Home
last modified time | relevance | path

Searched +full:bt656 +full:- +full:supply (Results 1 – 25 of 25) sorted by relevance

/linux-6.8/Documentation/devicetree/bindings/media/i2c/
Dtda1997x.txt1 Device-Tree bindings for the NXP TDA1997x HDMI receiver
6 - RGB 8bit per color (24 bits total): R[11:4] B[11:4] G[11:4]
7 - YUV444 8bit per color (24 bits total): Y[11:4] Cr[11:4] Cb[11:4]
8 - YUV422 semi-planar 8bit per component (16 bits total): Y[11:4] CbCr[11:4]
9 - YUV422 semi-planar 10bit per component (20 bits total): Y[11:2] CbCr[11:2]
10 - YUV422 semi-planar 12bit per component (24 bits total): - Y[11:0] CbCr[11:0]
11 - YUV422 BT656 8bit per component (8 bits total): YCbCr[11:4] (2-cycles)
12 - YUV422 BT656 10bit per component (10 bits total): YCbCr[11:2] (2-cycles)
13 - YUV422 BT656 12bit per component (12 bits total): YCbCr[11:0] (2-cycles)
16 - RGB 12bit per color (36 bits total): R[11:0] B[11:0] G[11:0]
[all …]
/linux-6.8/Documentation/devicetree/bindings/power/
Drockchip-io-domain.yaml1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/power/rockchip-io-domain.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Heiko Stuebner <heiko@sntech.de>
42 to report their voltage. The IO Voltage Domain for any non-specified
48 - rockchip,px30-io-voltage-domain
49 - rockchip,px30-pmu-io-voltage-domain
50 - rockchip,rk3188-io-voltage-domain
51 - rockchip,rk3228-io-voltage-domain
[all …]
/linux-6.8/arch/arm64/boot/dts/rockchip/
Drk3399pro-vmarc-som.dtsi1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/pinctrl/rockchip.h>
10 #include <dt-bindings/pwm/pwm.h>
13 compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro";
21 vcc3v3_pcie: vcc-pcie-regulator {
22 compatible = "regulator-fixed";
23 enable-active-high;
25 pinctrl-names = "default";
26 pinctrl-0 = <&pcie_pwr>;
[all …]
Drk3399-puma.dtsi1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 #include <dt-bindings/pwm/pwm.h>
8 #include "rk3399-opp.dtsi"
17 compatible = "gpio-leds";
18 pinctrl-names = "default";
19 pinctrl-0 = <&module_led_pin>;
21 module_led: led-0 {
24 linux,default-trigger = "heartbeat";
25 panic-indicator;
29 extcon_usb3: extcon-usb3 {
[all …]
Drk3399-sapphire.dtsi1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 #include "dt-bindings/pwm/pwm.h"
7 #include "dt-bindings/input/input.h"
9 #include "rk3399-opp.dtsi"
12 compatible = "rockchip,rk3399-sapphire", "rockchip,rk3399";
21 stdout-path = "serial2:1500000n8";
24 clkin_gmac: external-gmac-clock {
25 compatible = "fixed-clock";
26 clock-frequency = <125000000>;
27 clock-output-names = "clkin_gmac";
[all …]
Drk3399-kobol-helios64.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
13 /dts-v1/;
15 #include "rk3399-opp.dtsi"
30 avdd_0v9_s0: avdd-0v9-s0 {
31 compatible = "regulator-fixed";
32 regulator-name = "avdd_0v9_s0";
33 regulator-always-on;
34 regulator-boot-on;
35 regulator-min-microvolt = <900000>;
36 regulator-max-microvolt = <900000>;
[all …]
Drk3399-rock960.dtsi1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
9 #include "rk3399-opp.dtsi"
10 #include <dt-bindings/interrupt-controller/irq.h>
19 sdio_pwrseq: sdio-pwrseq {
20 compatible = "mmc-pwrseq-simple";
22 clock-names = "ext_clock";
23 pinctrl-names = "default";
24 pinctrl-0 = <&wifi_enable_h>;
25 reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
28 vcc12v_dcin: vcc12v-dcin {
[all …]
Drk3399-leez-p710.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
7 #include <dt-bindings/input/linux-event-codes.h>
8 #include <dt-bindings/interrupt-controller/irq.h>
9 #include <dt-bindings/pwm/pwm.h>
11 #include "rk3399-opp.dtsi"
25 stdout-path = "serial2:1500000n8";
28 clkin_gmac: external-gmac-clock {
29 compatible = "fixed-clock";
30 clock-frequency = <125000000>;
