| /linux-5.10/Documentation/devicetree/bindings/power/reset/ |
| D | gpio-poweroff.txt | 12 triggering positive edge triggered power off. After a delay of 100ms,
14 triggering negative edge triggered power off. After another 100ms
16 the CPU still running after a 3000ms delay, a WARN_ON(1) is emitted.
30 - active-delay-ms: Delay (default 100) to wait after driving gpio active
31 - inactive-delay-ms: Delay (default 100) to wait after driving gpio inactive
32 - timeout-ms: Time to wait before asserting a WARN_ON(1). If nothing is
33 specified, 3000 ms is used.
40 timeout-ms = <3000>;
|
| D | gpio-restart.txt | 40 - active-delay: Delay (default 100) to wait after driving gpio active [ms]
41 - inactive-delay: Delay (default 100) to wait after driving gpio inactive [ms]
42 - wait-delay: Delay (default 3000) to wait after completing restart
43 sequence [ms]
53 wait-delay = <3000>;
|
| /linux-5.10/Documentation/devicetree/bindings/serial/ |
| D | pl011.yaml | 87 poll-rate-ms:
90 default 100ms.
94 poll-timeout-ms:
97 3000ms.
99 default: 3000
107 poll-rate-ms: [ auto-poll ]
108 poll-timeout-ms: [ auto-poll ]
|
| /linux-5.10/Documentation/devicetree/bindings/mfd/ |
| D | rohm,bd71847-pmic.yaml | 65 # Shortest being 10ms, next 500ms and then multiple of 500ms up to 7,5s
67 # Shortest being 10ms, next 1000ms and then multiple of 1000ms up to 15s
71 rohm,short-press-ms:
81 - 3000
92 rohm,long-press-ms:
99 - 3000
146 rohm,short-press-ms = <10>;
147 rohm,long-press-ms = <2000>;
|
| D | rohm,bd71837-pmic.yaml | 59 # Shortest being 10ms, next 500ms and then multiple of 500ms up to 7,5s
61 # Shortest being 10ms, next 1000ms and then multiple of 1000ms up to 15s
65 rohm,short-press-ms:
75 - 3000
85 rohm,long-press-ms:
92 - 3000
136 rohm,short-press-ms = <10>;
137 rohm,long-press-ms = <2000>;
|
| /linux-5.10/Documentation/devicetree/bindings/input/ |
| D | input-reset.txt | 18 timeout-ms: duration keys must be pressed together in milliseconds before
29 timeout-ms = <3000>;
|
| /linux-5.10/net/hsr/ |
| D | hsr_main.h | 21 #define HSR_LIFE_CHECK_INTERVAL 2000 /* ms */
22 #define HSR_NODE_FORGET_TIME 60000 /* ms */
23 #define HSR_ANNOUNCE_INTERVAL 100 /* ms */
28 #define MAX_SLAVE_DIFF 3000 /* ms */
35 #define PRUNE_PERIOD 3000 /* ms */
|
| /linux-5.10/drivers/power/reset/ |
| D | gpio-poweroff.c | 18 #define DEFAULT_TIMEOUT_MS 3000
68 device_property_read_u32(&pdev->dev, "active-delay-ms", &active_delay); in gpio_poweroff_probe()
69 device_property_read_u32(&pdev->dev, "inactive-delay-ms", in gpio_poweroff_probe()
71 device_property_read_u32(&pdev->dev, "timeout-ms", &timeout); in gpio_poweroff_probe()
|
| /linux-5.10/Documentation/devicetree/bindings/sound/ |
| D | cs35l33.txt | 31 20ms. If this property is set to 0,1,2,3 then ramp times would be 40ms,
32 60ms,100ms,175ms respectively for 48KHz sample rate.
72 from 0 to 7 for delays of 5ms, 10ms, 50ms, 100ms, 200ms, 500ms, 1000ms.
73 The default is 100ms.
80 The reference voltage starts at 3000mV with a value of 0x3 and is increased
|
| /linux-5.10/drivers/leds/ |
| D | leds-lp5523.c | 133 /* Chip startup time is 500 us, 1 - 2 ms gives some margin */ in lp5523_post_init_device()
306 /* Let the programs run for couple of ms and check the engine status */ in lp5523_init_program_engine()
307 usleep_range(3000, 6000); in lp5523_init_program_engine()
601 usleep_range(3000, 6000); /* ADC conversion time is typically 2.7 ms */ in lp5523_selftest()
607 usleep_range(3000, 6000); /* Was not ready. Wait little bit */ in lp5523_selftest()
625 /* let current stabilize 2 - 4ms before measurements start */ in lp5523_selftest()
629 /* ADC conversion time is 2.7 ms typically */ in lp5523_selftest()
630 usleep_range(3000, 6000); in lp5523_selftest()
636 usleep_range(3000, 6000);/* Was not ready. Wait. */ in lp5523_selftest()
|
| /linux-5.10/sound/xen/ |
| D | xen_snd_front_evtchnl.h | 27 /* Timeout in ms to wait for backend to respond. */
28 #define VSND_WAIT_BACK_MS 3000
|
| /linux-5.10/drivers/gpu/drm/amd/display/modules/hdcp/ |
