1 /*
2 * tvp5150 - Texas Instruments TVP5150A/AM1 video decoder driver
3 *
4 * Copyright (c) 2005,2006 Mauro Carvalho Chehab (mchehab@infradead.org)
5 * This code is placed under the terms of the GNU General Public License v2
6 */
7
8 #include <linux/i2c.h>
9 #include <linux/slab.h>
10 #include <linux/videodev2.h>
11 #include <linux/delay.h>
12 #include <linux/module.h>
13 #include <media/v4l2-device.h>
14 #include <media/tvp5150.h>
15 #include <media/v4l2-chip-ident.h>
16 #include <media/v4l2-ctrls.h>
17
18 #include "tvp5150_reg.h"
19
20 MODULE_DESCRIPTION("Texas Instruments TVP5150A video decoder driver");
21 MODULE_AUTHOR("Mauro Carvalho Chehab");
22 MODULE_LICENSE("GPL");
23
24
25 static int debug;
26 module_param(debug, int, 0);
27 MODULE_PARM_DESC(debug, "Debug level (0-2)");
28
29 struct tvp5150 {
30 struct v4l2_subdev sd;
31 struct v4l2_ctrl_handler hdl;
32
33 v4l2_std_id norm; /* Current set standard */
34 u32 input;
35 u32 output;
36 int enable;
37 };
38
to_tvp5150(struct v4l2_subdev * sd)39 static inline struct tvp5150 *to_tvp5150(struct v4l2_subdev *sd)
40 {
41 return container_of(sd, struct tvp5150, sd);
42 }
43
to_sd(struct v4l2_ctrl * ctrl)44 static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
45 {
46 return &container_of(ctrl->handler, struct tvp5150, hdl)->sd;
47 }
48
tvp5150_read(struct v4l2_subdev * sd,unsigned char addr)49 static int tvp5150_read(struct v4l2_subdev *sd, unsigned char addr)
50 {
51 struct i2c_client *c = v4l2_get_subdevdata(sd);
52 unsigned char buffer[1];
53 int rc;
54
55 buffer[0] = addr;
56 if (1 != (rc = i2c_master_send(c, buffer, 1)))
57 v4l2_dbg(0, debug, sd, "i2c i/o error: rc == %d (should be 1)\n", rc);
58
59 msleep(10);
60
61 if (1 != (rc = i2c_master_recv(c, buffer, 1)))
62 v4l2_dbg(0, debug, sd, "i2c i/o error: rc == %d (should be 1)\n", rc);
63
64 v4l2_dbg(2, debug, sd, "tvp5150: read 0x%02x = 0x%02x\n", addr, buffer[0]);
65
66 return (buffer[0]);
67 }
68
tvp5150_write(struct v4l2_subdev * sd,unsigned char addr,unsigned char value)69 static inline void tvp5150_write(struct v4l2_subdev *sd, unsigned char addr,
70 unsigned char value)
71 {
72 struct i2c_client *c = v4l2_get_subdevdata(sd);
73 unsigned char buffer[2];
74 int rc;
75
76 buffer[0] = addr;
77 buffer[1] = value;
78 v4l2_dbg(2, debug, sd, "tvp5150: writing 0x%02x 0x%02x\n", buffer[0], buffer[1]);
79 if (2 != (rc = i2c_master_send(c, buffer, 2)))
80 v4l2_dbg(0, debug, sd, "i2c i/o error: rc == %d (should be 2)\n", rc);
81 }
82
dump_reg_range(struct v4l2_subdev * sd,char * s,u8 init,const u8 end,int max_line)83 static void dump_reg_range(struct v4l2_subdev *sd, char *s, u8 init,
84 const u8 end, int max_line)
85 {
86 int i = 0;
87
88 while (init != (u8)(end + 1)) {
89 if ((i % max_line) == 0) {
90 if (i > 0)
91 printk("\n");
92 printk("tvp5150: %s reg 0x%02x = ", s, init);
93 }
94 printk("%02x ", tvp5150_read(sd, init));
95
96 init++;
97 i++;
98 }
99 printk("\n");
100 }
101
tvp5150_log_status(struct v4l2_subdev * sd)102 static int tvp5150_log_status(struct v4l2_subdev *sd)
103 {
104 printk("tvp5150: Video input source selection #1 = 0x%02x\n",
105 tvp5150_read(sd, TVP5150_VD_IN_SRC_SEL_1));
106 printk("tvp5150: Analog channel controls = 0x%02x\n",
107 tvp5150_read(sd, TVP5150_ANAL_CHL_CTL));
108 printk("tvp5150: Operation mode controls = 0x%02x\n",
109 tvp5150_read(sd, TVP5150_OP_MODE_CTL));
110 printk("tvp5150: Miscellaneous controls = 0x%02x\n",
111 tvp5150_read(sd, TVP5150_MISC_CTL));
112 printk("tvp5150: Autoswitch mask= 0x%02x\n",
113 tvp5150_read(sd, TVP5150_AUTOSW_MSK));
114 printk("tvp5150: Color killer threshold control = 0x%02x\n",
115 tvp5150_read(sd, TVP5150_COLOR_KIL_THSH_CTL));
116 printk("tvp5150: Luminance processing controls #1 #2 and #3 = %02x %02x %02x\n",
117 tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_1),
118 tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_2),
119 tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_3));
120 printk("tvp5150: Brightness control = 0x%02x\n",
121 tvp5150_read(sd, TVP5150_BRIGHT_CTL));
122 printk("tvp5150: Color saturation control = 0x%02x\n",
123 tvp5150_read(sd, TVP5150_SATURATION_CTL));
124 printk("tvp5150: Hue control = 0x%02x\n",
125 tvp5150_read(sd, TVP5150_HUE_CTL));
126 printk("tvp5150: Contrast control = 0x%02x\n",
127 tvp5150_read(sd, TVP5150_CONTRAST_CTL));
128 printk("tvp5150: Outputs and data rates select = 0x%02x\n",
129 tvp5150_read(sd, TVP5150_DATA_RATE_SEL));
130 printk("tvp5150: Configuration shared pins = 0x%02x\n",
