1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * Processor capabilities determination functions.
4 *
5 * Copyright (C) xxxx the Anonymous
6 * Copyright (C) 1994 - 2006 Ralf Baechle
7 * Copyright (C) 2003, 2004 Maciej W. Rozycki
8 * Copyright (C) 2001, 2004, 2011, 2012 MIPS Technologies, Inc.
9 */
10 #include <linux/init.h>
11 #include <linux/kernel.h>
12 #include <linux/mmu_context.h>
13 #include <linux/ptrace.h>
14 #include <linux/smp.h>
15 #include <linux/stddef.h>
16 #include <linux/export.h>
17
18 #include <asm/bugs.h>
19 #include <asm/cpu.h>
20 #include <asm/cpu-features.h>
21 #include <asm/cpu-type.h>
22 #include <asm/fpu.h>
23 #include <asm/mipsregs.h>
24 #include <asm/mipsmtregs.h>
25 #include <asm/msa.h>
26 #include <asm/watch.h>
27 #include <asm/elf.h>
28 #include <asm/pgtable-bits.h>
29 #include <asm/spram.h>
30 #include <asm/traps.h>
31 #include <linux/uaccess.h>
32
33 #include "fpu-probe.h"
34
35 #include <asm/mach-loongson64/cpucfg-emul.h>
36
37 /* Hardware capabilities */
38 unsigned int elf_hwcap __read_mostly;
39 EXPORT_SYMBOL_GPL(elf_hwcap);
40
41 static bool mmid_disabled_quirk;
42
cpu_get_msa_id(void)43 static inline unsigned long cpu_get_msa_id(void)
44 {
45 unsigned long status, msa_id;
46
47 status = read_c0_status();
48 __enable_fpu(FPU_64BIT);
49 enable_msa();
50 msa_id = read_msa_ir();
51 disable_msa();
52 write_c0_status(status);
53 return msa_id;
54 }
55
56 static int mips_dsp_disabled;
57
dsp_disable(char * s)58 static int __init dsp_disable(char *s)
59 {
60 cpu_data[0].ases &= ~(MIPS_ASE_DSP | MIPS_ASE_DSP2P);
61 mips_dsp_disabled = 1;
62
63 return 1;
64 }
65
66 __setup("nodsp", dsp_disable);
67
68 static int mips_htw_disabled;
69
htw_disable(char * s)70 static int __init htw_disable(char *s)
71 {
72 mips_htw_disabled = 1;
73 cpu_data[0].options &= ~MIPS_CPU_HTW;
74 write_c0_pwctl(read_c0_pwctl() &
75 ~(1 << MIPS_PWCTL_PWEN_SHIFT));
76
77 return 1;
78 }
79
80 __setup("nohtw", htw_disable);
81
82 static int mips_ftlb_disabled;
83 static int mips_has_ftlb_configured;
84
85 enum ftlb_flags {
86 FTLB_EN = 1 << 0,
87 FTLB_SET_PROB = 1 << 1,
88 };
89
90 static int set_ftlb_enable(struct cpuinfo_mips *c, enum ftlb_flags flags);
91
ftlb_disable(char * s)92 static int __init ftlb_disable(char *s)
93 {
94 unsigned int config4, mmuextdef;
95
96 /*
97 * If the core hasn't done any FTLB configuration, there is nothing
98 * for us to do here.
99 */
100 if (!mips_has_ftlb_configured)
101 return 1;
102
103 /* Disable it in the boot cpu */
104 if (set_ftlb_enable(&cpu_data[0], 0)) {
105 pr_warn("Can't turn FTLB off\n");
106 return 1;
107 }
108
109 config4 = read_c0_config4();
110
111 /* Check that FTLB has been disabled */
112 mmuextdef = config4 & MIPS_CONF4_MMUEXTDEF;
113 /* MMUSIZEEXT == VTLB ON, FTLB OFF */
114 if (mmuextdef == MIPS_CONF4_MMUEXTDEF_FTLBSIZEEXT) {
115 /* This should never happen */
116 pr_warn("FTLB could not be disabled!\n");
117 return 1;
118 }
119
120 mips_ftlb_disabled = 1;
121 mips_has_ftlb_configured = 0;
122
123 /*
124 * noftlb is mainly used for debug purposes so print
125 * an informative message instead of using pr_debug()
126 */
127 pr_info("FTLB has been disabled\n");
128
129 /*
130 * Some of these bits are duplicated in the decode_config4.
131 * MIPS_CONF4_MMUEXTDEF_MMUSIZEEXT is the only possible case
132 * once FTLB has been disabled so undo what decode_config4 did.
133 */
134 cpu_data[0].tlbsize -= cpu_data[0].tlbsizeftlbways *
135 cpu_data[0].tlbsizeftlbsets;
136 cpu_data[0].tlbsizeftlbsets = 0;
137 cpu_data[0].tlbsizeftlbways = 0;
138
139 return 1;
140 }
141
142 __setup("noftlb", ftlb_disable);
143
144 /*
145 * Check if the CPU has per tc perf counters
146 */
cpu_set_mt_per_tc_perf(struct cpuinfo_mips * c)147 static inline void cpu_set_mt_per_tc_perf(struct cpuinfo_mips *c)
148 {
149 if (read_c0_config7() & MTI_CONF7_PTC)
150 c->options |= MIPS_CPU_MT_PER_TC_PERF_COUNTERS;
151 }
152
check_errata(void)153 static inline void check_errata(void)
154 {
155 struct cpuinfo_mips *c = ¤t_cpu_data;
156
157 switch (current_cpu_type()) {
158 case CPU_34K:
159 /*
160 * Erratum "RPS May Cause Incorrect Instruction Execution"
161 * This code only handles VPE0, any SMP/RTOS code
162 * making use of VPE1 will be responsible for that VPE.
