| /linux-6.8/Documentation/devicetree/bindings/gpio/ |
| D | gpio.txt | 5 -----------------
7 GPIO properties should be named "[<name>-]gpios", with <name> being the purpose
8 of this GPIO for the device. While a non-existent <name> is considered valid
10 for new bindings. Also, GPIO properties named "[<name>-]gpio" are valid and old
24 and bit-banged data signals:
27 gpio-controller;
28 #gpio-cells = <2>;
32 data-gpios = <&gpio1 12 0>,
44 recommended to use the two-cell approach.
48 include/dt-bindings/gpio/gpio.h whenever possible:
[all …]
|
| /linux-6.8/Documentation/devicetree/bindings/serial/ |
| D | fsl-imx-uart.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/serial/fsl-imx-uart.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Fabio Estevam <festevam@gmail.com>
15 - const: fsl,imx1-uart
16 - const: fsl,imx21-uart
17 - items:
18 - enum:
19 - fsl,imx25-uart
[all …]
|
| /linux-6.8/arch/arm/boot/dts/amlogic/ |
| D | meson8b-mxq.dts | 1 // SPDX-License-Identifier: GPL-2.0 OR MIT
7 /dts-v1/;
9 #include <dt-bindings/gpio/gpio.h>
22 stdout-path = "serial0:115200n8";
27 reg = <0x40000000 0x40000000>;
30 vcck: regulator-vcck {
31 compatible = "pwm-regulator";
33 regulator-name = "VCCK";
34 regulator-min-microvolt = <860000>;
35 regulator-max-microvolt = <1140000>;
[all …]
|
| /linux-6.8/Documentation/devicetree/bindings/mmc/ |
| D | allwinner,sun4i-a10-mmc.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/mmc/allwinner,sun4i-a10-mmc.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - $ref: mmc-controller.yaml
13 - Chen-Yu Tsai <wens@csie.org>
14 - Maxime Ripard <mripard@kernel.org>
17 "#address-cells": true
18 "#size-cells": true
22 - const: allwinner,sun4i-a10-mmc
[all …]
|
| /linux-6.8/Documentation/devicetree/bindings/pwm/ |
| D | lpc1850-sct-pwm.txt | 1 * NXP LPC18xx State Configurable Timer - Pulse Width Modulator driver
4 - compatible: Should be "nxp,lpc1850-sct-pwm"
5 - reg: Should contain physical base address and length of pwm registers.
6 - clocks: Must contain an entry for each entry in clock-names.
7 See ../clock/clock-bindings.txt for details.
8 - clock-names: Must include the following entries.
9 - pwm: PWM operating clock.
10 - #pwm-cells: Should be 3. See pwm.yaml in this directory for the description
15 compatible = "nxp,lpc1850-sct-pwm";
16 reg = <0x40000000 0x1000>;
[all …]
|
| D | mediatek,pwm-disp.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/pwm/mediatek,pwm-disp.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Jitao Shi <jitao.shi@mediatek.com>
13 - $ref: pwm.yaml#
18 - enum:
19 - mediatek,mt2701-disp-pwm
20 - mediatek,mt6595-disp-pwm
21 - mediatek,mt8173-disp-pwm
[all …]
|
| /linux-6.8/Documentation/devicetree/bindings/media/i2c/ |
| D | ov8856.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
4 ---
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
11 - Sakari Ailus <sakari.ailus@linux.intel.com>
13 description: |-
14 The Omnivision OV8856 is a high performance, 1/4-inch, 8 megapixel, CMOS
15 image sensor that delivers 3264x2448 at 30fps. It provides full-frame,
16 sub-sampled, and windowed 10-bit MIPI images in various formats via the
18 through I2C and two-wire SCCB. The sensor output is available via CSI-2
19 serial data output (up to 4-lane).
