_priv(net);
651 struct driver_info *info = dev->driver_info;
652 int retval;
653
654 clear_bit(EVENT_DEV_OPEN, &dev->flags);
655 netif_stop_queue (net);
656
657 netif_info(dev, ifdown, dev->net,
658 "stop stats: rx/tx %lu/%lu, errs %lu/%lu\n",
659 net->stats.rx_packets, net->stats.tx_packets,
660 net->stats.rx_errors, net->stats.tx_errors);
661
662 /* allow minidriver to stop correctly (wireless devices to turn off
663 * radio etc) */
664 if (info->stop) {
665 retval = info->stop(dev);
666 if (retval < 0)
667 netif_info(dev, ifdown, dev->net,
668 "stop fail (%d) usbnet usb-%s-%s, %s\n",
669 retval,
670 dev->udev->bus->bus_name, dev->udev->devpath,
671 info->description);
672 }
673
674 if (!(info->flags & FLAG_AVOID_UNLINK_URBS))
675 usbnet_terminate_urbs(dev);
676
677 usb_kill_urb(dev->interrupt);
678
679 usbnet_purge_paused_rxq(dev);
680
681 /* deferred work (task, timer, softirq) must also stop.
682 * can't flush_scheduled_work() until we drop rtnl (later),
683 * else workers could deadlock; so make workers a NOP.
684 */
685 dev->flags = 0;
686 del_timer_sync (&dev->delay);
687 tasklet_kill (&dev->bh);
688 if (info->manage_power)
689 info->manage_power(dev, 0);
690 else
691 usb_autopm_put_interface(dev->intf);
692
693 return 0;
694 }
695 EXPORT_SYMBOL_GPL(usbnet_stop);
696
697 /*-------------------------------------------------------------------------*/
698
699 // posts reads, and enables write queuing
700
701 // precondition: never called in_interrupt
702
usbnet_open(struct net_device * net)703 int usbnet_open (struct net_device *net)
704 {
705 struct usbnet *dev = netdev_priv(net);
706 int retval;
707 struct driver_info *info = dev->driver_info;
708
709 if ((retval = usb_autopm_get_interface(dev->intf)) < 0) {
710 netif_info(dev, ifup, dev->net,
711 "resumption fail (%d) usbnet usb-%s-%s, %s\n",
712 retval,
713 dev->udev->bus->bus_name,
714 dev->udev->devpath,
715 info->description);
716 goto done_nopm;
717 }
718
719 // put into "known safe" state
720 if (info->reset && (retval = info->reset (dev)) < 0) {
721 netif_info(dev, ifup, dev->net,
722 "open reset fail (%d) usbnet usb-%s-%s, %s\n",
723 retval,
724 dev->udev->bus->bus_name,
725 dev->udev->devpath,
726 info->description);
727 goto done;
728 }
729
730 // insist peer be connected
731 if (info->check_connect && (retval = info->check_connect (dev)) < 0) {
732 netif_dbg(dev, ifup, dev->net, "can't open; %d\n", retval);
733 goto done;
734 }
735
736 /* start any status interrupt transfer */
737 if (dev->interrupt) {
738 retval = usb_submit_urb (dev->interrupt, GFP_KERNEL);
739 if (retval < 0) {
740 netif_err(dev, ifup, dev->net,
741 "intr submit %d\n", retval);
742 goto done;
743 }
744 }
745
746 set_bit(EVENT_DEV_OPEN, &dev->flags);
747 netif_start_queue (net);
748 netif_info(dev, ifup, dev->net,
749 "open: enable queueing (rx %d, tx %d) mtu %d %s framing\n",
750 (int)RX_QLEN(dev), (int)TX_QLEN(dev),
751 dev->net->mtu,
752 (dev->driver_info->flags & FLAG_FRAMING_NC) ? "NetChip" :
753 (dev->driver_info->flags & FLAG_FRAMING_GL) ? "GeneSys" :
754 (dev->driver_info->flags & FLAG_FRAMING_Z) ? "Zaurus" :
755 (dev->driver_info->flags & FLAG_FRAMING_RN) ? "RNDIS" :
756 (dev->driver_info->flags & FLAG_FRAMING_AX) ? "ASIX" :
757 "simple");
758
759 // delay posting reads until we're fully open
760 tasklet_schedule (&dev->bh);
761 if (info->manage_power) {
762 retval = info->manage_power(dev, 1);
763 if (retval < 0)
764 goto done;
765 usb_autopm_put_interface(dev->intf);
766 }
767 return retval;
768
769 done:
770 usb_autopm_put_interface(dev->intf);
771 done_nopm:
772 return retval;
773 }
774 EXPORT_SYMBOL_GPL(usbnet_open);
775
776 /*-------------------------------------------------------------------------*/
777
778 /* ethtool methods; minidrivers may need to add some more, but
779 * they'll probably want to use this base set.