163 */
164 if ((c->processor_id & PRID_REV_MASK) <= PRID_REV_34K_V1_0_2)
165 write_c0_config7(read_c0_config7() | MIPS_CONF7_RPS);
166 break;
167 default:
168 break;
169 }
170 }
171
check_bugs32(void)172 void __init check_bugs32(void)
173 {
174 check_errata();
175 }
176
177 /*
178 * Probe whether cpu has config register by trying to play with
179 * alternate cache bit and see whether it matters.
180 * It's used by cpu_probe to distinguish between R3000A and R3081.
181 */
cpu_has_confreg(void)182 static inline int cpu_has_confreg(void)
183 {
184 #ifdef CONFIG_CPU_R3000
185 unsigned long size1, size2;
186 unsigned long cfg = read_c0_conf();
187
188 size1 = r3k_cache_size(ST0_ISC);
189 write_c0_conf(cfg ^ R30XX_CONF_AC);
190 size2 = r3k_cache_size(ST0_ISC);
191 write_c0_conf(cfg);
192 return size1 != size2;
193 #else
194 return 0;
195 #endif
196 }
197
set_elf_platform(int cpu,const char * plat)198 static inline void set_elf_platform(int cpu, const char *plat)
199 {
200 if (cpu == 0)
201 __elf_platform = plat;
202 }
203
set_elf_base_platform(const char * plat)204 static inline void set_elf_base_platform(const char *plat)
205 {
206 if (__elf_base_platform == NULL) {
207 __elf_base_platform = plat;
208 }
209 }
210
cpu_probe_vmbits(struct cpuinfo_mips * c)211 static inline void cpu_probe_vmbits(struct cpuinfo_mips *c)
212 {
213 int vmbits = 31;
214
215 if (cpu_has_64bits) {
216 write_c0_entryhi_64(0x3fffffffffffe000ULL);
217 back_to_back_c0_hazard();
218 vmbits = fls64(read_c0_entryhi_64() & 0x3fffffffffffe000ULL);
219 }
220 c->vmbits = vmbits;
221 }
222
set_isa(struct cpuinfo_mips * c,unsigned int isa)223 static void set_isa(struct cpuinfo_mips *c, unsigned int isa)
224 {
225 switch (isa) {
226 case MIPS_CPU_ISA_M64R5:
227 c->isa_level |= MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5;
228 set_elf_base_platform("mips64r5");
229 fallthrough;
230 case MIPS_CPU_ISA_M64R2:
231 c->isa_level |= MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2;
232 set_elf_base_platform("mips64r2");
233 fallthrough;
234 case MIPS_CPU_ISA_M64R1:
235 c->isa_level |= MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1;
236 set_elf_base_platform("mips64");
237 fallthrough;
238 case MIPS_CPU_ISA_V:
239 c->isa_level |= MIPS_CPU_ISA_V;
240 set_elf_base_platform("mips5");
241 fallthrough;
242 case MIPS_CPU_ISA_IV:
243 c->isa_level |= MIPS_CPU_ISA_IV;
244 set_elf_base_platform("mips4");
245 fallthrough;
246 case MIPS_CPU_ISA_III:
247 c->isa_level |= MIPS_CPU_ISA_II | MIPS_CPU_ISA_III;
248 set_elf_base_platform("mips3");
249 break;
250
251 /* R6 incompatible with everything else */
252 case MIPS_CPU_ISA_M64R6:
253 c->isa_level |= MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6;
254 set_elf_base_platform("mips64r6");
255 fallthrough;
256 case MIPS_CPU_ISA_M32R6:
257 c->isa_level |= MIPS_CPU_ISA_M32R6;
258 set_elf_base_platform("mips32r6");
259 /* Break here so we don't add incompatible ISAs */
260 break;
261 case MIPS_CPU_ISA_M32R5:
262 c->isa_level |= MIPS_CPU_ISA_M32R5;
263 set_elf_base_platform("mips32r5");
264 fallthrough;
265 case MIPS_CPU_ISA_M32R2:
266 c->isa_level |= MIPS_CPU_ISA_M32R2;
267 set_elf_base_platform("mips32r2");
268 fallthrough;
269 case MIPS_CPU_ISA_M32R1:
270 c->isa_level |= MIPS_CPU_ISA_M32R1;
271 set_elf_base_platform("mips32");
272 fallthrough;
273 case MIPS_CPU_ISA_II:
274 c->isa_level |= MIPS_CPU_ISA_II;
275 set_elf_base_platform("mips2");
276 break;
277 }
278 }
279
280 static char unknown_isa[] = KERN_ERR \
281 "Unsupported ISA type, c0.config0: %d.";
282
calculate_ftlb_probability(struct cpuinfo_mips * c)283 static unsigned int calculate_ftlb_probability(struct cpuinfo_mips *c)
284 {
285
286 unsigned int probability = c->tlbsize / c->tlbsizevtlb;
287
288 /*
289 * 0 = All TLBWR instructions go to FTLB
290 * 1 = 15:1: For every 16 TBLWR instructions, 15 go to the
291 * FTLB and 1 goes to the VTLB.
292 * 2 = 7:1: As above with 7:1 ratio.
293 * 3 = 3:1: As above with 3:1 ratio.
294 *
295 * Use the linear midpoint as the probability threshold.
296 */
297 if (probability >= 12)
298 return 1;
299 else if (probability >= 6)
300 return 2;
301 else
302 /*
303 * So FTLB is less than 4 times bigger than VTLB.
304 * A 3:1 ratio can still be useful though.
