| /linux-6.15/drivers/clk/davinci/ |
| D | da8xx-cfgchip.c | 358 struct da8xx_usb0_clk48 *usb0 = to_da8xx_usb0_clk48(hw); in da8xx_usb0_clk48_prepare() local
364 return clk_prepare(usb0->fck); in da8xx_usb0_clk48_prepare()
369 struct da8xx_usb0_clk48 *usb0 = to_da8xx_usb0_clk48(hw); in da8xx_usb0_clk48_unprepare() local
371 clk_unprepare(usb0->fck); in da8xx_usb0_clk48_unprepare()
376 struct da8xx_usb0_clk48 *usb0 = to_da8xx_usb0_clk48(hw); in da8xx_usb0_clk48_enable() local
383 clk_enable(usb0->fck); in da8xx_usb0_clk48_enable()
391 regmap_write_bits(usb0->regmap, CFGCHIP(2), mask, val); in da8xx_usb0_clk48_enable()
392 ret = regmap_read_poll_timeout(usb0->regmap, CFGCHIP(2), val, in da8xx_usb0_clk48_enable()
395 clk_disable(usb0->fck); in da8xx_usb0_clk48_enable()
402 struct da8xx_usb0_clk48 *usb0 = to_da8xx_usb0_clk48(hw); in da8xx_usb0_clk48_disable() local
[all …]
|
| /linux-6.15/Documentation/sound/designs/ |
| D | midi-2.0.rst | 429 % mkdir functions/midi2.usb0
446 % echo "ACMESynth" > functions/midi2.usb0/iface_name
447 % echo "ACMESynth" > functions/midi2.usb0/ep.0/ep_name
448 % echo "ABCD12345" > functions/midi2.usb0/ep.0/product_id
449 % echo 0x0123 > functions/midi2.usb0/ep.0/family
450 % echo 0x4567 > functions/midi2.usb0/ep.0/model
451 % echo 0x123456 > functions/midi2.usb0/ep.0/manufacturer
452 % echo 0x12345678 > functions/midi2.usb0/ep.0/sw_revision
456 % echo 2 > functions/midi2.usb0/ep.0/protocol
461 % echo "Monosynth" > functions/midi2.usb0/ep.0/block.0/name
[all …]
|
| /linux-6.15/Documentation/usb/ |
| D | gadget_configfs.rst | 144 $ mkdir functions/ncm.usb0 # usb_f_ncm.ko gets loaded with request_module()
168 $ ln -s functions/ncm.usb0 configs/c.1
190 ./configs/c.1/ncm.usb0 -> ../../../../usb_gadget/g1/functions/ncm.usb0
197 ./functions/ncm.usb0
198 ./functions/ncm.usb0/ifname
199 ./functions/ncm.usb0/qmult
200 ./functions/ncm.usb0/host_addr
201 ./functions/ncm.usb0/dev_addr
243 $ rm configs/c.1/ncm.usb0
279 $ rmdir functions/ncm.usb0
|
| /linux-6.15/arch/arm/boot/dts/socionext/ |
| D | uniphier-pinctrl.dtsi | 194 pinctrl_usb0: usb0 {
195 groups = "usb0";
196 function = "usb0";
199 pinctrl_usb0_device: usb0-device {
201 function = "usb0";
|
| /linux-6.15/arch/arm/boot/dts/xilinx/ |
| D | zynq-microzed.dts | 64 &usb0 {
73 pinctrl_usb0_default: usb0-default {
76 function = "usb0";
|
| /linux-6.15/Documentation/devicetree/bindings/clock/ |
| D | mvebu-gated-clock.txt | 112 18 usb0 USB Host 0
129 18 usb0 USB Host 0
135 0 usb0 USB Host 0
160 3 usb0 USB Host 0
|
| /linux-6.15/arch/arm/mach-omap1/ |
| D | usb.c | 25 * for usb0/1/2 ports, covering basic mux and transceiver setup.