131 tvp5150_read(sd, TVP5150_CONF_SHARED_PIN));
132 printk("tvp5150: Active video cropping start = 0x%02x%02x\n",
133 tvp5150_read(sd, TVP5150_ACT_VD_CROP_ST_MSB),
134 tvp5150_read(sd, TVP5150_ACT_VD_CROP_ST_LSB));
135 printk("tvp5150: Active video cropping stop = 0x%02x%02x\n",
136 tvp5150_read(sd, TVP5150_ACT_VD_CROP_STP_MSB),
137 tvp5150_read(sd, TVP5150_ACT_VD_CROP_STP_LSB));
138 printk("tvp5150: Genlock/RTC = 0x%02x\n",
139 tvp5150_read(sd, TVP5150_GENLOCK));
140 printk("tvp5150: Horizontal sync start = 0x%02x\n",
141 tvp5150_read(sd, TVP5150_HORIZ_SYNC_START));
142 printk("tvp5150: Vertical blanking start = 0x%02x\n",
143 tvp5150_read(sd, TVP5150_VERT_BLANKING_START));
144 printk("tvp5150: Vertical blanking stop = 0x%02x\n",
145 tvp5150_read(sd, TVP5150_VERT_BLANKING_STOP));
146 printk("tvp5150: Chrominance processing control #1 and #2 = %02x %02x\n",
147 tvp5150_read(sd, TVP5150_CHROMA_PROC_CTL_1),
148 tvp5150_read(sd, TVP5150_CHROMA_PROC_CTL_2));
149 printk("tvp5150: Interrupt reset register B = 0x%02x\n",
150 tvp5150_read(sd, TVP5150_INT_RESET_REG_B));
151 printk("tvp5150: Interrupt enable register B = 0x%02x\n",
152 tvp5150_read(sd, TVP5150_INT_ENABLE_REG_B));
153 printk("tvp5150: Interrupt configuration register B = 0x%02x\n",
154 tvp5150_read(sd, TVP5150_INTT_CONFIG_REG_B));
155 printk("tvp5150: Video standard = 0x%02x\n",
156 tvp5150_read(sd, TVP5150_VIDEO_STD));
157 printk("tvp5150: Chroma gain factor: Cb=0x%02x Cr=0x%02x\n",
158 tvp5150_read(sd, TVP5150_CB_GAIN_FACT),
159 tvp5150_read(sd, TVP5150_CR_GAIN_FACTOR));
160 printk("tvp5150: Macrovision on counter = 0x%02x\n",
161 tvp5150_read(sd, TVP5150_MACROVISION_ON_CTR));
162 printk("tvp5150: Macrovision off counter = 0x%02x\n",
163 tvp5150_read(sd, TVP5150_MACROVISION_OFF_CTR));
164 printk("tvp5150: ITU-R BT.656.%d timing(TVP5150AM1 only)\n",
165 (tvp5150_read(sd, TVP5150_REV_SELECT) & 1) ? 3 : 4);
166 printk("tvp5150: Device ID = %02x%02x\n",
167 tvp5150_read(sd, TVP5150_MSB_DEV_ID),
168 tvp5150_read(sd, TVP5150_LSB_DEV_ID));
169 printk("tvp5150: ROM version = (hex) %02x.%02x\n",
170 tvp5150_read(sd, TVP5150_ROM_MAJOR_VER),
171 tvp5150_read(sd, TVP5150_ROM_MINOR_VER));
172 printk("tvp5150: Vertical line count = 0x%02x%02x\n",
173 tvp5150_read(sd, TVP5150_VERT_LN_COUNT_MSB),
174 tvp5150_read(sd, TVP5150_VERT_LN_COUNT_LSB));
175 printk("tvp5150: Interrupt status register B = 0x%02x\n",
176 tvp5150_read(sd, TVP5150_INT_STATUS_REG_B));
177 printk("tvp5150: Interrupt active register B = 0x%02x\n",
178 tvp5150_read(sd, TVP5150_INT_ACTIVE_REG_B));
179 printk("tvp5150: Status regs #1 to #5 = %02x %02x %02x %02x %02x\n",
180 tvp5150_read(sd, TVP5150_STATUS_REG_1),
181 tvp5150_read(sd, TVP5150_STATUS_REG_2),
182 tvp5150_read(sd, TVP5150_STATUS_REG_3),
183 tvp5150_read(sd, TVP5150_STATUS_REG_4),
184 tvp5150_read(sd, TVP5150_STATUS_REG_5));
185
186 dump_reg_range(sd, "Teletext filter 1", TVP5150_TELETEXT_FIL1_INI,
187 TVP5150_TELETEXT_FIL1_END, 8);
188 dump_reg_range(sd, "Teletext filter 2", TVP5150_TELETEXT_FIL2_INI,
189 TVP5150_TELETEXT_FIL2_END, 8);
190
191 printk("tvp5150: Teletext filter enable = 0x%02x\n",
192 tvp5150_read(sd, TVP5150_TELETEXT_FIL_ENA));
193 printk("tvp5150: Interrupt status register A = 0x%02x\n",
194 tvp5150_read(sd, TVP5150_INT_STATUS_REG_A));
195 printk("tvp5150: Interrupt enable register A = 0x%02x\n",
196 tvp5150_read(sd, TVP5150_INT_ENABLE_REG_A));
197 printk("tvp5150: Interrupt configuration = 0x%02x\n",
198 tvp5150_read(sd, TVP5150_INT_CONF));
199 printk("tvp5150: VDP status register = 0x%02x\n",
200 tvp5150_read(sd, TVP5150_VDP_STATUS_REG));
201 printk("tvp5150: FIFO word count = 0x%02x\n",
202 tvp5150_read(sd, TVP5150_FIFO_WORD_COUNT));
203 printk("tvp5150: FIFO interrupt threshold = 0x%02x\n",
204 tvp5150_read(sd, TVP5150_FIFO_INT_THRESHOLD));
205 printk("tvp5150: FIFO reset = 0x%02x\n",
206 tvp5150_read(sd, TVP5150_FIFO_RESET));
207 printk("tvp5150: Line number interrupt = 0x%02x\n",
208 tvp5150_read(sd, TVP5150_LINE_NUMBER_INT));
209 printk("tvp5150: Pixel alignment register = 0x%02x%02x\n",
210 tvp5150_read(sd, TVP5150_PIX_ALIGN_REG_HIGH),
211 tvp5150_read(sd, TVP5150_PIX_ALIGN_REG_LOW));
212 printk("tvp5150: FIFO output control = 0x%02x\n",
213 tvp5150_read(sd, TVP5150_FIFO_OUT_CTRL));
214 printk("tvp5150: Full field enable = 0x%02x\n",
215 tvp5150_read(sd, TVP5150_FULL_FIELD_ENA));
216 printk("tvp5150: Full field mode register = 0x%02x\n",
217 tvp5150_read(sd, TVP5150_FULL_FIELD_MODE_REG));
218
219 dump_reg_range(sd, "CC data", TVP5150_CC_DATA_INI,
