1 /*
2 * ALC260 quirk models
3 * included by patch_realtek.c
4 */
5
6 /* ALC260 models */
7 enum {
8 ALC260_AUTO,
9 ALC260_BASIC,
10 ALC260_FUJITSU_S702X,
11 ALC260_ACER,
12 ALC260_WILL,
13 ALC260_REPLACER_672V,
14 ALC260_FAVORIT100,
15 #ifdef CONFIG_SND_DEBUG
16 ALC260_TEST,
17 #endif
18 ALC260_MODEL_LAST /* last tag */
19 };
20
21 static const hda_nid_t alc260_dac_nids[1] = {
22 /* front */
23 0x02,
24 };
25
26 static const hda_nid_t alc260_adc_nids[1] = {
27 /* ADC0 */
28 0x04,
29 };
30
31 static const hda_nid_t alc260_adc_nids_alt[1] = {
32 /* ADC1 */
33 0x05,
34 };
35
36 /* NIDs used when simultaneous access to both ADCs makes sense. Note that
37 * alc260_capture_mixer assumes ADC0 (nid 0x04) is the first ADC.
38 */
39 static const hda_nid_t alc260_dual_adc_nids[2] = {
40 /* ADC0, ADC1 */
41 0x04, 0x05
42 };
43
44 #define ALC260_DIGOUT_NID 0x03
45 #define ALC260_DIGIN_NID 0x06
46
47 static const struct hda_input_mux alc260_capture_source = {
48 .num_items = 4,
49 .items = {
50 { "Mic", 0x0 },
51 { "Front Mic", 0x1 },
52 { "Line", 0x2 },
53 { "CD", 0x4 },
54 },
55 };
56
57 /* On Fujitsu S702x laptops capture only makes sense from Mic/LineIn jack,
58 * headphone jack and the internal CD lines since these are the only pins at
59 * which audio can appear. For flexibility, also allow the option of
60 * recording the mixer output on the second ADC (ADC0 doesn't have a
61 * connection to the mixer output).
62 */
63 static const struct hda_input_mux alc260_fujitsu_capture_sources[2] = {
64 {
65 .num_items = 3,
66 .items = {
67 { "Mic/Line", 0x0 },
68 { "CD", 0x4 },
69 { "Headphone", 0x2 },
70 },
71 },
72 {
73 .num_items = 4,
74 .items = {
75 { "Mic/Line", 0x0 },
76 { "CD", 0x4 },
77 { "Headphone", 0x2 },
78 { "Mixer", 0x5 },
79 },
80 },
81
82 };
83
84 /* Acer TravelMate(/Extensa/Aspire) notebooks have similar configuration to
85 * the Fujitsu S702x, but jacks are marked differently.
86 */
87 static const struct hda_input_mux alc260_acer_capture_sources[2] = {
88 {
89 .num_items = 4,
90 .items = {
91 { "Mic", 0x0 },
92 { "Line", 0x2 },
93 { "CD", 0x4 },
94 { "Headphone", 0x5 },
95 },
96 },
97 {
98 .num_items = 5,
99 .items = {
100 { "Mic", 0x0 },
101 { "Line", 0x2 },
102 { "CD", 0x4 },
103 { "Headphone", 0x6 },
104 { "Mixer", 0x5 },
105 },
106 },
107 };
108
109 /* Maxdata Favorit 100XS */
110 static const struct hda_input_mux alc260_favorit100_capture_sources[2] = {
111 {
112 .num_items = 2,
113 .items = {
114 { "Line/Mic", 0x0 },
115 { "CD", 0x4 },
116 },
117 },
118 {
119 .num_items = 3,
120 .items = {
121 { "Line/Mic", 0x0 },
122 { "CD", 0x4 },
123 { "Mixer", 0x5 },
124 },
125 },
126 };
127
128 /*
129 * This is just place-holder, so there's something for alc_build_pcms to look
130 * at when it calculates the maximum number of channels. ALC260 has no mixer
131 * element which allows changing the channel mode, so the verb list is
132 * never used.
133 */
134 static const struct hda_channel_mode alc260_modes[1] = {
135 { 2, NULL },
136 };
137
138
139 /* Mixer combinations
140 *
141 * basic: base_output + input + pc_beep + capture
142 * fujitsu: fujitsu + capture
143 * acer: acer + capture
144 */
145
146 static const struct snd_kcontrol_new alc260_base_output_mixer[] = {
147 HDA_CODEC_VOLUME("Front Playback Volume", 0x08, 0x0, HDA_OUTPUT),
148 HDA_BIND_MUTE("Front Playback Switch", 0x08, 2, HDA_INPUT),
149 HDA_CODEC_VOLUME("Headphone Playback Volume", 0x09, 0x0, HDA_OUTPUT),
150 HDA_BIND_MUTE("Headphone Playback Switch", 0x09, 2, HDA_INPUT),
151 HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT),
152 HDA_BIND_MUTE_MONO("Mono Playback Switch", 0x0a, 1, 2, HDA_INPUT),
153 { } /* end */
154 };
155
156 static const struct snd_kcontrol_new alc260_input_mixer[] = {
157 HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
158 HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
159 HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT),
160 HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT),
161 HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
162 HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
163 HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x07, 0x01, HDA_INPUT),
164 HDA_CODEC_MUTE("Front Mic Playback Switch", 0x07, 0x01, HDA_INPUT),
165 { } /* end */
166 };
167
168 /* Fujitsu S702x series laptops. ALC260 pin usage: Mic/Line jack = 0x12,
169 * HP jack = 0x14, CD audio = 0x16, internal speaker = 0x10.