[all …]
|
| /linux-6.8/Documentation/devicetree/bindings/spi/ |
| D | omap-spi.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/spi/omap-spi.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Aswath Govindraju <a-govindraju@ti.com>
13 - $ref: spi-controller.yaml#
18 - items:
19 - enum:
20 - ti,am654-mcspi
21 - ti,am4372-mcspi
[all …]
|
| /linux-6.8/arch/arm/boot/dts/st/ |
| D | stm32mp157a-icore-stm32mp1-edimm2.2.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
3 * Copyright (c) STMicroelectronics 2019 - All Rights Reserved
8 /dts-v1/;
10 #include "stm32mp157a-icore-stm32mp1.dtsi"
11 #include "stm32mp15-pinctrl.dtsi"
12 #include "stm32mp15xxaa-pinctrl.dtsi"
13 #include <dt-bindings/gpio/gpio.h>
17 compatible = "engicam,icore-stm32mp1-edimm2.2",
18 "engicam,icore-stm32mp1", "st,stm32mp157";
25 stdout-path = "serial0:115200n8";
[all …]
|
| /linux-6.8/Documentation/devicetree/bindings/iio/frequency/ |
| D | adi,adrf6780.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Antoniu Miclaus <antoniu.miclaus@analog.com>
21 - adi,adrf6780
23 reg:
26 spi-max-frequency:
34 clock-names:
36 - const: lo_in
38 clock-output-names:
[all …]
|
| /linux-6.8/arch/arm64/boot/dts/freescale/ |
| D | imx8mm-phygate-tauri-l.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
8 #include <dt-bindings/input/linux-event-codes.h>
9 #include <dt-bindings/leds/common.h>
10 #include "imx8mm-phycore-som.dtsi"
13 model = "PHYTEC phyGATE-Tauri-L-iMX8MM";
14 compatible = "phytec,imx8mm-phygate-tauri-l",
15 "phytec,imx8mm-phycore-som", "fsl,imx8mm";
18 stdout-path = &uart3;
21 can_osc_40m: clock-can {
[all …]
|
| /linux-6.8/drivers/i2c/busses/ |
| D | i2c-pca-isa.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * i2c-pca-isa.c driver for PCA9564 on ISA boards
19 #include <linux/i2c-algo-pca.h>
24 #define DRIVER "i2c-pca-isa"
28 static int irq = -1;
37 static void pca_isa_writebyte(void *pd, int reg, int val) in pca_isa_writebyte() argument
40 static char *names[] = { "T/O", "DAT", "ADR", "CON" }; in pca_isa_writebyte() local
41 printk(KERN_DEBUG "*** write %s at %#lx <= %#04x\n", names[reg], in pca_isa_writebyte()
42 base+reg, val); in pca_isa_writebyte()
44 outb(val, base+reg); in pca_isa_writebyte()
[all …]
|
| /linux-6.8/Documentation/devicetree/bindings/clock/ |
| D | baikal,bt1-ccu-div.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
4 ---
5 $id: http://devicetree.org/schemas/clock/baikal,bt1-ccu-div.yaml#
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
8 title: Baikal-T1 Clock Control Unit Dividers
11 - Serge Semin <fancer.lancer@gmail.com>
14 Clocks Control Unit is the core of Baikal-T1 SoC System Controller
18 IP-blocks or to groups of blocks (clock domains). The transformation is done
19 by means of an embedded into CCU PLLs and gateable/non-gateable dividers. The
22 registers. Baikal-T1 CCU is logically divided into the next components:
[all …]
|
| D | qcom,mmcc.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Jeffrey Hugo <quic_jhugo@quicinc.com>
11 - Taniya Das <quic_tdas@quicinc.com>
20 - qcom,mmcc-apq8064
21 - qcom,mmcc-apq8084
22 - qcom,mmcc-msm8226
23 - qcom,mmcc-msm8660
24 - qcom,mmcc-msm8960
[all …]
|
| /linux-6.8/arch/arm/boot/dts/ti/omap/ |
| D | omap3-zoom3.dts | 1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
5 /dts-v1/;
8 #include "omap-zoom-common.dtsi"
12 compatible = "ti,omap3-zoom3", "ti,omap3630", "ti,omap3";
16 cpu0-supply = <&vcc>;
22 reg = <0x80000000 0x20000000>; /* 512 MB */
25 vddvario: regulator-vddvario {
26 compatible = "regulator-fixed";
27 regulator-name = "vddvario";
[all …]
|
| D | am335x-icev2.dts | 1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/
11 /dts-v1/;
16 model = "TI AM3359 ICE-V2";
17 compatible = "ti,am3359-icev2", "ti,am33xx";
21 reg = <0x80000000 0x10000000>; /* 256 MB */
25 stdout-path = &uart3;
29 compatible = "regulator-fixed";
30 regulator-name = "vbat";
31 regulator-min-microvolt = <5000000>;
[all …]
|
| /linux-6.8/Documentation/devicetree/bindings/mtd/ |
| D | cadence-nand-controller.txt | 4 - compatible : "cdns,hp-nfc"
5 - reg : Contains two entries, each of which is a tuple consisting of a
9 - reg-names: should contain "reg" and "sdma"
10 - #address-cells: should be 1. The cell encodes the chip select connection.
11 - #size-cells : should be 0.
12 - interrupts : The interrupt number.
13 - clocks: phandle of the controller core clock (nf_clk).