220 TVP5150_CC_DATA_END, 8);
221
222 dump_reg_range(sd, "WSS data", TVP5150_WSS_DATA_INI,
223 TVP5150_WSS_DATA_END, 8);
224
225 dump_reg_range(sd, "VPS data", TVP5150_VPS_DATA_INI,
226 TVP5150_VPS_DATA_END, 8);
227
228 dump_reg_range(sd, "VITC data", TVP5150_VITC_DATA_INI,
229 TVP5150_VITC_DATA_END, 10);
230
231 dump_reg_range(sd, "Line mode", TVP5150_LINE_MODE_INI,
232 TVP5150_LINE_MODE_END, 8);
233 return 0;
234 }
235
236 /****************************************************************************
237 Basic functions
238 ****************************************************************************/
239
tvp5150_selmux(struct v4l2_subdev * sd)240 static inline void tvp5150_selmux(struct v4l2_subdev *sd)
241 {
242 int opmode = 0;
243 struct tvp5150 *decoder = to_tvp5150(sd);
244 int input = 0;
245 unsigned char val;
246
247 if ((decoder->output & TVP5150_BLACK_SCREEN) || !decoder->enable)
248 input = 8;
249
250 switch (decoder->input) {
251 case TVP5150_COMPOSITE1:
252 input |= 2;
253 /* fall through */
254 case TVP5150_COMPOSITE0:
255 break;
256 case TVP5150_SVIDEO:
257 default:
258 input |= 1;
259 break;
260 }
261
262 v4l2_dbg(1, debug, sd, "Selecting video route: route input=%i, output=%i "
263 "=> tvp5150 input=%i, opmode=%i\n",
264 decoder->input, decoder->output,
265 input, opmode);
266
267 tvp5150_write(sd, TVP5150_OP_MODE_CTL, opmode);
268 tvp5150_write(sd, TVP5150_VD_IN_SRC_SEL_1, input);
269
270 /* Svideo should enable YCrCb output and disable GPCL output
271 * For Composite and TV, it should be the reverse
272 */
273 val = tvp5150_read(sd, TVP5150_MISC_CTL);
274 if (decoder->input == TVP5150_SVIDEO)
275 val = (val & ~0x40) | 0x10;
276 else
277 val = (val & ~0x10) | 0x40;
278 tvp5150_write(sd, TVP5150_MISC_CTL, val);
279 };
280
281 struct i2c_reg_value {
282 unsigned char reg;
283 unsigned char value;
284 };
285
286 /* Default values as sugested at TVP5150AM1 datasheet */
287 static const struct i2c_reg_value tvp5150_init_default[] = {
288 { /* 0x00 */
289 TVP5150_VD_IN_SRC_SEL_1,0x00
290 },
291 { /* 0x01 */
292 TVP5150_ANAL_CHL_CTL,0x15
293 },
294 { /* 0x02 */
295 TVP5150_OP_MODE_CTL,0x00
296 },
297 { /* 0x03 */
298 TVP5150_MISC_CTL,0x01
299 },
300 { /* 0x06 */
301 TVP5150_COLOR_KIL_THSH_CTL,0x10
302 },
303 { /* 0x07 */
304 TVP5150_LUMA_PROC_CTL_1,0x60
305 },
306 { /* 0x08 */
307 TVP5150_LUMA_PROC_CTL_2,0x00
308 },
309 { /* 0x09 */
310 TVP5150_BRIGHT_CTL,0x80
311 },
312 { /* 0x0a */
313 TVP5150_SATURATION_CTL,0x80
314 },
315 { /* 0x0b */
316 TVP5150_HUE_CTL,0x00
317 },
318 { /* 0x0c */
319 TVP5150_CONTRAST_CTL,0x80
320 },
321 { /* 0x0d */
322 TVP5150_DATA_RATE_SEL,0x47
323 },
324 { /* 0x0e */
325 TVP5150_LUMA_PROC_CTL_3,0x00
326 },
327 { /* 0x0f */
328 TVP5150_CONF_SHARED_PIN,0x08
329 },
330 { /* 0x11 */
331 TVP5150_ACT_VD_CROP_ST_MSB,0x00
332 },
333 { /* 0x12 */
334 TVP5150_ACT_VD_CROP_ST_LSB,0x00
335 },
336 { /* 0x13 */
337 TVP5150_ACT_VD_CROP_STP_MSB,0x00
338 },
339 { /* 0x14 */
340 TVP5150_ACT_VD_CROP_STP_LSB,0x00
341 },
342 { /* 0x15 */
343 TVP5150_GENLOCK,0x01
344 },
345 { /* 0x16 */
346 TVP5150_HORIZ_SYNC_START,0x80
347 },
348 { /* 0x18 */
349 TVP5150_VERT_BLANKING_START,0x00
350 },
351 { /* 0x19 */
352 TVP5150_VERT_BLANKING_STOP,0x00
353 },
354 { /* 0x1a */
355 TVP5150_CHROMA_PROC_CTL_1,0x0c
356 },
357 { /* 0x1b */
358 TVP5150_CHROMA_PROC_CTL_2,0x14
359 },
360 { /* 0x1c */
361 TVP5150_INT_RESET_REG_B,0x00
362 },
363 { /* 0x1d */
364 TVP5150_INT_ENABLE_REG_B,0x00
365 },
366 { /* 0x1e */
367 TVP5150_INTT_CONFIG_REG_B,0x00
368 },
369 { /* 0x28 */
370 TVP5150_VIDEO_STD,0x00
371 },
372 { /* 0x2e */
373 TVP5150_MACROVISION_ON_CTR,0x0f
374 },
375 { /* 0x2f */
376 TVP5150_MACROVISION_OFF_CTR,0x01
377 },
378 { /* 0xbb */
379 TVP5150_TELETEXT_FIL_ENA,0x00
380 },
381 { /* 0xc0 */
382 TVP5150_INT_STATUS_REG_A,0x00
383 },
384 { /* 0xc1 */
385 TVP5150_INT_ENABLE_REG_A,0x00
386 },
387 { /* 0xc2 */
388 TVP5150_INT_CONF,0x04
389 },
390 { /* 0xc8 */
391 TVP5150_FIFO_INT_THRESHOLD,0x80
392 },
393 { /* 0xc9 */
394 TVP5150_FIFO_RESET,0x00
395 },
396 { /* 0xca */
397 TVP5150_LINE_NUMBER_INT,0x00
398 },
399 { /* 0xcb */
400 TVP5150_PIX_ALIGN_REG_LOW,0x4e
401 },
402 { /* 0xcc */
403 TVP5150_PIX_ALIGN_REG_HIGH,0x00
404 },
405 { /* 0xcd */
406 TVP5150_FIFO_OUT_CTRL,0x01
407 },
408 { /* 0xcf */
409 TVP5150_FULL_FIELD_ENA,0x00
410 },
411 { /* 0xd0 */
412 TVP5150_LINE_MODE_INI,0x00
413 },
414 { /* 0xfc */
415 TVP5150_FULL_FIELD_MODE_REG,0x7f
416 },
417 { /* end of data */
418 0xff,0xff
419 }
420 };
421
