Home
last modified time | relevance | path

Searched +full:orientation +full:- +full:gpios (Results 1 – 25 of 39) sorted by relevance

12

/linux-6.8/Documentation/devicetree/bindings/usb/
Dgpio-sbu-mux.yaml1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
4 $id: http://devicetree.org/schemas/usb/gpio-sbu-mux.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: GPIO-based SBU mux
10 - Bjorn Andersson <andersson@kernel.org>
13 In USB Type-C applications the SBU lines needs to be connected, disconnected
14 and swapped depending on the altmode and orientation. This binding describes
21 - enum:
22 - nxp,cbdtu02043
[all …]
Dqcom,wcd939x-usbss.yaml1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
4 $id: http://devicetree.org/schemas/usb/qcom,wcd939x-usbss.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Neil Armstrong <neil.armstrong@linaro.org>
13 Qualcomm WCD9390/WCD9395 is a standalone Hi-Fi audio codec IC with a
17 USB-C Mux subsystems are external to the IC, thus requiring DT port-endpoint
18 graph description to handle USB-C altmode & orientation switching for Audio
24 - const: qcom,wcd9390-usbss
25 - items:
[all …]
Donnn,nb7vpq904m.yaml1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: ON Semiconductor Type-C DisplayPort ALT Mode Linear Redriver
10 - Neil Armstrong <neil.armstrong@linaro.org>
15 - onnn,nb7vpq904m
20 vcc-supply:
23 enable-gpios: true
25 retimer-switch:
29 orientation-switch:
[all …]
/linux-6.8/Documentation/devicetree/bindings/soc/qcom/
Dqcom,pmic-glink.yaml1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/soc/qcom/qcom,pmic-glink.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
8 Type-C and other things.
11 - Bjorn Andersson <andersson@kernel.org>
15 platforms and implement USB Type-C handling and battery management. This
18 particularly the USB Type-C controllers relationship with USB and DisplayPort
24 - items:
25 - enum:
[all …]
/linux-6.8/arch/arm64/boot/dts/qcom/
Dsc8180x-lenovo-flex-5g.dts1 // SPDX-License-Identifier: BSD-3-Clause
3 * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
4 * Copyright (c) 2020-2023, Linaro Limited
7 /dts-v1/;
9 #include <dt-bindings/firmware/qcom,scm.h>
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/input/gpio-keys.h>
12 #include <dt-bindings/input/input.h>
13 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
15 #include "sc8180x-pmics.dtsi"
[all …]
Dsc8280xp-crd.dts1 // SPDX-License-Identifier: BSD-3-Clause
7 /dts-v1/;
9 #include <dt-bindings/gpio/gpio.h>
10 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
13 #include "sc8280xp-pmics.dtsi"
17 compatible = "qcom,sc8280xp-crd", "qcom,sc8280xp";
26 compatible = "pwm-backlight";
28 enable-gpios = <&pmc8280_1_gpios 8 GPIO_ACTIVE_HIGH>;
29 power-supply = <&vreg_edp_bl>;
31 pinctrl-names = "default";
[all …]
Dsc8180x-primus.dts1 // SPDX-License-Identifier: BSD-3-Clause
3 * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
4 * Copyright (c) 2020-2023, Linaro Limited
7 /dts-v1/;
9 #include <dt-bindings/firmware/qcom,scm.h>
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/input/gpio-keys.h>
12 #include <dt-bindings/input/input.h>
13 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
15 #include "sc8180x-pmics.dtsi"
[all …]
Dsm8550-qrd.dts1 // SPDX-License-Identifier: BSD-3-Clause
6 /dts-v1/;
8 #include <dt-bindings/leds/common.h>
9 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
23 compatible = "qcom,sm8550-qrd", "qcom,sm8550";
24 chassis-type = "handset";
31 wcd938x: audio-codec {
32 compatible = "qcom,wcd9385-codec";
34 pinctrl-names = "default";
35 pinctrl-0 = <&wcd_default>;
[all …]
Dsc8280xp-lenovo-thinkpad-x13s.dts1 // SPDX-License-Identifier: BSD-3-Clause
7 /dts-v1/;
9 #include <dt-bindings/gpio/gpio.h>
10 #include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
11 #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
12 #include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h>
13 #include <dt-bindings/input/gpio-keys.h>
14 #include <dt-bindings/input/input.h>
15 #include <dt-bindings/leds/common.h>
16 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
[all …]