780 */
781
usbnet_get_settings(struct net_device * net,struct ethtool_cmd * cmd)782 int usbnet_get_settings (struct net_device *net, struct ethtool_cmd *cmd)
783 {
784 struct usbnet *dev = netdev_priv(net);
785
786 if (!dev->mii.mdio_read)
787 return -EOPNOTSUPP;
788
789 return mii_ethtool_gset(&dev->mii, cmd);
790 }
791 EXPORT_SYMBOL_GPL(usbnet_get_settings);
792
usbnet_set_settings(struct net_device * net,struct ethtool_cmd * cmd)793 int usbnet_set_settings (struct net_device *net, struct ethtool_cmd *cmd)
794 {
795 struct usbnet *dev = netdev_priv(net);
796 int retval;
797
798 if (!dev->mii.mdio_write)
799 return -EOPNOTSUPP;
800
801 retval = mii_ethtool_sset(&dev->mii, cmd);
802
803 /* link speed/duplex might have changed */
804 if (dev->driver_info->link_reset)
805 dev->driver_info->link_reset(dev);
806
807 return retval;
808
809 }
810 EXPORT_SYMBOL_GPL(usbnet_set_settings);
811
usbnet_get_link(struct net_device * net)812 u32 usbnet_get_link (struct net_device *net)
813 {
814 struct usbnet *dev = netdev_priv(net);
815
816 /* If a check_connect is defined, return its result */
817 if (dev->driver_info->check_connect)
818 return dev->driver_info->check_connect (dev) == 0;
819
820 /* if the device has mii operations, use those */
821 if (dev->mii.mdio_read)
822 return mii_link_ok(&dev->mii);
823
824 /* Otherwise, dtrt for drivers calling netif_carrier_{on,off} */
825 return ethtool_op_get_link(net);
826 }
827 EXPORT_SYMBOL_GPL(usbnet_get_link);
828
usbnet_nway_reset(struct net_device * net)829 int usbnet_nway_reset(struct net_device *net)
830 {
831 struct usbnet *dev = netdev_priv(net);
832
833 if (!dev->mii.mdio_write)
834 return -EOPNOTSUPP;
835
836 return mii_nway_restart(&dev->mii);
837 }
838 EXPORT_SYMBOL_GPL(usbnet_nway_reset);
839
usbnet_get_drvinfo(struct net_device * net,struct ethtool_drvinfo * info)840 void usbnet_get_drvinfo (struct net_device *net, struct ethtool_drvinfo *info)
841 {
842 struct usbnet *dev = netdev_priv(net);
843
844 strncpy (info->driver, dev->driver_name, sizeof info->driver);
845 strncpy (info->version, DRIVER_VERSION, sizeof info->version);
846 strncpy (info->fw_version, dev->driver_info->description,
847 sizeof info->fw_version);
848 usb_make_path (dev->udev, info->bus_info, sizeof info->bus_info);
849 }
850 EXPORT_SYMBOL_GPL(usbnet_get_drvinfo);
851
usbnet_get_msglevel(struct net_device * net)852 u32 usbnet_get_msglevel (struct net_device *net)
853 {
854 struct usbnet *dev = netdev_priv(net);
855
856 return dev->msg_enable;
857 }
858 EXPORT_SYMBOL_GPL(usbnet_get_msglevel);
859
usbnet_set_msglevel(struct net_device * net,u32 level)860 void usbnet_set_msglevel (struct net_device *net, u32 level)
861 {
862 struct usbnet *dev = netdev_priv(net);
863
864 dev->msg_enable = level;
865 }
866 EXPORT_SYMBOL_GPL(usbnet_set_msglevel);
867
868 /* drivers may override default ethtool_ops in their bind() routine */
869 static const struct ethtool_ops usbnet_ethtool_ops = {
870 .get_settings = usbnet_get_settings,
871 .set_settings = usbnet_set_settings,
872 .get_link = usbnet_get_link,
873 .nway_reset = usbnet_nway_reset,
874 .get_drvinfo = usbnet_get_drvinfo,
875 .get_msglevel = usbnet_get_msglevel,
876 .set_msglevel = usbnet_set_msglevel,
877 };
878
879 /*-------------------------------------------------------------------------*/
880
881 /* work that cannot be done in interrupt context uses keventd.
