/linux-6.15/arch/powerpc/boot/dts/fsl/ |
D | c293pcie.dts | 14 * names of its contributors may be used to endorse or promote products 35 /include/ "c293si-pre.dtsi" 45 ifc: memory-controller@fffe1e000 { 46 reg = <0xf 0xffe1e000 0 0x2000>; 58 reg = <0xf 0xffe0a000 0 0x1000>; 75 #address-cells = <1>; 76 #size-cells = <1>; 77 compatible = "cfi-flash"; 78 reg = <0x0 0x0 0x4000000>; 79 bank-width = <2>; [all …]
|
D | p1025rdb_36b.dts | 2 * P1025 RDB Device Tree Source (36-bit address map) 14 * names of its contributors may be used to endorse or promote products 35 /include/ "p1021si-pre.dtsi" 45 reg = <0xf 0xffe05000 0 0x1000>; 57 reg = <0xf 0xffe09000 0 0x1000>; 72 reg = <0xf 0xffe0a000 0 0x1000>; 93 /include/ "p1021si-post.dtsi"
|
D | t4240si-pre.dtsi | 4 * Copyright 2012 - 2015 Freescale Semiconductor Inc. 14 * names of its contributors may be used to endorse or promote products 35 /dts-v1/; 41 #address-cells = <2>; 42 #size-cells = <2>; 43 interrupt-parent = <&mpic>; 87 #address-cells = <1>; 88 #size-cells = <0>; 92 reg = <0 1>; 94 next-level-cache = <&L2_1>; [all …]
|
D | mpc8544ds.dtsi | 2 * MPC8544DS Device Tree Source stub (no addresses or top-level ranges) 14 * names of its contributors may be used to endorse or promote products 37 #address-cells = <1>; 38 #size-cells = <1>; 39 compatible = "cfi-flash"; 40 reg = <0x0 0x0 0x800000>; 41 bank-width = <2>; 42 device-width = <1>; 45 reg = <0x0 0x10000>; 46 label = "dtb-nor"; [all …]
|
/linux-6.15/arch/arm64/boot/dts/qcom/ |
D | sm8250-xiaomi-elish-common.dtsi | 1 // SPDX-License-Identifier: BSD-3-Clause 3 * Copyright (c) 2022-2024 Jianhua Lu <lujianhua000@gmail.com> 6 #include <dt-bindings/arm/qcom,ids.h> 7 #include <dt-bindings/phy/phy.h> 8 #include <dt-bindings/regulator/qcom,rpmh-regulator.h> 9 #include <dt-bindings/usb/pd.h> 20 /delete-node/ &adsp_mem; 21 /delete-node/ &cdsp_secure_heap; 22 /delete-node/ &slpi_mem; 23 /delete-node/ &spss_mem; [all …]
|
D | sc7180-trogdor-lazor-limozeen-nots-r4.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 8 #include "sc7180-trogdor-lazor-limozeen-nots-r5.dts" 12 compatible = "google,lazor-rev4-sku5", "qcom,sc7180"; 16 * rev4-sku5 was built with a different trackpad. 18 /delete-node/&trackpad; 21 compatible = "hid-over-i2c"; 22 reg = <0x2c>; 23 pinctrl-names = "default"; 24 pinctrl-0 = <&tp_int_odl>; 26 interrupt-parent = <&tlmm>; [all …]
|
/linux-6.15/arch/arm/boot/dts/samsung/ |
D | exynos5.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 5 * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd. 13 #include <dt-bindings/interrupt-controller/arm-gic.h> 14 #include <dt-bindings/interrupt-controller/irq.h> 17 interrupt-parent = <&gic>; 18 #address-cells = <1>; 19 #size-cells = <1>; 33 compatible = "simple-bus"; 34 #address-cells = <1>; 35 #size-cells = <1>; [all …]
|
/linux-6.15/arch/arm/boot/dts/rockchip/ |
D | rk3229-xms6.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 3 /dts-v1/; 5 #include <dt-bindings/input/input.h> 20 reg = <0x60000000 0x40000000>; 23 dc_12v: regulator-dc-12v { 24 compatible = "regulator-fixed"; 25 regulator-name = "dc_12v"; 26 regulator-always-on; 27 regulator-boot-on; 28 regulator-min-microvolt = <12000000>; [all …]
|
/linux-6.15/arch/arm64/boot/dts/airoha/ |
D | en7581.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 #include <dt-bindings/interrupt-controller/irq.h> 4 #include <dt-bindings/interrupt-controller/arm-gic.h> 5 #include <dt-bindings/clock/en7523-clk.h> 6 #include <dt-bindings/reset/airoha,en7581-reset.h> 9 interrupt-parent = <&gic>; 10 #address-cells = <2>; 11 #size-cells = <2>; 13 reserved-memory { 14 #address-cells = <2>; [all …]