Dsm8550-mtp.dts1 // SPDX-License-Identifier: BSD-3-Clause
6 /dts-v1/;
8 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
22 compatible = "qcom,sm8550-mtp", "qcom,sm8550";
23 chassis-type = "handset";
29 wcd938x: audio-codec {
30 compatible = "qcom,wcd9385-codec";
32 pinctrl-names = "default";
33 pinctrl-0 = <&wcd_default>;
35 qcom,micbias1-microvolt = <1800000>;
[all …]
Dsm8350-hdk.dts1 // SPDX-License-Identifier: BSD-3-Clause
3 * Copyright (c) 2020-2021, Linaro Limited
6 /dts-v1/;
8 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
19 compatible = "qcom,sm8350-hdk", "qcom,sm8350";
20 chassis-type = "embedded";
27 stdout-path = "serial0:115200n8";
30 hdmi-connector {
31 compatible = "hdmi-connector";
36 remote-endpoint = <&lt9611_out>;
[all …]
Dsm8150-hdk.dts1 // SPDX-License-Identifier: BSD-3-Clause
6 /dts-v1/;
8 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
9 #include <dt-bindings/gpio/gpio.h>
10 #include <dt-bindings/usb/pd.h>
18 compatible = "qcom,sm8150-hdk", "qcom,sm8150";
19 chassis-type = "embedded";
26 stdout-path = "serial0:115200n8";
29 vph_pwr: vph-pwr-regulator {
30 compatible = "regulator-fixed";
[all …]
/linux-6.8/Documentation/devicetree/bindings/media/i2c/
Dthine,thp7312.yaml1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
4 ---
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
11 - Paul Elder <paul.elder@@ideasonboard.com>
17 MIPI CSI-2 and parallel interfaces. It can also output on either MIPI CSI-2
23 - $ref: /schemas/media/video-interface-devices.yaml#
36 thine,boot-mode:
43 0 is for the SPI/2-wire slave boot, 1 is for the SPI master boot (from
46 reset-gpios:
52 vddcore-supply:
[all …]
Dgalaxycore,gc2145.yaml1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Alain Volmat <alain.volmat@foss.st.com>
15 1616V x 1232H active pixel array, on-chip 10-bit ADC, and image signal
16 processor allowing AE/AWB/interpolation/de-noise/color-conversion and
19 either through a parallel interface or through MIPI CSI-2.
22 - $ref: ../video-interface-devices.yaml#
34 powerdown-gpios:
37 reset-gpios:
[all …]
Dovti,ov64a40.yaml1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Jacopo Mondi <jacopo.mondi@ideasonboard.com>
13 - $ref: /schemas/media/video-interface-devices.yaml#
25 avdd-supply:
28 dvdd-supply:
31 dovdd-supply:
34 powerdown-gpios:
37 reset-gpios:
[all …]
Dovti,ov4689.yaml1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Mikhail Rudenko <mike.rudenko@gmail.com>
13 The Omnivision OV4689 is a high performance, 1/3-inch, 4 megapixel
16 interface, and sensor output is sent via 1/2/4 lane MIPI CSI-2
20 - $ref: /schemas/media/video-interface-devices.yaml#
31 External clock (XVCLK) for the sensor, 6-64 MHz
34 dovdd-supply:
36 Digital I/O voltage supply, 1.7-3.0 V
[all …]
Dhynix,hi846.yaml1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: SK Hynix Hi-846 1/4" 8M Pixel MIPI CSI-2 sensor
10 - Martin Kepplinger <martin.kepplinger@puri.sm>
12 description: |-
13 The Hi-846 is a raw image sensor with an MIPI CSI-2 image data
18 - $ref: /schemas/media/video-interface-devices.yaml#
29 - description: Reference to the mclk clock.
31 assigned-clocks:
[all …]
Dsony,imx415.yaml1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Michael Riesch <michael.riesch@wolfvision.net>
12 description: |-
14 solid-state image sensor with a square pixel array and 8.46 M effective
18 available via CSI-2 serial data output (two or four lanes).
21 - $ref: ../video-interface-devices.yaml#
34 avdd-supply:
37 dvdd-supply:
[all …]
Dovti,ov5675.yaml1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
4 ---
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
11 - Quentin Schulz <quentin.schulz@theobroma-systems.com>
14 - $ref: /schemas/media/video-interface-devices.yaml#
17 The Omnivision OV5675 is a high performance, 1/5-inch, 5 megapixel, CMOS
18 image sensor that delivers 2592x1944 at 30fps. It provides full-frame,
19 sub-sampled, and windowed 10-bit MIPI images in various formats via the
22 This chip is programmable through I2C and two-wire SCCB. The sensor output
23 is available via CSI-2 serial data output (up to 2-lane).
