| /linux-5.10/arch/arm64/boot/dts/freescale/ |
| D | fsl-ls1028a-kontron-sl28-var2.dts | 1 // SPDX-License-Identifier: GPL-2.0+
3 * Device Tree file for the Kontron SMARC-sAL28 board.
12 /dts-v1/;
13 #include "fsl-ls1028a-kontron-sl28.dts"
16 model = "Kontron SMARC-sAL28 (TSN-on-module)";
17 compatible = "kontron,sl28-var2", "kontron,sl28", "fsl,ls1028a";
21 phy0: ethernet-phy@5 {
23 eee-broken-1000t;
24 eee-broken-100tx;
27 phy1: ethernet-phy@4 {
[all …]
|
| D | fsl-ls1028a-kontron-sl28-var4.dts | 1 // SPDX-License-Identifier: GPL-2.0+
3 * Device Tree file for the Kontron SMARC-sAL28 board.
12 /dts-v1/;
13 #include "fsl-ls1028a-kontron-sl28.dts"
14 #include <dt-bindings/net/qca-ar803x.h>
17 model = "Kontron SMARC-sAL28 (Dual PHY)";
18 compatible = "kontron,sl28-var4", "kontron,sl28", "fsl,ls1028a";
22 phy-handle = <&phy1>;
23 phy-connection-type = "rgmii-id";
27 #address-cells = <1>;
[all …]
|
| D | fsl-lx2160a-rdb.dts | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
7 /dts-v1/;
9 #include "fsl-lx2160a.dtsi"
13 compatible = "fsl,lx2160a-rdb", "fsl,lx2160a";
21 stdout-path = "serial0:115200n8";
24 sb_3v3: regulator-sb3v3 {
25 compatible = "regulator-fixed";
26 regulator-name = "MC34717-3.3VSB";
27 regulator-min-microvolt = <3300000>;
28 regulator-max-microvolt = <3300000>;
[all …]
|
| D | fsl-ls1028a-kontron-sl28.dts | 1 // SPDX-License-Identifier: GPL-2.0+
3 * Device Tree file for the Kontron SMARC-sAL28 board.
9 /dts-v1/;
10 #include "fsl-ls1028a.dtsi"
11 #include <dt-bindings/interrupt-controller/irq.h>
12 #include <dt-bindings/gpio/gpio.h>
13 #include <dt-bindings/input/input.h>
16 model = "Kontron SMARC-sAL28";
29 compatible = "gpio-keys";
31 power-button {
[all …]
|
| D | imx8mp-evk.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
12 compatible = "fsl,imx8mp-evk", "fsl,imx8mp";
15 stdout-path = &uart2;
18 gpio-leds {
19 compatible = "gpio-leds";
20 pinctrl-names = "default";
21 pinctrl-0 = <&pinctrl_gpio_led>;
26 default-state = "on";
36 reg_usdhc2_vmmc: regulator-usdhc2 {
[all …]
|
| /linux-5.10/Documentation/devicetree/bindings/net/ |
| D | ethernet-phy.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/net/ethernet-phy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Andrew Lunn <andrew@lunn.ch>
11 - Florian Fainelli <f.fainelli@gmail.com>
12 - Heiner Kallweit <hkallweit1@gmail.com>
14 # The dt-schema tools will generate a select statement first by using
21 pattern: "^ethernet-phy(@[a-f0-9]+)?$"
24 - $nodename
[all …]
|
| /linux-5.10/drivers/net/phy/ |
| D | phy-core.c | 1 // SPDX-License-Identifier: GPL-2.0+
10 * phy_speed_to_str - Return a string representing the PHY link speed
55 return "Unsupported (update phy-core.c)"; in phy_speed_to_str()
61 * phy_duplex_to_str - Return string describing the duplex
73 return "Unsupported (update phy-core.c)"; in phy_duplex_to_str()
79 * - iow, descending speed. */
164 PHY_SETTING( 1000, FULL, 1000baseKX_Full ),
165 PHY_SETTING( 1000, FULL, 1000baseT_Full ),
166 PHY_SETTING( 1000, HALF, 1000baseT_Half ),
167 PHY_SETTING( 1000, FULL, 1000baseT1_Full ),
[all …]
|
| D | phylink.c | 1 // SPDX-License-Identifier: GPL-2.0
4 * technologies such as SFP cages where the PHY is hot-pluggable.