[all …]
Drk3399-pinephone-pro.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
9 * https://files.pine64.org/doc/PinePhonePro/PinephonePro-Schematic-V1.0-20211127.pdf
12 /dts-v1/;
13 #include <dt-bindings/input/gpio-keys.h>
14 #include <dt-bindings/input/linux-event-codes.h>
16 #include "rk3399-opp.dtsi"
20 compatible = "pine64,pinephone-pro", "rockchip,rk3399";
21 chassis-type = "handset";
30 stdout-path = "serial2:115200n8";
33 adc-keys {
[all …]
Drk3399-nanopi4.dtsi1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 * RK3399-based FriendlyElec boards device tree source
14 /dts-v1/;
15 #include <dt-bindings/input/linux-event-codes.h>
17 #include "rk3399-opp.dtsi"
28 stdout-path = "serial2:1500000n8";
31 clkin_gmac: external-gmac-clock {
32 compatible = "fixed-clock";
33 clock-frequency = <125000000>;
34 clock-output-names = "clkin_gmac";
[all …]
Drk3399-rock-4c-plus.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
8 /dts-v1/;
9 #include <dt-bindings/leds/common.h>
11 #include "rk3399-t-opp.dtsi"
15 compatible = "radxa,rock-4c-plus", "rockchip,rk3399";
24 stdout-path = "serial2:1500000n8";
27 clkin_gmac: external-gmac-clock {
28 compatible = "fixed-clock";
29 clock-frequency = <125000000>;
30 clock-output-names = "clkin_gmac";
[all …]
Drk3399-rock-pi-4.dtsi1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
7 /dts-v1/;
8 #include <dt-bindings/input/linux-event-codes.h>
9 #include <dt-bindings/leds/common.h>
10 #include <dt-bindings/pwm/pwm.h>
21 stdout-path = "serial2:1500000n8";
24 clkin_gmac: external-gmac-clock {
25 compatible = "fixed-clock";
26 clock-frequency = <125000000>;
27 clock-output-names = "clkin_gmac";
[all …]
Drk3399-hugsun-x99.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /dts-v1/;
3 #include <dt-bindings/pwm/pwm.h>
4 #include <dt-bindings/input/input.h>
5 #include <dt-bindings/interrupt-controller/irq.h>
7 #include "rk3399-opp.dtsi"
21 stdout-path = "serial2:1500000n8";
24 clkin_gmac: external-gmac-clock {
25 compatible = "fixed-clock";
26 clock-frequency = <125000000>;
[all …]
Drk3399-orangepi.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
8 #include "dt-bindings/pwm/pwm.h"
9 #include "dt-bindings/input/input.h"
10 #include <dt-bindings/interrupt-controller/irq.h>
11 #include "dt-bindings/usb/pd.h"
13 #include "rk3399-opp.dtsi"
17 compatible = "rockchip,rk3399-orangepi", "rockchip,rk3399";
27 stdout-path = "serial2:1500000n8";
30 clkin_gmac: external-gmac-clock {
[all …]
Drk3399-roc-pc.dtsi1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
6 /dts-v1/;
7 #include <dt-bindings/input/linux-event-codes.h>
8 #include <dt-bindings/pwm/pwm.h>
10 #include "rk3399-opp.dtsi"
13 model = "Firefly ROC-RK3399-PC Board";
14 compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
23 stdout-path = "serial2:1500000n8";
27 compatible = "pwm-backlight";
[all …]
Drk3399-khadas-edge.dtsi1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
7 /dts-v1/;
8 #include <dt-bindings/input/linux-event-codes.h>
9 #include <dt-bindings/interrupt-controller/irq.h>
10 #include <dt-bindings/pwm/pwm.h>
12 #include "rk3399-opp.dtsi"
22 stdout-path = "serial2:1500000n8";
25 clkin_gmac: external-gmac-clock {
26 compatible = "fixed-clock";
27 clock-frequency = <125000000>;
[all …]
Drk3399-gru-scarlet.dtsi1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 * Google Gru-scarlet board device tree source
8 #include "rk3399-gru.dtsi"
11 chassis-type = "tablet";
16 pp1250_s3: pp1250-s3 {
17 compatible = "regulator-fixed";
18 regulator-name = "pp1250_s3";
21 regulator-always-on;
22 regulator-boot-on;
23 regulator-min-microvolt = <1250000>;
[all …]
Drk3399-rockpro64.dtsi1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
