| /linux-5.10/Documentation/devicetree/bindings/net/ |
| D | qca,ar803x.yaml | 39 vddio-supply:
44 either connect this to the vddio-regulator (1.5V / 1.8V) or the
49 vddio-regulator:
52 Initial data for the VDDIO regulator. Set this to 1.5V or 1.8V.
59 regulator to VDDIO.
80 vddio-supply = <&vddio>;
82 vddio: vddio-regulator {
103 vddio-supply = <&vddh>;
|
| /linux-5.10/drivers/pinctrl/ |
| D | pinctrl-u300.c | 220 PINCTRL_PIN(31, "P PAD VDDIO 11"),
239 PINCTRL_PIN(50, "P PAD VDDIO 16"),
253 PINCTRL_PIN(64, "P PAD VDDIO 18"),
270 PINCTRL_PIN(81, "P PAD VDDIO 13"),
284 PINCTRL_PIN(95, "P PAD VDDIO 8"),
293 PINCTRL_PIN(104, "P PAD VDDIO 14"),
305 PINCTRL_PIN(115, "P PAD VDDIO 15"),
323 PINCTRL_PIN(133, "P PAD VDDIO 19"),
335 PINCTRL_PIN(145, "P PAD VDDIO 22"),
349 PINCTRL_PIN(159, "P PAD VDDIO 21"),
[all …]
|
| /linux-5.10/Documentation/devicetree/bindings/sound/ |
| D | sgtl5000.yaml | 33 VDDIO-supply:
34 description: the regulator provider of VDDIO
59 VDDIO 1.8V 2.5V 3.3V
72 VDDIO 1.8V 2.5V 3.3V
86 - VDDIO-supply
104 VDDIO-supply = <®_3p3v>;
|
| D | da7218.txt | 13 - VDDIO-supply: VDDIO power supply for the device
79 VDDIO-supply = <®_audio>;
|
| /linux-5.10/Documentation/devicetree/bindings/iio/imu/ |
| D | invensense,icm42600.yaml | 47 vddio-supply:
75 vddio-supply = <&vddio>;
94 vddio-supply = <&vddio>;
|
| /linux-5.10/Documentation/devicetree/bindings/display/panel/ |
| D | asus,z00t-tm5p5-nt35596.yaml | 28 vddio-supply:
29 description: vddio supply
35 - vddio-supply
53 vddio-supply = <&pm8916_l6>;
|
| /linux-5.10/arch/arm64/boot/dts/freescale/ |
| D | fsl-ls1028a-kontron-sl28-var4.dts | 38 vddio-supply = <&vddh>;
40 vddio: vddio-regulator { label
41 regulator-name = "VDDIO";
|
| /linux-5.10/Documentation/devicetree/bindings/iio/accel/ |
| D | bosch,bma400.yaml | 29 vddio-supply:
52 vddio-supply = <&vddio>;
|
| D | mma8452.txt | 25 - vddio-supply: phandle to the regulator that provides vddio power to the accelerometer.
|
| D | bma180.txt | 18 - vddio-supply : regulator phandle connected to the VDDIO pin
|
| /linux-5.10/Documentation/devicetree/bindings/media/ |
| D | samsung-s5c73m3.txt | 20 - vddio-host-supply : host I/O power supply (1.8V to 2.8V);
21 - vddio-cis-supply : CIS I/O power supply (1.2V to 1.8V);
73 vddio-host-supply = <&ldo18_reg>;
74 vddio-cis-supply = <&ldo9_reg>;
|
| /linux-5.10/drivers/gpu/drm/msm/dsi/ |
| D | dsi_cfg.c | 19 {"vddio", 100000, 100}, /* 1.8 V */
40 {"vddio", 100000, 100}, /* 1.8 V */
60 {"vddio", 100000, 100}, /* 1.8 V */
80 {"vddio", 100000, 100}, /* 1.8 V */
96 {"vddio", 100000, 100}, /* 1.8 V */
124 {"vddio", 100000, 100 },/* 1.8 V */
|
| /linux-5.10/arch/arm/boot/dts/ |
| D | ste-href-tvk1281618-r2.dtsi | 18 vddio-supply = <&db8500_vsmps2_reg>;
38 vddio-supply = <&db8500_vsmps2_reg>;
57 vddio-supply = <&db8500_vsmps2_reg>;
|
| D | imx23-sansa.dts | 133 reg_vddio_sd0: regulator-vddio-sd0 {
135 regulator-name = "vddio-sd0";
141 reg_vddio_sd1: regulator-vddio-sd1 {
143 regulator-name = "vddio-sd1";
|
| D | ste-href-tvk1281618-r3.dtsi | 24 vddio-supply = <&db8500_vsmps2_reg>;
39 vddio-supply = <&db8500_vsmps2_reg>;
|
| /linux-5.10/Documentation/devicetree/bindings/display/bridge/ |