882 *
883 * NOTE: with 2.5 we could do more of this using completion callbacks,
884 * especially now that control transfers can be queued.
885 */
886 static void
kevent(struct work_struct * work)887 kevent (struct work_struct *work)
888 {
889 struct usbnet *dev =
890 container_of(work, struct usbnet, kevent);
891 int status;
892
893 /* usb_clear_halt() needs a thread context */
894 if (test_bit (EVENT_TX_HALT, &dev->flags)) {
895 unlink_urbs (dev, &dev->txq);
896 status = usb_autopm_get_interface(dev->intf);
897 if (status < 0)
898 goto fail_pipe;
899 status = usb_clear_halt (dev->udev, dev->out);
900 usb_autopm_put_interface(dev->intf);
901 if (status < 0 &&
902 status != -EPIPE &&
903 status != -ESHUTDOWN) {
904 if (netif_msg_tx_err (dev))
905 fail_pipe:
906 netdev_err(dev->net, "can't clear tx halt, status %d\n",
907 status);
908 } else {
909 clear_bit (EVENT_TX_HALT, &dev->flags);
910 if (status != -ESHUTDOWN)
911 netif_wake_queue (dev->net);
912 }
913 }
914 if (test_bit (EVENT_RX_HALT, &dev->flags)) {
915 unlink_urbs (dev, &dev->rxq);
916 status = usb_autopm_get_interface(dev->intf);
917 if (status < 0)
918 goto fail_halt;
919 status = usb_clear_halt (dev->udev, dev->in);
920 usb_autopm_put_interface(dev->intf);
921 if (status < 0 &&
922 status != -EPIPE &&
923 status != -ESHUTDOWN) {
924 if (netif_msg_rx_err (dev))
925 fail_halt:
926 netdev_err(dev->net, "can't clear rx halt, status %d\n",
927 status);
928 } else {
929 clear_bit (EVENT_RX_HALT, &dev->flags);
930 tasklet_schedule (&dev->bh);
931 }
932 }
933
934 /* tasklet could resubmit itself forever if memory is tight */
935 if (test_bit (EVENT_RX_MEMORY, &dev->flags)) {
936 struct urb *urb = NULL;
937 int resched = 1;
938
939 if (netif_running (dev->net))
940 urb = usb_alloc_urb (0, GFP_KERNEL);
941 else
942 clear_bit (EVENT_RX_MEMORY, &dev->flags);
943 if (urb != NULL) {
944 clear_bit (EVENT_RX_MEMORY, &dev->flags);
945 status = usb_autopm_get_interface(dev->intf);
946 if (status < 0) {
947 usb_free_urb(urb);
948 goto fail_lowmem;
949 }
950 if (rx_submit (dev, urb, GFP_KERNEL) == -ENOLINK)
951 resched = 0;
952 usb_autopm_put_interface(dev->intf);
953 fail_lowmem:
954 if (resched)
955 tasklet_schedule (&dev->bh);
956 }
957 }
958
959 if (test_bit (EVENT_LINK_RESET, &dev->flags)) {
960 struct driver_info *info = dev->driver_info;
961 int retval = 0;
962
963 clear_bit (EVENT_LINK_RESET, &dev->flags);
964 status = usb_autopm_get_interface(dev->intf);
965 if (status < 0)
966 goto skip_reset;
967 if(info->link_reset && (retval = info->link_reset(dev)) < 0) {
968 usb_autopm_put_interface(dev->intf);
969 skip_reset:
970 netdev_info(dev->net, "link reset failed (%d) usbnet usb-%s-%s, %s\n",
971 retval,
972 dev->udev->bus->bus_name,
973 dev->udev->devpath,
974 info->description);
975 } else {
976 usb_autopm_put_interface(dev->intf);
977 }
978 }
979
980 if (dev->flags)
981 netdev_dbg(dev->net, "kevent done, flags = 0x%lx\n", dev->flags);
982 }
983
984 /*-------------------------------------------------------------------------*/
985
tx_complete(struct urb * urb)986 static void tx_complete (struct urb *urb)
987 {
988 struct sk_buff *skb = (struct sk_buff *) urb->context;
989 struct skb_data *entry = (struct skb_data *) skb->cb;
990 struct usbnet *dev = entry->dev;
991
992 if (urb->status == 0) {
993 if (!(dev->driver_info->flags & FLAG_MULTI_PACKET))
994 dev->net->stats.tx_packets++;
995 dev->net->stats.tx_bytes += entry->length;
996 } else {
997 dev->net->stats.tx_errors++;
998
999 switch (urb->status) {
1000 case -EPIPE:
1001 usbnet_defer_kevent (dev, EVENT_TX_HALT);
1002 break;
1003
1004 /* software-driven interface shutdown */
1005 case -ECONNRESET: // async unlink
1006 case -ESHUTDOWN: // hardware gone
1007 break;
1008
1009 // like rx, tx gets controller i/o faults during khubd delays
1010 // and so it uses the same throttling mechanism.
