Home
last modified time | relevance | path

Searched +full:24 +full:gbit (Results 1 – 25 of 30) sorted by relevance

12

/linux-6.8/Documentation/networking/device_drivers/ethernet/intel/
Diavf.rst126 # ip link add link eth0 eth0.24 type vlan proto 802.1ad id 24
127 # ip link add link eth0.24 eth0.24.371 type vlan proto 802.1Q id 371
129 Where "24" and "371" are example VLAN IDs.
159 to 1Gbit for tc0 and 3Gbit for tc1.
164 queues 16@0 16@16 hw 1 mode channel shaper bw_rlimit min_rate 1Gbit 2Gbit
165 max_rate 1Gbit 3Gbit
181 For example: min_rate 1Gbit 3Gbit: Verify bandwidth limit using network
Di40e.rst242 | 31 28 24 20 16 | 15 12 8 4 0 |
479 ip link add link eth0 eth0.24 type vlan proto 802.1ad id 24
480 ip link add link eth0.24 eth0.24.371 type vlan proto 802.1Q id 371
482 Where "24" and "371" are example VLAN IDs.
668 to 1Gbit for tc0 and 3Gbit for tc1.
673 queues 16@0 16@16 hw 1 mode channel shaper bw_rlimit min_rate 1Gbit 2Gbit
674 max_rate 1Gbit 3Gbit
690 For example: min_rate 1Gbit 3Gbit: Verify bandwidth limit using network
/linux-6.8/drivers/net/ethernet/aquantia/atlantic/hw_atl2/
Dhw_atl2.c643 u32 l = (ar_mac[i][2] << 24) | (ar_mac[i][3] << 16) | in hw_atl2_hw_multicast_list_set()
703 {0xfU, 0xffU}, /* 10Gbit */ in hw_atl2_hw_interrupt_moderation_set()
704 {0xfU, 0x1ffU}, /* 5Gbit */ in hw_atl2_hw_interrupt_moderation_set()
705 {0xfU, 0x1ffU}, /* 5Gbit 5GS */ in hw_atl2_hw_interrupt_moderation_set()
706 {0xfU, 0x1ffU}, /* 2.5Gbit */ in hw_atl2_hw_interrupt_moderation_set()
707 {0xfU, 0x1ffU}, /* 1Gbit */ in hw_atl2_hw_interrupt_moderation_set()
711 {0x6U, 0x38U},/* 10Gbit */ in hw_atl2_hw_interrupt_moderation_set()
712 {0xCU, 0x70U},/* 5Gbit */ in hw_atl2_hw_interrupt_moderation_set()
713 {0xCU, 0x70U},/* 5Gbit 5GS */ in hw_atl2_hw_interrupt_moderation_set()
714 {0x18U, 0xE0U},/* 2.5Gbit */ in hw_atl2_hw_interrupt_moderation_set()
[all …]
/linux-6.8/drivers/net/ethernet/aquantia/atlantic/hw_atl/
Dhw_atl_b0.c547 l = (mac_addr[2] << 24) | (mac_addr[3] << 16) | in hw_atl_b0_hw_mac_addr_set()
593 * Value 24 in 256byte units in hw_atl_b0_hw_init()
595 aq_hw_write_reg(self, HW_ATL_TX_DMA_TOTAL_REQ_LIMIT_ADR, 24); in hw_atl_b0_hw_init()
689 (buff->len_l2 << 24); in hw_atl_b0_hw_ring_tx_xmit()
1088 u32 l = (ar_mac[i][2] << 24) | (ar_mac[i][3] << 16) | in hw_atl_b0_hw_multicast_list_set()
1143 {0xfU, 0xffU}, /* 10Gbit */ in hw_atl_b0_hw_interrupt_moderation_set()
1144 {0xfU, 0x1ffU}, /* 5Gbit */ in hw_atl_b0_hw_interrupt_moderation_set()
1145 {0xfU, 0x1ffU}, /* 5Gbit 5GS */ in hw_atl_b0_hw_interrupt_moderation_set()
1146 {0xfU, 0x1ffU}, /* 2.5Gbit */ in hw_atl_b0_hw_interrupt_moderation_set()
1147 {0xfU, 0x1ffU}, /* 1Gbit */ in hw_atl_b0_hw_interrupt_moderation_set()
[all …]
Dhw_atl_a0.c337 l = (mac_addr[2] << 24) | (mac_addr[3] << 16) | in hw_atl_a0_hw_mac_addr_set()
462 (buff->len_l2 << 24) | in hw_atl_a0_hw_ring_tx_xmit()
