| /src/share/man/man4/ |
| H A D | mca.4 | 45 or tunable setting.
60 or tunable setting.
102 This setting enables a workaround for benign corrected parity errors which
118 This setting enables a workaround for Erratum 383 on AMD Family 10h CPUs.
165 If this setting is 0, no rate limit is applied.
181 setting.
199 This setting controls the size and behavior of the in-kernel cache of
202 If the setting is -1, the in-kernel cache grows without bounds and contains a
205 setting was changed.
206 If the setting is 0, the in-kernel cache is disabled.
[all …]
|
| H A D | cpufreq.4 | 104 This setting is also accessible via a tunable with the same name.
109 This setting is also accessible via a tunable with the same name.
163 and setting a new one from the list with
253 All the following elements for each setting should be returned:
260 device_t dev; /* Driver providing this setting. */
289 method takes a driver setting and makes it active.
290 If the setting is invalid or not currently available, it should return
295 method returns the currently-active driver setting.
301 If the driver cannot infer the current setting
|
| H A D | pvscsi.4 | 35 The default setting is 0.
44 setting to nonzero value enables the use of the PVSCSI message queue allowing
48 setting to nonzero value enables the use of MSI interrupts.
51 setting to nonzero value enables the use of MSI-X interrupts.
54 setting to nonzero value enables the request call threshold functionality.
|
| /src/crypto/krb5/src/windows/installer/wix/ |
| H A D | msi-deployment-guide.txt | 15 2.1.1 Setting Properties
123 controlled by setting the corresponding properties to the desired
144 use the property value to set the corresponding setting in the
148 For each property, the associated registry setting is referenced
158 2.1.1 Setting Properties
176 Setting: automatic generation of missing configuration files
180 Setting: automatic ticket renewal
186 Setting: default lifetime (minutes)
190 Setting: default renew till time (minutes)
194 Setting: default renewable tickets setting
[all …]
|
| /src/share/man/man5/ |
| H A D | src.conf.5 | 45 For instance, setting
88 variables are ignored regardless of their setting;
168 Setting
344 will be used, which can be overridden by setting
532 This is a default setting on
538 This is a default setting on
579 Setting
700 This is a default setting on
708 This is a default setting on
726 This is a default setting on
[all …]
|
| /src/sys/contrib/device-tree/Bindings/phy/ |
| H A D | apm-xgene-phy.txt | 9 - #phy-cells : Shall be 1 as it expects one argument for setting
19 Two set of 3-tuple setting for each (up to 3)
25 Two set of 3-tuple setting for each (up to 3)
28 gain control. Two set of 3-tuple setting for each
31 - apm,tx-amplitude : Amplitude control. Two set of 3-tuple setting for
36 3-tuple setting for each (up to 3) supported link
40 3-tuple setting for each (up to 3) supported link
44 3-tuple setting for Gen1, Gen2, and Gen3. Range is
57 NOTE: PHY override parameters are board specific setting.
|
| H A D | apm,xgene-phy.yaml | 35 automatic calibrated position. Two set of 3-tuple setting for each
53 sampling point. Two set of 3-tuple setting for each supported link speed
68 3-tuple setting for each supported link speed on the host. Range is
82 Amplitude control. Two set of 3-tuple setting for each supported link
97 1st pre-cursor emphasis taps control. Two set of 3-tuple setting for
113 2nd pre-cursor emphasis taps control. Two set of 3-tuple setting for
128 Post-cursor emphasis taps control. Two set of 3-tuple setting for Gen1,
|
| /src/contrib/pam-krb5/pam-util/ |
| H A D | options.c | 86 copy_default_list(struct pam_args *args, struct vector **setting, in copy_default_list() argument
91 *setting = NULL; in copy_default_list()
98 *setting = result; in copy_default_list()
111 default_list_string(struct pam_args *args, struct vector **setting, in default_list_string() argument
116 *setting = NULL; in default_list_string()
123 *setting = result; in default_list_string()
271 putil_err(args, "invalid number in krb5.conf setting for %s: %s", in default_number()
313 putil_err(args, "invalid time in krb5.conf setting for %s: %s", in default_time()
329 * allocation failed while parsing or while setting the default value, so we
514 convert_boolean(struct pam_args *args, const char *arg, bool *setting) in convert_boolean() argument
[all …]
|
| /src/contrib/llvm-project/lldb/bindings/interface/ |
| H A D | SBSymbolContextExtensions.i | 6 …tModule, SetModule, doc='''A read/write property that allows the getting/setting of the module (ll…
7 …it, SetCompileUnit, doc='''A read/write property that allows the getting/setting of the compile un…
8 …ction, SetFunction, doc='''A read/write property that allows the getting/setting of the function (…
9 …GetBlock, SetBlock, doc='''A read/write property that allows the getting/setting of the block (lld…
10 …tSymbol, SetSymbol, doc='''A read/write property that allows the getting/setting of the symbol (ll…
11 …ntry, SetLineEntry, doc='''A read/write property that allows the getting/setting of the line entry…
|
| /src/sys/contrib/device-tree/Bindings/leds/backlight/ |
| H A D | arcxcnn_bl.txt | 14 - arc,led-config-0: setting for register ILED_CONFIG_0
15 - arc,led-config-1: setting for register ILED_CONFIG_1
16 - arc,dim-freq: PWM mode frequence setting (bits [3:0] used)
17 - arc,comp-config: setting for register CONFIG_COMP
18 - arc,filter-config: setting for register FILTER_CONFIG
19 - arc,trim-config: setting for register IMAXTUNE
|
| /src/sys/contrib/device-tree/Bindings/regulator/ |
| H A D | regulator.yaml | 133 limit setting can be omitted.