1011 case -EPROTO:
1012 case -ETIME:
1013 case -EILSEQ:
1014 usb_mark_last_busy(dev->udev);
1015 if (!timer_pending (&dev->delay)) {
1016 mod_timer (&dev->delay,
1017 jiffies + THROTTLE_JIFFIES);
1018 netif_dbg(dev, link, dev->net,
1019 "tx throttle %d\n", urb->status);
1020 }
1021 netif_stop_queue (dev->net);
1022 break;
1023 default:
1024 netif_dbg(dev, tx_err, dev->net,
1025 "tx err %d\n", entry->urb->status);
1026 break;
1027 }
1028 }
1029
1030 usb_autopm_put_interface_async(dev->intf);
1031 urb->dev = NULL;
1032 entry->state = tx_done;
1033 defer_bh(dev, skb, &dev->txq);
1034 }
1035
1036 /*-------------------------------------------------------------------------*/
1037
usbnet_tx_timeout(struct net_device * net)1038 void usbnet_tx_timeout (struct net_device *net)
1039 {
1040 struct usbnet *dev = netdev_priv(net);
1041
1042 unlink_urbs (dev, &dev->txq);
1043 tasklet_schedule (&dev->bh);
1044
1045 // FIXME: device recovery -- reset?
1046 }
1047 EXPORT_SYMBOL_GPL(usbnet_tx_timeout);
1048
1049 /*-------------------------------------------------------------------------*/
1050
usbnet_start_xmit(struct sk_buff * skb,struct net_device * net)1051 netdev_tx_t usbnet_start_xmit (struct sk_buff *skb,
1052 struct net_device *net)
1053 {
1054 struct usbnet *dev = netdev_priv(net);
1055 int length;
1056 struct urb *urb = NULL;
1057 struct skb_data *entry;
1058 struct driver_info *info = dev->driver_info;
1059 unsigned long flags;
1060 int retval;
1061
1062 if (skb)
1063 skb_tx_timestamp(skb);
1064
1065 // some devices want funky USB-level framing, for
1066 // win32 driver (usually) and/or hardware quirks
1067 if (info->tx_fixup) {
1068 skb = info->tx_fixup (dev, skb, GFP_ATOMIC);
1069 if (!skb) {
1070 if (netif_msg_tx_err(dev)) {
1071 netif_dbg(dev, tx_err, dev->net, "can't tx_fixup skb\n");
1072 goto drop;
1073 } else {
1074 /* cdc_ncm collected packet; waits for more */
1075 goto not_drop;
1076 }
1077 }
1078 }
1079 length = skb->len;
1080
1081 if (!(urb = usb_alloc_urb (0, GFP_ATOMIC))) {
1082 netif_dbg(dev, tx_err, dev->net, "no urb\n");
1083 goto drop;
1084 }
1085
1086 entry = (struct skb_data *) skb->cb;
1087 entry->urb = urb;
1088 entry->dev = dev;
1089 entry->state = tx_start;
1090 entry->length = length;
1091
1092 usb_fill_bulk_urb (urb, dev->udev, dev->out,
1093 skb->data, skb->len, tx_complete, skb);
1094
1095 /* don't assume the hardware handles USB_ZERO_PACKET
1096 * NOTE: strictly conforming cdc-ether devices should expect
1097 * the ZLP here, but ignore the one-byte packet.
1098 * NOTE2: CDC NCM specification is different from CDC ECM when
1099 * handling ZLP/short packets, so cdc_ncm driver will make short
1100 * packet itself if needed.