795 u32 l = (ar_mac[i][2] << 24) | (ar_mac[i][3] << 16) | in hw_atl_a0_hw_multicast_list_set()
838 0x01CU, /* 10Gbit */ in hw_atl_a0_hw_interrupt_moderation_set()
839 0x039U, /* 5Gbit */ in hw_atl_a0_hw_interrupt_moderation_set()
840 0x039U, /* 5Gbit 5GS */ in hw_atl_a0_hw_interrupt_moderation_set()
841 0x073U, /* 2.5Gbit */ in hw_atl_a0_hw_interrupt_moderation_set()
842 0x120U, /* 1Gbit */ in hw_atl_a0_hw_interrupt_moderation_set()
/linux-6.8/drivers/net/ethernet/broadcom/
Dbgmac.c2 * Driver for (BCM4706)? GBit MAC core on BCMA bus.
775 tmp = (addr[0] << 24) | (addr[1] << 16) | (addr[2] << 8) | addr[3]; in bgmac_write_mac_address()
825 /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_speed */
905 /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipreset */
988 /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_reset in bgmac_chip_reset()
1044 /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_enable */
1098 /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipinit */
1629 MODULE_DESCRIPTION("Broadcom iProc GBit driver");
/linux-6.8/drivers/net/dsa/microchip/
Dksz9477.c663 data = ((addr[2] << 24) | (addr[3] << 16)); in ksz9477_fdb_add()
687 alu_table[3] = ((addr[2] << 24) | (addr[3] << 16)); in ksz9477_fdb_add()
719 data = ((addr[2] << 24) | (addr[3] << 16)); in ksz9477_fdb_del()
788 alu->mac[2] = (alu_table[3] >> 24) & 0xFF; in ksz9477_convert_alu()
863 mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16)); in ksz9477_mdb_add()
942 mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16)); in ksz9477_mdb_del()
1077 bool gbit; in ksz9477_get_interface() local
1082 gbit = ksz_get_gbit(dev, port); in ksz9477_get_interface()
1084 interface = ksz_get_xmii(dev, port, gbit); in ksz9477_get_interface()
Dksz_common.c225 * 3. 20 mA or 24 mA is often used for GMII/RGMII interface with using 2.5V
405 [STATIC_MAC_TABLE_FID] = GENMASK(30, 24),
413 [DYNAMIC_MAC_TABLE_SRC_PORT] = GENMASK(26, 24),
439 [STATIC_MAC_FID] = 24,
444 [DYNAMIC_MAC_SRC_PORT] = 24,
484 [DYNAMIC_MAC_TABLE_ENTRIES] = GENMASK(31, 24),
495 [DYNAMIC_MAC_ENTRIES] = 24,
2947 phy_interface_t ksz_get_xmii(struct ksz_device *dev, int port, bool gbit) in ksz_get_xmii() argument
2960 if (gbit) in ksz_get_xmii()
3013 bool gbit = false; in ksz_get_gbit() local
[all …]
/linux-6.8/drivers/hwmon/pmbus/
Dpmbus_core.c31 #define PMBUS_NAME_SIZE 24
1439 u16 gbit; /* generic status bit */ member
1506 bool upper = !!(attr->gbit & 0xff00); /* need to check STATUS_WORD */ in pmbus_add_sensor_attrs_one()
1531 if (!ret && attr->gbit && in pmbus_add_sensor_attrs_one()
1537 attr->gbit); in pmbus_add_sensor_attrs_one()
1737 .gbit = PB_STATUS_VIN_UV,
1762 .gbit = PB_STATUS_VOUT_OV,
1847 .gbit = PB_STATUS_INPUT,
1858 .gbit = PB_STATUS_IOUT_OC,
1938 .gbit = PB_STATUS_INPUT,
[all …]
/linux-6.8/Documentation/networking/
Ddccp.rst206 > ip route change 10.0.0.0/24 rto_min 250j dev wlan0
212 with very low RTTs (e.g., loopback, Gbit ethernet).
