| /linux-5.10/Documentation/devicetree/bindings/clock/ |
| D | brcm,iproc-clocks.txt | 8 LCPLL0, MIPIPLL, and etc., all derived from an onboard crystal. Each PLL
26 onboard crystal with a fixed rate
51 reference clock of the onboard crystal
66 crystal
103 crystal N/A N/A N/A
105 armpll crystal N/A N/A
107 keypad crystal (ASIU) 0 BCM_CYGNUS_ASIU_KEYPAD_CLK
108 adc/tsc crystal (ASIU) 1 BCM_CYGNUS_ASIU_ADC_CLK
109 pwm crystal (ASIU) 2 BCM_CYGNUS_ASIU_PWM_CLK
111 genpll crystal 0 BCM_CYGNUS_GENPLL
[all …]
|
| D | idt,versaclock5.yaml | 97 # Devices with builtin crystal + optional external input
104 # Devices without builtin crystal
115 /* 25MHz reference crystal */
|
| D | vf610-clock.txt | 16 - sxosc (external crystal oscillator 32KHz, recommended)
17 - fxosc (external crystal oscillator 24MHz, recommended)
|
| D | rockchip,rk3188-cru.txt | 32 - "xin24m" - crystal input - required,
34 - "xin27m" - 27mhz crystal input on rk3066 - optional,
|
| /linux-5.10/drivers/gpu/drm/nouveau/nvkm/subdev/clk/ |
| D | pllnv04.c | 48 int crystal = info->refclk; in getMNP_single() local
55 /* possibly correlated with introduction of 27MHz crystal */ in getMNP_single()
93 if (crystal/M < minU) in getMNP_single()
95 if (crystal/M > maxU) in getMNP_single()
98 /* add crystal/2 to round better */ in getMNP_single()
99 N = (clkP * M + crystal/2) / crystal; in getMNP_single()
107 calcclk = ((N * crystal + P/2) / P + M/2) / M; in getMNP_single()
149 int crystal = info->refclk; in getMNP_double() local
165 if (crystal/M1 < minU1) in getMNP_double()
167 if (crystal/M1 > maxU1) in getMNP_double()
[all …]
|
| /linux-5.10/arch/powerpc/boot/ |
| D | mpc8xx.c | 19 /* Return system clock from crystal frequency */
20 u32 mpc885_get_clock(u32 crystal) in mpc885_get_clock() argument
46 ret = crystal * mfi; in mpc885_get_clock()
49 ret += crystal * mfn / (mfd + 1); in mpc885_get_clock()
70 int mpc885_fixup_clocks(u32 crystal) in mpc885_fixup_clocks() argument
72 u32 sysclk = mpc885_get_clock(crystal); in mpc885_fixup_clocks()
|
| D | pq2.c | 25 /* Get various clocks from crystal frequency.
28 int pq2_get_clocks(u32 crystal, u32 *sysfreq, u32 *corefreq, in pq2_get_clocks() argument
50 mainclk = crystal * (pllmf + 1) / (plldf + 1); in pq2_get_clocks()
90 int pq2_fixup_clocks(u32 crystal) in pq2_fixup_clocks() argument
94 if (!pq2_get_clocks(crystal, &sysfreq, &corefreq, &timebase, &brgfreq)) in pq2_fixup_clocks()
|
| D | mpc8xx.h | 9 u32 mpc885_get_clock(u32 crystal);
10 int mpc885_fixup_clocks(u32 crystal);
|
| D | pq2.h | 7 int pq2_get_clocks(u32 crystal, u32 *sysfreq, u32 *corefreq,
10 int pq2_fixup_clocks(u32 crystal);
|
| /linux-5.10/drivers/acpi/pmic/ |
| D | intel_pmic_chtcrc.c | 3 * Intel Cherry Trail Crystal Cove PMIC operation region driver
16 * We have no docs for the CHT Crystal Cove PMIC. The Asus Zenfone-2 kernel
17 * code has 2 Crystal Cove regulator drivers, one calls the PMIC a "Crystal
24 * CHT Crystal Cove PMIC.
|
| D | Kconfig | 14 bool "ACPI operation region support for Bay Trail Crystal Cove PMIC"
18 version of the Crystal Cove PMIC.
