Searched full:cards (Results 1 – 25 of 1341) sorted by relevance
12345678910>>...54
/linux-5.10/drivers/media/pci/ttpci/ |
D | Kconfig | 8 tristate "AV7110 cards" 22 Support for SAA7146 and AV7110 based DVB cards as produced 25 This driver only supports the fullfeatured cards with 55 tristate "SAA7146 DVB cards (aka Budget, Nova-PCI)" 60 Support for simple SAA7146 based DVB cards 61 (so called Budget- or Nova-PCI cards) without onboard 65 tristate "Budget cards" 81 Support for simple SAA7146 based DVB cards (so called Budget- 82 or Nova-PCI cards) without onboard MPEG2 decoder, and without 91 tristate "Budget cards with onboard CI connector" [all …]
|
/linux-5.10/drivers/net/wireless/intersil/orinoco/ |
D | Kconfig | 14 A driver for 802.11b wireless cards based on the "Hermes" or 16 majority of the PCMCIA 802.11b cards (which are nearly all rebadges) 17 - except for the Cisco/Aironet cards. Cards supported include the 26 Hermes cards, PLX9052 based PCI adaptors or the Apple Airport below. 68 the BCM43xx driver for Airport Extreme cards. 74 Enable support for PCMCIA cards supported by the "Hermes" (aka 78 802.11b PCMCIA cards can be used in desktop machines. The Netgear 85 Enable support for PCMCIA cards supported by the "Hermes" (aka 89 802.11b PCMCIA cards can be used in desktop machines. 95 Enable support for PCMCIA cards supported by the "Hermes" (aka [all …]
|
/linux-5.10/drivers/isdn/hardware/mISDN/ |
D | Kconfig | 8 tristate "Support for HFC PCI cards" 12 Enable support for cards with Cologne Chip AG's 16 tristate "Support for HFC multiport cards (HFC-4S/8S/E1)" 20 Enable support for cards with Cologne Chip AG's HFC multiport 49 Enable support for AVMs FRITZ!CARD PCI cards 61 tristate "Support for cards with Infineon chipset" 66 Enable support for cards with ISAC + HSCX, IPAC or IPAC-SX 70 tristate "Support for cards with Winbond 6692" 74 Enable support for Winbond 6692 PCI chip based cards. 77 tristate "Support for NETJet cards" [all …]
|
/linux-5.10/drivers/pcmcia/ |
D | Kconfig | 10 Say Y here if you want to attach PCMCIA- or PC-cards to your Linux 11 computer. These are credit-card size devices such as network cards, 13 actually two varieties of these cards: 16 bit PCMCIA and 32 bit 14 CardBus cards. 26 This option enables support for 16-bit PCMCIA cards. Most older 27 PC-cards are such 16-bit PCMCIA cards, so unless you know you're 28 only using 32-bit CardBus cards, say Y or M here. 30 To use 16-bit PCMCIA cards, you will need supporting software in 45 Some PCMCIA cards require an updated Card Information Structure (CIS) 58 CardBus is a bus mastering architecture for PC-cards, which allows [all …]
|
/linux-5.10/drivers/media/pci/bt8xx/ |
D | Kconfig | 26 tristate "DVB/ATSC Support for bt878 based TV cards" 37 Support for PCI cards based on the Bt8xx PCI bridge. Examples are 38 the Nebula cards, the Pinnacle PCTV cards, the Twinhan DST cards, 39 the pcHDTV HD2000 cards, the DViCO FusionHDTV Lite cards, and 40 some AVerMedia cards. 42 Since these cards have no MPEG decoder onboard, they transmit
|
/linux-5.10/Documentation/sound/ |
D | alsa-configuration.rst | 16 If you want to support the WaveTable functionality on cards such as 22 too. "Debug detection" will add checks for the detection of cards. 25 (if the card supports ISA PnP). You don't need to configure the cards 125 Default: enabled, for PCI and ISA PnP cards 130 Module for AdLib FM cards. 135 This module supports multiple cards. It does not support autoprobe, so 136 the port must be specified. For actual AdLib FM cards it will be 0x388. 164 Module for sound cards based on Analog Devices AD1816A/AD1815 ISA chips. 169 This module supports multiple cards, autoprobe and PnP. 174 Module for sound cards based on AD1848/AD1847/CS4248 ISA chips. [all …]
|
/linux-5.10/Documentation/admin-guide/media/ |
D | bt8xx.rst | 4 How to get the bt8xx cards working 18 This class of cards has a bt878a as the PCI interface, and require the bttv driver 21 Please see :doc:`bttv-cardlist` for a complete list of Cards based on the 40 cards, you should also do:: 73 - Old TV cards without EEPROMs, sharing a common PCI subsystem ID; 74 - Old TwinHan DST cards or clones with or without CA slot and not 103 The autodetected values are determined by the cards' "response string". 110 Running multiple cards 131 When you have multiple cards, the order of the card ID should 133 that removing/inserting other PCI cards may change the detection [all …]
|
D | pci-cardlist.rst | 50 The current supported PCI/PCIe cards (not including staging drivers) are 60 bt878 DVB/ATSC Support for bt878 based TV cards 68 dm1105 SDMC DM1105 based PCI cards 70 dvb-ttpci AV7110 cards 71 earth-pt1 PT1 cards 72 earth-pt3 Earthsoft PT3 cards 75 hopper HOPPER based cards 79 mantis MANTIS based cards 84 pluto2 Pluto2 cards 87 smipcie SMI PCIe DVBSky cards [all …]
|
D | ci.rst | 58 Cards that fall in this category 61 At present the cards that fall in this category are the Twinhan and its 62 clones, these cards are available as VVMER, Tomato, Hercules, Orange and 68 The CI module support is largely dependent upon the firmware on the cards 69 Some cards do support almost all of the available CI modules. There is 71 working with these cards.