/linux-6.8/drivers/scsi/
Dscsi_transport_fc.c189 #define FC_VPORTSTATE_MAX_NAMELEN 24
252 { FC_PORTSPEED_1GBIT, "1 Gbit" },
253 { FC_PORTSPEED_2GBIT, "2 Gbit" },
254 { FC_PORTSPEED_4GBIT, "4 Gbit" },
255 { FC_PORTSPEED_10GBIT, "10 Gbit" },
256 { FC_PORTSPEED_8GBIT, "8 Gbit" },
257 { FC_PORTSPEED_16GBIT, "16 Gbit" },
258 { FC_PORTSPEED_32GBIT, "32 Gbit" },
259 { FC_PORTSPEED_20GBIT, "20 Gbit" },
260 { FC_PORTSPEED_40GBIT, "40 Gbit" },
[all …]
/linux-6.8/Documentation/admin-guide/nfs/
Dnfs-rdma.rst17 The NFS/RDMA client was first included in Linux 2.6.24. The NFS/RDMA server
20 In our testing, we have obtained excellent performance results (full 10Gbit
/linux-6.8/drivers/gpu/drm/ast/
Dast_post.c233 ast_moutdwm(ast, 0x1e6e0068, dlli | (dlli << 8) | (dlli << 16) | (dlli << 24)); in cbrdlli_ast2150()
250 ast_moutdwm(ast, 0x1e6e0068, dlli | (dlli << 8) | (dlli << 16) | (dlli << 24)); in cbrdlli_ast2150()
600 ast_moutdwm(ast, 0x1E6E0068, 0x00001400 | (dlli << 16) | (dlli << 24)); in finetuneDQI_L()
719 ast_moutdwm(ast, 0x1E6E0068, 0x00001300 | (dlli << 16) | (dlli << 24)); in finetuneDQSI()
792 ast_moutdwm(ast, 0x1E6E0068, 0x00001300 | (dlli << 16) | (dlli << 24)); in cbr_dll2()
1752 /* Check 8Gbit */ in check_dram_size_2500()
1755 reg_14 |= (tRFC >> 24) & 0xFF; in check_dram_size_2500()
1756 /* Check 4Gbit */ in check_dram_size_2500()
1760 /* Check 2Gbit */ in check_dram_size_2500()
1804 /* CLKIN = 24MHz */ in set_mpll_2500()
[all …]
/linux-6.8/drivers/net/ethernet/stmicro/stmmac/
Ddwmac-meson8b.c69 #define PRG_ETH0_ADJ_SKEW GENMASK(24, 20)
361 * a register) based on the line-speed (125MHz for Gbit speeds, in meson8b_init_prg_eth()
/linux-6.8/drivers/message/fusion/lsi/
Dmpi_cnfg.h236 * 06-24-05 01.05.09 Added EEDP defines to IOC Page 1.
306 * 05-24-07 01.05.15 Added Hide Physical Disks with Non-Integrated RAID
802 MPI_MANPAGE7_CONNECTOR_INFO ConnectorInfo[MPI_MANPAGE7_CONNECTOR_INFO_MAX]; /* 24h */
1169 U8 MetadataSize; /* 24h */
1228 #define MPI_BIOSPAGE1_IOCSET_SHIFT_INITIAL_SPINUP_DELAY (24)
1282 U32 Reserved10; /* 24h */
1305 U32 Reserved8; /* 24h */
1327 U32 Reserved7; /* 24h */
1350 U32 Reserved8; /* 24h */
1369 U32 Reserved6; /* 24h */
[all …]
/linux-6.8/drivers/platform/x86/
Dapple-gmux.c387 * eDP mux on retinas, the difference being support for 2.7 versus 5.4 Gbit/s.