1101 */
1102 if (length % dev->maxpacket == 0) {
1103 if (!(info->flags & FLAG_SEND_ZLP)) {
1104 if (!(info->flags & FLAG_MULTI_PACKET)) {
1105 urb->transfer_buffer_length++;
1106 if (skb_tailroom(skb)) {
1107 skb->data[skb->len] = 0;
1108 __skb_put(skb, 1);
1109 }
1110 }
1111 } else
1112 urb->transfer_flags |= URB_ZERO_PACKET;
1113 }
1114
1115 spin_lock_irqsave(&dev->txq.lock, flags);
1116 retval = usb_autopm_get_interface_async(dev->intf);
1117 if (retval < 0) {
1118 spin_unlock_irqrestore(&dev->txq.lock, flags);
1119 goto drop;
1120 }
1121
1122 #ifdef CONFIG_PM
1123 /* if this triggers the device is still a sleep */
1124 if (test_bit(EVENT_DEV_ASLEEP, &dev->flags)) {
1125 /* transmission will be done in resume */
1126 usb_anchor_urb(urb, &dev->deferred);
1127 /* no use to process more packets */
1128 netif_stop_queue(net);
1129 spin_unlock_irqrestore(&dev->txq.lock, flags);
1130 netdev_dbg(dev->net, "Delaying transmission for resumption\n");
1131 goto deferred;
1132 }
1133 #endif
1134
1135 switch ((retval = usb_submit_urb (urb, GFP_ATOMIC))) {
1136 case -EPIPE:
1137 netif_stop_queue (net);
1138 usbnet_defer_kevent (dev, EVENT_TX_HALT);
1139 usb_autopm_put_interface_async(dev->intf);
1140 break;
1141 default:
1142 usb_autopm_put_interface_async(dev->intf);
1143 netif_dbg(dev, tx_err, dev->net,
1144 "tx: submit urb err %d\n", retval);
1145 break;
1146 case 0:
1147 net->trans_start = jiffies;
1148 __skb_queue_tail (&dev->txq, skb);
1149 if (dev->txq.qlen >= TX_QLEN (dev))
1150 netif_stop_queue (net);
1151 }
1152 spin_unlock_irqrestore (&dev->txq.lock, flags);
1153
1154 if (retval) {
1155 netif_dbg(dev, tx_err, dev->net, "drop, code %d\n", retval);
1156 drop:
1157 dev->net->stats.tx_dropped++;
1158 not_drop:
1159 if (skb)
1160 dev_kfree_skb_any (skb);
1161 usb_free_urb (urb);
1162 } else
1163 netif_dbg(dev, tx_queued, dev->net,
1164 "> tx, len %d, type 0x%x\n", length, skb->protocol);
1165 #ifdef CONFIG_PM
1166 deferred:
1167 #endif
1168 return NETDEV_TX_OK;
1169 }
1170 EXPORT_SYMBOL_GPL(usbnet_start_xmit);
1171
1172 /*-------------------------------------------------------------------------*/
1173
1174 // tasklet (work deferred from completions, in_irq) or timer
1175
usbnet_bh(unsigned long param)1176 static void usbnet_bh (unsigned long param)
1177 {
1178 struct usbnet *dev = (struct usbnet *) param;
1179 struct sk_buff *skb;
1180 struct skb_data *entry;
1181
1182 while ((skb = skb_dequeue (&dev->done))) {
1183 entry = (struct skb_data *) skb->cb;
1184 switch (entry->state) {
1185 case rx_done:
1186 entry->state = rx_cleanup;
1187 rx_process (dev, skb);
1188 continue;
1189 case tx_done:
1190 case rx_cleanup:
1191 usb_free_urb (entry->urb);
1192 dev_kfree_skb (skb);
1193 continue;
1194 default:
1195 netdev_dbg(dev->net, "bogus skb state %d\n", entry->state);
1196 }
1197 }
1198
1199 // waiting for all pending urbs to complete?
1200 if (dev->wait) {
1201 if ((dev->txq.qlen + dev->rxq.qlen + dev->done.qlen) == 0) {
1202 wake_up (dev->wait);
1203 }
1204
1205 // or are we maybe short a few urbs?