38 * struct phylink - internal data type for phylink
55 u8 link_port; /* The current non-phy ethtool port */
84 if ((pl)->config->type == PHYLINK_NETDEV) \
85 netdev_printk(level, (pl)->netdev, fmt, ##__VA_ARGS__); \
86 else if ((pl)->config->type == PHYLINK_DEV) \
87 dev_printk(level, (pl)->dev, fmt, ##__VA_ARGS__); \
99 if ((pl)->config->type == PHYLINK_NETDEV) \
100 netdev_dbg((pl)->netdev, fmt, ##__VA_ARGS__); \
[all …]
|
| D | phy_device.c | 1 // SPDX-License-Identifier: GPL-2.0+
138 /* 10/100 half/full + 1000 half/full */ in features_init()
149 /* 10/100 half/full + 1000 half/full + fibre*/ in features_init()
163 /* 10/100 half/full + 1000 half/full + TP/MII/FIBRE/AUI/BNC/Backplane*/ in features_init()
174 /* 10/100 half/full + 1000 half/full + 10G full*/ in features_init()
188 /* 10/100/1000/10G full */ in features_init()
203 put_device(&phydev->mdio.dev); in phy_device_free()
236 struct device_driver *drv = phydev->mdio.dev.driver; in mdio_bus_phy_may_suspend()
238 struct net_device *netdev = phydev->attached_dev; in mdio_bus_phy_may_suspend()
240 if (!drv || !phydrv->suspend) in mdio_bus_phy_may_suspend()
[all …]
|
| /linux-5.10/arch/arm64/boot/dts/amlogic/ |
| D | meson-gxl-s905d-p230.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
7 /dts-v1/;
9 #include <dt-bindings/input/input.h>
11 #include "meson-gxl-s905d.dtsi"
12 #include "meson-gx-p23x-q20x.dtsi"
15 compatible = "amlogic,p230", "amlogic,s905d", "amlogic,meson-gxl";
18 adc-keys {
19 compatible = "adc-keys";
20 io-channels = <&saradc 0>;
21 io-channel-names = "buttons";
[all …]
|
| D | meson-g12a-x96-max.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
8 #include "meson-g12a.dtsi"
9 #include <dt-bindings/gpio/gpio.h>
10 #include <dt-bindings/gpio/meson-g12a-gpio.h>
11 #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
14 compatible = "amediatech,x96-max", "amlogic,g12a";
22 spdif_dit: audio-codec-1 {
23 #sound-dai-cells = <0>;
24 compatible = "linux,spdif-dit";
[all …]
|
| D | meson-axg-s400.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
8 #include "meson-axg.dtsi"
9 #include <dt-bindings/input/input.h>
12 compatible = "amlogic,s400", "amlogic,a113d", "amlogic,meson-axg";
16 compatible = "adc-keys";
17 io-channels = <&saradc 0>;
18 io-channel-names = "buttons";
19 keyup-threshold-microvolt = <1800000>;
21 button-next {
[all …]
|
