| /linux-6.15/arch/arm64/boot/dts/freescale/ |
| D | imx8-ss-gpu0.dtsi | 1 // SPDX-License-Identifier: GPL-2.0+
7 #include <dt-bindings/firmware/imx/rsrc.h>
10 compatible = "simple-bus";
11 #address-cells = <1>;
12 #size-cells = <1>;
17 reg = <0x53100000 0x40000>;
21 clock-names = "core", "shader";
22 assigned-clocks = <&clk IMX_SC_R_GPU_0_PID0 IMX_SC_PM_CLK_PER>,
24 assigned-clock-rates = <700000000>, <850000000>;
25 power-domains = <&pd IMX_SC_R_GPU_0_PID0>;
|
| D | imx8mm-verdin-mallow.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
7 * https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx-8m-mini-nano
8 * https://www.toradex.com/products/carrier-board/mallow-carrier-board
11 #include <dt-bindings/leds/common.h>
15 compatible = "gpio-leds";
16 pinctrl-names = "default";
17 pinctrl-0 = <&pinctrl_leds>;
19 /* SODIMM 52 - USER_LED_1_RED */
20 led-0 {
23 function-enumerator = <1>;
[all …]
|
| /linux-6.15/arch/powerpc/boot/dts/fsl/ |
| D | pq3-etsec2-1.dtsi | 14 * names of its contributors may be used to endorse or promote products
37 #address-cells = <1>;
38 #size-cells = <0>;
39 compatible = "fsl,etsec2-tbi";
40 reg = <0x25000 0x1000 0xb1030 0x4>;
44 #address-cells = <1>;
45 #size-cells = <1>;
51 fsl,magic-packet;
52 local-mac-address = [ 00 00 00 00 00 00 ];
55 queue-group@b1000 {
[all …]
|
| D | pq3-etsec2-2.dtsi | 14 * names of its contributors may be used to endorse or promote products
36 #address-cells = <1>;
37 #size-cells = <0>;
38 compatible = "fsl,etsec2-tbi";
39 reg = <0x26000 0x1000 0xb1030 0x4>;
43 #address-cells = <1>;
44 #size-cells = <1>;
50 fsl,magic-packet;
51 local-mac-address = [ 00 00 00 00 00 00 ];
54 queue-group@b2000 {
[all …]
|
| D | pq3-etsec2-0.dtsi | 14 * names of its contributors may be used to endorse or promote products
37 #address-cells = <1>;
38 #size-cells = <0>;
39 compatible = "fsl,etsec2-mdio";
40 reg = <0x24000 0x1000 0xb0030 0x4>;
44 #address-cells = <1>;
45 #size-cells = <1>;
51 fsl,magic-packet;
52 local-mac-address = [ 00 00 00 00 00 00 ];
55 queue-group@b0000 {
[all …]
|
| D | mpc8572si-pre.dtsi | 14 * names of its contributors may be used to endorse or promote products
35 /dts-v1/;
41 #address-cells = <2>;
42 #size-cells = <2>;
43 interrupt-parent = <&mpic>;
58 #address-cells = <1>;
59 #size-cells = <0>;
63 reg = <0x0>;
64 next-level-cache = <&L2>;
69 reg = <0x1>;
[all …]
|
| D | p1021si-pre.dtsi | 14 * names of its contributors may be used to endorse or promote products
35 /dts-v1/;
41 #address-cells = <2>;
42 #size-cells = <2>;
43 interrupt-parent = <&mpic>;
56 #address-cells = <1>;
57 #size-cells = <0>;
61 reg = <0x0>;
62 next-level-cache = <&L2>;
67 reg = <0x1>;
[all …]
|
| D | p1020si-pre.dtsi | 14 * names of its contributors may be used to endorse or promote products
35 /dts-v1/;
41 #address-cells = <2>;
42 #size-cells = <2>;
43 interrupt-parent = <&mpic>;
56 #address-cells = <1>;
57 #size-cells = <0>;
61 reg = <0x0>;
62 next-level-cache = <&L2>;
67 reg = <0x1>;
[all …]
|
| D | p1022si-pre.dtsi | 14 * names of its contributors may be used to endorse or promote products
35 /dts-v1/;
41 #address-cells = <2>;
42 #size-cells = <2>;
43 interrupt-parent = <&mpic>;
58 #address-cells = <1>;
59 #size-cells = <0>;
63 reg = <0x0>;
64 next-level-cache = <&L2>;
69 reg = <0x1>;
[all …]
|
| D | p2020si-pre.dtsi | 14 * names of its contributors may be used to endorse or promote products
35 /dts-v1/;
41 #address-cells = <2>;
42 #size-cells = <2>;
43 interrupt-parent = <&mpic>;
57 #address-cells = <1>;
58 #size-cells = <0>;
62 reg = <0x0>;
63 next-level-cache = <&L2>;
68 reg = <0x1>;
[all …]
|
| D | c293si-post.dtsi | 14 * names of its contributors may be used to endorse or promote products
36 #address-cells = <2>;
37 #size-cells = <1>;
44 compatible = "fsl,qoriq-pcie-v2.2", "fsl,qoriq-pcie";
46 #size-cells = <2>;
47 #address-cells = <3>;
48 bus-range = <0 255>;
49 clock-frequency = <33333333>;
53 reg = <0 0 0 0 0>;
54 #interrupt-cells = <1>;
[all …]
|
| D | t2081qds.dts | 4 * Copyright 2013 - 2015 Freescale Semiconductor Inc.