170 */
171 static const struct snd_kcontrol_new alc260_fujitsu_mixer[] = {
172 HDA_CODEC_VOLUME("Headphone Playback Volume", 0x08, 0x0, HDA_OUTPUT),
173 HDA_BIND_MUTE("Headphone Playback Switch", 0x08, 2, HDA_INPUT),
174 ALC_PIN_MODE("Headphone Jack Mode", 0x14, ALC_PIN_DIR_INOUT),
175 HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
176 HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
177 HDA_CODEC_VOLUME("Mic/Line Playback Volume", 0x07, 0x0, HDA_INPUT),
178 HDA_CODEC_MUTE("Mic/Line Playback Switch", 0x07, 0x0, HDA_INPUT),
179 ALC_PIN_MODE("Mic/Line Jack Mode", 0x12, ALC_PIN_DIR_IN),
180 HDA_CODEC_VOLUME("Speaker Playback Volume", 0x09, 0x0, HDA_OUTPUT),
181 HDA_BIND_MUTE("Speaker Playback Switch", 0x09, 2, HDA_INPUT),
182 { } /* end */
183 };
184
185 /* Mixer for Acer TravelMate(/Extensa/Aspire) notebooks. Note that current
186 * versions of the ALC260 don't act on requests to enable mic bias from NID
187 * 0x0f (used to drive the headphone jack in these laptops). The ALC260
188 * datasheet doesn't mention this restriction. At this stage it's not clear
189 * whether this behaviour is intentional or is a hardware bug in chip
190 * revisions available in early 2006. Therefore for now allow the
191 * "Headphone Jack Mode" control to span all choices, but if it turns out
192 * that the lack of mic bias for this NID is intentional we could change the
193 * mode from ALC_PIN_DIR_INOUT to ALC_PIN_DIR_INOUT_NOMICBIAS.
194 *
195 * In addition, Acer TravelMate(/Extensa/Aspire) notebooks in early 2006
196 * don't appear to make the mic bias available from the "line" jack, even
197 * though the NID used for this jack (0x14) can supply it. The theory is
198 * that perhaps Acer have included blocking capacitors between the ALC260
199 * and the output jack. If this turns out to be the case for all such
200 * models the "Line Jack Mode" mode could be changed from ALC_PIN_DIR_INOUT
201 * to ALC_PIN_DIR_INOUT_NOMICBIAS.
202 *
203 * The C20x Tablet series have a mono internal speaker which is controlled
204 * via the chip's Mono sum widget and pin complex, so include the necessary
205 * controls for such models. On models without a "mono speaker" the control
206 * won't do anything.
207 */
208 static const struct snd_kcontrol_new alc260_acer_mixer[] = {
209 HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT),
210 HDA_BIND_MUTE("Master Playback Switch", 0x08, 2, HDA_INPUT),
211 ALC_PIN_MODE("Headphone Jack Mode", 0x0f, ALC_PIN_DIR_INOUT),
212 HDA_CODEC_VOLUME_MONO("Speaker Playback Volume", 0x0a, 1, 0x0,
213 HDA_OUTPUT),
214 HDA_BIND_MUTE_MONO("Speaker Playback Switch", 0x0a, 1, 2,
215 HDA_INPUT),
216 HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
217 HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
218 HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
219 HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
220 ALC_PIN_MODE("Mic Jack Mode", 0x12, ALC_PIN_DIR_IN),
221 HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT),
222 HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT),
223 ALC_PIN_MODE("Line Jack Mode", 0x14, ALC_PIN_DIR_INOUT),
224 { } /* end */
225 };
226
227 /* Maxdata Favorit 100XS: one output and one input (0x12) jack
228 */
229 static const struct snd_kcontrol_new alc260_favorit100_mixer[] = {
230 HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT),
231 HDA_BIND_MUTE("Master Playback Switch", 0x08, 2, HDA_INPUT),
232 ALC_PIN_MODE("Output Jack Mode", 0x0f, ALC_PIN_DIR_INOUT),
233 HDA_CODEC_VOLUME("Line/Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
234 HDA_CODEC_MUTE("Line/Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
235 ALC_PIN_MODE("Line/Mic Jack Mode", 0x12, ALC_PIN_DIR_IN),
236 { } /* end */
237 };
238
239 /* Packard bell V7900 ALC260 pin usage: HP = 0x0f, Mic jack = 0x12,
240 * Line In jack = 0x14, CD audio = 0x16, pc beep = 0x17.