33 * - 5912 OSK OHCI (with usb0 standard-A), standard A-to-B cables
35 * - 1510 Innovator UDC with bundled usb0 cable
37 * - 1510 Innovator OHCI with custom usb0 cable, feeding 5V VBUS
89 pr_cont(", usb0 %d wires%s", config->pins[0], in omap_otg_init()
321 printk(KERN_ERR "no usb0 alt pin config on 15xx\n"); in omap1_usb0_init()
441 /* NOTE omap1 erratum: must leave USB2_UNI_R set if usb0 in use */ in omap1_usb2_init()
608 pr_cont(", usb0 %d wires%s", config->pins[0], in omap_1510_usb_init()
|
| /linux-6.15/arch/arm64/boot/dts/xilinx/ |
| D | zynqmp-zc1751-xm015-dc1.dts | 31 usb0 = &usb0;
187 pinctrl_usb0_default: usb0-default {
190 function = "usb0";
415 &usb0 {
|
| D | zynqmp-zc1751-xm017-dc3.dts | 28 usb0 = &usb0;
176 &usb0 {
|
| D | zynqmp-zcu104-revA.dts | 33 usb0 = &usb0;
405 pinctrl_usb0_default: usb0-default {
408 function = "usb0";
495 &usb0 {
|
| D | zynqmp-zcu104-revC.dts | 33 usb0 = &usb0;
417 pinctrl_usb0_default: usb0-default {
420 function = "usb0";
507 &usb0 {
|
| /linux-6.15/drivers/pinctrl/ |
| D | pinctrl-lpc18xx.c | 179 [FUNC_USB0] = "usb0",
245 LPC_P(1,3, GPIO, CTOUT, SGPIO, EMC, USB0, SSP1, R, SDMMC, 0, ND);
246 LPC_P(1,4, GPIO, CTOUT, SGPIO, EMC, USB0, SSP1, R, SDMMC, 0, ND);
247 LPC_P(1,5, GPIO, CTOUT, R, EMC, USB0, SSP1, SGPIO, SDMMC, 0, ND);
249 LPC_P(1,7, GPIO, UART1, CTOUT, EMC, USB0, R, R, R, 0, ND);
263 LPC_P(2,0, SGPIO, UART0, EMC, USB0, GPIO, R, TIMER3, ENET, 0, ND);
264 LPC_P(2,1, SGPIO, UART0, EMC, USB0, GPIO, R, TIMER3, R, 0, ND);
265 LPC_P(2,2, SGPIO, UART0, EMC, USB0, GPIO, CTIN, TIMER3, R, 0, ND);
266 LPC_P(2,3, SGPIO, I2C1, UART3, CTIN, GPIO, R, TIMER3, USB0, 0, HD);
267 LPC_P(2,4, SGPIO, I2C1, UART3, CTIN, GPIO, R, TIMER3, USB0, 0, HD);
[all …]
|
| /linux-6.15/arch/riscv/boot/dts/starfive/ |
| D | jh7110-milkv-mars.dts | 57 usb0_pins: usb0-0 {
70 &usb0 {
|
| D | jh7110-pine64-star64.dts | 84 usb0_pins: usb0-0 {
97 &usb0 {
|
| /linux-6.15/arch/arm64/boot/dts/ti/ |
| D | k3-am654-pcie-usb2.dtso | 40 usb0_pins_default: usb0-default-pins {
55 &usb0 {
|
| D | k3-am654-pcie-usb3.dtso | 29 usb0_pins_default: usb0-default-pins {
50 &usb0 {
|
| /linux-6.15/arch/arm/boot/dts/renesas/ |
| D | r8a7778-bockw.dts | 192 usb0_pins: usb0 {
193 groups = "usb0";
194 function = "usb0";
|
| D | r8a77470-iwg23s-sbc.dts | 229 usb0_pins: usb0 {
230 groups = "usb0";
231 function = "usb0";
|
| /linux-6.15/Documentation/devicetree/bindings/usb/ |
| D | fsl,usb2.yaml | 53 for MPC5121 USB0 only. Indicates the
59 for MPC5121 USB0 only. Indicates
|
| D | am33xx-usb.txt | 73 usb0 = &usb0;
102 usb0: usb@47401000 {
|
| /linux-6.15/arch/arm64/boot/dts/marvell/ |
| D | ac5-98dx35xx-rd.dts | 60 /* USB0 is a host USB */
61 &usb0 {
|
| /linux-6.15/arch/arm/boot/dts/microchip/ |
| D | at91-lmu5000.dts | 98 usb0 {
133 &usb0 {
|
| /linux-6.15/arch/powerpc/boot/dts/fsl/ |
| D | t102xsi-pre.dtsi | 57 usb0 = &usb0;
|
| D | b4420si-pre.dtsi | 54 usb0 = &usb0;
|
| /linux-6.15/arch/arm64/boot/dts/allwinner/ |
| D | sun50i-h5-nanopi-neo2.dts | 54 reg_usb0_vbus: usb0-vbus {
56 regulator-name = "usb0-vbus";
|