Home
last modified time | relevance | path

Searched +full:regulator +full:- +full:v5 (Results 1 – 25 of 36) sorted by relevance

12

/linux-5.10/arch/arm/boot/dts/
Darmada-388-gp.dts1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
4 * (RD-88F6820-GP)
8 * Gregory CLEMENT <gregory.clement@free-electrons.com>
11 /dts-v1/;
12 #include "armada-388.dtsi"
13 #include <dt-bindings/gpio/gpio.h>
16 model = "Marvell Armada 388 DB-88F6820-GP";
17 compatible = "marvell,a388-gp", "marvell,armada388", "marvell,armada380";
20 stdout-path = "serial0:115200n8";
35 internal-regs {
[all …]
Darmada-385-synology-ds116.dts1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
8 /dts-v1/;
9 #include "armada-385.dtsi"
10 #include <dt-bindings/gpio/gpio.h>
14 compatible = "marvell,a385-gp", "marvell,armada385", "marvell,armada380";
17 stdout-path = "serial0:115200n8";
32 internal-regs {
34 pinctrl-names = "default";
35 pinctrl-0 = <&i2c0_pins>;
37 clock-frequency = <100000>;
[all …]
Dpxa300-raumfeld-common.dtsi1 // SPDX-License-Identifier: GPL-2.0
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
6 #include <dt-bindings/interrupt-controller/irq.h>
10 hw-revision = <0>;
14 stdout-path = &ffuart;
22 reg_3v3: regulator-3v3 {
23 compatible = "regulator-fixed";
24 regulator-name = "3v3-fixed-supply";
25 regulator-min-microvolt = <3300000>;
[all …]
Dimx6qdl-emcon-avari.dtsi1 // SPDX-License-Identifier: (GPL-2.0 or MIT)
15 reg_wall_5p0: reg-wall5p0 {
16 compatible = "regulator-fixed";
17 regulator-name = "Main-Supply";
18 regulator-min-microvolt = <5000000>;
19 regulator-max-microvolt = <5000000>;
20 regulator-always-on;
21 regulator-boot-on;
24 reg_base3p3: reg-base3p3 {
25 compatible = "regulator-fixed";
[all …]
Dimx53-tx53.dtsi2 * Copyright 2012-2017 <LW@KARO-electronics.de>
3 * based on imx53-qsb.dts
7 * This file is dual-licensed: you can use it either under the terms
46 #include <dt-bindings/gpio/gpio.h>
49 model = "Ka-Ro electronics TX53 module";
62 reg-can-xcvr = &reg_can_xcvr;
69 clock-frequency = <0>;
73 mclk: clock-mclk {
74 compatible = "fixed-clock";
75 #clock-cells = <0>;
[all …]
Dimx6ul-tx6ul.dtsi2 * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
4 * This file is dual-licensed: you can use it either under the terms
42 #include <dt-bindings/gpio/gpio.h>
43 #include <dt-bindings/interrupt-controller/irq.h>
44 #include <dt-bindings/pwm/pwm.h>
56 lcdif-23bit-pins-a = &pinctrl_disp0_1;
57 lcdif-24bit-pins-a = &pinctrl_disp0_2;
59 reg-can-xcvr = &reg_can_xcvr;
70 stdout-path = &uart1;
75 reg = <0x80000000 0>; /* will be filled by U-Boot */
[all …]
Dimx6qdl-tx6.dtsi2 * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
4 * This file is dual-licensed: you can use it either under the terms
42 #include <dt-bindings/gpio/gpio.h>
43 #include <dt-bindings/input/input.h>
44 #include <dt-bindings/interrupt-controller/irq.h>
45 #include <dt-bindings/pwm/pwm.h>
46 #include <dt-bindings/sound/fsl-imx-audmux.h>
53 lcdif-23bit-pins-a = &pinctrl_disp0_1;
54 lcdif-24bit-pins-a = &pinctrl_disp0_2;
57 reg-can-xcvr = &reg_can_xcvr;
[all …]
Dls1021a-tsn.dts1 // SPDX-License-Identifier: GPL-2.0
2 /* Copyright 2016-2018 NXP Semiconductors
6 /dts-v1/;
10 model = "NXP LS1021A-TSN Board";
12 sys_mclk: clock-mclk {
13 compatible = "fixed-clock";
14 #clock-cells = <0>;
15 clock-frequency = <24576000>;
18 reg_vdda_codec: regulator-3V3 {
19 compatible = "regulator-fixed";
[all …]
Dsun9i-a80-cubieboard4.dts5 * Chen-Yu Tsai <wens@csie.org>
7 * This file is dual-licensed: you can use it either under the terms