305 */
306 return 3;
307 }
308
set_ftlb_enable(struct cpuinfo_mips * c,enum ftlb_flags flags)309 static int set_ftlb_enable(struct cpuinfo_mips *c, enum ftlb_flags flags)
310 {
311 unsigned int config;
312
313 /* It's implementation dependent how the FTLB can be enabled */
314 switch (c->cputype) {
315 case CPU_PROAPTIV:
316 case CPU_P5600:
317 case CPU_P6600:
318 /* proAptiv & related cores use Config6 to enable the FTLB */
319 config = read_c0_config6();
320
321 if (flags & FTLB_EN)
322 config |= MTI_CONF6_FTLBEN;
323 else
324 config &= ~MTI_CONF6_FTLBEN;
325
326 if (flags & FTLB_SET_PROB) {
327 config &= ~(3 << MTI_CONF6_FTLBP_SHIFT);
328 config |= calculate_ftlb_probability(c)
329 << MTI_CONF6_FTLBP_SHIFT;
330 }
331
332 write_c0_config6(config);
333 back_to_back_c0_hazard();
334 break;
335 case CPU_I6400:
336 case CPU_I6500:
337 /* There's no way to disable the FTLB */
338 if (!(flags & FTLB_EN))
339 return 1;
340 return 0;
341 case CPU_LOONGSON64:
342 /* Flush ITLB, DTLB, VTLB and FTLB */
343 write_c0_diag(LOONGSON_DIAG_ITLB | LOONGSON_DIAG_DTLB |
344 LOONGSON_DIAG_VTLB | LOONGSON_DIAG_FTLB);
345 /* Loongson-3 cores use Config6 to enable the FTLB */
346 config = read_c0_config6();
347 if (flags & FTLB_EN)
348 /* Enable FTLB */
349 write_c0_config6(config & ~LOONGSON_CONF6_FTLBDIS);
350 else
351 /* Disable FTLB */
352 write_c0_config6(config | LOONGSON_CONF6_FTLBDIS);
353 break;
354 default:
355 return 1;
356 }
357
358 return 0;
359 }
360
mm_config(struct cpuinfo_mips * c)361 static int mm_config(struct cpuinfo_mips *c)
362 {
363 unsigned int config0, update, mm;
364
365 config0 = read_c0_config();
366 mm = config0 & MIPS_CONF_MM;
367
368 /*
369 * It's implementation dependent what type of write-merge is supported
370 * and whether it can be enabled/disabled. If it is settable lets make
371 * the merging allowed by default. Some platforms might have
372 * write-through caching unsupported. In this case just ignore the
373 * CP0.Config.MM bit field value.
374 */
375 switch (c->cputype) {
376 case CPU_24K:
377 case CPU_34K:
378 case CPU_74K:
379 case CPU_P5600:
380 case CPU_P6600:
381 c->options |= MIPS_CPU_MM_FULL;
382 update = MIPS_CONF_MM_FULL;
383 break;
384 case CPU_1004K:
385 case CPU_1074K:
386 case CPU_INTERAPTIV:
387 case CPU_PROAPTIV:
388 mm = 0;
389 fallthrough;
390 default:
391 update = 0;
392 break;
393 }
394
395 if (update) {
396 config0 = (config0 & ~MIPS_CONF_MM) | update;
397 write_c0_config(config0);
398 } else if (mm == MIPS_CONF_MM_SYSAD) {
399 c->options |= MIPS_CPU_MM_SYSAD;
400 } else if (mm == MIPS_CONF_MM_FULL) {
401 c->options |= MIPS_CPU_MM_FULL;
402 }
403
404 return 0;
405 }
406
decode_config0(struct cpuinfo_mips * c)407 static inline unsigned int decode_config0(struct cpuinfo_mips *c)
408 {
409 unsigned int config0;
410 int isa, mt;
411
412 config0 = read_c0_config();
413
414 /*
415 * Look for Standard TLB or Dual VTLB and FTLB
416 */
417 mt = config0 & MIPS_CONF_MT;
418 if (mt == MIPS_CONF_MT_TLB)
419 c->options |= MIPS_CPU_TLB;
420 else if (mt == MIPS_CONF_MT_FTLB)
421 c->options |= MIPS_CPU_TLB | MIPS_CPU_FTLB;
422
423 isa = (config0 & MIPS_CONF_AT) >> 13;
424 switch (isa) {
425 case 0:
426 switch ((config0 & MIPS_CONF_AR) >> 10) {
427 case 0:
428 set_isa(c, MIPS_CPU_ISA_M32R1);
429 break;
430 case 1:
431 set_isa(c, MIPS_CPU_ISA_M32R2);
432 break;
433 case 2:
434 set_isa(c, MIPS_CPU_ISA_M32R6);
435 break;
436 default:
437 goto unknown;
438 }
439 break;
440 case 2:
441 switch ((config0 & MIPS_CONF_AR) >> 10) {
442 case 0:
443 set_isa(c, MIPS_CPU_ISA_M64R1);
444 break;
445 case 1:
446 set_isa(c, MIPS_CPU_ISA_M64R2);
447 break;
448 case 2:
449 set_isa(c, MIPS_CPU_ISA_M64R6);
450 break;
451 default:
452 goto unknown;
453 }
454 break;
455 default:
456 goto unknown;
457 }
458
459 return config0 & MIPS_CONF_M;
460
461 unknown:
462 panic(unknown_isa, config0);
463 }
464
decode_config1(struct cpuinfo_mips * c)465 static inline unsigned int decode_config1(struct cpuinfo_mips *c)
466 {
467 unsigned int config1;
468
469 config1 = read_c0_config1();
470
471 if (config1 & MIPS_CONF1_MD)
472 c->ases |= MIPS_ASE_MDMX;
473 if (config1 & MIPS_CONF1_PC)
474 c->options |= MIPS_CPU_PERF;
475 if (config1 & MIPS_CONF1_WR)
476 c->options |= MIPS_CPU_WATCH;
477 if (config1 & MIPS_CONF1_CA)
478 c->ases |= MIPS_ASE_MIPS16;
479 if (config1 & MIPS_CONF1_EP)
480 c->options |= MIPS_CPU_EJTAG;
481 if (config1 & MIPS_CONF1_FP) {
482 c->options |= MIPS_CPU_FPU;
483 c->options |= MIPS_CPU_32FPR;
484 }
485 if (cpu_has_tlb) {
486 c->tlbsize = ((config1 & MIPS_CONF1_TLBS) >> 25) + 1;