241 */
242 static const struct snd_kcontrol_new alc260_will_mixer[] = {
243 HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT),
244 HDA_BIND_MUTE("Master Playback Switch", 0x08, 0x2, HDA_INPUT),
245 HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
246 HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
247 ALC_PIN_MODE("Mic Jack Mode", 0x12, ALC_PIN_DIR_IN),
248 HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT),
249 HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT),
250 ALC_PIN_MODE("Line Jack Mode", 0x14, ALC_PIN_DIR_INOUT),
251 HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
252 HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
253 { } /* end */
254 };
255
256 /* Replacer 672V ALC260 pin usage: Mic jack = 0x12,
257 * Line In jack = 0x14, ATAPI Mic = 0x13, speaker = 0x0f.
258 */
259 static const struct snd_kcontrol_new alc260_replacer_672v_mixer[] = {
260 HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT),
261 HDA_BIND_MUTE("Master Playback Switch", 0x08, 0x2, HDA_INPUT),
262 HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
263 HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
264 ALC_PIN_MODE("Mic Jack Mode", 0x12, ALC_PIN_DIR_IN),
265 HDA_CODEC_VOLUME("ATAPI Mic Playback Volume", 0x07, 0x1, HDA_INPUT),
266 HDA_CODEC_MUTE("ATATI Mic Playback Switch", 0x07, 0x1, HDA_INPUT),
267 HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT),
268 HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT),
269 ALC_PIN_MODE("Line Jack Mode", 0x14, ALC_PIN_DIR_INOUT),
270 { } /* end */
271 };
272
273 /*
274 * initialization verbs
275 */
276 static const struct hda_verb alc260_init_verbs[] = {
277 /* Line In pin widget for input */
278 {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
279 /* CD pin widget for input */
280 {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
281 /* Mic1 (rear panel) pin widget for input and vref at 80% */
282 {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
283 /* Mic2 (front panel) pin widget for input and vref at 80% */
284 {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
285 /* LINE-2 is used for line-out in rear */
286 {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
287 /* select line-out */
288 {0x0e, AC_VERB_SET_CONNECT_SEL, 0x00},
289 /* LINE-OUT pin */
290 {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
291 /* enable HP */
292 {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
293 /* enable Mono */
294 {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
295 /* mute capture amp left and right */
296 {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
297 /* set connection select to line in (default select for this ADC) */
298 {0x04, AC_VERB_SET_CONNECT_SEL, 0x02},
299 /* mute capture amp left and right */
300 {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
301 /* set connection select to line in (default select for this ADC) */
302 {0x05, AC_VERB_SET_CONNECT_SEL, 0x02},
303 /* set vol=0 Line-Out mixer amp left and right */
304 {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
305 /* unmute pin widget amp left and right (no gain on this amp) */
306 {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
307 /* set vol=0 HP mixer amp left and right */
308 {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
309 /* unmute pin widget amp left and right (no gain on this amp) */
310 {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
311 /* set vol=0 Mono mixer amp left and right */
312 {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
313 /* unmute pin widget amp left and right (no gain on this amp) */
314 {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
315 /* unmute LINE-2 out pin */
316 {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
317 /* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 &
318 * Line In 2 = 0x03
319 */
320 /* mute analog inputs */
321 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
322 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
323 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
324 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
325 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
326 /* Amp Indexes: DAC = 0x01 & mixer = 0x00 */
327 /* mute Front out path */
328 {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
329 {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
330 /* mute Headphone out path */
331 {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
332 {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
333 /* mute Mono out path */
334 {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
335 {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
336 { }
337 };
338
339 /* Initialisation sequence for ALC260 as configured in Fujitsu S702x
340 * laptops. ALC260 pin usage: Mic/Line jack = 0x12, HP jack = 0x14, CD
341 * audio = 0x16, internal speaker = 0x10.
342 */
343 static const struct hda_verb alc260_fujitsu_init_verbs[] = {
344 /* Disable all GPIOs */
345 {0x01, AC_VERB_SET_GPIO_MASK, 0},
346 /* Internal speaker is connected to headphone pin */
347 {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
348 /* Headphone/Line-out jack connects to Line1 pin; make it an output */
349 {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
350 /* Mic/Line-in jack is connected to mic1 pin, so make it an input */
351 {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
352 /* Ensure all other unused pins are disabled and muted. */
353 {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
354 {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
355 {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
356 {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
357 {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
358 {0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
359 {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
360 {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
361
362 /* Disable digital (SPDIF) pins */
363 {0x03, AC_VERB_SET_DIGI_CONVERT_1, 0},
364 {0x06, AC_VERB_SET_DIGI_CONVERT_1, 0},
365
366 /* Ensure Line1 pin widget takes its input from the OUT1 sum bus
367 * when acting as an output.
368 */
369 {0x0d, AC_VERB_SET_CONNECT_SEL, 0},
370
371 /* Start with output sum widgets muted and their output gains at min */
372 {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
373 {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
374 {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
375 {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
376 {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
377 {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
378 {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
379 {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
380 {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
381
382 /* Unmute HP pin widget amp left and right (no equiv mixer ctrl) */
383 {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
384 /* Unmute Line1 pin widget output buffer since it starts as an output.