1206 } else if (netif_running (dev->net) &&
1207 netif_device_present (dev->net) &&
1208 !timer_pending (&dev->delay) &&
1209 !test_bit (EVENT_RX_HALT, &dev->flags)) {
1210 int temp = dev->rxq.qlen;
1211 int qlen = RX_QLEN (dev);
1212
1213 if (temp < qlen) {
1214 struct urb *urb;
1215 int i;
1216
1217 // don't refill the queue all at once
1218 for (i = 0; i < 10 && dev->rxq.qlen < qlen; i++) {
1219 urb = usb_alloc_urb (0, GFP_ATOMIC);
1220 if (urb != NULL) {
1221 if (rx_submit (dev, urb, GFP_ATOMIC) ==
1222 -ENOLINK)
1223 return;
1224 }
1225 }
1226 if (temp != dev->rxq.qlen)
1227 netif_dbg(dev, link, dev->net,
1228 "rxqlen %d --> %d\n",
1229 temp, dev->rxq.qlen);
1230 if (dev->rxq.qlen < qlen)
1231 tasklet_schedule (&dev->bh);
1232 }
1233 if (dev->txq.qlen < TX_QLEN (dev))
1234 netif_wake_queue (dev->net);
1235 }
1236 }
1237
1238
1239 /*-------------------------------------------------------------------------
1240 *
1241 * USB Device Driver support
1242 *
1243 *-------------------------------------------------------------------------*/
1244
1245 // precondition: never called in_interrupt
1246
usbnet_disconnect(struct usb_interface * intf)1247 void usbnet_disconnect (struct usb_interface *intf)
1248 {
1249 struct usbnet *dev;
1250 struct usb_device *xdev;
1251 struct net_device *net;
1252
1253 dev = usb_get_intfdata(intf);
1254 usb_set_intfdata(intf, NULL);
1255 if (!dev)
1256 return;
1257
1258 xdev = interface_to_usbdev (intf);
1259
1260 netif_info(dev, probe, dev->net, "unregister '%s' usb-%s-%s, %s\n",
1261 intf->dev.driver->name,
1262 xdev->bus->bus_name, xdev->devpath,
1263 dev->driver_info->description);
1264
1265 net = dev->net;
1266 unregister_netdev (net);
1267
1268 cancel_work_sync(&dev->kevent);
1269
1270 if (dev->driver_info->unbind)
1271 dev->driver_info->unbind (dev, intf);
1272
1273 usb_kill_urb(dev->interrupt);
1274 usb_free_urb(dev->interrupt);
1275
1276 free_netdev(net);
1277 usb_put_dev (xdev);
1278 }
1279 EXPORT_SYMBOL_GPL(usbnet_disconnect);
1280
1281 static const struct net_device_ops usbnet_netdev_ops = {
1282 .ndo_open = usbnet_open,
1283 .ndo_stop = usbnet_stop,
1284 .ndo_start_xmit = usbnet_start_xmit,
1285 .ndo_tx_timeout = usbnet_tx_timeout,
1286 .ndo_change_mtu = usbnet_change_mtu,
1287 .ndo_set_mac_address = eth_mac_addr,
1288 .ndo_validate_addr = eth_validate_addr,
1289 };
1290
1291 /*-------------------------------------------------------------------------*/
1292
1293 // precondition: never called in_interrupt
1294
1295 static struct device_type wlan_type = {
1296 .name = "wlan",
1297 };
1298
1299 static struct device_type wwan_type = {
1300 .name = "wwan",
1301 };
1302
1303 int
usbnet_probe(struct usb_interface * udev,const struct usb_device_id * prod)1304 usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
1305 {
1306 struct usbnet *dev;
1307 struct net_device *net;
1308 struct usb_host_interface *interface;
1309 struct driver_info *info;
1310 struct usb_device *xdev;
1311 int status;
1312 const char *name;
1313 struct usb_driver *driver = to_usb_driver(udev->dev.driver);
1314
1315 /* usbnet already took usb runtime pm, so have to enable the feature
1316 * for usb interface, otherwise usb_autopm_get_interface may return
1317 * failure if USB_SUSPEND(RUNTIME_PM) is enabled.
1318 */
1319 if (!driver->supports_autosuspend) {
1320 driver->supports_autosuspend = 1;
1321 pm_runtime_enable(&udev->dev);
1322 }
1323
1324 name = udev->dev.driver->name;
1325 info = (struct driver_info *) prod->driver_info;
1326 if (!info) {
1327 dev_dbg (&udev->dev, "blacklisted by %s\n", name);
1328 return -ENODEV;
1329 }
1330 xdev = interface_to_usbdev (udev);
1331 interface = udev->cur_altsetting;
1332
1333 usb_get_dev (xdev);
1334
1335 status = -ENOMEM;
1336
1337 // set up our own records
1338 net = alloc_etherdev(sizeof(*dev));
1339 if (!net) {
1340 dbg ("can't kmalloc dev");
1341 goto out;
1342 }
1343
1344 /* netdev_printk() needs this so do it as early as possible */
1345 SET_NETDEV_DEV(net, &udev->dev);
1346
1347 dev = netdev_priv(net);
1348 dev->udev = xdev;
1349 dev->intf = udev;
1350 dev->driver_info = info;
1351 dev->driver_name = name;
1352 dev->msg_enable = netif_msg_init (msg_level, NETIF_MSG_DRV
1353 | NETIF_MSG_PROBE | NETIF_MSG_LINK);
1354 skb_queue_head_init (&dev->rxq);
1355 skb_queue_head_init (&dev->txq);
1356 skb_queue_head_init (&dev->done);
1357 skb_queue_head_init(&dev->rxq_pause);
1358 dev->bh.func = usbnet_bh;
1359 dev->bh.data = (unsigned long) dev;
1360 INIT_WORK (&dev->kevent, kevent);
1361 init_usb_anchor(&dev->deferred);
1362 dev->delay.function = usbnet_bh;
1363 dev->delay.data = (unsigned long) dev;
1364 init_timer (&dev->delay);
1365 mutex_init (&dev->phy_mutex);
1366
1367 dev->net = net;
1368 strcpy (net->name, "usb%d");
1369 memcpy (net->dev_addr, node_id, sizeof node_id);
1370
1371 /* rx and tx sides can use different message sizes;
1372 * bind() should set rx_urb_size in that case.