46 /dts-v1/;
47 #include "sun9i-a80.dtsi"
49 #include <dt-bindings/gpio/gpio.h>
53 compatible = "cubietech,a80-cubieboard4", "allwinner,sun9i-a80";
60 stdout-path = "serial0:115200n8";
64 compatible = "gpio-leds";
77 vga-connector {
78 compatible = "vga-connector";
[all …]
Dimx7-mba7.dtsi1 // SPDX-License-Identifier: GPL-2.0 OR X11
6 * Author: Markus Niebel <Markus.Niebel@tq-group.com>
13 #include <dt-bindings/input/input.h>
14 #include <dt-bindings/net/ti-dp83867.h>
18 compatible = "gpio-beeper";
23 stdout-path = &uart6;
26 gpio_buttons: gpio-keys {
27 compatible = "gpio-keys";
29 button-0 {
36 button-1 {
[all …]
Dsun9i-a80-optimus.dts2 * Copyright 2014 Chen-Yu Tsai
4 * Chen-Yu Tsai <wens@csie.org>
6 * This file is dual-licensed: you can use it either under the terms
45 /dts-v1/;
46 #include "sun9i-a80.dtsi"
48 #include <dt-bindings/gpio/gpio.h>
52 compatible = "merrii,a80-optimus", "allwinner,sun9i-a80";
60 stdout-path = "serial0:115200n8";
64 compatible = "gpio-leds";
83 reg_usb1_vbus: usb1-vbus {
[all …]
Dimx6qdl-nitrogen6_som2.dtsi1 // SPDX-License-Identifier: GPL-2.0 OR X11
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
10 stdout-path = &uart2;
18 backlight_lcd: backlight-lcd {
19 compatible = "pwm-backlight";
21 brightness-levels = <0 4 8 16 32 64 128 255>;
22 default-brightness-level = <7>;
23 power-supply = <&reg_3p3v>;
27 backlight_lvds0: backlight-lvds0 {
[all …]
Drk3188-bqedison2qc.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
7 /dts-v1/;
8 #include <dt-bindings/i2c/i2c.h>
9 #include <dt-bindings/input/input.h>
13 model = "BQ Edison2 Quad-Core";
14 compatible = "mundoreader,bq-edison2qc", "rockchip,rk3188";
22 compatible = "pwm-backlight";
23 power-supply = <&vsys>;
27 gpio-keys {
28 compatible = "gpio-keys";
[all …]
Dimx28-tx28.dts3 * Copyright 2013-2017 Lothar Waßmann <LW@KARO-electronics.de>
5 * This file is dual-licensed: you can use it either under the terms
43 /dts-v1/;
45 #include <dt-bindings/gpio/gpio.h>
46 #include <dt-bindings/interrupt-controller/irq.h>
49 model = "Ka-Ro electronics TX28 module";
70 reg = <0x40000000 0>; /* will be filled in by U-Boot */
74 compatible = "w1-gpio";
79 reg_usb0_vbus: regulator-usb0-vbus {
80 compatible = "regulator-fixed";
[all …]
Dqcom-ipq4019.dtsi1 // SPDX-License-Identifier: GPL-2.0-only
6 /dts-v1/;
8 #include <dt-bindings/clock/qcom,gcc-ipq4019.h>
9 #include <dt-bindings/interrupt-controller/arm-gic.h>
10 #include <dt-bindings/interrupt-controller/irq.h>
13 #address-cells = <1>;
14 #size-cells = <1>;
18 interrupt-parent = <&intc>;
20 reserved-memory {
21 #address-cells = <0x1>;
[all …]
Dtegra30-colibri.dtsi1 // SPDX-License-Identifier: GPL-2.0
15 nvidia,ddc-i2c-bus = <&hdmi_ddc>;
16 nvidia,hpd-gpio =
18 pll-supply = <&reg_1v8_avdd_hdmi_pll>;
19 vdd-supply = <&reg_3v3_avdd_hdmi>;
24 pinctrl-names = "default";
25 pinctrl-0 = <&state_default>;
28 /* Analogue Audio (On-module) */
29 clk1-out-pw4 {
34 nvidia,enable-input = <TEGRA_PIN_DISABLE>;
[all …]
/linux-5.10/Documentation/devicetree/bindings/regulator/
Dmax8660.yaml1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/regulator/max8660.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Maxim MAX8660 voltage regulator
10 - Daniel Mack <zonque@gmail.com>
14 pattern: "pmic@[0-9a-f]{1,2}"
17 - maxim,max8660
18 - maxim,max8661
27 "regulator-.+":
[all …]
/linux-5.10/Documentation/ABI/testing/
Dsysfs-platform-dptf4 Contact: linux-acpi@vger.kernel.org
6 (RO) The charger type - Traditional, Hybrid or NVDC.