487 c->tlbsizevtlb = c->tlbsize;
488 c->tlbsizeftlbsets = 0;
489 }
490
491 return config1 & MIPS_CONF_M;
492 }
493
decode_config2(struct cpuinfo_mips * c)494 static inline unsigned int decode_config2(struct cpuinfo_mips *c)
495 {
496 unsigned int config2;
497
498 config2 = read_c0_config2();
499
500 if (config2 & MIPS_CONF2_SL)
501 c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT;
502
503 return config2 & MIPS_CONF_M;
504 }
505
decode_config3(struct cpuinfo_mips * c)506 static inline unsigned int decode_config3(struct cpuinfo_mips *c)
507 {
508 unsigned int config3;
509
510 config3 = read_c0_config3();
511
512 if (config3 & MIPS_CONF3_SM) {
513 c->ases |= MIPS_ASE_SMARTMIPS;
514 c->options |= MIPS_CPU_RIXI | MIPS_CPU_CTXTC;
515 }
516 if (config3 & MIPS_CONF3_RXI)
517 c->options |= MIPS_CPU_RIXI;
518 if (config3 & MIPS_CONF3_CTXTC)
519 c->options |= MIPS_CPU_CTXTC;
520 if (config3 & MIPS_CONF3_DSP)
521 c->ases |= MIPS_ASE_DSP;
522 if (config3 & MIPS_CONF3_DSP2P) {
523 c->ases |= MIPS_ASE_DSP2P;
524 if (cpu_has_mips_r6)
525 c->ases |= MIPS_ASE_DSP3;
526 }
527 if (config3 & MIPS_CONF3_VINT)
528 c->options |= MIPS_CPU_VINT;
529 if (config3 & MIPS_CONF3_VEIC)
530 c->options |= MIPS_CPU_VEIC;
531 if (config3 & MIPS_CONF3_LPA)
532 c->options |= MIPS_CPU_LPA;
533 if (config3 & MIPS_CONF3_MT)
534 c->ases |= MIPS_ASE_MIPSMT;
535 if (config3 & MIPS_CONF3_ULRI)
536 c->options |= MIPS_CPU_ULRI;
537 if (config3 & MIPS_CONF3_ISA)
538 c->options |= MIPS_CPU_MICROMIPS;
539 if (config3 & MIPS_CONF3_VZ)
540 c->ases |= MIPS_ASE_VZ;
541 if (config3 & MIPS_CONF3_SC)
542 c->options |= MIPS_CPU_SEGMENTS;
543 if (config3 & MIPS_CONF3_BI)
544 c->options |= MIPS_CPU_BADINSTR;
545 if (config3 & MIPS_CONF3_BP)
546 c->options |= MIPS_CPU_BADINSTRP;
547 if (config3 & MIPS_CONF3_MSA)
548 c->ases |= MIPS_ASE_MSA;
549 if (config3 & MIPS_CONF3_PW) {
550 c->htw_seq = 0;
551 c->options |= MIPS_CPU_HTW;
552 }
553 if (config3 & MIPS_CONF3_CDMM)
554 c->options |= MIPS_CPU_CDMM;
555 if (config3 & MIPS_CONF3_SP)
556 c->options |= MIPS_CPU_SP;
557
558 return config3 & MIPS_CONF_M;
559 }
560
decode_config4(struct cpuinfo_mips * c)561 static inline unsigned int decode_config4(struct cpuinfo_mips *c)
562 {
563 unsigned int config4;
564 unsigned int newcf4;
565 unsigned int mmuextdef;
566 unsigned int ftlb_page = MIPS_CONF4_FTLBPAGESIZE;
567 unsigned long asid_mask;
568
569 config4 = read_c0_config4();
570
571 if (cpu_has_tlb) {
572 if (((config4 & MIPS_CONF4_IE) >> 29) == 2)
573 c->options |= MIPS_CPU_TLBINV;
574
575 /*
576 * R6 has dropped the MMUExtDef field from config4.
577 * On R6 the fields always describe the FTLB, and only if it is
578 * present according to Config.MT.
579 */
580 if (!cpu_has_mips_r6)
581 mmuextdef = config4 & MIPS_CONF4_MMUEXTDEF;
582 else if (cpu_has_ftlb)
583 mmuextdef = MIPS_CONF4_MMUEXTDEF_VTLBSIZEEXT;
584 else
585 mmuextdef = 0;
586
587 switch (mmuextdef) {
588 case MIPS_CONF4_MMUEXTDEF_MMUSIZEEXT:
589 c->tlbsize += (config4 & MIPS_CONF4_MMUSIZEEXT) * 0x40;
590 c->tlbsizevtlb = c->tlbsize;
591 break;
592 case MIPS_CONF4_MMUEXTDEF_VTLBSIZEEXT:
593 c->tlbsizevtlb +=
594 ((config4 & MIPS_CONF4_VTLBSIZEEXT) >>
595 MIPS_CONF4_VTLBSIZEEXT_SHIFT) * 0x40;
596 c->tlbsize = c->tlbsizevtlb;
597 ftlb_page = MIPS_CONF4_VFTLBPAGESIZE;
598 fallthrough;
599 case MIPS_CONF4_MMUEXTDEF_FTLBSIZEEXT:
600 if (mips_ftlb_disabled)
601 break;
602 newcf4 = (config4 & ~ftlb_page) |
603 (page_size_ftlb(mmuextdef) <<
604 MIPS_CONF4_FTLBPAGESIZE_SHIFT);
605 write_c0_config4(newcf4);
606 back_to_back_c0_hazard();
607 config4 = read_c0_config4();
608 if (config4 != newcf4) {
609 pr_err("PAGE_SIZE 0x%lx is not supported by FTLB (config4=0x%x)\n",
610 PAGE_SIZE, config4);
611 /* Switch FTLB off */
612 set_ftlb_enable(c, 0);
613 mips_ftlb_disabled = 1;
614 break;
615 }
616 c->tlbsizeftlbsets = 1 <<
617 ((config4 & MIPS_CONF4_FTLBSETS) >>
618 MIPS_CONF4_FTLBSETS_SHIFT);
619 c->tlbsizeftlbways = ((config4 & MIPS_CONF4_FTLBWAYS) >>
620 MIPS_CONF4_FTLBWAYS_SHIFT) + 2;
621 c->tlbsize += c->tlbsizeftlbways * c->tlbsizeftlbsets;
622 mips_has_ftlb_configured = 1;
623 break;
624 }
625 }
626
627 c->kscratch_mask = (config4 & MIPS_CONF4_KSCREXIST)
628 >> MIPS_CONF4_KSCREXIST_SHIFT;
629
630 asid_mask = MIPS_ENTRYHI_ASID;
631 if (config4 & MIPS_CONF4_AE)
632 asid_mask |= MIPS_ENTRYHI_ASIDX;
633 set_cpu_asid_mask(c, asid_mask);
634
635 /*
636 * Warn if the computed ASID mask doesn't match the mask the kernel
637 * is built for. This may indicate either a serious problem or an
638 * easy optimisation opportunity, but either way should be addressed.