422 /* Default values as sugested at TVP5150AM1 datasheet */
423 static const struct i2c_reg_value tvp5150_init_enable[] = {
424 {
425 TVP5150_CONF_SHARED_PIN, 2
426 },{ /* Automatic offset and AGC enabled */
427 TVP5150_ANAL_CHL_CTL, 0x15
428 },{ /* Activate YCrCb output 0x9 or 0xd ? */
429 TVP5150_MISC_CTL, 0x6f
430 },{ /* Activates video std autodetection for all standards */
431 TVP5150_AUTOSW_MSK, 0x0
432 },{ /* Default format: 0x47. For 4:2:2: 0x40 */
433 TVP5150_DATA_RATE_SEL, 0x47
434 },{
435 TVP5150_CHROMA_PROC_CTL_1, 0x0c
436 },{
437 TVP5150_CHROMA_PROC_CTL_2, 0x54
438 },{ /* Non documented, but initialized on WinTV USB2 */
439 0x27, 0x20
440 },{
441 0xff,0xff
442 }
443 };
444
445 struct tvp5150_vbi_type {
446 unsigned int vbi_type;
447 unsigned int ini_line;
448 unsigned int end_line;
449 unsigned int by_field :1;
450 };
451
452 struct i2c_vbi_ram_value {
453 u16 reg;
454 struct tvp5150_vbi_type type;
455 unsigned char values[16];
456 };
457
458 /* This struct have the values for each supported VBI Standard
459 * by
460 tvp5150_vbi_types should follow the same order as vbi_ram_default
461 * value 0 means rom position 0x10, value 1 means rom position 0x30
462 * and so on. There are 16 possible locations from 0 to 15.
463 */
464
465 static struct i2c_vbi_ram_value vbi_ram_default[] =
466 {
467 /* FIXME: Current api doesn't handle all VBI types, those not
468 yet supported are placed under #if 0 */
469 #if 0
470 {0x010, /* Teletext, SECAM, WST System A */
471 {V4L2_SLICED_TELETEXT_SECAM,6,23,1},
472 { 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x26,
473 0xe6, 0xb4, 0x0e, 0x00, 0x00, 0x00, 0x10, 0x00 }
474 },
475 #endif
476 {0x030, /* Teletext, PAL, WST System B */
477 {V4L2_SLICED_TELETEXT_B,6,22,1},
478 { 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x2b,
479 0xa6, 0x72, 0x10, 0x00, 0x00, 0x00, 0x10, 0x00 }
480 },
481 #if 0
482 {0x050, /* Teletext, PAL, WST System C */
483 {V4L2_SLICED_TELETEXT_PAL_C,6,22,1},
484 { 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22,
485 0xa6, 0x98, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
486 },
487 {0x070, /* Teletext, NTSC, WST System B */
488 {V4L2_SLICED_TELETEXT_NTSC_B,10,21,1},
489 { 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x23,
490 0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
491 },
492 {0x090, /* Tetetext, NTSC NABTS System C */
493 {V4L2_SLICED_TELETEXT_NTSC_C,10,21,1},
494 { 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22,
495 0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x15, 0x00 }
496 },
497 {0x0b0, /* Teletext, NTSC-J, NABTS System D */
498 {V4L2_SLICED_TELETEXT_NTSC_D,10,21,1},
499 { 0xaa, 0xaa, 0xff, 0xff, 0xa7, 0x2e, 0x20, 0x23,
500 0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
501 },
502 {0x0d0, /* Closed Caption, PAL/SECAM */
503 {V4L2_SLICED_CAPTION_625,22,22,1},
504 { 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02,
505 0xa6, 0x7b, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 }
506 },
507 #endif
508 {0x0f0, /* Closed Caption, NTSC */
509 {V4L2_SLICED_CAPTION_525,21,21,1},
510 { 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02,
511 0x69, 0x8c, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 }
512 },
513 {0x110, /* Wide Screen Signal, PAL/SECAM */
514 {V4L2_SLICED_WSS_625,23,23,1},
515 { 0x5b, 0x55, 0xc5, 0xff, 0x00, 0x71, 0x6e, 0x42,
516 0xa6, 0xcd, 0x0f, 0x00, 0x00, 0x00, 0x3a, 0x00 }
517 },
518 #if 0
519 {0x130, /* Wide Screen Signal, NTSC C */
520 {V4L2_SLICED_WSS_525,20,20,1},
521 { 0x38, 0x00, 0x3f, 0x00, 0x00, 0x71, 0x6e, 0x43,
522 0x69, 0x7c, 0x08, 0x00, 0x00, 0x00, 0x39, 0x00 }
523 },
524 {0x150, /* Vertical Interval Timecode (VITC), PAL/SECAM */
525 {V4l2_SLICED_VITC_625,6,22,0},
526 { 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49,
527 0xa6, 0x85, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 }
528 },
529 {0x170, /* Vertical Interval Timecode (VITC), NTSC */
530 {V4l2_SLICED_VITC_525,10,20,0},
531 { 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49,
532 0x69, 0x94, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 }
533 },
534 #endif
535 {0x190, /* Video Program System (VPS), PAL */
536 {V4L2_SLICED_VPS,16,16,0},
537 { 0xaa, 0xaa, 0xff, 0xff, 0xba, 0xce, 0x2b, 0x0d,
538 0xa6, 0xda, 0x0b, 0x00, 0x00, 0x00, 0x60, 0x00 }
539 },
540 /* 0x1d0 User programmable */
541
542 /* End of struct */
543 { (u16)-1 }
544 };
545
tvp5150_write_inittab(struct v4l2_subdev * sd,const struct i2c_reg_value * regs)546 static int tvp5150_write_inittab(struct v4l2_subdev *sd,