[all …]
Dovti,ov5693.yaml1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
4 ---
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
11 - Tommaso Merciai <tomm.merciai@gmail.com>
14 The Omnivision OV5693/OV5695 are high performance, 1/4-inch, 5 megapixel, CMOS
15 image sensors that deliver 2592x1944 at 30fps. It provides full-frame,
16 sub-sampled, and windowed 10-bit MIPI images in various formats via the
19 OV5693/OV5695 are controlled via I2C and two-wire Serial Camera Control Bus
20 (SCCB). The sensor output is available via CSI-2 serial data output (up to
21 2-lane).
[all …]
/linux-6.8/drivers/gpu/drm/panel/
Dpanel-lvds.c1 // SPDX-License-Identifier: GPL-2.0+
42 enum drm_panel_orientation orientation; member
54 if (lvds->enable_gpio) in panel_lvds_unprepare()
55 gpiod_set_value_cansleep(lvds->enable_gpio, 0); in panel_lvds_unprepare()
57 if (lvds->supply) in panel_lvds_unprepare()
58 regulator_disable(lvds->supply); in panel_lvds_unprepare()
67 if (lvds->supply) { in panel_lvds_prepare()
70 err = regulator_enable(lvds->supply); in panel_lvds_prepare()
72 dev_err(lvds->dev, "failed to enable supply: %d\n", in panel_lvds_prepare()
78 if (lvds->enable_gpio) in panel_lvds_prepare()
[all …]
/linux-6.8/Documentation/driver-api/media/
Dcamera-sensor.rst1 .. SPDX-License-Identifier: GPL-2.0
8 This document covers the in-kernel APIs only. For the best practices on
12 CSI-2, parallel and BT.656 buses
13 --------------------------------
15 Please see :ref:`transmitter-receiver`.
18 ---------------
29 elsewhere. Therefore only the pre-determined frequencies are configurable by the
35 Read the ``clock-frequency`` _DSD property to denote the frequency. The driver
41 The preferred way to achieve this is using ``assigned-clocks``,
42 ``assigned-clock-parents`` and ``assigned-clock-rates`` properties. See the
[all …]
/linux-6.8/arch/arm64/boot/dts/freescale/
Dimx8qxp-mek.dts1 // SPDX-License-Identifier: GPL-2.0+
6 /dts-v1/;
9 #include <dt-bindings/usb/pd.h>
13 compatible = "fsl,imx8qxp-mek", "fsl,imx8qxp";
16 stdout-path = &lpuart0;
24 reg_usdhc2_vmmc: usdhc2-vmmc {
25 compatible = "regulator-fixed";
26 regulator-name = "SD1_SPWR";
27 regulator-min-microvolt = <3000000>;
28 regulator-max-microvolt = <3000000>;
[all …]
/linux-6.8/drivers/pinctrl/
Dpinctrl-amd.c1 // SPDX-License-Identifier: GPL-2.0-only
31 #include <linux/pinctrl/pinconf-generic.h>
36 #include "pinctrl-utils.h"
37 #include "pinctrl-amd.h"
45 raw_spin_lock_irqsave(&gpio_dev->lock, flags); in amd_gpio_get_direction()
46 pin_reg = readl(gpio_dev->base + offset * 4); in amd_gpio_get_direction()
47 raw_spin_unlock_irqrestore(&gpio_dev->lock, flags); in amd_gpio_get_direction()
61 raw_spin_lock_irqsave(&gpio_dev->lock, flags); in amd_gpio_direction_input()
62 pin_reg = readl(gpio_dev->base + offset * 4); in amd_gpio_direction_input()
64 writel(pin_reg, gpio_dev->base + offset * 4); in amd_gpio_direction_input()
[all …]
/linux-6.8/arch/arm/boot/dts/ti/omap/
Dam335x-osd3358-sm-red.dts1 //SPDX-License-Identifier: GPL-2.0
2 /* Copyright (C) 2018 Octavo Systems LLC - https://www.octavosystems.com/
9 /dts-v1/;
12 #include "am335x-osd335x-common.dtsi"
13 #include <dt-bindings/interrupt-controller/irq.h>
15 #include <dt-bindings/display/tda998x.h>
18 model = "Octavo Systems OSD3358-SM-RED";
19 compatible = "oct,osd3358-sm-refdesign", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
23 regulator-min-microvolt = <1800000>;
24 regulator-max-microvolt = <1800000>;
[all …]

12