|
/linux-6.15/arch/arm64/boot/dts/exynos/ |
D | exynos9810.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause 9 #include <dt-bindings/interrupt-controller/arm-gic.h> 13 #address-cells = <2>; 14 #size-cells = <1>; 16 interrupt-parent = <&gic>; 31 #address-cells = <1>; 32 #size-cells = <0>; 34 cpu-map { 68 compatible = "arm,cortex-a55"; 69 reg = <0x0>; [all …]
|
/linux-6.15/Documentation/devicetree/bindings/regulator/ |
D | tps65218.txt | 4 - compatible: "ti,tps65218" 5 - reg: I2C slave address 7 - List of regulators provided by this controller, must be named 8 after their hardware counterparts: dcdc[1-6] and ldo1 9 - This is the list of child nodes that specify the regulator 14 The valid names for regulators are: 15 tps65217: regulator-dcdc1, regulator-dcdc2, regulator-dcdc3, regulator-dcdc4, 16 regulator-dcdc5, regulator-dcdc6, regulator-ldo1, regulator-ls3. 21 reg = <0x24>; 24 interrupt-controller; [all …]
|
/linux-6.15/arch/arm64/boot/dts/broadcom/stingray/ |
D | stingray-pcie.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) 7 compatible = "brcm,iproc-pcie-paxc-v2"; 8 reg = <0 0x60400000 0 0x1000>; 9 linux,pci-domain = <8>; 11 bus-range = <0x0 0x1>; 13 #address-cells = <3>; 14 #size-cells = <2>; 18 dma-coherent; 20 msi-map = <0x100 &gic_its 0x2000 0x1>, /* PF0 */ 21 <0x108 &gic_its 0x2040 0x8>, /* PF0-VF0-7 */ [all …]
|
/linux-6.15/arch/arm64/boot/dts/mediatek/ |
D | mt8183-kukui-jacuzzi-burnet.dts | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT) 6 /dts-v1/; 7 #include "mt8183-kukui-jacuzzi.dtsi" 8 #include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi" 12 chassis-type = "convertible"; 17 mediatek,dmic-mode = <1>; /* one-wire */ 22 compatible = "hid-over-i2c"; 23 reg = <0x2c>; 24 pinctrl-names = "default"; 25 pinctrl-0 = <&touchscreen_pins>; [all …]
|
D | mt8183-kukui-kakadu-sku22.dts | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT) 6 /dts-v1/; 7 #include "mt8183-kukui-kakadu.dtsi" 8 #include "mt8183-kukui-audio-rt1015p.dtsi" 12 chassis-type = "tablet"; 13 compatible = "google,kakadu-rev3-sku22", "google,kakadu-rev2-sku22", 19 compatible = "hid-over-i2c"; 20 reg = <0x10>; 21 pinctrl-names = "default"; 22 pinctrl-0 = <&open_touch>; [all …]
|
D | mt8183-kukui-jacuzzi-cozmo.dts | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT) 6 /dts-v1/; 7 #include "mt8183-kukui-jacuzzi.dtsi" 8 #include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi" 12 chassis-type = "laptop"; 17 google,remote-bus = <0>; 21 i2c-scl-internal-delay-ns = <25000>; 24 compatible = "hid-over-i2c"; 25 reg = <0x2c>; 26 hid-descr-addr = <0x20>; [all …]
|
D | mt8186-corsola-magneton-sku393216.dts | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT) 6 /dts-v1/; 7 #include "mt8186-corsola-steelix.dtsi" 11 compatible = "google,steelix-sku393219", "google,steelix-sku393216", 13 chassis-type = "laptop"; 22 compatible = "hid-over-i2c"; 23 reg = <0x10>; 24 interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>; 25 pinctrl-names = "default"; 26 pinctrl-0 = <&touchscreen_pins>; [all …]
|
D | mt8186-corsola-magneton-sku393217.dts | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT) 6 /dts-v1/; 7 #include "mt8186-corsola-steelix.dtsi" 11 compatible = "google,steelix-sku393220", "google,steelix-sku393217", 13 chassis-type = "laptop"; 22 compatible = "hid-over-i2c"; 23 reg = <0x40>; 24 interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>; 25 pinctrl-names = "default"; 26 pinctrl-0 = <&touchscreen_pins>; [all …]
|