849 ver_major = (version >> 24) & 0xff; in gmux_probe()
880 * 2^24 for compatibility with old gmux versions. Cap the max in gmux_probe()
/linux-6.8/drivers/net/ethernet/freescale/
Dfec.h416 /* Controller has GBIT support */
514 #define FEC_QUIRK_HAS_MDIO_C45 BIT(24)
Dgianfar.h85 #define FBTHR_SHIFT 24
112 * GBIT = 125MHz => 8ns/clock => 8*64 ns / tick
825 u8 gfar_mii_regs[24]; /* See gianfar_phy.h */
/linux-6.8/drivers/net/dsa/
Dvitesse-vsc73xx-core.c304 /* 22-24 are undefined */
334 /* 21-24 are undefined */
650 /* Take up the port in 1Gbit mode by default, this will be in vsc73xx_init_port()
/linux-6.8/include/rdma/
Dib_verbs.h849 * base rate of 2.5 Gbit/sec. For example, IB_RATE_5_GBPS will be
850 * converted to 2, since 5 Gbit/sec is 2 * 2.5 Gbit/sec.
907 * mult_to_ib_rate - Convert a multiple of 2.5 Gbit/sec to an IB rate
1226 IB_RNR_TIMER_040_96 = 24,
1261 IB_QP_RESERVED4 = (1<<24),
4800 * This function folded the multiplication results of two qpns, 24 bit each,
/linux-6.8/drivers/scsi/hisi_sas/
Dhisi_sas_v3_hw.c273 #define CHL_INT1_DMAC_RX_FIFO_ERR_OFF 24
386 #define CMD_HDR_SG_MOD_OFF 24
2833 if (intr_coal_ticks >= BIT(24)) { in intr_coal_ticks_v3_hw_store()
2834 dev_err(dev, "intr_coal_ticks must be less than 2^24!\n"); in intr_coal_ticks_v3_hw_store()
3902 { SAS_LINK_RATE_1_5_GBPS, "1.5 Gbit" },
3903 { SAS_LINK_RATE_3_0_GBPS, "3.0 Gbit" },
3904 { SAS_LINK_RATE_6_0_GBPS, "6.0 Gbit" },
3905 { SAS_LINK_RATE_12_0_GBPS, "12.0 Gbit" },
/linux-6.8/drivers/net/ethernet/aeroflex/
Dgreth.c1031 GRETH_REGSAVE(regs->esa_lsb, dev->dev_addr[2] << 24 | dev->dev_addr[3] << 16 | in greth_set_mac_add()
1406 /* Check if we have GBIT capable MAC */ in greth_of_probe()
1480 GRETH_REGSAVE(regs->esa_lsb, dev->dev_addr[2] << 24 | dev->dev_addr[3] << 16 | in greth_of_probe()
/linux-6.8/drivers/net/ethernet/pasemi/
Dpasemi_mac.c226 adr0 = dev->dev_addr[2] << 24 | in pasemi_mac_set_mac_addr()
1163 "Defaulting to 1Gbit full duplex\n"); in pasemi_mac_open()
/linux-6.8/drivers/net/ethernet/packetengines/
Dhamachi.c115 for these Gbit adapters or you get into an overrun condition really
989 hmp->timer.expires = RUN_AT((24*HZ)/10); /* 2.4 sec. */ in hamachi_open()
1528 if (pfck>>24 == 0x91 || pfck>>24 == 0x51) { in hamachi_rx()
/linux-6.8/drivers/net/ethernet/cortina/
Dgemini.c308 netdev_dbg(netdev, "connect %s to RGMII @ 1Gbit\n", in gmac_speed_set()
504 .rel_threshold = 24, in gmac_init()

12