1373 */
1374 dev->hard_mtu = net->mtu + net->hard_header_len;
1375 #if 0
1376 // dma_supported() is deeply broken on almost all architectures
1377 // possible with some EHCI controllers
1378 if (dma_supported (&udev->dev, DMA_BIT_MASK(64)))
1379 net->features |= NETIF_F_HIGHDMA;
1380 #endif
1381
1382 net->netdev_ops = &usbnet_netdev_ops;
1383 net->watchdog_timeo = TX_TIMEOUT_JIFFIES;
1384 net->ethtool_ops = &usbnet_ethtool_ops;
1385
1386 // allow device-specific bind/init procedures
1387 // NOTE net->name still not usable ...
1388 if (info->bind) {
1389 status = info->bind (dev, udev);
1390 if (status < 0)
1391 goto out1;
1392
1393 // heuristic: "usb%d" for links we know are two-host,
1394 // else "eth%d" when there's reasonable doubt. userspace
1395 // can rename the link if it knows better.
1396 if ((dev->driver_info->flags & FLAG_ETHER) != 0 &&
1397 ((dev->driver_info->flags & FLAG_POINTTOPOINT) == 0 ||
1398 (net->dev_addr [0] & 0x02) == 0))
1399 strcpy (net->name, "eth%d");
1400 /* WLAN devices should always be named "wlan%d" */
1401 if ((dev->driver_info->flags & FLAG_WLAN) != 0)
1402 strcpy(net->name, "wlan%d");
1403 /* WWAN devices should always be named "wwan%d" */
1404 if ((dev->driver_info->flags & FLAG_WWAN) != 0)
1405 strcpy(net->name, "wwan%d");
1406
1407 /* maybe the remote can't receive an Ethernet MTU */
1408 if (net->mtu > (dev->hard_mtu - net->hard_header_len))
1409 net->mtu = dev->hard_mtu - net->hard_header_len;
1410 } else if (!info->in || !info->out)
1411 status = usbnet_get_endpoints (dev, udev);
1412 else {
1413 dev->in = usb_rcvbulkpipe (xdev, info->in);
1414 dev->out = usb_sndbulkpipe (xdev, info->out);
1415 if (!(info->flags & FLAG_NO_SETINT))
1416 status = usb_set_interface (xdev,
1417 interface->desc.bInterfaceNumber,
1418 interface->desc.bAlternateSetting);
1419 else
1420 status = 0;
1421
1422 }
1423 if (status >= 0 && dev->status)
1424 status = init_status (dev, udev);
1425 if (status < 0)
1426 goto out3;
1427
1428 if (!dev->rx_urb_size)
1429 dev->rx_urb_size = dev->hard_mtu;
1430 dev->maxpacket = usb_maxpacket (dev->udev, dev->out, 1);
1431
1432 if ((dev->driver_info->flags & FLAG_WLAN) != 0)
1433 SET_NETDEV_DEVTYPE(net, &wlan_type);
1434 if ((dev->driver_info->flags & FLAG_WWAN) != 0)
1435 SET_NETDEV_DEVTYPE(net, &wwan_type);
1436
1437 status = register_netdev (net);
1438 if (status)
1439 goto out3;
1440 netif_info(dev, probe, dev->net,
1441 "register '%s' at usb-%s-%s, %s, %pM\n",
1442 udev->dev.driver->name,
1443 xdev->bus->bus_name, xdev->devpath,
1444 dev->driver_info->description,
1445 net->dev_addr);
1446
1447 // ok, it's ready to go.