639 */
640 WARN_ON(asid_mask != cpu_asid_mask(c));
641
642 return config4 & MIPS_CONF_M;
643 }
644
decode_config5(struct cpuinfo_mips * c)645 static inline unsigned int decode_config5(struct cpuinfo_mips *c)
646 {
647 unsigned int config5, max_mmid_width;
648 unsigned long asid_mask;
649
650 config5 = read_c0_config5();
651 config5 &= ~(MIPS_CONF5_UFR | MIPS_CONF5_UFE);
652
653 if (cpu_has_mips_r6) {
654 if (!mmid_disabled_quirk && (!__builtin_constant_p(cpu_has_mmid) || cpu_has_mmid))
655 config5 |= MIPS_CONF5_MI;
656 else
657 config5 &= ~MIPS_CONF5_MI;
658 }
659
660 write_c0_config5(config5);
661
662 if (config5 & MIPS_CONF5_EVA)
663 c->options |= MIPS_CPU_EVA;
664 if (config5 & MIPS_CONF5_MRP)
665 c->options |= MIPS_CPU_MAAR;
666 if (config5 & MIPS_CONF5_LLB)
667 c->options |= MIPS_CPU_RW_LLB;
668 if (config5 & MIPS_CONF5_MVH)
669 c->options |= MIPS_CPU_MVH;
670 if (cpu_has_mips_r6 && (config5 & MIPS_CONF5_VP))
671 c->options |= MIPS_CPU_VP;
672 if (config5 & MIPS_CONF5_CA2)
673 c->ases |= MIPS_ASE_MIPS16E2;
674
675 if (config5 & MIPS_CONF5_CRCP)
676 elf_hwcap |= HWCAP_MIPS_CRC32;
677
678 if (cpu_has_mips_r6) {
679 /* Ensure the write to config5 above takes effect */
680 back_to_back_c0_hazard();
681
682 /* Check whether we successfully enabled MMID support */
683 config5 = read_c0_config5();
684 if (config5 & MIPS_CONF5_MI)
685 c->options |= MIPS_CPU_MMID;
686
687 /*
688 * Warn if we've hardcoded cpu_has_mmid to a value unsuitable
689 * for the CPU we're running on, or if CPUs in an SMP system
690 * have inconsistent MMID support.
691 */
692 WARN_ON(!!cpu_has_mmid != !!(config5 & MIPS_CONF5_MI));
693
694 if (cpu_has_mmid) {
695 write_c0_memorymapid(~0ul);
696 back_to_back_c0_hazard();
697 asid_mask = read_c0_memorymapid();
698
699 /*
700 * We maintain a bitmap to track MMID allocation, and
701 * need a sensible upper bound on the size of that
702 * bitmap. The initial CPU with MMID support (I6500)
703 * supports 16 bit MMIDs, which gives us an 8KiB
704 * bitmap. The architecture recommends that hardware
705 * support 32 bit MMIDs, which would give us a 512MiB
706 * bitmap - that's too big in most cases.
707 *
708 * Cap MMID width at 16 bits for now & we can revisit
709 * this if & when hardware supports anything wider.
710 */
711 max_mmid_width = 16;
712 if (asid_mask > GENMASK(max_mmid_width - 1, 0)) {
713 pr_info("Capping MMID width at %d bits",
714 max_mmid_width);
715 asid_mask = GENMASK(max_mmid_width - 1, 0);
716 }
717 set_cpu_asid_mask(c, asid_mask);
718 }
719 }
720
721 return config5 & MIPS_CONF_M;
722 }
723
decode_configs(struct cpuinfo_mips * c)724 static void decode_configs(struct cpuinfo_mips *c)
725 {
726 int ok;
727
728 /* MIPS32 or MIPS64 compliant CPU. */
729 c->options = MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE | MIPS_CPU_COUNTER |
730 MIPS_CPU_DIVEC | MIPS_CPU_LLSC | MIPS_CPU_MCHECK;
731
732 c->scache.flags = MIPS_CACHE_NOT_PRESENT;
733
734 /* Enable FTLB if present and not disabled */
735 set_ftlb_enable(c, mips_ftlb_disabled ? 0 : FTLB_EN);
736
737 ok = decode_config0(c); /* Read Config registers. */
738 BUG_ON(!ok); /* Arch spec violation! */
739 if (ok)
740 ok = decode_config1(c);
741 if (ok)
742 ok = decode_config2(c);
743 if (ok)
744 ok = decode_config3(c);
745 if (ok)
746 ok = decode_config4(c);
747 if (ok)
748 ok = decode_config5(c);
749
750 /* Probe the EBase.WG bit */
751 if (cpu_has_mips_r2_r6) {
752 u64 ebase;
753 unsigned int status;
754
755 /* {read,write}_c0_ebase_64() may be UNDEFINED prior to r6 */
756 ebase = cpu_has_mips64r6 ? read_c0_ebase_64()
757 : (s32)read_c0_ebase();
758 if (ebase & MIPS_EBASE_WG) {
759 /* WG bit already set, we can avoid the clumsy probe */
760 c->options |= MIPS_CPU_EBASE_WG;
761 } else {
762 /* Its UNDEFINED to change EBase while BEV=0 */
763 status = read_c0_status();
764 write_c0_status(status | ST0_BEV);
765 irq_enable_hazard();
766 /*
767 * On pre-r6 cores, this may well clobber the upper bits
768 * of EBase. This is hard to avoid without potentially
769 * hitting UNDEFINED dm*c0 behaviour if EBase is 32-bit.