| /linux-5.10/arch/arm/boot/dts/ |
| D | am335x-baltos.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
12 #include <dt-bindings/pwm/pwm.h>
13 #include <dt-bindings/interrupt-controller/irq.h>
20 cpu0-supply = <&vdd1_reg>;
30 compatible = "regulator-fixed";
31 regulator-name = "vbat";
32 regulator-min-microvolt = <5000000>;
33 regulator-max-microvolt = <5000000>;
34 regulator-boot-on;
[all …]
|
| D | am5729-beagleboneai.dts | 1 // SPDX-License-Identifier: GPL-2.0
3 * Copyright (C) 2014-2019 Texas Instruments Incorporated - http://www.ti.com/
6 /dts-v1/;
9 #include "am57xx-commercial-grade.dtsi"
10 #include "dra74x-mmc-iodelay.dtsi"
11 #include "dra74-ipu-dsp-common.dtsi"
12 #include <dt-bindings/gpio/gpio.h>
13 #include <dt-bindings/interrupt-controller/irq.h>
14 #include <dt-bindings/pinctrl/dra.h>
18 compatible = "beagle,am5729-beagleboneai", "ti,am5728",
[all …]
|
| /linux-5.10/drivers/net/ethernet/samsung/sxgbe/ |
| D | sxgbe_main.c | 1 // SPDX-License-Identifier: GPL-2.0-only
14 #include <linux/dma-mapping.h>
51 /* The default timer value as per the sxgbe specification 1 sec(1000 ms) */
52 #define SXGBE_DEFAULT_LPI_TIMER 1000
54 static int debug = -1;
73 * sxgbe_verify_args - verify the driver parameters.
86 if (!priv->tx_path_in_lpi_mode) in sxgbe_enable_eee_mode()
87 priv->hw->mac->set_eee_mode(priv->ioaddr); in sxgbe_enable_eee_mode()
92 /* Exit and disable EEE in case of we are are in LPI state. */ in sxgbe_disable_eee_mode()
93 priv->hw->mac->reset_eee_mode(priv->ioaddr); in sxgbe_disable_eee_mode()
[all …]
|
| /linux-5.10/drivers/net/ethernet/stmicro/stmmac/ |
| D | stmmac_main.c | 1 // SPDX-License-Identifier: GPL-2.0-only
3 This is the driver for the ST MAC 10/100/1000 on-chip Ethernet controllers.
6 Copyright(C) 2007-2011 STMicroelectronics Ltd
29 #include <linux/dma-mapping.h>
50 #define TSO_MAX_BUFF_SIZE (SZ_16K - 1)
58 static int debug = -1;
60 MODULE_PARM_DESC(debug, "Message Level (-1: default, 0: no output, 16: all)");
62 static int phyaddr = -1;
66 #define STMMAC_TX_THRESH(x) ((x)->dma_tx_size / 4)
67 #define STMMAC_RX_THRESH(x) ((x)->dma_rx_size / 4)
[all …]
|
| /linux-5.10/drivers/net/ethernet/broadcom/ |
| D | tg3.c | 7 * Copyright (C) 2005-2016 Broadcom Corporation.
8 * Copyright (C) 2016-2017 Broadcom Limited.
14 * Copyright (C) 2000-2016 Broadcom Corporation.
15 * Copyright (C) 2016-2017 Broadcom Ltd.