385 * If the pin mode is changed by the user the pin mode control will
386 * take care of enabling the pin's input/output buffers as needed.
387 * Therefore there's no need to enable the input buffer at this
388 * stage.
389 */
390 {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
391 /* Unmute input buffer of pin widget used for Line-in (no equiv
392 * mixer ctrl)
393 */
394 {0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
395
396 /* Mute capture amp left and right */
397 {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
398 /* Set ADC connection select to match default mixer setting - line
399 * in (on mic1 pin)
400 */
401 {0x04, AC_VERB_SET_CONNECT_SEL, 0x00},
402
403 /* Do the same for the second ADC: mute capture input amp and
404 * set ADC connection to line in (on mic1 pin)
405 */
406 {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
407 {0x05, AC_VERB_SET_CONNECT_SEL, 0x00},
408
409 /* Mute all inputs to mixer widget (even unconnected ones) */
410 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */
411 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */
412 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */
413 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */
414 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */
415 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */
416 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */
417 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */
418
419 { }
420 };
421
422 /* Initialisation sequence for ALC260 as configured in Acer TravelMate and
423 * similar laptops (adapted from Fujitsu init verbs).
424 */
425 static const struct hda_verb alc260_acer_init_verbs[] = {
426 /* On TravelMate laptops, GPIO 0 enables the internal speaker and
427 * the headphone jack. Turn this on and rely on the standard mute
428 * methods whenever the user wants to turn these outputs off.
429 */
430 {0x01, AC_VERB_SET_GPIO_MASK, 0x01},
431 {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01},
432 {0x01, AC_VERB_SET_GPIO_DATA, 0x01},
433 /* Internal speaker/Headphone jack is connected to Line-out pin */
434 {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
435 /* Internal microphone/Mic jack is connected to Mic1 pin */
436 {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50},
437 /* Line In jack is connected to Line1 pin */
438 {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
439 /* Some Acers (eg: C20x Tablets) use Mono pin for internal speaker */
440 {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
441 /* Ensure all other unused pins are disabled and muted. */
442 {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
443 {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
444 {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
445 {0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
446 {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
447 {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
448 /* Disable digital (SPDIF) pins */
449 {0x03, AC_VERB_SET_DIGI_CONVERT_1, 0},
450 {0x06, AC_VERB_SET_DIGI_CONVERT_1, 0},
451
452 /* Ensure Mic1 and Line1 pin widgets take input from the OUT1 sum
453 * bus when acting as outputs.
454 */
455 {0x0b, AC_VERB_SET_CONNECT_SEL, 0},
456 {0x0d, AC_VERB_SET_CONNECT_SEL, 0},
457
458 /* Start with output sum widgets muted and their output gains at min */
459 {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
460 {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
461 {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
462 {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
463 {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
464 {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
465 {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
466 {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
467 {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
468
469 /* Unmute Line-out pin widget amp left and right
470 * (no equiv mixer ctrl)
471 */
472 {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
473 /* Unmute mono pin widget amp output (no equiv mixer ctrl) */
474 {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
475 /* Unmute Mic1 and Line1 pin widget input buffers since they start as
476 * inputs. If the pin mode is changed by the user the pin mode control
477 * will take care of enabling the pin's input/output buffers as needed.
478 * Therefore there's no need to enable the input buffer at this
479 * stage.
480 */
481 {0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
482 {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
483
484 /* Mute capture amp left and right */
485 {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
486 /* Set ADC connection select to match default mixer setting - mic
487 * (on mic1 pin)
488 */
489 {0x04, AC_VERB_SET_CONNECT_SEL, 0x00},
490
491 /* Do similar with the second ADC: mute capture input amp and
492 * set ADC connection to mic to match ALSA's default state.
493 */
494 {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
495 {0x05, AC_VERB_SET_CONNECT_SEL, 0x00},
496
497 /* Mute all inputs to mixer widget (even unconnected ones) */
498 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */
499 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */
500 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */
501 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */
502 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */
503 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */
504 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */
505 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */
506
507 { }
508 };
509
510 /* Initialisation sequence for Maxdata Favorit 100XS
511 * (adapted from Acer init verbs).
512 */
513 static const struct hda_verb alc260_favorit100_init_verbs[] = {
514 /* GPIO 0 enables the output jack.
515 * Turn this on and rely on the standard mute
516 * methods whenever the user wants to turn these outputs off.
517 */
518 {0x01, AC_VERB_SET_GPIO_MASK, 0x01},
519 {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01},
520 {0x01, AC_VERB_SET_GPIO_DATA, 0x01},
521 /* Line/Mic input jack is connected to Mic1 pin */
522 {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50},
523 /* Ensure all other unused pins are disabled and muted. */
524 {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
525 {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
526 {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
527 {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
528 {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
529 {0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
530 {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
531 {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
532 {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
533 {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
534 /* Disable digital (SPDIF) pins */
535 {0x03, AC_VERB_SET_DIGI_CONVERT_1, 0},
536 {0x06, AC_VERB_SET_DIGI_CONVERT_1, 0},
537
538 /* Ensure Mic1 and Line1 pin widgets take input from the OUT1 sum
539 * bus when acting as outputs.