770 */
771 if (cpu_has_mips64r6)
772 write_c0_ebase_64(ebase | MIPS_EBASE_WG);
773 else
774 write_c0_ebase(ebase | MIPS_EBASE_WG);
775 back_to_back_c0_hazard();
776 /* Restore BEV */
777 write_c0_status(status);
778 if (read_c0_ebase() & MIPS_EBASE_WG) {
779 c->options |= MIPS_CPU_EBASE_WG;
780 write_c0_ebase(ebase);
781 }
782 }
783 }
784
785 /* configure the FTLB write probability */
786 set_ftlb_enable(c, (mips_ftlb_disabled ? 0 : FTLB_EN) | FTLB_SET_PROB);
787
788 mips_probe_watch_registers(c);
789
790 #ifndef CONFIG_MIPS_CPS
791 if (cpu_has_mips_r2_r6) {
792 unsigned int core;
793
794 core = get_ebase_cpunum();
795 if (cpu_has_mipsmt)
796 core >>= fls(core_nvpes()) - 1;
797 cpu_set_core(c, core);
798 }
799 #endif
800 }
801
802 /*
803 * Probe for certain guest capabilities by writing config bits and reading back.
804 * Finally write back the original value.
805 */
806 #define probe_gc0_config(name, maxconf, bits) \
807 do { \
808 unsigned int tmp; \
809 tmp = read_gc0_##name(); \
810 write_gc0_##name(tmp | (bits)); \
811 back_to_back_c0_hazard(); \
812 maxconf = read_gc0_##name(); \
813 write_gc0_##name(tmp); \
814 } while (0)
815
816 /*
817 * Probe for dynamic guest capabilities by changing certain config bits and
818 * reading back to see if they change. Finally write back the original value.
819 */
820 #define probe_gc0_config_dyn(name, maxconf, dynconf, bits) \
821 do { \
822 maxconf = read_gc0_##name(); \
823 write_gc0_##name(maxconf ^ (bits)); \
824 back_to_back_c0_hazard(); \
825 dynconf = maxconf ^ read_gc0_##name(); \
826 write_gc0_##name(maxconf); \
827 maxconf |= dynconf; \
828 } while (0)
829
decode_guest_config0(struct cpuinfo_mips * c)830 static inline unsigned int decode_guest_config0(struct cpuinfo_mips *c)
831 {
832 unsigned int config0;
833
834 probe_gc0_config(config, config0, MIPS_CONF_M);
835
836 if (config0 & MIPS_CONF_M)
837 c->guest.conf |= BIT(1);
838 return config0 & MIPS_CONF_M;
839 }
840
decode_guest_config1(struct cpuinfo_mips * c)841 static inline unsigned int decode_guest_config1(struct cpuinfo_mips *c)
842 {
843 unsigned int config1, config1_dyn;
844
845 probe_gc0_config_dyn(config1, config1, config1_dyn,
846 MIPS_CONF_M | MIPS_CONF1_PC | MIPS_CONF1_WR |
847 MIPS_CONF1_FP);
848
849 if (config1 & MIPS_CONF1_FP)
850 c->guest.options |= MIPS_CPU_FPU;
851 if (config1_dyn & MIPS_CONF1_FP)
852 c->guest.options_dyn |= MIPS_CPU_FPU;
853
854 if (config1 & MIPS_CONF1_WR)
855 c->guest.options |= MIPS_CPU_WATCH;
856 if (config1_dyn & MIPS_CONF1_WR)
857 c->guest.options_dyn |= MIPS_CPU_WATCH;
858
859 if (config1 & MIPS_CONF1_PC)
860 c->guest.options |= MIPS_CPU_PERF;
861 if (config1_dyn & MIPS_CONF1_PC)
862 c->guest.options_dyn |= MIPS_CPU_PERF;
863
864 if (config1 & MIPS_CONF_M)
865 c->guest.conf |= BIT(2);
866 return config1 & MIPS_CONF_M;
867 }
868
decode_guest_config2(struct cpuinfo_mips * c)869 static inline unsigned int decode_guest_config2(struct cpuinfo_mips *c)
870 {
871 unsigned int config2;
872
873 probe_gc0_config(config2, config2, MIPS_CONF_M);
874
875 if (config2 & MIPS_CONF_M)
876 c->guest.conf |= BIT(3);
877 return config2 & MIPS_CONF_M;
878 }
879
decode_guest_config3(struct cpuinfo_mips * c)880 static inline unsigned int decode_guest_config3(struct cpuinfo_mips *c)