547 const struct i2c_reg_value *regs)
548 {
549 while (regs->reg != 0xff) {
550 tvp5150_write(sd, regs->reg, regs->value);
551 regs++;
552 }
553 return 0;
554 }
555
tvp5150_vdp_init(struct v4l2_subdev * sd,const struct i2c_vbi_ram_value * regs)556 static int tvp5150_vdp_init(struct v4l2_subdev *sd,
557 const struct i2c_vbi_ram_value *regs)
558 {
559 unsigned int i;
560
561 /* Disable Full Field */
562 tvp5150_write(sd, TVP5150_FULL_FIELD_ENA, 0);
563
564 /* Before programming, Line mode should be at 0xff */
565 for (i = TVP5150_LINE_MODE_INI; i <= TVP5150_LINE_MODE_END; i++)
566 tvp5150_write(sd, i, 0xff);
567
568 /* Load Ram Table */
569 while (regs->reg != (u16)-1) {
570 tvp5150_write(sd, TVP5150_CONF_RAM_ADDR_HIGH, regs->reg >> 8);
571 tvp5150_write(sd, TVP5150_CONF_RAM_ADDR_LOW, regs->reg);
572
573 for (i = 0; i < 16; i++)
574 tvp5150_write(sd, TVP5150_VDP_CONF_RAM_DATA, regs->values[i]);
575
576 regs++;
577 }
578 return 0;
579 }
580
581 /* Fills VBI capabilities based on i2c_vbi_ram_value struct */
tvp5150_g_sliced_vbi_cap(struct v4l2_subdev * sd,struct v4l2_sliced_vbi_cap * cap)582 static int tvp5150_g_sliced_vbi_cap(struct v4l2_subdev *sd,
583 struct v4l2_sliced_vbi_cap *cap)
584 {
585 const struct i2c_vbi_ram_value *regs = vbi_ram_default;
586 int line;
587
588 v4l2_dbg(1, debug, sd, "g_sliced_vbi_cap\n");
589 memset(cap, 0, sizeof *cap);
590
591 while (regs->reg != (u16)-1 ) {
592 for (line=regs->type.ini_line;line<=regs->type.end_line;line++) {
593 cap->service_lines[0][line] |= regs->type.vbi_type;
594 }
595 cap->service_set |= regs->type.vbi_type;
596
597 regs++;
598 }
599 return 0;
600 }
601
602 /* Set vbi processing
603 * type - one of tvp5150_vbi_types
604 * line - line to gather data
605 * fields: bit 0 field1, bit 1, field2
606 * flags (default=0xf0) is a bitmask, were set means:
607 * bit 7: enable filtering null bytes on CC
608 * bit 6: send data also to FIFO
609 * bit 5: don't allow data with errors on FIFO
610 * bit 4: enable ECC when possible
611 * pix_align = pix alignment:
612 * LSB = field1
613 * MSB = field2
614 */
tvp5150_set_vbi(struct v4l2_subdev * sd,const struct i2c_vbi_ram_value * regs,unsigned int type,u8 flags,int line,const int fields)615 static int tvp5150_set_vbi(struct v4l2_subdev *sd,
616 const struct i2c_vbi_ram_value *regs,
617 unsigned int type,u8 flags, int line,
618 const int fields)
619 {
620 struct tvp5150 *decoder = to_tvp5150(sd);
621 v4l2_std_id std = decoder->norm;
622 u8 reg;
623 int pos=0;
624
625 if (std == V4L2_STD_ALL) {
626 v4l2_err(sd, "VBI can't be configured without knowing number of lines\n");
627 return 0;
628 } else if (std & V4L2_STD_625_50) {
629 /* Don't follow NTSC Line number convension */
630 line += 3;
631 }
632
633 if (line<6||line>27)
634 return 0;
635
636 while (regs->reg != (u16)-1 ) {
637 if ((type & regs->type.vbi_type) &&
638 (line>=regs->type.ini_line) &&
639 (line<=regs->type.end_line)) {
640 type=regs->type.vbi_type;
641 break;
642 }
643
644 regs++;
645 pos++;
646 }
647 if (regs->reg == (u16)-1)
648 return 0;
649
650 type=pos | (flags & 0xf0);
651 reg=((line-6)<<1)+TVP5150_LINE_MODE_INI;
652
653 if (fields&1) {
654 tvp5150_write(sd, reg, type);
655 }
656
657 if (fields&2) {
658 tvp5150_write(sd, reg+1, type);
659 }
660
661 return type;
662 }
663
tvp5150_get_vbi(struct v4l2_subdev * sd,const struct i2c_vbi_ram_value * regs,int line)664 static int tvp5150_get_vbi(struct v4l2_subdev *sd,
665 const struct i2c_vbi_ram_value *regs, int line)
666 {
667 struct tvp5150 *decoder = to_tvp5150(sd);
668 v4l2_std_id std = decoder->norm;
669 u8 reg;
670 int pos, type = 0;
671
672 if (std == V4L2_STD_ALL) {
673 v4l2_err(sd, "VBI can't be configured without knowing number of lines\n");
674 return 0;
675 } else if (std & V4L2_STD_625_50) {
676 /* Don't follow NTSC Line number convension */
677 line += 3;
678 }
679
680 if (line < 6 || line > 27)
681 return 0;
682
683 reg = ((line - 6) << 1) + TVP5150_LINE_MODE_INI;
684
685 pos = tvp5150_read(sd, reg) & 0x0f;
686 if (pos < 0x0f)
687 type = regs[pos].type.vbi_type;
688
689 pos = tvp5150_read(sd, reg + 1) & 0x0f;
690 if (pos < 0x0f)
691 type |= regs[pos].type.vbi_type;
692
693 return type;
694 }
695
tvp5150_set_std(struct v4l2_subdev * sd,v4l2_std_id std)696 static int tvp5150_set_std(struct v4l2_subdev *sd, v4l2_std_id std)
697 {
698 struct tvp5150 *decoder = to_tvp5150(sd);
699 int fmt = 0;
700
701 decoder->norm = std;
702
703 /* First tests should be against specific std */
704
705 if (std == V4L2_STD_ALL) {