| D | hdcp2_transition.c | 215 set_watchdog_in_ms(hdcp, 3000, output); in mod_hdcp_hdcp2_transition()
220 * 200 ms, so delay 210 ms instead of 200 ms in mod_hdcp_hdcp2_transition()
269 * measurement is slightly greater than 3000 ms. in mod_hdcp_hdcp2_transition()
270 * Delay 100 ms to ensure it is fully timeout in mod_hdcp_hdcp2_transition()
524 set_watchdog_in_ms(hdcp, 3000, output); in mod_hdcp_hdcp2_dp_transition()
|
| /linux-5.10/tools/perf/tests/ |
| D | hists_cumulate.c | 153 #define DSO(he) (he->ms.map->dso->short_name)
154 #define SYM(he) (he->ms.sym->name)
158 #define CDSO(cl) (cl->ms.map->dso->short_name)
159 #define CSYM(cl) (cl->ms.sym->name)
474 { 3000, 1000, "bash", "bash", "main" }, in test3()
475 { 3000, 1000, "perf", "perf", "cmd_record" }, in test3()
594 { 3000, 1000, "bash", "bash", "main" }, in test4()
595 { 3000, 1000, "perf", "perf", "cmd_record" }, in test4()
|
| /linux-5.10/drivers/scsi/bnx2fc/ |
| D | bnx2fc_constants.h | 75 /* E_D_TOV timer resolution in ms */
82 /* REC timer resolution in ms */
88 /* E_D_TOV timer default wraparound value (2 sec) in 20 ms resolution */
92 /* REC_TOV timer default wraparound value (3 sec) in 20 ms resolution */
94 (3000 / FCOE_REC_TIMER_RESOLUTION_MS)
|
| /linux-5.10/sound/soc/codecs/ |
| D | max98373.c | 99 0, 1, TLV_DB_SCALE_ITEM(-3000, 500, 0),
133 "45ms", "225ms", "450ms", "1150ms",
134 "2250ms", "3100ms", "4500ms", "6750ms"
143 "160us", "320us", "640us", "1.28ms",
144 "2.56ms", "5.12ms", "10.24ms", "20.48ms",
145 "40.96ms", "81.92ms", "16.384ms", "32.768ms"
154 "640us", "1.28ms", "2.56ms", "5.120ms",
155 "10.24ms", "20.48ms", "40.96ms", "81.92ms",
156 "163.84ms", "327.68ms", "655.36ms", "1310.72ms"
|
| D | max9860.c | 131 MAX9860_PAM_MAX, MAX9860_PAM_MAX, TLV_DB_SCALE_ITEM(3000, 0, 0));
137 "AGC Disabled", "50ms", "100ms", "400ms"
151 "3ms", "12ms", "50ms", "200ms"
158 "78ms", "156ms", "312ms", "625ms",
|
| /linux-5.10/drivers/gpu/drm/xen/ |
| D | xen_drm_front.h | 80 /* timeout in ms to wait for backend to respond */
81 #define XEN_DRM_FRONT_WAIT_BACK_MS 3000
|
| /linux-5.10/drivers/media/dvb-frontends/ |
| D | horus3a.c | 173 u32 ms = 0; in horus3a_set_params() local
196 ms = DIV_ROUND_CLOSEST((frequency * mixdiv) / 2, 1000); in horus3a_set_params()
197 if (ms > 0x7FFF) { /* 15 bit */ in horus3a_set_params()
292 data[0] = (u8)((ms >> 7) & 0xFF); in horus3a_set_params()
293 data[1] = (u8)((ms << 1) & 0xFF); in horus3a_set_params()
309 priv->frequency = ms * 2 * 1000 / mixdiv; in horus3a_set_params()
353 /* wait 4ms after power on */ in horus3a_attach()
385 usleep_range(3000, 5000); in horus3a_attach()
|
| /linux-5.10/drivers/thunderbolt/ |
| D | nhi_ops.c | 18 #define ICL_LC_MAILBOX_TIMEOUT 500 /* ms */
70 usleep_range(3000, 3100); in icl_nhi_force_power()
|
| /linux-5.10/drivers/thermal/ |
| D | da9062-thermal.c | 38 #define DA9062_DEFAULT_POLLING_MS_PERIOD 3000
210 "Out-of-range polling period %d ms\n", in da9062_thermal_probe()
247 "TJUNC temperature polling period set at %d ms\n", in da9062_thermal_probe()
|
| /linux-5.10/drivers/net/ethernet/chelsio/cxgb3/ |
| D | aq100x.c | 71 int err = t3_phy_reset(phy, MDIO_MMD_VEND1, 3000); in aq100x_reset()
290 wait = 500; /* in 10ms increments */ in t3_aq100x_phy_prep()
315 if (wait > 3000) in t3_aq100x_phy_prep()
|
| /linux-5.10/drivers/iio/common/ssp_sensors/ |
| D | ssp.h | 23 #define SSP_SW_RESET_TIME 3000
24 /* Sensor polling in ms */
|
| /linux-5.10/net/batman-adv/ |
| D | main.h | 47 #define BATADV_TT_REQUEST_TIMEOUT 3000
117 #define BATADV_BLA_LOOPDETECT_TIMEOUT 3000 /* 3 seconds */
120 #define BATADV_DUPLIST_TIMEOUT 500 /* 500 ms */
|
| /linux-5.10/drivers/net/wireless/ath/ath9k/ |
| D | htc.h | 36 #define ATH_AP_SHORT_CALINTERVAL 100 /* 100 ms */
37 #define ATH_ANI_POLLINTERVAL 100 /* 100 ms */
286 #define ATH9K_HTC_TX_CLEANUP_INTERVAL 50 /* ms */
287 #define ATH9K_HTC_TX_TIMEOUT_INTERVAL 3000 /* ms */
|
| /linux-5.10/arch/powerpc/boot/dts/ |
| D | ac14xx.dts | 289 usb@3000 {
355 debounce-delay-ms = <5>;
359 col-switch-delay-ms = <200>;
|