881 {
882 unsigned int config3, config3_dyn;
883
884 probe_gc0_config_dyn(config3, config3, config3_dyn,
885 MIPS_CONF_M | MIPS_CONF3_MSA | MIPS_CONF3_ULRI |
886 MIPS_CONF3_CTXTC);
887
888 if (config3 & MIPS_CONF3_CTXTC)
889 c->guest.options |= MIPS_CPU_CTXTC;
890 if (config3_dyn & MIPS_CONF3_CTXTC)
891 c->guest.options_dyn |= MIPS_CPU_CTXTC;
892
893 if (config3 & MIPS_CONF3_PW)
894 c->guest.options |= MIPS_CPU_HTW;
895
896 if (config3 & MIPS_CONF3_ULRI)
897 c->guest.options |= MIPS_CPU_ULRI;
898
899 if (config3 & MIPS_CONF3_SC)
900 c->guest.options |= MIPS_CPU_SEGMENTS;
901
902 if (config3 & MIPS_CONF3_BI)
903 c->guest.options |= MIPS_CPU_BADINSTR;
904 if (config3 & MIPS_CONF3_BP)
905 c->guest.options |= MIPS_CPU_BADINSTRP;
906
907 if (config3 & MIPS_CONF3_MSA)
908 c->guest.ases |= MIPS_ASE_MSA;
909 if (config3_dyn & MIPS_CONF3_MSA)
910 c->guest.ases_dyn |= MIPS_ASE_MSA;
911
912 if (config3 & MIPS_CONF_M)
913 c->guest.conf |= BIT(4);
914 return config3 & MIPS_CONF_M;
915 }
916
decode_guest_config4(struct cpuinfo_mips * c)917 static inline unsigned int decode_guest_config4(struct cpuinfo_mips *c)
918 {
919 unsigned int config4;
920
921 probe_gc0_config(config4, config4,
922 MIPS_CONF_M | MIPS_CONF4_KSCREXIST);
923
924 c->guest.kscratch_mask = (config4 & MIPS_CONF4_KSCREXIST)
925 >> MIPS_CONF4_KSCREXIST_SHIFT;
926
927 if (config4 & MIPS_CONF_M)
928 c->guest.conf |= BIT(5);
929 return config4 & MIPS_CONF_M;
930 }
931
decode_guest_config5(struct cpuinfo_mips * c)932 static inline unsigned int decode_guest_config5(struct cpuinfo_mips *c)
933 {
934 unsigned int config5, config5_dyn;
935
936 probe_gc0_config_dyn(config5, config5, config5_dyn,
937 MIPS_CONF_M | MIPS_CONF5_MVH | MIPS_CONF5_MRP);
938
939 if (config5 & MIPS_CONF5_MRP)
940 c->guest.options |= MIPS_CPU_MAAR;
941 if (config5_dyn & MIPS_CONF5_MRP)
942 c->guest.options_dyn |= MIPS_CPU_MAAR;
943
944 if (config5 & MIPS_CONF5_LLB)
945 c->guest.options |= MIPS_CPU_RW_LLB;
946
947 if (config5 & MIPS_CONF5_MVH)
948 c->guest.options |= MIPS_CPU_MVH;
949
950 if (config5 & MIPS_CONF_M)
951 c->guest.conf |= BIT(6);
952 return config5 & MIPS_CONF_M;
953 }
954
decode_guest_configs(struct cpuinfo_mips * c)955 static inline void decode_guest_configs(struct cpuinfo_mips *c)
956 {
957 unsigned int ok;
958
959 ok = decode_guest_config0(c);
960 if (ok)
961 ok = decode_guest_config1(c);
962 if (ok)
963 ok = decode_guest_config2(c);
964 if (ok)
965 ok = decode_guest_config3(c);
966 if (ok)
967 ok = decode_guest_config4(c);
968 if (ok)
969 decode_guest_config5(c);
970 }
971
cpu_probe_guestctl0(struct cpuinfo_mips * c)972 static inline void cpu_probe_guestctl0(struct cpuinfo_mips *c)
973 {
974 unsigned int guestctl0, temp;
975
976 guestctl0 = read_c0_guestctl0();
977
978 if (guestctl0 & MIPS_GCTL0_G0E)
979 c->options |= MIPS_CPU_GUESTCTL0EXT;
980 if (guestctl0 & MIPS_GCTL0_G1)
981 c->options |= MIPS_CPU_GUESTCTL1;
982 if (guestctl0 & MIPS_GCTL0_G2)
983 c->options |= MIPS_CPU_GUESTCTL2;
984 if (!(guestctl0 & MIPS_GCTL0_RAD)) {
985 c->options |= MIPS_CPU_GUESTID;
986
987 /*
988 * Probe for Direct Root to Guest (DRG). Set GuestCtl1.RID = 0
989 * first, otherwise all data accesses will be fully virtualised
990 * as if they were performed by guest mode.