|
/linux-5.10/drivers/net/can/softing/ |
D | Kconfig | 6 Support for CAN cards from Softing Gmbh & some cards 8 Softing Gmbh CAN cards come with 1 or 2 physical buses. 9 Those cards typically use Dual Port RAM to communicate 11 and PCMCIA cards. This driver operates on a platform device, 20 tristate "Softing Gmbh CAN pcmcia cards" 24 Support for PCMCIA cards from Softing Gmbh & some cards
|
/linux-5.10/drivers/net/wireless/atmel/ |
D | Kconfig | 10 questions about these cards. If you say Y, you will be asked for 23 A driver 802.11b wireless cards based on the Atmel fast-vnet 26 Many cards based on this chipset do not have flash memory 34 tristate "Atmel at76c506 PCI cards" 37 Enable support for PCI and mini-PCI cards containing the 41 tristate "Atmel at76c502/at76c504 PCMCIA cards" 47 Enable support for PCMCIA cards containing the 51 tristate "Atmel at76c503/at76c505/at76c505a USB cards"
|
/linux-5.10/drivers/net/wireless/cisco/ |
D | Kconfig | 10 questions about these cards. If you say Y, you will be asked for 16 tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards" 25 PCI 802.11 wireless cards. 26 It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X 37 tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards" 47 802.11 wireless cards. This driver is the same as the Aironet 49 It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X 53 802.11b cards.
|
/linux-5.10/Documentation/networking/device_drivers/appletalk/ |
D | cops.rst | 11 that there are 2 main types of cards and all other cards are 14 become more clear exactly what cards are supported. 16 Right now these cards are known to work with the COPS driver. The 17 LT-200 cards work in a somewhat more limited capacity than the 18 DL200 cards, which work very well and are in use by many people. 27 Other cards possibly supported mode unknown though: 41 To load multiple COPS driver Localtalk cards you can do one of the following:: 69 * For multiple cards, Ethernet and LocalTalk:: 74 * For multiple LocalTalk cards, and an Ethernet card.
|
/linux-5.10/drivers/net/ethernet/8390/ |
D | Kconfig | 15 the questions about National Semiconductor 8390 cards. If you say Y, 25 (PC-card) Fast Ethernet card to your computer. These cards are 77 If you have an Acorn system with one of these network cards, you 81 tristate "Macintosh NS 8390 based ethernet cards" 86 Ethernet cards using an NS8390 chipset or its equivalent, say Y. 108 Many Ethernet cards without a specific driver are compatible with 122 This driver is for NE2000 compatible PCI cards. It will not work 123 with ISA NE2000 cards (they have their own driver, "NE2000/NE1000 127 This driver also works for the following NE2000 clone cards: 162 Support for cards based on the National Semiconductor DP83902AV [all …]
|
/linux-5.10/drivers/staging/comedi/ |
D | Kconfig | 134 Enable support for Advantech PCL-726 and compatible ISA cards. 169 A-822PGH/PGL, A-823PGH/PGL, A-826PG and ICP DAS ISO-813 ISA cards 179 Enable support for Advantech PCL-814 and PCL-816 ISA cards 189 Enable support for Advantech PCL-818 ISA cards 199 Enable support for Advantech PCM-3724 PC/104 cards. 235 Enable support for Analog Devices RTI-800/815 ISA cards 243 Enable support for Analog Devices RTI-802 ISA cards 251 Enable support for Keithley Metrabyte DAC02 compatible ISA cards. 261 Enable support for Measurement Computing CIO-DAS16/M1 ISA cards. 271 and compatible ISA and PC/104 cards: [all …]
|
/linux-5.10/drivers/net/ethernet/dec/tulip/ |
D | Kconfig | 10 This selects the "Tulip" family of EISA/PCI network cards. 20 cards and also works with cards based on the DECchip 21 21040 (Tulip series) chips. Some LinkSys PCI cards are 24 cards, below. However, most people with a network card of this type 48 cards and also works with cards based on the DECchip 49 21140 (Tulip series) chips. Some LinkSys PCI cards are 52 cards, above. However, most people with a network card of this type 113 This is support for the DIGITAL series of PCI/EISA Ethernet cards. 138 This driver is for DM9102(A)/DM9132/DM9801 compatible PCI cards from
|
/linux-5.10/drivers/net/can/sja1000/ |
D | Kconfig | 14 CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche 21 This driver is for the one or two channel CPC-CARD cards from 35 tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards" 38 This driver is for the PCIcanx and PCIcan cards (1, 2 or 42 tristate "PEAK PCAN-PCI/PCIe/miniPCI Cards" 45 This driver is for the PCAN-PCI/PCIe/miniPCI cards 50 bool "PEAK PCAN-ExpressCard Cards" 71 tristate "PLX90xx PCI-bridge based Cards" 74 This driver is for CAN interface cards based on
|
/linux-5.10/arch/m68k/ |
D | Kconfig.bus | 25 expansion cards in your Amiga that conform to the Amiga 27 expansion cards that do not fit in the Zorro slots but fit in e.g. 36 600. If you intend to use pcmcia cards say Y; otherwise say N. 54 operate ISA cards on Atari. Only 8 bit cards are supported, and 57 driver for RTL8019AS based NE2000 compatible network cards.