14 * names of its contributors may be used to endorse or promote products
35 /include/ "t208xsi-pre.dtsi"
41 #address-cells = <2>;
42 #size-cells = <2>;
43 interrupt-parent = <&mpic>;
58 phy-handle = <&phy_sgmii_s7_1c>;
59 phy-connection-type = "sgmii";
63 phy-handle = <&phy_sgmii_s7_1d>;
64 phy-connection-type = "sgmii";
[all …]
|
| /linux-6.15/arch/arm64/boot/dts/altera/ |
| D | socfpga_stratix10_socdk.dts | 1 // SPDX-License-Identifier: GPL-2.0-only
10 compatible = "altr,socfpga-stratix10-socdk", "altr,socfpga-stratix10";
20 stdout-path = "serial0:115200n8";
24 compatible = "gpio-leds";
25 led-hps0 {
30 led-hps1 {
35 led-hps2 {
43 /* We expect the bootloader to fill in the reg */
44 reg = <0 0x80000000 0 0>;
47 ref_033v: regulator-v-ref {
[all …]
|
| /linux-6.15/Documentation/devicetree/bindings/i3c/ |
| D | i3c.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Alexandre Belloni <alexandre.belloni@bootlin.com>
11 - Miquel Raynal <miquel.raynal@bootlin.com>
20 pattern: "^i3c@[0-9a-f]+$"
22 "#address-cells":
39 "#size-cells":
42 i3c-scl-hz:
49 i2c-scl-hz:
[all …]
|
| /linux-6.15/arch/arm64/boot/dts/qcom/ |
| D | sar2130p-qar2130p.dts | 1 // SPDX-License-Identifier: BSD-3-Clause
6 /dts-v1/;
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
16 chassis-type = "embedded";
28 stdout-path = "serial0:115200n8";
31 vph_pwr: regulator-vph-pwr {
32 compatible = "regulator-fixed";
33 regulator-name = "vph_pwr";
34 regulator-min-microvolt = <3700000>;
[all …]
|
| D | ipq5424-rdp466.dts | 1 // SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
8 /dts-v1/;
14 compatible = "qcom,ipq5424-rdp466", "qcom,ipq5424";
20 vreg_misc_3p3: regulator-usb-3p3 {
21 compatible = "regulator-fixed";
22 regulator-min-microvolt = <3300000>;
23 regulator-max-microvolt = <3300000>;
24 regulator-boot-on;
25 regulator-always-on;
26 regulator-name = "usb_hs_vdda_3p3";
[all …]
|
| D | sdm845-lg-common.dtsi | 1 // SPDX-License-Identifier: GPL-2.0
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
10 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
16 /delete-node/ &adsp_mem;
17 /delete-node/ &cdsp_mem;
18 /delete-node/ &gpu_mem;
19 /delete-node/ &ipa_fw_mem;
20 /delete-node/ &mba_region;
21 /delete-node/ &mpss_region;
[all …]
|
| /linux-6.15/drivers/scsi/aic7xxx/ |
| D | aic7xxx_osm_pci.c | 4 * Copyright (c) 2000-2001 Adaptec Inc.