11 Contact: linux-acpi@vger.kernel.org
19 Contact: linux-acpi@vger.kernel.org
27 Contact: linux-acpi@vger.kernel.org
33 - 0x00 = DC
34 - 0x01 = AC
35 - 0x02 = USB
36 - 0x03 = Wireless Charger
43 Contact: linux-acpi@vger.kernel.org
[all …]
/linux-5.10/drivers/regulator/
Dpcap-regulator.c1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * PCAP2 Regulator Driver
13 #include <linux/regulator/driver.h>
14 #include <linux/regulator/machine.h>
15 #include <linux/mfd/ezx-pcap.h>
113 /* V5 STBY and LOWPWR are on PCAP_REG_VREG2 */
114 VREG_INFO(V5, PCAP_REG_VREG1, 15, 16, 12, 19),
147 /* the regulator doesn't support voltage switching */ in pcap_regulator_set_voltage_sel()
148 if (rdev->desc->n_voltages == 1) in pcap_regulator_set_voltage_sel()
149 return -EINVAL; in pcap_regulator_set_voltage_sel()
[all …]
Dmax8660.c1 // SPDX-License-Identifier: GPL-2.0-only
3 * max8660.c -- Voltage regulation for the Maxim 8660/8661
5 * based on max1586.c and wm8400-regulator.c
11 * Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX8660-MAX8661.pdf
13 * This chip is a bit nasty because it is a write-only device. Thus, the driver
23 * functions for V3-V7 is sufficient. For maximum flexibility during
31 #include <linux/regulator/driver.h>
33 #include <linux/regulator/max8660.h>
36 #include <linux/regulator/of_regulator.h>
80 u8 reg_val = (max8660->shadow_regs[reg] & mask) | val; in max8660_write()
[all …]
/linux-5.10/Documentation/devicetree/bindings/iio/dac/
Dti-dac082s085.txt1 Texas Instruments 8/10/12-bit 2/4-channel DAC driver
4 - compatible: Must be one of:
11 - reg: Chip select number.
12 - spi-cpha, spi-cpol: SPI mode (0,1) or (1,0) must be used, so specify
13 either spi-cpha or spi-cpol (but not both).
14 - vref-supply: Phandle to the external reference voltage supply.
17 ../../spi/spi-bus.txt.
20 vref_2v5_reg: regulator-vref {
21 compatible = "regulator-fixed";
22 regulator-name = "2v5";
[all …]
/linux-5.10/arch/arm64/boot/dts/freescale/
Dimx8mq-nitrogen.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
8 #include <dt-bindings/input/input.h>
13 compatible = "boundary,imx8mq-nitrogen8m", "fsl,imx8mq";
16 stdout-path = "serial0:115200n8";
24 gpio-keys {
25 compatible = "gpio-keys";
26 pinctrl-names = "default";
27 pinctrl-0 = <&pinctrl_gpio_keys>;
33 wakeup-source;
[all …]
/linux-5.10/include/linux/mfd/
Dezx-pcap.h1 /* SPDX-License-Identifier: GPL-2.0 */
54 #define PCAP_REG_VREG2 0x6 /* Regulator Bank 2 Control */
55 #define PCAP_REG_AUXVREG 0x7 /* Auxiliary Regulator Control */
64 #define PCAP_REG_LOWPWR 0x18 /* Regulator Low Power Control */
74 #define PCAP_REG_SWCTRL 0x4 /* Switching Regulator Control */
75 #define PCAP_REG_VREG1 0x5 /* Regulator Bank 1 Control */
82 #define PCAP_REG_AUXVREG_MASK 0x16 /* Auxiliary Regulator Mask */
117 #define V5 4 macro
/linux-5.10/drivers/iio/dac/
Dad5064.c1 // SPDX-License-Identifier: GPL-2.0-only
3 * AD5024, AD5025, AD5044, AD5045, AD5064, AD5064-1, AD5065, AD5625, AD5625R,
20 #include <linux/regulator/consumer.h>
56 * enum ad5064_regmap_type - Register layout variant
68 * struct ad5064_chip_info - chip specific information
91 * struct ad5064_state - driver instance specific data
197 return st->write(st, cmd, addr, val); in ad5064_write()
207 if (st->chip_info->regmap_type == AD5064_REGMAP_LTC) { in ad5064_sync_powerdown_mode()
209 address = chan->address; in ad5064_sync_powerdown_mode()
211 if (st->chip_info->regmap_type == AD5064_REGMAP_ADI2) in ad5064_sync_powerdown_mode()
[all …]
/linux-5.10/arch/arm64/boot/dts/qcom/
Dapq8016-sbc.dtsi1 // SPDX-License-Identifier: GPL-2.0-only
6 #include "msm8916-pm8916.dtsi"
7 #include <dt-bindings/gpio/gpio.h>
8 #include <dt-bindings/input/input.h>
9 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
10 #include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
11 #include <dt-bindings/sound/apq8016-lpass.h>
26 stdout-path = "serial0";
29 camera_vdddo_1v8: camera-vdddo-1v8 {
30 compatible = "regulator-fixed";
[all …]

12