706 fmt = VIDEO_STD_AUTO_SWITCH_BIT; /* Autodetect mode */
707 } else if (std & V4L2_STD_NTSC_443) {
708 fmt = VIDEO_STD_NTSC_4_43_BIT;
709 } else if (std & V4L2_STD_PAL_M) {
710 fmt = VIDEO_STD_PAL_M_BIT;
711 } else if (std & (V4L2_STD_PAL_N | V4L2_STD_PAL_Nc)) {
712 fmt = VIDEO_STD_PAL_COMBINATION_N_BIT;
713 } else {
714 /* Then, test against generic ones */
715 if (std & V4L2_STD_NTSC)
716 fmt = VIDEO_STD_NTSC_MJ_BIT;
717 else if (std & V4L2_STD_PAL)
718 fmt = VIDEO_STD_PAL_BDGHIN_BIT;
719 else if (std & V4L2_STD_SECAM)
720 fmt = VIDEO_STD_SECAM_BIT;
721 }
722
723 v4l2_dbg(1, debug, sd, "Set video std register to %d.\n", fmt);
724 tvp5150_write(sd, TVP5150_VIDEO_STD, fmt);
725 return 0;
726 }
727
tvp5150_s_std(struct v4l2_subdev * sd,v4l2_std_id std)728 static int tvp5150_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
729 {
730 struct tvp5150 *decoder = to_tvp5150(sd);
731
732 if (decoder->norm == std)
733 return 0;
734
735 return tvp5150_set_std(sd, std);
736 }
737
tvp5150_reset(struct v4l2_subdev * sd,u32 val)738 static int tvp5150_reset(struct v4l2_subdev *sd, u32 val)
739 {
740 struct tvp5150 *decoder = to_tvp5150(sd);
741
742 /* Initializes TVP5150 to its default values */
743 tvp5150_write_inittab(sd, tvp5150_init_default);
744
745 /* Initializes VDP registers */
746 tvp5150_vdp_init(sd, vbi_ram_default);
747
748 /* Selects decoder input */
749 tvp5150_selmux(sd);
750
751 /* Initializes TVP5150 to stream enabled values */
752 tvp5150_write_inittab(sd, tvp5150_init_enable);
753
754 /* Initialize image preferences */
755 v4l2_ctrl_handler_setup(&decoder->hdl);
756
757 tvp5150_set_std(sd, decoder->norm);
758 return 0;
759 };
760
tvp5150_s_ctrl(struct v4l2_ctrl * ctrl)761 static int tvp5150_s_ctrl(struct v4l2_ctrl *ctrl)
762 {
763 struct v4l2_subdev *sd = to_sd(ctrl);
764
765 switch (ctrl->id) {
766 case V4L2_CID_BRIGHTNESS:
767 tvp5150_write(sd, TVP5150_BRIGHT_CTL, ctrl->val);
768 return 0;
769 case V4L2_CID_CONTRAST:
770 tvp5150_write(sd, TVP5150_CONTRAST_CTL, ctrl->val);
771 return 0;
772 case V4L2_CID_SATURATION:
773 tvp5150_write(sd, TVP5150_SATURATION_CTL, ctrl->val);
774 return 0;
775 case V4L2_CID_HUE:
776 tvp5150_write(sd, TVP5150_HUE_CTL, ctrl->val);
777 return 0;
778 }
779 return -EINVAL;
780 }
781
tvp5150_read_std(struct v4l2_subdev * sd)782 static v4l2_std_id tvp5150_read_std(struct v4l2_subdev *sd)
783 {
784 int val = tvp5150_read(sd, TVP5150_STATUS_REG_5);
785
786 switch (val & 0x0F) {
787 case 0x01:
788 return V4L2_STD_NTSC;
789 case 0x03:
790 return V4L2_STD_PAL;
791 case 0x05:
792 return V4L2_STD_PAL_M;
793 case 0x07:
794 return V4L2_STD_PAL_N | V4L2_STD_PAL_Nc;
795 case 0x09:
796 return V4L2_STD_NTSC_443;
797 case 0xb:
798 return V4L2_STD_SECAM;
799 default:
800 return V4L2_STD_UNKNOWN;
801 }
802 }
803
tvp5150_enum_mbus_fmt(struct v4l2_subdev * sd,unsigned index,enum v4l2_mbus_pixelcode * code)804 static int tvp5150_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index,
805 enum v4l2_mbus_pixelcode *code)
806 {
807 if (index)
808 return -EINVAL;
809
810 *code = V4L2_MBUS_FMT_YUYV8_2X8;
811 return 0;
812 }
813
tvp5150_mbus_fmt(struct v4l2_subdev * sd,struct v4l2_mbus_framefmt * f)814 static int tvp5150_mbus_fmt(struct v4l2_subdev *sd,
815 struct v4l2_mbus_framefmt *f)
816 {
817 struct tvp5150 *decoder = to_tvp5150(sd);
818 v4l2_std_id std;
819
820 if (f == NULL)
821 return -EINVAL;
822
823 tvp5150_reset(sd, 0);
824
825 /* Calculate height and width based on current standard */
826 if (decoder->norm == V4L2_STD_ALL)
827 std = tvp5150_read_std(sd);
828 else
829 std = decoder->norm;
830
831 f->width = 720;
832 if (std & V4L2_STD_525_60)
833 f->height = 480;
834 else
835 f->height = 576;
836
837 f->code = V4L2_MBUS_FMT_YUYV8_2X8;
838 f->field = V4L2_FIELD_SEQ_TB;
839 f->colorspace = V4L2_COLORSPACE_SMPTE170M;
840
841 v4l2_dbg(1, debug, sd, "width = %d, height = %d\n", f->width,
842 f->height);
843 return 0;
844 }
845
846 /****************************************************************************
847 I2C Command
848 ****************************************************************************/
849
tvp5150_s_routing(struct v4l2_subdev * sd,u32 input,u32 output,u32 config)850 static int tvp5150_s_routing(struct v4l2_subdev *sd,
851 u32 input, u32 output, u32 config)
852 {
853 struct tvp5150 *decoder = to_tvp5150(sd);
854
855 decoder->input = input;
856 decoder->output = output;
857 tvp5150_selmux(sd);
858 return 0;
859 }
860
tvp5150_s_raw_fmt(struct v4l2_subdev * sd,struct v4l2_vbi_format * fmt)861 static int tvp5150_s_raw_fmt(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt)