|
/linux-5.10/Documentation/networking/device_drivers/ethernet/dec/ |
D | de4x5.rst | 4 DEC EtherWORKS Ethernet De4x5 cards 8 Corporation series of EtherWORKS Ethernet cards: 16 but it will now attempt to support all cards which conform to the 26 So far the driver is known to work with the following cards: 37 DE434, DE435 and DE500 cards and benchmarked with 'ttcp': it transferred 99 Should you have a need to restrict the driver to DIGITAL only cards, you 124 all cards running the dc2114x series chips in particular. Cards using 130 (quad 21041 MAC) cards also appear to work despite their incorrectly 133 I have added a temporary fix for interrupt problems when some SCSI cards 134 share the same interrupt as the DECchip based cards. The problem occurs [all …]
|
/linux-5.10/drivers/net/ethernet/mellanox/mlx5/core/ |
D | Kconfig | 17 Connect-IB cards by Mellanox Technologies. 27 Build support for the Innova family of network cards by Mellanox 28 Technologies. Innova network cards are comprised of a ConnectX chip 131 Build IPsec support for the Innova family of network cards by Mellanox 132 Technologies. Innova network cards are comprised of a ConnectX chip 145 Build IPsec support for the Connect-X family of network cards by Mellanox 172 Build TLS support for the Innova family of network cards by Mellanox 173 Technologies. Innova network cards are comprised of a ConnectX chip 188 Build TLS support for the Connect-X family of network cards by Mellanox
|
/linux-5.10/drivers/mmc/core/ |
D | quirks.h | 37 * Some MMC cards experience performance degradation with CMD23 40 * - Certain Toshiba cards. 42 * N.B. This doesn't affect SD cards. 56 * Some SD cards lockup while using CMD23 multiblock transfers. 64 * Some MMC cards need longer data read timeout than indicated in CSD. 107 * Certain Hynix eMMC 4.41 cards might get broken when HPI feature 108 * is used so disable the HPI feature for such buggy cards. 113 * Certain Micron (Numonyx) eMMC 4.5 cards might get broken when HPI 114 * feature is used so disable the HPI feature for such buggy cards.
|
/linux-5.10/drivers/media/pci/mantis/ |
D | Kconfig | 7 Support for PCI cards based on the Mantis and Hopper PCi bridge. 12 tristate "MANTIS based cards" 25 Support for PCI cards based on the Mantis PCI bridge. 31 tristate "HOPPER based cards" 36 Support for PCI cards based on the Hopper PCI bridge.
|
/linux-5.10/drivers/media/pci/cx88/ |
D | Kconfig | 12 TV cards. 23 Conexant 2388x based TV cards using ALSA. 38 This adds support for MPEG encoder cards based on the 46 tristate "DVB/ATSC Support for cx2388x based TV cards" 69 This adds support for DVB/ATSC cards based on the 80 This adds DVB-T support for cards based on the
|
/linux-5.10/drivers/net/wan/ |
D | Kconfig | 19 If you have one of those cards and wish to use it under Linux, 47 V.36 interface) to your Linux box. The cards can work as the 52 the firmware to the cards and to set them up. Look at the 55 details about the cards and the driver itself. 174 Driver for PCI200SYN cards by Goramo sp. j. 188 Driver for wanXL PCI cards by SBE Inc. 211 Alternative driver for PC300 RSV/X21 PCI cards made by 224 Driver for RISCom/N2 single or dual channel ISA cards by 230 Note that N2csu and N2dds cards are not supported by this driver. 241 Driver for C101 SuperSync ISA cards by Moxa Technologies Co., Ltd. [all …]
|
/linux-5.10/drivers/media/pci/saa7134/ |
D | Kconfig | 13 TV cards. 24 Philips SAA713x based TV cards using ALSA 39 tristate "DVB/ATSC Support for saa7134 based TV cards" 62 This adds support for DVB cards based on the 69 tristate "go7007 support for saa7134 based TV cards"
|
12345678910>>...54