16 - dmas: shall reference DMA channel associated to the NAND controller
17 - cdns,board-delay-ps : Estimated Board delay. The value includes the total
27 - reg: shall contain the native Chip Select ids from 0 to max supported by
[all …]
|
| D | mediatek,mtk-nfc.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/mtd/mediatek,mtk-nfc.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Xiangsheng Hou <xiangsheng.hou@mediatek.com>
15 - mediatek,mt2701-nfc
16 - mediatek,mt2712-nfc
17 - mediatek,mt7622-nfc
19 reg:
21 - description: Base physical address and size of NFI.
[all …]
|
| /linux-6.8/drivers/net/ethernet/sfc/ |
| D | nic.c | 1 // SPDX-License-Identifier: GPL-2.0-only
4 * Copyright 2005-2006 Fen Systems Ltd.
5 * Copyright 2006-2013 Solarflare Communications Inc.
34 buffer->addr = dma_alloc_coherent(&efx->pci_dev->dev, len, in efx_nic_alloc_buffer()
35 &buffer->dma_addr, gfp_flags); in efx_nic_alloc_buffer()
36 if (!buffer->addr) in efx_nic_alloc_buffer()
37 return -ENOMEM; in efx_nic_alloc_buffer()
38 buffer->len = len; in efx_nic_alloc_buffer()
44 if (buffer->addr) { in efx_nic_free_buffer()
45 dma_free_coherent(&efx->pci_dev->dev, buffer->len, in efx_nic_free_buffer()
[all …]
|
| /linux-6.8/arch/arm/boot/dts/nxp/mxs/ |
| D | imx23-evk.dts | 1 // SPDX-License-Identifier: GPL-2.0+
5 /dts-v1/;
10 compatible = "fsl,imx23-evk", "fsl,imx23";
14 reg = <0x40000000 0x08000000>;
17 reg_vddio_sd0: regulator-vddio-sd0 {
18 compatible = "regulator-fixed";
19 regulator-name = "vddio-sd0";
20 regulator-min-microvolt = <3300000>;
21 regulator-max-microvolt = <3300000>;
25 reg_lcd_3v3: regulator-lcd-3v3 {
[all …]
|
| /linux-6.8/Documentation/devicetree/bindings/phy/ |
| D | intel,keembay-phy-usb.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/phy/intel,keembay-phy-usb.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>
14 const: intel,keembay-usb-phy
16 reg:
18 - description: USB APB CPR (clock, power, reset) register
19 - description: USB APB slave register
21 reg-names:
[all …]
|
| /linux-6.8/arch/arm64/boot/dts/amlogic/ |
| D | meson-gx.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
12 #include <dt-bindings/gpio/gpio.h>
13 #include <dt-bindings/interrupt-controller/irq.h>
14 #include <dt-bindings/interrupt-controller/arm-gic.h>
15 #include <dt-bindings/power/meson-gxbb-power.h>
16 #include <dt-bindings/thermal/thermal.h>
19 interrupt-parent = <&gic>;
20 #address-cells = <2>;
21 #size-cells = <2>;
29 reserved-memory {
[all …]
|
| /linux-6.8/arch/arm/boot/dts/aspeed/ |
| D | aspeed-bmc-opp-nicole.dts | 1 // SPDX-License-Identifier: GPL-2.0+
3 /dts-v1/;
4 #include "aspeed-g5.dtsi"
5 #include <dt-bindings/gpio/aspeed-gpio.h>
9 compatible = "yadro,nicole-bmc", "aspeed,ast2500";
12 stdout-path = &uart5;
17 reg = <0x80000000 0x20000000>;
20 reserved-memory {
21 #address-cells = <1>;
22 #size-cells = <1>;
[all …]
|
| /linux-6.8/arch/arm/boot/dts/nxp/imx/ |
| D | imx6qdl-emcon-avari.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
15 reg_wall_5p0: reg-wall5p0 {
16 compatible = "regulator-fixed";
17 regulator-name = "Main-Supply";
18 regulator-min-microvolt = <5000000>;
19 regulator-max-microvolt = <5000000>;
20 regulator-always-on;
21 regulator-boot-on;
24 reg_base3p3: reg-base3p3 {
25 compatible = "regulator-fixed";
[all …]
|
| /linux-6.8/Documentation/devicetree/bindings/iio/adc/ |
| D | renesas,rcar-gyroadc.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/iio/adc/renesas,rcar-gyroadc.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Renesas R-Car GyroADC
10 - Marek Vasut <marek.vasut+renesas@gmail.com>
15 are sampled by the GyroADC block in a round-robin fashion and the result
23 - enum:
24 - renesas,r8a7791-gyroadc
25 - renesas,r8a7792-gyroadc
[all …]
|