862 {
863 /* this is for capturing 36 raw vbi lines
864 if there's a way to cut off the beginning 2 vbi lines
865 with the tvp5150 then the vbi line count could be lowered
866 to 17 lines/field again, although I couldn't find a register
867 which could do that cropping */
868 if (fmt->sample_format == V4L2_PIX_FMT_GREY)
869 tvp5150_write(sd, TVP5150_LUMA_PROC_CTL_1, 0x70);
870 if (fmt->count[0] == 18 && fmt->count[1] == 18) {
871 tvp5150_write(sd, TVP5150_VERT_BLANKING_START, 0x00);
872 tvp5150_write(sd, TVP5150_VERT_BLANKING_STOP, 0x01);
873 }
874 return 0;
875 }
876
tvp5150_s_sliced_fmt(struct v4l2_subdev * sd,struct v4l2_sliced_vbi_format * svbi)877 static int tvp5150_s_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *svbi)
878 {
879 int i;
880
881 if (svbi->service_set != 0) {
882 for (i = 0; i <= 23; i++) {
883 svbi->service_lines[1][i] = 0;
884 svbi->service_lines[0][i] =
885 tvp5150_set_vbi(sd, vbi_ram_default,
886 svbi->service_lines[0][i], 0xf0, i, 3);
887 }
888 /* Enables FIFO */
889 tvp5150_write(sd, TVP5150_FIFO_OUT_CTRL, 1);
890 } else {
891 /* Disables FIFO*/
892 tvp5150_write(sd, TVP5150_FIFO_OUT_CTRL, 0);
893
894 /* Disable Full Field */
895 tvp5150_write(sd, TVP5150_FULL_FIELD_ENA, 0);
896
897 /* Disable Line modes */
898 for (i = TVP5150_LINE_MODE_INI; i <= TVP5150_LINE_MODE_END; i++)
899 tvp5150_write(sd, i, 0xff);
900 }
901 return 0;
902 }
903
tvp5150_g_sliced_fmt(struct v4l2_subdev * sd,struct v4l2_sliced_vbi_format * svbi)904 static int tvp5150_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *svbi)
905 {
906 int i, mask = 0;
907
908 memset(svbi, 0, sizeof(*svbi));
909
910 for (i = 0; i <= 23; i++) {
911 svbi->service_lines[0][i] =
912 tvp5150_get_vbi(sd, vbi_ram_default, i);
913 mask |= svbi->service_lines[0][i];
914 }
915 svbi->service_set = mask;
916 return 0;
917 }
918
tvp5150_g_chip_ident(struct v4l2_subdev * sd,struct v4l2_dbg_chip_ident * chip)919 static int tvp5150_g_chip_ident(struct v4l2_subdev *sd,
920 struct v4l2_dbg_chip_ident *chip)
921 {
922 int rev;
923 struct i2c_client *client = v4l2_get_subdevdata(sd);
924
925 rev = tvp5150_read(sd, TVP5150_ROM_MAJOR_VER) << 8 |
926 tvp5150_read(sd, TVP5150_ROM_MINOR_VER);
927
928 return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_TVP5150,
929 rev);
930 }
931
932
933 #ifdef CONFIG_VIDEO_ADV_DEBUG
tvp5150_g_register(struct v4l2_subdev * sd,struct v4l2_dbg_register * reg)934 static int tvp5150_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
935 {
936 struct i2c_client *client = v4l2_get_subdevdata(sd);
937
938 if (!v4l2_chip_match_i2c_client(client, ®->match))
939 return -EINVAL;
940 if (!capable(CAP_SYS_ADMIN))
941 return -EPERM;
942 reg->val = tvp5150_read(sd, reg->reg & 0xff);
943 reg->size = 1;
944 return 0;
945 }
946
tvp5150_s_register(struct v4l2_subdev * sd,struct v4l2_dbg_register * reg)947 static int tvp5150_s_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
948 {
949 struct i2c_client *client = v4l2_get_subdevdata(sd);
950
951 if (!v4l2_chip_match_i2c_client(client, ®->match))
952 return -EINVAL;
953 if (!capable(CAP_SYS_ADMIN))
954 return -EPERM;
955 tvp5150_write(sd, reg->reg & 0xff, reg->val & 0xff);
956 return 0;
957 }
958 #endif
959
tvp5150_g_tuner(struct v4l2_subdev * sd,struct v4l2_tuner * vt)960 static int tvp5150_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
961 {
962 int status = tvp5150_read(sd, 0x88);
963
964 vt->signal = ((status & 0x04) && (status & 0x02)) ? 0xffff : 0x0;
965 return 0;
966 }
967
968 /* ----------------------------------------------------------------------- */
969
970 static const struct v4l2_ctrl_ops tvp5150_ctrl_ops = {
971 .s_ctrl = tvp5150_s_ctrl,
972 };
973
974 static const struct v4l2_subdev_core_ops tvp5150_core_ops = {
975 .log_status = tvp5150_log_status,
976 .g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
977 .try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
978 .s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
979 .g_ctrl = v4l2_subdev_g_ctrl,
980 .s_ctrl = v4l2_subdev_s_ctrl,
981 .queryctrl = v4l2_subdev_queryctrl,
982 .querymenu = v4l2_subdev_querymenu,
983 .s_std = tvp5150_s_std,
984 .reset = tvp5150_reset,
985 .g_chip_ident = tvp5150_g_chip_ident,
986 #ifdef CONFIG_VIDEO_ADV_DEBUG
987 .g_register = tvp5150_g_register,
988 .s_register = tvp5150_s_register,
989 #endif
990 };
991
992 static const struct v4l2_subdev_tuner_ops tvp5150_tuner_ops = {
993 .g_tuner = tvp5150_g_tuner,