139 that detection should be enabled but limit setting can be omitted.
146 be enabled but limit setting can be omitted.
152 limit setting can be omitted. Limit is given as microvolt offset from
159 that detection should be enabled but limit setting can be omitted. Limit
167 be enabled but limit setting can be omitted. Limit is given as microvolt
174 limit setting can be omitted. Limit is given as microvolt offset from
181 that detection should be enabled but limit setting can be omitted. Limit
189 be enabled but limit setting can be omitted. Limit is given as microvolt
204 limit setting can be omitted.
[all …]
|
| /src/sys/contrib/device-tree/Bindings/iio/light/ |
| H A D | sharp,gp2ap002.yaml | 46 Hysteresis setting for "far" object detection, this setting is
47 device-unique and adjust the optical setting for proximity detection
53 Hysteresis setting for "close" object detection, this setting is
54 device-unique and adjust the optical setting for proximity detection
|
| /src/sys/contrib/device-tree/Bindings/input/touchscreen/ |
| H A D | hycon,hy46xx.yaml | 50 description: Allows setting the sensitivity in the range from 0 to 255.
57 description: Allows enabling glove setting.
60 description: Allows setting the report speed in Hertz.
69 description: Allows setting how many samples throw before reporting touch
76 description: Allows setting the sensitivity distance in the range from 0 to 5.
82 description: Allows setting the edge compensation in the range from 0 to 16.
|
| /src/sys/contrib/openzfs/tests/zfs-tests/tests/functional/refreserv/ |
| H A D | refreserv_002_pos.ksh | 38 # Setting full size as refreservation, verify no snapshot can be created.
41 # 1. Setting full size as refreservation on pool
43 # 3. Setting full size as refreservation on filesystem
62 # value. Simply setting refreserv == quota can allow enough writes to
83 log_assert "Setting full size as refreservation, verify no snapshot " \
111 log_pass "Setting full size as refreservation, verify no snapshot " \
|
| /src/sys/contrib/libsodium/src/libsodium/crypto_pwhash/scryptsalsa208sha256/ |
| H A D | crypto_scrypt-common.c | 109 escrypt_parse_setting(const uint8_t *setting, in escrypt_parse_setting() argument
114 if (setting[0] != '$' || setting[1] != '7' || setting[2] != '$') { in escrypt_parse_setting()
117 src = setting + 3; in escrypt_parse_setting()
138 const uint8_t *setting, uint8_t *buf, size_t buflen) in escrypt_r() argument
153 src = escrypt_parse_setting(setting, &N_log2, &r, &p); in escrypt_r()
158 prefixlen = src - setting; in escrypt_r()
183 memcpy(dst, setting, prefixlen + saltlen); in escrypt_r()
|
| /src/sys/contrib/device-tree/Bindings/leds/ |
| H A D | richtek,rt8515.yaml | 36 defines the range of the dimmer setting (brightness) of the
45 defines the range of the dimmer setting (brightness) of the
60 ground. The maximum hardware current setting is calculated
63 maximum current of 700mA. By setting this attribute in
72 ground. The maximum hardware current setting is calculated
75 maximum current of 700mA. By setting this attribute in
|
| /src/secure/lib/libcrypto/man/man3/ |
| H A D | SSL_CONF_cmd.3 | 94 Various bug workarounds are set, same as setting \fBSSL_OP_ALL\fR.
97 Disables support for SSL/TLS compression, same as setting
111 Disables support for session tickets, same as setting \fBSSL_OP_NO_TICKET\fR.
120 setting \fBSSL_OP_ALLOW_CLIENT_RENEGOTIATION\fR.
124 Permits the use of unsafe legacy renegotiation. Equivalent to setting
128 Disables all attempts at renegotiation in (D)TLSv1.2 and earlier, same as setting
136 clients only. Equivalent to setting or clearing \fBSSL_OP_LEGACY_SERVER_CONNECT\fR.