52 #include <linux/dma-mapping.h>
56 #include <linux/hwmon-sysfs.h>
92 _tg3_flag(TG3_FLAG_##flag, (tp)->tg3_flags)
94 _tg3_flag_set(TG3_FLAG_##flag, (tp)->tg3_flags)
96 _tg3_flag_clear(TG3_FLAG_##flag, (tp)->tg3_flags)
122 * and dev->tx_timeout() should be called to fix the problem
[all …]
|
| /linux-5.10/drivers/net/ethernet/realtek/ |
| D | r8169_main.c | 1 // SPDX-License-Identifier: GPL-2.0-only
6 * Copyright (c) 2003 - 2007 Francois Romieu <romieu@fr.zoreil.com>
26 #include <linux/dma-mapping.h>
38 #define FIRMWARE_8168D_1 "rtl_nic/rtl8168d-1.fw"
39 #define FIRMWARE_8168D_2 "rtl_nic/rtl8168d-2.fw"
40 #define FIRMWARE_8168E_1 "rtl_nic/rtl8168e-1.fw"
41 #define FIRMWARE_8168E_2 "rtl_nic/rtl8168e-2.fw"
42 #define FIRMWARE_8168E_3 "rtl_nic/rtl8168e-3.fw"
43 #define FIRMWARE_8168F_1 "rtl_nic/rtl8168f-1.fw"
44 #define FIRMWARE_8168F_2 "rtl_nic/rtl8168f-2.fw"
[all …]
|
| /linux-5.10/drivers/net/ethernet/marvell/ |
| D | sky2.c | 1 // SPDX-License-Identifier: GPL-2.0-only
7 * of the original driver such as link fail-over and link management because
19 #include <linux/dma-mapping.h>
54 #define RX_MAX_PENDING (RX_LE_SIZE/6 - 2)
66 #define PHY_RETRIES 1000
70 #define RING_NEXT(x, s) (((x)+1) & ((s)-1))
77 static int debug = -1; /* defaults above */
85 static int disable_msi = -1;
94 { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) }, /* SK-9Sxx */
95 { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, /* SK-9Exx */
[all …]
|
| /linux-5.10/drivers/net/ethernet/intel/igb/ |
| D | igb_main.c | 1 // SPDX-License-Identifier: GPL-2.0
2 /* Copyright(c) 2007 - 2018 Intel Corporation. */
57 "Copyright (c) 2007-2014 Intel Corporation.";
235 MODULE_AUTHOR("Intel Corporation, <e1000-devel@lists.sourceforge.net>");
240 static int debug = -1;
285 /* igb_regdump - register printout routine */
292 switch (reginfo->ofs) { in igb_regdump()
342 pr_info("%-15s %08x\n", reginfo->name, rd32(reginfo->ofs)); in igb_regdump()
346 snprintf(rname, 16, "%s%s", reginfo->name, "[0-3]"); in igb_regdump()
347 pr_info("%-15s %08x %08x %08x %08x\n", rname, regs[0], regs[1], in igb_regdump()
[all …]
|
| /linux-5.10/drivers/net/ethernet/intel/ixgbe/ |
| D | ixgbe_main.c | 1 // SPDX-License-Identifier: GPL-2.0
2 /* Copyright(c) 1999 - 2018 Intel Corporation. */
61 "Copyright (c) 1999-2016 Intel Corporation.";
76 /* ixgbe_pci_tbl - PCI Device ID Table
151 …"Maximum number of virtual functions to allocate per physical function - default is zero and maxim…
157 "Allow unsupported and untested SFP+ modules on 82599-based adapters");
160 static int debug = -1;
177 return dev && (dev->netdev_ops == &ixgbe_netdev_ops); in netif_is_ixgbe()
186 parent_bus = adapter->pdev->bus->parent; in ixgbe_read_pci_cfg_word_parent()
188 return -1; in ixgbe_read_pci_cfg_word_parent()
[all …]
|
| /linux-5.10/drivers/net/ethernet/broadcom/bnx2x/ |
| D | bnx2x_main.c | 3 * Copyright (c) 2007-2013 Broadcom Corporation
37 #include <linux/dma-mapping.h>
77 #define FW_FILE_NAME_E1 "bnx2x/bnx2x-e1-" FW_FILE_VERSION ".fw"
78 #define FW_FILE_NAME_E1H "bnx2x/bnx2x-e1h-" FW_FILE_VERSION ".fw"
79 #define FW_FILE_NAME_E2 "bnx2x/bnx2x-e2-" FW_FILE_VERSION ".fw"
105 MODULE_PARM_DESC(int_mode, " Force interrupt mode other than MSI-X "
112 static int mrrs = -1;
367 pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS, addr); in bnx2x_reg_wr_ind()
368 pci_write_config_dword(bp->pdev, PCICFG_GRC_DATA, val); in bnx2x_reg_wr_ind()
369 pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS, in bnx2x_reg_wr_ind()
[all …]
|