540 */
541 {0x0b, AC_VERB_SET_CONNECT_SEL, 0},
542 {0x0d, AC_VERB_SET_CONNECT_SEL, 0},
543
544 /* Start with output sum widgets muted and their output gains at min */
545 {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
546 {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
547 {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
548 {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
549 {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
550 {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
551 {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
552 {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
553 {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
554
555 /* Unmute Line-out pin widget amp left and right
556 * (no equiv mixer ctrl)
557 */
558 {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
559 /* Unmute Mic1 and Line1 pin widget input buffers since they start as
560 * inputs. If the pin mode is changed by the user the pin mode control
561 * will take care of enabling the pin's input/output buffers as needed.
562 * Therefore there's no need to enable the input buffer at this
563 * stage.
564 */
565 {0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
566
567 /* Mute capture amp left and right */
568 {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
569 /* Set ADC connection select to match default mixer setting - mic
570 * (on mic1 pin)
571 */
572 {0x04, AC_VERB_SET_CONNECT_SEL, 0x00},
573
574 /* Do similar with the second ADC: mute capture input amp and
575 * set ADC connection to mic to match ALSA's default state.
576 */
577 {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
578 {0x05, AC_VERB_SET_CONNECT_SEL, 0x00},
579
580 /* Mute all inputs to mixer widget (even unconnected ones) */
581 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */
582 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */
583 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */
584 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */
585 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */
586 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */
587 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */
588 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */
589
590 { }
591 };
592
593 static const struct hda_verb alc260_will_verbs[] = {
594 {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
595 {0x0b, AC_VERB_SET_CONNECT_SEL, 0x00},
596 {0x0d, AC_VERB_SET_CONNECT_SEL, 0x00},
597 {0x0f, AC_VERB_SET_EAPD_BTLENABLE, 0x02},
598 {0x1a, AC_VERB_SET_COEF_INDEX, 0x07},
599 {0x1a, AC_VERB_SET_PROC_COEF, 0x3040},
600 {}
601 };
602
603 static const struct hda_verb alc260_replacer_672v_verbs[] = {
604 {0x0f, AC_VERB_SET_EAPD_BTLENABLE, 0x02},
605 {0x1a, AC_VERB_SET_COEF_INDEX, 0x07},
606 {0x1a, AC_VERB_SET_PROC_COEF, 0x3050},
607
608 {0x01, AC_VERB_SET_GPIO_MASK, 0x01},
609 {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01},
610 {0x01, AC_VERB_SET_GPIO_DATA, 0x00},
611
612 {0x0f, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
613 {}
614 };
615
616 /* toggle speaker-output according to the hp-jack state */
alc260_replacer_672v_automute(struct hda_codec * codec)617 static void alc260_replacer_672v_automute(struct hda_codec *codec)
618 {
619 unsigned int present;
620
621 /* speaker --> GPIO Data 0, hp or spdif --> GPIO data 1 */
622 present = snd_hda_jack_detect(codec, 0x0f);
623 if (present) {
624 snd_hda_codec_write_cache(codec, 0x01, 0,
625 AC_VERB_SET_GPIO_DATA, 1);
626 snd_hda_codec_write_cache(codec, 0x0f, 0,
627 AC_VERB_SET_PIN_WIDGET_CONTROL,
628 PIN_HP);
629 } else {
630 snd_hda_codec_write_cache(codec, 0x01, 0,
631 AC_VERB_SET_GPIO_DATA, 0);
632 snd_hda_codec_write_cache(codec, 0x0f, 0,
633 AC_VERB_SET_PIN_WIDGET_CONTROL,
634 PIN_OUT);
635 }
636 }
637
alc260_replacer_672v_unsol_event(struct hda_codec * codec,unsigned int res)638 static void alc260_replacer_672v_unsol_event(struct hda_codec *codec,
639 unsigned int res)
640 {
641 if ((res >> 26) == ALC_HP_EVENT)
642 alc260_replacer_672v_automute(codec);
643 }
644
645 static const struct hda_verb alc260_hp_dc7600_verbs[] = {
646 {0x05, AC_VERB_SET_CONNECT_SEL, 0x01},
647 {0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
648 {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
649 {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
650 {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
651 {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
652 {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
653 {0x10, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
654 {0x11, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
655 {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
656 {}
657 };
658
659 /* Test configuration for debugging, modelled after the ALC880 test
660 * configuration.
661 */
662 #ifdef CONFIG_SND_DEBUG
663 static const hda_nid_t alc260_test_dac_nids[1] = {
664 0x02,
665 };
666 static const hda_nid_t alc260_test_adc_nids[2] = {
667 0x04, 0x05,
668 };
669 /* For testing the ALC260, each input MUX needs its own definition since
670 * the signal assignments are different. This assumes that the first ADC
671 * is NID 0x04.