D | mt8186-corsola-starmie-sku1.dts | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT) 6 /dts-v1/; 7 #include "mt8186-corsola-starmie.dtsi" 11 compatible = "google,starmie-sku1", "google,starmie-sku4", 16 compatible = "starry,himax83102-j02", "himax,hx83102"; 21 compatible = "hid-over-i2c"; 22 reg = <0x4f>; 23 interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>; 24 pinctrl-names = "default"; 25 pinctrl-0 = <&touchscreen_pins>; [all …]
|
D | mt8183-kukui-katsu-sku32.dts | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT) 6 /dts-v1/; 7 #include "mt8183-kukui-kakadu.dtsi" 8 #include "mt8183-kukui-audio-da7219-rt1015p.dtsi" 12 chassis-type = "tablet"; 13 compatible = "google,katsu-sku32", "google,katsu", "mediatek,mt8183"; 19 reg = <0x5d>; 20 pinctrl-names = "default"; 21 pinctrl-0 = <&open_touch>; 23 interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>; [all …]
|
D | mt8183-kukui-katsu-sku38.dts | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT) 6 /dts-v1/; 7 #include "mt8183-kukui-kakadu.dtsi" 8 #include "mt8183-kukui-audio-rt1015p.dtsi" 12 chassis-type = "tablet"; 13 compatible = "google,katsu-sku38", "google,katsu", "mediatek,mt8183"; 19 reg = <0x5d>; 20 pinctrl-names = "default"; 21 pinctrl-0 = <&open_touch>; 23 interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>; [all …]
|
/linux-6.15/arch/arm/boot/dts/allwinner/ |
D | sun8i-t113s-mangopi-mq-r-t113.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 4 #include <dt-bindings/interrupt-controller/irq.h> 6 /dts-v1/; 8 #include "sun8i-t113s.dtsi" 9 #include "sunxi-d1s-t113-mangopi-mq-r.dtsi" 12 model = "MangoPi MQ-R-T113"; 13 compatible = "widora,mangopi-mq-r-t113", "allwinner,sun8i-t113s"; 21 cpu-supply = <®_vcc_core>; 25 cpu-supply = <®_vcc_core>; 30 reg = <1>; [all …]
|
/linux-6.15/arch/arm64/boot/dts/rockchip/ |
D | rk3328-orangepi-r1-plus.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 3 * Based on rk3328-nanopi-r2s.dts, which is: 4 * Copyright (c) 2020 David Bauer <mail@david-bauer.net> 7 /dts-v1/; 9 #include "rk3328-orangepi-r1-plus.dtsi" 13 compatible = "xunlong,orangepi-r1-plus", "rockchip,rk3328"; 17 phy-handle = <&rtl8211e>; 18 phy-mode = "rgmii"; 24 rtl8211e: ethernet-phy@1 { 25 reg = <1>; [all …]
|
/linux-6.15/arch/arm64/boot/dts/allwinner/ |
D | sun50i-a64-pine64-plus.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 4 #include "sun50i-a64-pine64.dts" 8 compatible = "pine64,pine64-plus", "allwinner,sun50i-a64"; 14 pinctrl-names = "default"; 15 pinctrl-0 = <&rgmii_pins>; 16 phy-mode = "rgmii-txid"; 17 phy-handle = <&ext_rgmii_phy>; 22 ext_rgmii_phy: ethernet-phy@1 { 23 compatible = "ethernet-phy-ieee802.3-c22"; 24 reg = <1>; [all …]
|
/linux-6.15/drivers/clk/sunxi/ |
D | clk-sun4i-tcon-ch1.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later 5 * Maxime Ripard <maxime.ripard@free-electrons.com> 8 #include <linux/clk-provider.h> 29 void __iomem *reg; member 38 u32 reg; in tcon_ch1_disable() local 40 spin_lock_irqsave(&tclk->lock, flags); in tcon_ch1_disable() 41 reg = readl(tclk->reg); in tcon_ch1_disable() 42 reg &= ~(TCON_CH1_SCLK2_GATE_BIT | TCON_CH1_SCLK1_GATE_BIT); in tcon_ch1_disable() 43 writel(reg, tclk->reg); in tcon_ch1_disable() 44 spin_unlock_irqrestore(&tclk->lock, flags); in tcon_ch1_disable() [all …]
|
/linux-6.15/arch/arm/boot/dts/microchip/ |
D | sama5d3_tcb1.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * sama5d3_tcb1.dtsi - Device Tree Include file for SAMA5D3 SoC with 9 #include <dt-bindings/pinctrl/at91.h> 10 #include <dt-bindings/interrupt-controller/irq.h> 11 #include <dt-bindings/clock/at91.h> 21 compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon"; 22 #address-cells = <1>; 23 #size-cells = <0>; 24 reg = <0xf8014000 0x100>; 27 clock-names = "t0_clk", "slow_clk";
|