7 #include <dt-bindings/input/linux-event-codes.h>
8 #include <dt-bindings/pwm/pwm.h>
10 #include "rk3399-opp.dtsi"
21 stdout-path = "serial2:1500000n8";
26 compatible = "pwm-backlight";
27 brightness-levels = <0 4 8 16 32 64 128 255>;
28 default-brightness-level = <5>;
33 clkin_gmac: external-gmac-clock {
34 compatible = "fixed-clock";
[all …]
Drk3399-firefly.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
7 #include <dt-bindings/input/linux-event-codes.h>
8 #include <dt-bindings/interrupt-controller/irq.h>
9 #include <dt-bindings/pwm/pwm.h>
10 #include <dt-bindings/usb/pd.h>
12 #include "rk3399-opp.dtsi"
15 model = "Firefly-RK3399 Board";
16 compatible = "firefly,firefly-rk3399", "rockchip,rk3399";
26 stdout-path = "serial2:1500000n8";
[all …]
Drk3399-eaidk-610.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
7 #include <dt-bindings/input/linux-event-codes.h>
8 #include <dt-bindings/pwm/pwm.h>
9 #include <dt-bindings/usb/pd.h>
11 #include "rk3399-opp.dtsi"
14 model = "OPEN AI LAB EAIDK-610";
15 compatible = "openailab,eaidk-610", "rockchip,rk3399";
25 compatible = "pwm-backlight";
27 brightness-levels = <
[all …]
Drk3399-gru.dtsi1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
5 * Copyright 2016-2017 Google, Inc
8 #include <dt-bindings/input/input.h>
10 #include "rk3399-op1-opp.dtsi"
19 stdout-path = "serial2:115200n8";
28 * - Rails that only connect to the EC (or devices that the EC talks to)
30 * - Rails _are_ included if the rails go to the AP even if the AP
39 * - The EC controls the enable and the EC always enables a rail as
41 * - The rails are actually connected to each other by a jumper and
46 ppvar_sys: ppvar-sys {
[all …]
/linux-6.8/drivers/soc/rockchip/
Dio-domain.c1 // SPDX-License-Identifier: GPL-2.0-only
26 * - If the voltage on a rail is above the "1.8" voltage (1.98V) we'll tell the
28 * - If the voltage on a rail is above the "3.3" voltage (3.6V) we'll consider
71 int (*write)(struct rockchip_iodomain_supply *supply, int uV);
79 int (*write)(struct rockchip_iodomain_supply *supply, int uV);
82 static int rk3568_iodomain_write(struct rockchip_iodomain_supply *supply, int uV) in rk3568_iodomain_write() argument
84 struct rockchip_iodomain *iod = supply->iod; in rk3568_iodomain_write()
89 switch (supply->idx) { in rk3568_iodomain_write()
93 b = supply->idx; in rk3568_iodomain_write()
95 b = supply->idx + 4; in rk3568_iodomain_write()
[all …]
/linux-6.8/arch/arm/boot/dts/nxp/imx/
Dimx6qdl-apalis.dtsi1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
3 * Copyright 2014-2022 Toradex
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/pwm/pwm.h>
19 /delete-property/ mmc3;
29 compatible = "pwm-backlight";
30 brightness-levels = <0 45 63 88 119 158 203 255>;
31 default-brightness-level = <4>;
32 enable-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
33 pinctrl-names = "default";
[all …]
/linux-6.8/drivers/media/i2c/
Dov5640.c1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * Copyright (C) 2011-2013 Freescale Semiconductor, Inc. All Rights Reserved.
4 * Copyright (C) 2014-2017 Mentor Graphics Inc.
8 #include <linux/clk-provider.h>
22 #include <media/v4l2-async.h>
23 #include <media/v4l2-ctrls.h>
24 #include <media/v4l2-device.h>
25 #include <media/v4l2-event.h>
26 #include <media/v4l2-fwnode.h>
27 #include <media/v4l2-subdev.h>
[all …]
Dtda1997x.c1 // SPDX-License-Identifier: GPL-2.0
16 #include <linux/v4l2-dv-timings.h>
19 #include <media/v4l2-ctrls.h>
20 #include <media/v4l2-device.h>
21 #include <media/v4l2-dv-timings.h>
22 #include <media/v4l2-event.h>
23 #include <media/v4l2-fwnode.h>
31 #include <dt-bindings/media/tda1997x.h>
40 MODULE_PARM_DESC(debug, "debug level (0-2)");
46 "OBA", /* One-Bit Audio */
[all …]