672 */
673 static const struct hda_input_mux alc260_test_capture_sources[2] = {
674 {
675 .num_items = 7,
676 .items = {
677 { "MIC1 pin", 0x0 },
678 { "MIC2 pin", 0x1 },
679 { "LINE1 pin", 0x2 },
680 { "LINE2 pin", 0x3 },
681 { "CD pin", 0x4 },
682 { "LINE-OUT pin", 0x5 },
683 { "HP-OUT pin", 0x6 },
684 },
685 },
686 {
687 .num_items = 8,
688 .items = {
689 { "MIC1 pin", 0x0 },
690 { "MIC2 pin", 0x1 },
691 { "LINE1 pin", 0x2 },
692 { "LINE2 pin", 0x3 },
693 { "CD pin", 0x4 },
694 { "Mixer", 0x5 },
695 { "LINE-OUT pin", 0x6 },
696 { "HP-OUT pin", 0x7 },
697 },
698 },
699 };
700 static const struct snd_kcontrol_new alc260_test_mixer[] = {
701 /* Output driver widgets */
702 HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT),
703 HDA_BIND_MUTE_MONO("Mono Playback Switch", 0x0a, 1, 2, HDA_INPUT),
704 HDA_CODEC_VOLUME("LOUT2 Playback Volume", 0x09, 0x0, HDA_OUTPUT),
705 HDA_BIND_MUTE("LOUT2 Playback Switch", 0x09, 2, HDA_INPUT),
706 HDA_CODEC_VOLUME("LOUT1 Playback Volume", 0x08, 0x0, HDA_OUTPUT),
707 HDA_BIND_MUTE("LOUT1 Playback Switch", 0x08, 2, HDA_INPUT),
708
709 /* Modes for retasking pin widgets
710 * Note: the ALC260 doesn't seem to act on requests to enable mic
711 * bias from NIDs 0x0f and 0x10. The ALC260 datasheet doesn't
712 * mention this restriction. At this stage it's not clear whether
713 * this behaviour is intentional or is a hardware bug in chip
714 * revisions available at least up until early 2006. Therefore for
715 * now allow the "HP-OUT" and "LINE-OUT" Mode controls to span all
716 * choices, but if it turns out that the lack of mic bias for these
717 * NIDs is intentional we could change their modes from
718 * ALC_PIN_DIR_INOUT to ALC_PIN_DIR_INOUT_NOMICBIAS.
719 */
720 ALC_PIN_MODE("HP-OUT pin mode", 0x10, ALC_PIN_DIR_INOUT),
721 ALC_PIN_MODE("LINE-OUT pin mode", 0x0f, ALC_PIN_DIR_INOUT),
722 ALC_PIN_MODE("LINE2 pin mode", 0x15, ALC_PIN_DIR_INOUT),
723 ALC_PIN_MODE("LINE1 pin mode", 0x14, ALC_PIN_DIR_INOUT),
724 ALC_PIN_MODE("MIC2 pin mode", 0x13, ALC_PIN_DIR_INOUT),
725 ALC_PIN_MODE("MIC1 pin mode", 0x12, ALC_PIN_DIR_INOUT),
726
727 /* Loopback mixer controls */
728 HDA_CODEC_VOLUME("MIC1 Playback Volume", 0x07, 0x00, HDA_INPUT),
729 HDA_CODEC_MUTE("MIC1 Playback Switch", 0x07, 0x00, HDA_INPUT),
730 HDA_CODEC_VOLUME("MIC2 Playback Volume", 0x07, 0x01, HDA_INPUT),
731 HDA_CODEC_MUTE("MIC2 Playback Switch", 0x07, 0x01, HDA_INPUT),
732 HDA_CODEC_VOLUME("LINE1 Playback Volume", 0x07, 0x02, HDA_INPUT),
733 HDA_CODEC_MUTE("LINE1 Playback Switch", 0x07, 0x02, HDA_INPUT),
734 HDA_CODEC_VOLUME("LINE2 Playback Volume", 0x07, 0x03, HDA_INPUT),
735 HDA_CODEC_MUTE("LINE2 Playback Switch", 0x07, 0x03, HDA_INPUT),
736 HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
737 HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
738 HDA_CODEC_VOLUME("LINE-OUT loopback Playback Volume", 0x07, 0x06, HDA_INPUT),
739 HDA_CODEC_MUTE("LINE-OUT loopback Playback Switch", 0x07, 0x06, HDA_INPUT),
740 HDA_CODEC_VOLUME("HP-OUT loopback Playback Volume", 0x07, 0x7, HDA_INPUT),
741 HDA_CODEC_MUTE("HP-OUT loopback Playback Switch", 0x07, 0x7, HDA_INPUT),
742
743 /* Controls for GPIO pins, assuming they are configured as outputs */
744 ALC_GPIO_DATA_SWITCH("GPIO pin 0", 0x01, 0x01),
745 ALC_GPIO_DATA_SWITCH("GPIO pin 1", 0x01, 0x02),
746 ALC_GPIO_DATA_SWITCH("GPIO pin 2", 0x01, 0x04),
747 ALC_GPIO_DATA_SWITCH("GPIO pin 3", 0x01, 0x08),
748
749 /* Switches to allow the digital IO pins to be enabled. The datasheet
750 * is ambigious as to which NID is which; testing on laptops which
751 * make this output available should provide clarification.