18 * 3. Neither the names of the above-listed copyright holders nor the names
148 if (ahc->platform_data && ahc->platform_data->host) in ahc_linux_pci_dev_remove()
149 scsi_remove_host(ahc->platform_data->host); in ahc_linux_pci_dev_remove()
160 struct pci_dev *pdev = ahc->dev_softc, *master_pdev; in ahc_linux_pci_inherit_flags()
161 unsigned int master_devfn = PCI_DEVFN(PCI_SLOT(pdev->devfn), 0); in ahc_linux_pci_inherit_flags()
163 master_pdev = pci_get_slot(pdev->bus, master_devfn); in ahc_linux_pci_inherit_flags()
167 ahc->flags &= ~AHC_BIOS_ENABLED; in ahc_linux_pci_inherit_flags()
168 ahc->flags |= master->flags & AHC_BIOS_ENABLED; in ahc_linux_pci_inherit_flags()
170 ahc->flags &= ~AHC_PRIMARY_CHANNEL; in ahc_linux_pci_inherit_flags()
[all …]
|
| /linux-6.15/Documentation/devicetree/bindings/mfd/ |
| D | brcm,bcm6368-gpio-sysctl.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/mfd/brcm,bcm6368-gpio-sysctl.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Álvaro Fernández Rojas <noltari@gmail.com>
11 - Jonas Gorski <jonas.gorski@gmail.com>
18 "#address-cells": true
20 "#size-cells": true
24 - const: brcm,bcm6368-gpio-sysctl
25 - const: syscon
[all …]
|
| /linux-6.15/arch/arm/boot/dts/allwinner/ |
| D | sun4i-a10-hackberry.dts | 4 * Maxime Ripard <maxime.ripard@free-electrons.com>
6 * This file is dual-licensed: you can use it either under the terms
45 /dts-v1/;
46 #include "sun4i-a10.dtsi"
47 #include "sunxi-common-regulators.dtsi"
49 #include <dt-bindings/gpio/gpio.h>
53 compatible = "miniand,hackberry", "allwinner,sun4i-a10";
60 stdout-path = "serial0:115200n8";
63 reg_emac_3v3: emac-3v3 {
64 compatible = "regulator-fixed";
[all …]
|
| D | sun4i-a10-mini-xplus.dts | 4 * Maxime Ripard <maxime.ripard@free-electrons.com>
6 * This file is dual-licensed: you can use it either under the terms
45 /dts-v1/;
46 #include "sun4i-a10.dtsi"
47 #include "sunxi-common-regulators.dtsi"
49 #include <dt-bindings/gpio/gpio.h>
52 model = "PineRiver Mini X-Plus";
53 compatible = "pineriver,mini-xplus", "allwinner,sun4i-a10";
60 stdout-path = "serial0:115200n8";
76 compatible = "x-powers,axp209";
[all …]
|
| /linux-6.15/arch/arm/boot/dts/microchip/ |
| D | sama5d3_gmac.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only
3 * sama5d3_gmac.dtsi - Device Tree Include file for SAMA5D3 SoC with
9 #include <dt-bindings/pinctrl/at91.h>
10 #include <dt-bindings/interrupt-controller/irq.h>
67 compatible = "atmel,sama5d3-gem";
68 reg = <0xf0028000 0x100>;
70 pinctrl-names = "default";
71 pinctrl-0 = <&pinctrl_macb0_data_rgmii &pinctrl_macb0_signal_rgmii>;
73 clock-names = "hclk", "pclk";
|
| /linux-6.15/arch/arm/boot/dts/marvell/ |
| D | armada-xp-openblocks-ax3-4.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 * Device Tree file for OpenBlocks AX3-4 board
7 * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
10 /dts-v1/;
11 #include <dt-bindings/gpio/gpio.h>
12 #include <dt-bindings/input/input.h>
13 #include "armada-xp-mv78260.dtsi"
16 model = "PlatHome OpenBlocks AX3-4 board";
17 …compatible = "plathome,openblocks-ax3-4", "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell…
20 stdout-path = "serial0:115200n8";
[all …]
|
| /linux-6.15/arch/arm/boot/dts/rockchip/ |
| D | rk3288-veyron-jerry.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
8 /dts-v1/;
9 #include "rk3288-veyron-chromebook.dtsi"
10 #include "../cros-ec-sbs.dtsi"
14 compatible = "google,veyron-jerry-rev15", "google,veyron-jerry-rev14",
15 "google,veyron-jerry-rev13", "google,veyron-jerry-rev12",
16 "google,veyron-jerry-rev11", "google,veyron-jerry-rev10",
17 "google,veyron-jerry-rev7", "google,veyron-jerry-rev6",
18 "google,veyron-jerry-rev5", "google,veyron-jerry-rev4",
19 "google,veyron-jerry-rev3", "google,veyron-jerry",
[all …]
|
| /linux-6.15/drivers/pinctrl/freescale/ |
| D | pinctrl-imx8ulp.c | 1 // SPDX-License-Identifier: GPL-2.0
14 #include "pinctrl-imx.h"
115 /* Pad names for the pinmux subsystem */
226 u32 reg; in imx8ulp_pmx_gpio_set_direction() local
228 pin_reg = &ipctl->pin_regs[offset]; in imx8ulp_pmx_gpio_set_direction()
229 if (pin_reg->mux_reg == -1) in imx8ulp_pmx_gpio_set_direction()
230 return -EINVAL; in imx8ulp_pmx_gpio_set_direction()
232 reg = readl(ipctl->base + pin_reg->mux_reg); in imx8ulp_pmx_gpio_set_direction()
234 reg = (reg & ~BM_OBE_ENABLED) | BM_IBE_ENABLED; in imx8ulp_pmx_gpio_set_direction()
236 reg = (reg & ~BM_IBE_ENABLED) | BM_OBE_ENABLED; in imx8ulp_pmx_gpio_set_direction()
[all …]
|