| D | toshiba,tc358768.yaml | 35 vddio-supply:
112 - vddio-supply
136 vddio-supply = <&v3_3d>;
|
| D | toshiba,tc358775.yaml | 34 vddio-supply:
83 - vddio-supply
109 vddio-supply = <&pm8916_l6>;
168 vddio-supply = <&pm8916_l6>;
|
| D | toshiba,tc358764.txt | 7 - vddio-supply: I/O voltage supply, 1.8V or 3.3V
24 vddio-supply = <&vcc_1v8_reg>;
|
| /linux-5.10/arch/arm64/boot/dts/nvidia/ |
| D | tegra194-p2972-0000.dts | 176 vddio-pex-ctl-supply = <&vdd_1v8ao>;
185 vddio-pex-ctl-supply = <&vdd_1v8ao>;
194 vddio-pex-ctl-supply = <&vdd_1v8ao>;
204 vddio-pex-ctl-supply = <&vdd_1v8ao>;
219 vddio-pex-ctl-supply = <&vdd_1v8ao>;
|
| /linux-5.10/Documentation/devicetree/bindings/display/msm/ |
| D | dsi.txt | 29 - vddio-supply: phandle to vdd-io regulator device node
115 - vddio-supply: phandle to vdd-io regulator device node
117 - vddio-supply: phandle to vdd-io regulator device node
182 vddio-supply = <&pma8084_l12>;
246 vddio-supply = <&pma8084_l12>;
|
| /linux-5.10/drivers/net/phy/ |
| D | at803x.c | 153 struct regulator *vddio; member
358 .name = "vddio",
359 .of_match = of_match_ptr("vddio-regulator"),
391 phydev_err(phydev, "failed to register VDDIO regulator\n"); in at8031_register_regulators()
492 priv->vddio = devm_regulator_get_optional(&phydev->mdio.dev, in at803x_parse_dt()
493 "vddio"); in at803x_parse_dt()
494 if (IS_ERR(priv->vddio)) { in at803x_parse_dt()
495 phydev_err(phydev, "failed to get VDDIO regulator\n"); in at803x_parse_dt()
496 return PTR_ERR(priv->vddio); in at803x_parse_dt()
499 ret = regulator_enable(priv->vddio); in at803x_parse_dt()
[all …]
|
| /linux-5.10/sound/soc/codecs/ |
| D | sgtl5000.c | 97 VDDIO, enumerator
105 "VDDIO",
1282 * according to voltage of vdda and vddio
1283 * 3. line out VAG, normally set to vddio/2
1287 * 2. vdda and vddio voltage value. > 3.1v or not
1293 int vddio; in sgtl5000_set_power_regs() local
1304 vddio = regulator_get_voltage(sgtl5000->supplies[VDDIO].consumer); in sgtl5000_set_power_regs()
1310 vddio = vddio / 1000; in sgtl5000_set_power_regs()
1313 if (vdda <= 0 || vddio <= 0 || vddd < 0) { in sgtl5000_set_power_regs()
1320 if (vdda > 3600 || vddio > 3600 || vddd > 1980) { in sgtl5000_set_power_regs()
[all …]
|
| /linux-5.10/Documentation/devicetree/bindings/iio/gyroscope/ |
| D | nxp,fxas21002c.txt | 10 - vddio-supply: phandle to the regulator that provides power to the bus.
30 vddio-supply = <®_peri_3p15v>;
|
| /linux-5.10/Documentation/devicetree/bindings/input/touchscreen/ |
| D | silead_gsl1680.txt | 26 - vddio-supply : regulator phandle for controller VDDIO
|
| /linux-5.10/drivers/gpu/drm/bridge/ |
| D | tc358775.c | 269 struct regulator *vddio; member
287 ret = regulator_enable(tc->vddio); in tc_bridge_pre_enable()
289 dev_err(dev, "regulator vddio enable failed, %d\n", ret); in tc_bridge_pre_enable()
321 ret = regulator_disable(tc->vddio); in tc_bridge_post_disable()
323 dev_err(dev, "regulator vddio disable failed, %d\n", ret); in tc_bridge_post_disable()
678 tc->vddio = devm_regulator_get(dev, "vddio-supply"); in tc_probe()
679 if (IS_ERR(tc->vddio)) { in tc_probe()
680 ret = PTR_ERR(tc->vddio); in tc_probe()
681 dev_err(dev, "vddio-supply not found\n"); in tc_probe()
|