752 */
753 ALC_SPDIF_CTRL_SWITCH("SPDIF Playback Switch", 0x03, 0x01),
754 ALC_SPDIF_CTRL_SWITCH("SPDIF Capture Switch", 0x06, 0x01),
755
756 /* A switch allowing EAPD to be enabled. Some laptops seem to use
757 * this output to turn on an external amplifier.
758 */
759 ALC_EAPD_CTRL_SWITCH("LINE-OUT EAPD Enable Switch", 0x0f, 0x02),
760 ALC_EAPD_CTRL_SWITCH("HP-OUT EAPD Enable Switch", 0x10, 0x02),
761
762 { } /* end */
763 };
764 static const struct hda_verb alc260_test_init_verbs[] = {
765 /* Enable all GPIOs as outputs with an initial value of 0 */
766 {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x0f},
767 {0x01, AC_VERB_SET_GPIO_DATA, 0x00},
768 {0x01, AC_VERB_SET_GPIO_MASK, 0x0f},
769
770 /* Enable retasking pins as output, initially without power amp */
771 {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
772 {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
773 {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
774 {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
775 {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
776 {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
777
778 /* Disable digital (SPDIF) pins initially, but users can enable
779 * them via a mixer switch. In the case of SPDIF-out, this initverb
780 * payload also sets the generation to 0, output to be in "consumer"
781 * PCM format, copyright asserted, no pre-emphasis and no validity
782 * control.
783 */
784 {0x03, AC_VERB_SET_DIGI_CONVERT_1, 0},
785 {0x06, AC_VERB_SET_DIGI_CONVERT_1, 0},
786
787 /* Ensure mic1, mic2, line1 and line2 pin widgets take input from the
788 * OUT1 sum bus when acting as an output.
789 */
790 {0x0b, AC_VERB_SET_CONNECT_SEL, 0},
791 {0x0c, AC_VERB_SET_CONNECT_SEL, 0},
792 {0x0d, AC_VERB_SET_CONNECT_SEL, 0},
793 {0x0e, AC_VERB_SET_CONNECT_SEL, 0},
794
795 /* Start with output sum widgets muted and their output gains at min */
796 {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
797 {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
798 {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
799 {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
800 {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
801 {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
802 {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
803 {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
804 {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
805
806 /* Unmute retasking pin widget output buffers since the default
807 * state appears to be output. As the pin mode is changed by the
808 * user the pin mode control will take care of enabling the pin's
809 * input/output buffers as needed.
810 */
811 {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
812 {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
813 {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
814 {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
815 {0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
816 {0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
817 /* Also unmute the mono-out pin widget */
818 {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
819
820 /* Mute capture amp left and right */
821 {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
822 /* Set ADC connection select to match default mixer setting (mic1
823 * pin)
824 */
825 {0x04, AC_VERB_SET_CONNECT_SEL, 0x00},
826
827 /* Do the same for the second ADC: mute capture input amp and
828 * set ADC connection to mic1 pin
829 */
830 {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
831 {0x05, AC_VERB_SET_CONNECT_SEL, 0x00},
832
833 /* Mute all inputs to mixer widget (even unconnected ones) */
834 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */
835 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */
836 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */
837 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */
838 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */
839 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */
840 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */
841 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */
842
843 { }
844 };
845 #endif
846
847 /*
848 * ALC260 configurations
849 */
850 static const char * const alc260_models[ALC260_MODEL_LAST] = {
851 [ALC260_BASIC] = "basic",
852 [ALC260_FUJITSU_S702X] = "fujitsu",
853 [ALC260_ACER] = "acer",
854 [ALC260_WILL] = "will",
855 [ALC260_REPLACER_672V] = "replacer",
856 [ALC260_FAVORIT100] = "favorit100",