1448 usb_set_intfdata (udev, dev);
1449
1450 netif_device_attach (net);
1451
1452 if (dev->driver_info->flags & FLAG_LINK_INTR)
1453 netif_carrier_off(net);
1454
1455 return 0;
1456
1457 out3:
1458 if (info->unbind)
1459 info->unbind (dev, udev);
1460 out1:
1461 free_netdev(net);
1462 out:
1463 usb_put_dev(xdev);
1464 return status;
1465 }
1466 EXPORT_SYMBOL_GPL(usbnet_probe);
1467
1468 /*-------------------------------------------------------------------------*/
1469
1470 /*
1471 * suspend the whole driver as soon as the first interface is suspended
1472 * resume only when the last interface is resumed
1473 */
1474
usbnet_suspend(struct usb_interface * intf,pm_message_t message)1475 int usbnet_suspend (struct usb_interface *intf, pm_message_t message)
1476 {
1477 struct usbnet *dev = usb_get_intfdata(intf);
1478
1479 if (!dev->suspend_count++) {
1480 spin_lock_irq(&dev->txq.lock);
1481 /* don't autosuspend while transmitting */
1482 if (dev->txq.qlen && PMSG_IS_AUTO(message)) {
1483 spin_unlock_irq(&dev->txq.lock);
1484 return -EBUSY;
1485 } else {
1486 set_bit(EVENT_DEV_ASLEEP, &dev->flags);
1487 spin_unlock_irq(&dev->txq.lock);
1488 }
1489 /*
1490 * accelerate emptying of the rx and queues, to avoid
1491 * having everything error out.
1492 */
1493 netif_device_detach (dev->net);
1494 usbnet_terminate_urbs(dev);
1495 usb_kill_urb(dev->interrupt);
1496
1497 /*
1498 * reattach so runtime management can use and
1499 * wake the device
1500 */
1501 netif_device_attach (dev->net);
1502 }
1503 return 0;
1504 }
1505 EXPORT_SYMBOL_GPL(usbnet_suspend);
1506
usbnet_resume(struct usb_interface * intf)1507 int usbnet_resume (struct usb_interface *intf)
1508 {
1509 struct usbnet *dev = usb_get_intfdata(intf);
1510 struct sk_buff *skb;
1511 struct urb *res;
1512 int retval;
1513
1514 if (!--dev->suspend_count) {
1515 /* resume interrupt URBs */
1516 if (dev->interrupt && test_bit(EVENT_DEV_OPEN, &dev->flags))
1517 usb_submit_urb(dev->interrupt, GFP_NOIO);
1518
1519 spin_lock_irq(&dev->txq.lock);
1520 while ((res = usb_get_from_anchor(&dev->deferred))) {
1521
1522 skb = (struct sk_buff *)res->context;
1523 retval = usb_submit_urb(res, GFP_ATOMIC);
1524 if (retval < 0) {
1525 dev_kfree_skb_any(skb);
1526 usb_free_urb(res);
1527 usb_autopm_put_interface_async(dev->intf);
1528 } else {
1529 dev->net->trans_start = jiffies;
1530 __skb_queue_tail(&dev->txq, skb);
1531 }
1532 }
1533
1534 smp_mb();
1535 clear_bit(EVENT_DEV_ASLEEP, &dev->flags);
1536 spin_unlock_irq(&dev->txq.lock);
1537
1538 if (test_bit(EVENT_DEV_OPEN, &dev->flags)) {
1539 if (!(dev->txq.qlen >= TX_QLEN(dev)))
1540 netif_start_queue(dev->net);
1541 tasklet_schedule (&dev->bh);
1542 }
1543 }
1544 return 0;
1545 }
1546 EXPORT_SYMBOL_GPL(usbnet_resume);
1547
1548
1549 /*-------------------------------------------------------------------------*/
1550
usbnet_init(void)1551 static int __init usbnet_init(void)
1552 {
1553 /* Compiler should optimize this out. */
1554 BUILD_BUG_ON(
1555 FIELD_SIZEOF(struct sk_buff, cb) < sizeof(struct skb_data));
1556
1557 random_ether_addr(node_id);
1558 return 0;
1559 }
1560 module_init(usbnet_init);
1561
usbnet_exit(void)1562 static void __exit usbnet_exit(void)
1563 {
1564 }
1565 module_exit(usbnet_exit);
1566
1567 MODULE_AUTHOR("David Brownell");
1568 MODULE_DESCRIPTION("USB network driver framework");
1569 MODULE_LICENSE("GPL");
1570