21 bool "ACPI operation region support for Cherry Trail Crystal Cove PMIC"
25 version of the Crystal Cove PMIC.
|
| /linux-5.10/drivers/tty/serial/ |
| D | max3100.c | 15 .crystal = 0,
116 int crystal; /* 1 if 3.6864Mhz crystal 0 for 1.8432 */ member
439 if (s->crystal) in max3100_set_termios()
445 param_new = 14 + s->crystal; in max3100_set_termios()
448 param_new = 13 + s->crystal; in max3100_set_termios()
451 param_new = 12 + s->crystal; in max3100_set_termios()
454 param_new = 11 + s->crystal; in max3100_set_termios()
457 param_new = 10 + s->crystal; in max3100_set_termios()
460 param_new = 9 + s->crystal; in max3100_set_termios()
463 param_new = 8 + s->crystal; in max3100_set_termios()
[all …]
|
| /linux-5.10/Documentation/devicetree/bindings/rtc/ |
| D | stmp3xxx-rtc.txt | 11 - stmp,crystal-freq: override crystal frequency as determined from fuse bits.
13 "no crystal".
|
| /linux-5.10/include/linux/ |
| D | serial_max3100.h | 15 * @crystal: 1 for 3.6864 Mhz, 0 for 1.8432
26 * .crystal = 0,
43 int crystal; member
|
| /linux-5.10/Documentation/devicetree/bindings/mips/cavium/ |
| D | uctl.txt | 20 either "crystal" or "external".
31 /* Either "crystal" or "external" */
32 refclk-type = "crystal";
|
| /linux-5.10/Documentation/devicetree/bindings/net/wireless/ |
| D | esp,esp8089.txt | 12 - esp,crystal-26M-en: Integer value for the crystal_26M_en firmware parameter
28 esp,crystal-26M-en = <2>;
|
| /linux-5.10/drivers/rtc/ |
| D | rtc-stmp3xxx.c | 301 * This clock can be provided by an external 32k crystal. If that one is in stmp3xxx_rtc_probe()
313 of_property_read_u32(pdev->dev.of_node, "stmp,crystal-freq", in stmp3xxx_rtc_probe()
318 /* keep 32kHz crystal running in low-power mode */ in stmp3xxx_rtc_probe()
325 /* keep 32.768kHz crystal running in low-power mode */ in stmp3xxx_rtc_probe()
333 "invalid crystal-freq specified in device-tree. Assuming no crystal\n"); in stmp3xxx_rtc_probe()
|
| /linux-5.10/sound/isa/cs423x/ |
| D | cs4236.c | 27 "{{Crystal Semiconductors,CS4235},"
28 "{Crystal Semiconductors,CS4236},"
29 "{Crystal Semiconductors,CS4237},"
30 "{Crystal Semiconductors,CS4238},"
31 "{Crystal Semiconductors,CS4239},"
34 "{Crystal,3D},"
35 "{Crystal Computer,TidalWave128},"
174 /* Crystal Computer TidalWave128 */
180 /* Crystal 3D - CS4237B */
184 /* Crystal CX4235-XQ3 EP - CS4235 */
[all …]
|
| /linux-5.10/arch/arm/mach-s3c/ |
| D | init.c | 67 * given master crystal value.
69 * xtal = 0 -> use default PLL crystal value (normally 12MHz)
70 * != 0 -> PLL crystal value in Hz
|
| /linux-5.10/Documentation/devicetree/bindings/usb/ |
| D | octeon-usb.txt | 25 "crystal" or "external".
54 cavium,refclk-type = "crystal";
|
| /linux-5.10/arch/x86/kernel/ |
| D | tsc_msr.c | 24 * use a 25 MHz crystal and Cherry Trail uses a 19.2 MHz crystal, the crystal
138 * 24 MHz crystal? : 24 * 13 / 4 = 78 MHz
|
| /linux-5.10/drivers/staging/rtl8723bs/hal/ |
| D | odm_CfoTracking.c | 246 "ODM_CfoTracking(): Crystal cap offset = %d\n", in ODM_CfoTracking()
252 /* 4 1.7 Adjust Crystal Cap. */ in ODM_CfoTracking()
271 "ODM_CfoTracking(): Crystal cap = 0x%x, Default Crystal cap = 0x%x\n", in ODM_CfoTracking()
|
| /linux-5.10/drivers/gpu/drm/nouveau/nvkm/subdev/therm/ |
| D | gf119.c | 113 return (device->crystal * 1000) / 20; in gf119_fan_pwm_clock()
115 return device->crystal * 1000 / 10; in gf119_fan_pwm_clock()
129 nvkm_wr32(device, 0x00e724, device->crystal * 1000); in gf119_therm_init()
|
| /linux-5.10/Documentation/devicetree/bindings/sound/ |
| D | cs43130.txt | 20 When external MCLK is generated by external crystal
22 for external crystal. Amount of bias current sent is
|
| /linux-5.10/Documentation/input/devices/ |
| D | cs461x.rst | 1 Crystal SoundFusion CS4610/CS4612/CS461 joystick
5 Crystal SoundFusion CS4610/CS4612/CS4615. This code is based upon
|