857 #ifdef CONFIG_SND_DEBUG
858 [ALC260_TEST] = "test",
859 #endif
860 [ALC260_AUTO] = "auto",
861 };
862
863 static const struct snd_pci_quirk alc260_cfg_tbl[] = {
864 SND_PCI_QUIRK(0x1025, 0x007b, "Acer C20x", ALC260_ACER),
865 SND_PCI_QUIRK(0x1025, 0x007f, "Acer", ALC260_WILL),
866 SND_PCI_QUIRK(0x1025, 0x008f, "Acer", ALC260_ACER),
867 SND_PCI_QUIRK(0x1509, 0x4540, "Favorit 100XS", ALC260_FAVORIT100),
868 SND_PCI_QUIRK(0x104d, 0x81bb, "Sony VAIO", ALC260_BASIC),
869 SND_PCI_QUIRK(0x104d, 0x81cc, "Sony VAIO", ALC260_BASIC),
870 SND_PCI_QUIRK(0x104d, 0x81cd, "Sony VAIO", ALC260_BASIC),
871 SND_PCI_QUIRK(0x10cf, 0x1326, "Fujitsu S702X", ALC260_FUJITSU_S702X),
872 SND_PCI_QUIRK(0x152d, 0x0729, "CTL U553W", ALC260_BASIC),
873 SND_PCI_QUIRK(0x161f, 0x2057, "Replacer 672V", ALC260_REPLACER_672V),
874 SND_PCI_QUIRK(0x1631, 0xc017, "PB V7900", ALC260_WILL),
875 {}
876 };
877
878 static const struct alc_config_preset alc260_presets[] = {
879 [ALC260_BASIC] = {
880 .mixers = { alc260_base_output_mixer,
881 alc260_input_mixer },
882 .init_verbs = { alc260_init_verbs },
883 .num_dacs = ARRAY_SIZE(alc260_dac_nids),
884 .dac_nids = alc260_dac_nids,
885 .num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids),
886 .adc_nids = alc260_dual_adc_nids,
887 .num_channel_mode = ARRAY_SIZE(alc260_modes),
888 .channel_mode = alc260_modes,
889 .input_mux = &alc260_capture_source,
890 },
891 [ALC260_FUJITSU_S702X] = {
892 .mixers = { alc260_fujitsu_mixer },
893 .init_verbs = { alc260_fujitsu_init_verbs },
894 .num_dacs = ARRAY_SIZE(alc260_dac_nids),
895 .dac_nids = alc260_dac_nids,
896 .num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids),
897 .adc_nids = alc260_dual_adc_nids,
898 .num_channel_mode = ARRAY_SIZE(alc260_modes),
899 .channel_mode = alc260_modes,
900 .num_mux_defs = ARRAY_SIZE(alc260_fujitsu_capture_sources),
901 .input_mux = alc260_fujitsu_capture_sources,
902 },
903 [ALC260_ACER] = {
904 .mixers = { alc260_acer_mixer },
905 .init_verbs = { alc260_acer_init_verbs },
906 .num_dacs = ARRAY_SIZE(alc260_dac_nids),
907 .dac_nids = alc260_dac_nids,
908 .num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids),
909 .adc_nids = alc260_dual_adc_nids,
910 .num_channel_mode = ARRAY_SIZE(alc260_modes),
911 .channel_mode = alc260_modes,
912 .num_mux_defs = ARRAY_SIZE(alc260_acer_capture_sources),
913 .input_mux = alc260_acer_capture_sources,
914 },
915 [ALC260_FAVORIT100] = {
916 .mixers = { alc260_favorit100_mixer },
917 .init_verbs = { alc260_favorit100_init_verbs },
918 .num_dacs = ARRAY_SIZE(alc260_dac_nids),
919 .dac_nids = alc260_dac_nids,
920 .num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids),
921 .adc_nids = alc260_dual_adc_nids,
922 .num_channel_mode = ARRAY_SIZE(alc260_modes),
923 .channel_mode = alc260_modes,
924 .num_mux_defs = ARRAY_SIZE(alc260_favorit100_capture_sources),
925 .input_mux = alc260_favorit100_capture_sources,
926 },
927 [ALC260_WILL] = {
928 .mixers = { alc260_will_mixer },
929 .init_verbs = { alc260_init_verbs, alc260_will_verbs },
930 .num_dacs = ARRAY_SIZE(alc260_dac_nids),
931 .dac_nids = alc260_dac_nids,
932 .num_adc_nids = ARRAY_SIZE(alc260_adc_nids),
933 .adc_nids = alc260_adc_nids,
934 .dig_out_nid = ALC260_DIGOUT_NID,
935 .num_channel_mode = ARRAY_SIZE(alc260_modes),
936 .channel_mode = alc260_modes,
937 .input_mux = &alc260_capture_source,
938 },
939 [ALC260_REPLACER_672V] = {
940 .mixers = { alc260_replacer_672v_mixer },
941 .init_verbs = { alc260_init_verbs, alc260_replacer_672v_verbs },
942 .num_dacs = ARRAY_SIZE(alc260_dac_nids),
943 .dac_nids = alc260_dac_nids,
944 .num_adc_nids = ARRAY_SIZE(alc260_adc_nids),
945 .adc_nids = alc260_adc_nids,
946 .dig_out_nid = ALC260_DIGOUT_NID,
947 .num_channel_mode = ARRAY_SIZE(alc260_modes),
948 .channel_mode = alc260_modes,
949 .input_mux = &alc260_capture_source,
950 .unsol_event = alc260_replacer_672v_unsol_event,
951 .init_hook = alc260_replacer_672v_automute,
952 },
953 #ifdef CONFIG_SND_DEBUG
954 [ALC260_TEST] = {
955 .mixers = { alc260_test_mixer },
956 .init_verbs = { alc260_test_init_verbs },
957 .num_dacs = ARRAY_SIZE(alc260_test_dac_nids),
958 .dac_nids = alc260_test_dac_nids,
959 .num_adc_nids = ARRAY_SIZE(alc260_test_adc_nids),
960 .adc_nids = alc260_test_adc_nids,
961 .num_channel_mode = ARRAY_SIZE(alc260_modes),
962 .channel_mode = alc260_modes,
963 .num_mux_defs = ARRAY_SIZE(alc260_test_capture_sources),
964 .input_mux = alc260_test_capture_sources,
965 },
966 #endif
967 };
968
969