154 Enables strict mode protocol handling. Equivalent to setting
198 group to use. This setting affects groups used for signatures (in TLSv1.2
339 setting the corresponding options \fBSSL_OP_NO_SSLv3\fR, \fBSSL_OP_NO_TLSv1\fR,
[all …]
|
| /src/tools/regression/environ/ |
| H A D | timings.c | 74 /* Iterate over setting variable. */ in main()
89 /* Iterate over setting variable. */ in main()
105 /* Iterate over setting variable. */ in main()
121 /* Iterate over setting variable. */ in main()
137 /* Iterate over setting variable. */ in main()
153 /* Iterate over setting variable. */ in main()
169 /* Iterate over setting variable. */ in main()
185 /* Iterate over setting variable. */ in main()
|
| /src/stand/defaults/ |
| H A D | loader.conf.5 | 48 behavior of some settings is defined by the setting's suffix;
49 the prefix identifies which module the setting controls.
58 Only one setting can be present on each line.
66 treatment, a setting will set the value of a
137 This type of setting cannot be processed by programs other
278 Use of this setting
282 Use of this setting
289 which aborts the bootstrap process, use of this setting should be avoided.
329 serial port speed setting.
347 This setting is for the
[all …]
|
| /src/sys/contrib/device-tree/src/arm64/renesas/ |
| H A D | salvator-xs.dtsi | 65 * (when SW31 is the default setting on Salvator-XS).
66 * - If SW31 is the default setting, you cannot use USB2.0 ch3 on
68 * Hence the SW31 setting must be changed like 2) below.
69 * 1) Default setting of SW31: ON-ON-OFF-OFF-OFF-OFF:
71 * 2) Changed setting of SW31: OFF-OFF-ON-ON-ON-ON:
|
| /src/contrib/pam-krb5/tests/fakepam/ |
| H A D | data.c | 209 * Return a setting in the PAM environment.
264 * Add a setting to the PAM environment. If there is another existing
265 * variable with the same value, the value is replaced, unless the setting
276 pam_putenv(pam_handle_t *pamh, const char *setting) in pam_putenv() argument
286 equals = strchr(setting, '='); in pam_putenv()
288 namelen = equals - setting; in pam_putenv()
291 namelen = strlen(setting); in pam_putenv()
294 copy = strdup(setting); in pam_putenv()
319 if (strncmp(setting, pamh->environ[i], namelen) == 0 in pam_putenv()
351 pam_putenv(pam_handle_t *pamh UNUSED, const char *setting) in pam_putenv() argument
[all …]
|
| /src/tests/sys/cddl/zfs/tests/refreserv/ |
| H A D | refreserv_002_pos.ksh | 36 # Setting full size as refreservation, verify no snapshot can be created.
39 # 1. Setting full size as refreservation on pool
41 # 3. Setting full size as refreservation on filesystem
71 # value. Simply setting refreserv == quota can allow enough writes to
93 log_assert "Setting full size as refreservation, verify no snapshot " \
121 log_pass "Setting full size as refreservation, verify no snapshot " \
|
| /src/crypto/openssl/doc/man3/ |
| H A D | SSL_CTX_set_quiet_shutdown.pod | 24 SSL_CTX_get_quiet_shutdown() returns the "quiet shutdown" setting of B<ctx>.
27 B<mode>. The setting stays valid until B<ssl> is removed with
32 SSL_get_quiet_shutdown() returns the "quiet shutdown" setting of B<ssl>.
43 When setting the "quiet shutdown" flag to 1, L<SSL_shutdown(3)>
59 setting.
|
| /src/sys/contrib/openzfs/tests/zfs-tests/tests/functional/cli_root/zfs_set/ |
| H A D | snapdir_001_pos.ksh | 37 # Setting a valid snapdir on a dataset, it should be successful.
42 # 3. Setting different valid snapdir to each dataset.
44 # 5. Verify .zfs directory is hidden|visible according to the snapdir setting.
85 log_assert "Setting a valid snapdir property on a dataset succeeds."
101 log_pass "Setting a valid snapdir property on a dataset succeeds."
|
| /src/sys/contrib/openzfs/tests/zfs-tests/tests/functional/cli_root/zpool_set/ |
| H A D | vdev_set_scheduler.ksh | 32 # Setting vdev scheduler property while reading from vdev should not cause panic.
37 # 3. Start reading from file, while also setting the scheduler property.
69 # 2. Write a file to the pool, while also setting the scheduler property.
82 # 3. Starting reading from file, while also setting the scheduler property.
93 log_pass "Setting vdev scheduler property while reading from vdev does not cause panic"
|