994 };
995
996 static const struct v4l2_subdev_video_ops tvp5150_video_ops = {
997 .s_routing = tvp5150_s_routing,
998 .enum_mbus_fmt = tvp5150_enum_mbus_fmt,
999 .s_mbus_fmt = tvp5150_mbus_fmt,
1000 .try_mbus_fmt = tvp5150_mbus_fmt,
1001 };
1002
1003 static const struct v4l2_subdev_vbi_ops tvp5150_vbi_ops = {
1004 .g_sliced_vbi_cap = tvp5150_g_sliced_vbi_cap,
1005 .g_sliced_fmt = tvp5150_g_sliced_fmt,
1006 .s_sliced_fmt = tvp5150_s_sliced_fmt,
1007 .s_raw_fmt = tvp5150_s_raw_fmt,
1008 };
1009
1010 static const struct v4l2_subdev_ops tvp5150_ops = {
1011 .core = &tvp5150_core_ops,
1012 .tuner = &tvp5150_tuner_ops,
1013 .video = &tvp5150_video_ops,
1014 .vbi = &tvp5150_vbi_ops,
1015 };
1016
1017
1018 /****************************************************************************
1019 I2C Client & Driver
1020 ****************************************************************************/
1021
tvp5150_probe(struct i2c_client * c,const struct i2c_device_id * id)1022 static int tvp5150_probe(struct i2c_client *c,
1023 const struct i2c_device_id *id)
1024 {
1025 struct tvp5150 *core;
1026 struct v4l2_subdev *sd;
1027 u8 msb_id, lsb_id, msb_rom, lsb_rom;
1028
1029 /* Check if the adapter supports the needed features */
1030 if (!i2c_check_functionality(c->adapter,
1031 I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
1032 return -EIO;
1033
1034 core = kzalloc(sizeof(struct tvp5150), GFP_KERNEL);
1035 if (!core) {
1036 return -ENOMEM;
1037 }
1038 sd = &core->sd;
1039 v4l2_i2c_subdev_init(sd, c, &tvp5150_ops);
1040 v4l_info(c, "chip found @ 0x%02x (%s)\n",
1041 c->addr << 1, c->adapter->name);
1042
1043 msb_id = tvp5150_read(sd, TVP5150_MSB_DEV_ID);
1044 lsb_id = tvp5150_read(sd, TVP5150_LSB_DEV_ID);
1045 msb_rom = tvp5150_read(sd, TVP5150_ROM_MAJOR_VER);
1046 lsb_rom = tvp5150_read(sd, TVP5150_ROM_MINOR_VER);
1047
1048 if (msb_rom == 4 && lsb_rom == 0) { /* Is TVP5150AM1 */
1049 v4l2_info(sd, "tvp%02x%02xam1 detected.\n", msb_id, lsb_id);
1050
1051 /* ITU-T BT.656.4 timing */
1052 tvp5150_write(sd, TVP5150_REV_SELECT, 0);
1053 } else {
1054 if (msb_rom == 3 || lsb_rom == 0x21) { /* Is TVP5150A */
1055 v4l2_info(sd, "tvp%02x%02xa detected.\n", msb_id, lsb_id);
1056 } else {
1057 v4l2_info(sd, "*** unknown tvp%02x%02x chip detected.\n",
1058 msb_id, lsb_id);
1059 v4l2_info(sd, "*** Rom ver is %d.%d\n", msb_rom, lsb_rom);
1060 }
1061 }
1062
1063 core->norm = V4L2_STD_ALL; /* Default is autodetect */
1064 core->input = TVP5150_COMPOSITE1;
1065 core->enable = 1;
1066
1067 v4l2_ctrl_handler_init(&core->hdl, 4);
1068 v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
1069 V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
1070 v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
1071 V4L2_CID_CONTRAST, 0, 255, 1, 128);
1072 v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
1073 V4L2_CID_SATURATION, 0, 255, 1, 128);
1074 v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
1075 V4L2_CID_HUE, -128, 127, 1, 0);
1076 sd->ctrl_handler = &core->hdl;
1077 if (core->hdl.error) {
1078 int err = core->hdl.error;
1079
1080 v4l2_ctrl_handler_free(&core->hdl);
1081 kfree(core);
1082 return err;
1083 }
1084 v4l2_ctrl_handler_setup(&core->hdl);
1085
1086 if (debug > 1)
1087 tvp5150_log_status(sd);
1088 return 0;
1089 }
1090
tvp5150_remove(struct i2c_client * c)1091 static int tvp5150_remove(struct i2c_client *c)
1092 {
1093 struct v4l2_subdev *sd = i2c_get_clientdata(c);
1094 struct tvp5150 *decoder = to_tvp5150(sd);
1095
1096 v4l2_dbg(1, debug, sd,
1097 "tvp5150.c: removing tvp5150 adapter on address 0x%x\n",
1098 c->addr << 1);
1099
1100 v4l2_device_unregister_subdev(sd);
1101 v4l2_ctrl_handler_free(&decoder->hdl);
1102 kfree(to_tvp5150(sd));
1103 return 0;
1104 }
1105
1106 /* ----------------------------------------------------------------------- */
1107
1108 static const struct i2c_device_id tvp5150_id[] = {
1109 { "tvp5150", 0 },
1110 { }
1111 };
1112 MODULE_DEVICE_TABLE(i2c, tvp5150_id);
1113
1114 static struct i2c_driver tvp5150_driver = {
1115 .driver = {
1116 .owner = THIS_MODULE,
1117 .name = "tvp5150",
1118 },
1119 .probe = tvp5150_probe,
1120 .remove = tvp5150_remove,
1121 .id_table = tvp5150_id,
1122 };
1123
init_tvp5150(void)1124 static __init int init_tvp5150(void)
1125 {
1126 return i2c_add_driver(&tvp5150_driver);
1127 }
1128
exit_tvp5150(void)1129 static __exit void exit_tvp5150(void)
1130 {
1131 i2c_del_driver(&tvp5150_driver);
1132 }
1133
1134 module_init(init_tvp5150);
1135 module_exit(exit_tvp5150);
1136