991 */
992 write_c0_guestctl1(0);
993 tlbw_use_hazard();
994
995 write_c0_guestctl0(guestctl0 | MIPS_GCTL0_DRG);
996 back_to_back_c0_hazard();
997 temp = read_c0_guestctl0();
998
999 if (temp & MIPS_GCTL0_DRG) {
1000 write_c0_guestctl0(guestctl0);
1001 c->options |= MIPS_CPU_DRG;
1002 }
1003 }
1004 }
1005
cpu_probe_guestctl1(struct cpuinfo_mips * c)1006 static inline void cpu_probe_guestctl1(struct cpuinfo_mips *c)
1007 {
1008 if (cpu_has_guestid) {
1009 /* determine the number of bits of GuestID available */
1010 write_c0_guestctl1(MIPS_GCTL1_ID);
1011 back_to_back_c0_hazard();
1012 c->guestid_mask = (read_c0_guestctl1() & MIPS_GCTL1_ID)
1013 >> MIPS_GCTL1_ID_SHIFT;
1014 write_c0_guestctl1(0);
1015 }
1016 }
1017
cpu_probe_gtoffset(struct cpuinfo_mips * c)1018 static inline void cpu_probe_gtoffset(struct cpuinfo_mips *c)
1019 {
1020 /* determine the number of bits of GTOffset available */
1021 write_c0_gtoffset(0xffffffff);
1022 back_to_back_c0_hazard();
1023 c->gtoffset_mask = read_c0_gtoffset();
1024 write_c0_gtoffset(0);
1025 }
1026
cpu_probe_vz(struct cpuinfo_mips * c)1027 static inline void cpu_probe_vz(struct cpuinfo_mips *c)
1028 {
1029 cpu_probe_guestctl0(c);
1030 if (cpu_has_guestctl1)
1031 cpu_probe_guestctl1(c);
1032
1033 cpu_probe_gtoffset(c);
1034
1035 decode_guest_configs(c);
1036 }
1037
1038 #define R4K_OPTS (MIPS_CPU_TLB | MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE \
1039 | MIPS_CPU_COUNTER)
1040
cpu_probe_legacy(struct cpuinfo_mips * c,unsigned int cpu)1041 static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
1042 {
1043 switch (c->processor_id & PRID_IMP_MASK) {
1044 case PRID_IMP_R2000:
1045 c->cputype = CPU_R2000;
1046 __cpu_name[cpu] = "R2000";
1047 c->fpu_msk31 |= FPU_CSR_CONDX | FPU_CSR_FS;
1048 c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE |
1049 MIPS_CPU_NOFPUEX;
1050 if (__cpu_has_fpu())
1051 c->options |= MIPS_CPU_FPU;
1052 c->tlbsize = 64;
1053 break;
1054 case PRID_IMP_R3000:
1055 if ((c->processor_id & PRID_REV_MASK) == PRID_REV_R3000A) {
1056 if (cpu_has_confreg()) {
1057 c->cputype = CPU_R3081E;
1058 __cpu_name[cpu] = "R3081";
1059 } else {
1060 c->cputype = CPU_R3000A;
1061 __cpu_name[cpu] = "R3000A";
1062 }
1063 } else {
1064 c->cputype = CPU_R3000;
1065 __cpu_name[cpu] = "R3000";
1066 }
1067 c->fpu_msk31 |= FPU_CSR_CONDX | FPU_CSR_FS;
1068 c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE |
1069 MIPS_CPU_NOFPUEX;
1070 if (__cpu_has_fpu())
1071 c->options |= MIPS_CPU_FPU;
1072 c->tlbsize = 64;
1073 break;
1074 case PRID_IMP_R4000:
1075 if (read_c0_config() & CONF_SC) {
1076 if ((c->processor_id & PRID_REV_MASK) >=
1077 PRID_REV_R4400) {
1078 c->cputype = CPU_R4400PC;
1079 __cpu_name[cpu] = "R4400PC";
1080 } else {
1081 c->cputype = CPU_R4000PC;
1082 __cpu_name[cpu] = "R4000PC";
1083 }
1084 } else {
1085 int cca = read_c0_config() & CONF_CM_CMASK;
1086 int mc;
1087
1088 /*
1089 * SC and MC versions can't be reliably told apart,
1090 * but only the latter support coherent caching
1091 * modes so assume the firmware has set the KSEG0
1092 * coherency attribute reasonably (if uncached, we
1093 * assume SC).
1094 */
1095 switch (cca) {
1096 case CONF_CM_CACHABLE_CE:
1097 case CONF_CM_CACHABLE_COW:
1098 case CONF_CM_CACHABLE_CUW:
1099 mc = 1;
1100 break;
1101 default:
1102 mc = 0;
1103 break;
1104 }
1105 if ((c->processor_id & PRID_REV_MASK) >=
1106 PRID_REV_R4400) {
1107 c->cputype = mc ? CPU_R4400MC : CPU_R4400SC;
1108 __cpu_name[cpu] = mc ? "R4400MC" : "R4400SC";
1109 } else {
1110 c->cputype = mc ? CPU_R4000MC : CPU_R4000SC;
1111 __cpu_name[cpu] = mc ? "R4000MC" : "R4000SC";
1112 }
1113 }
1114
1115 set_isa(c, MIPS_CPU_ISA_III);
1116 c->fpu_msk31 |= FPU_CSR_CONDX;
1117 c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
1118 MIPS_CPU_WATCH | MIPS_CPU_VCE |
1119 MIPS_CPU_LLSC;
1120 c->tlbsize = 48;
1121 break;
1122 case PRID_IMP_R4300:
1123 c->cputype = CPU_R4300;
1124 __cpu_name[cpu] = "R4300";
1125 set_isa(c, MIPS_CPU_ISA_III);
1126 c->fpu_msk31 |= FPU_CSR_CONDX;
1127 c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
1128 MIPS_CPU_LLSC;
1129 c->tlbsize = 32;
1130 break;
1131 case PRID_IMP_R4600:
1132 c->cputype = CPU_R4600;
1133 __cpu_name[cpu] = "R4600";
1134 set_isa(c, MIPS_CPU_ISA_III);
1135 c->fpu_msk31 |= FPU_CSR_CONDX;
1136 c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
1137 MIPS_CPU_LLSC;
1138 c->tlbsize = 48;
1139 break;
1140 #if 0
1141 case PRID_IMP_R4650:
1142 /*
1143 * This processor doesn't have an MMU, so it's not
1144 * "real easy" to run Linux on it. It is left purely
1145 * for documentation. Commented out because it shares
1146 * its c0_prid id number with the TX3900.
1147 */
1148 c->cputype = CPU_R4650;
1149 __cpu_name[cpu] = "R4650";
1150 set_isa(c, MIPS_CPU_ISA_III);
1151 c->fpu_msk31 |= FPU_CSR_CONDX;
1152 c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_LLSC;
1153 c->tlbsize = 48;
1154 break;
1155 #endif
1156 case PRID_IMP_R4700:
1157 c->cputype = CPU_R4700;
1158 __cpu_name[cpu] = "R4700";
1159 set_isa(c, MIPS_CPU_ISA_III);
1160 c->fpu_msk31 |= FPU_CSR_CONDX;
1161 c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
1162 MIPS_CPU_LLSC;
1163 c->tlbsize = 48;
1164 break;
1165 case PRID_IMP_TX49:
1166 c->cputype = CPU_TX49XX;
1167 __cpu_name[cpu] = "R49XX";
1168 set_isa(c, MIPS_CPU_ISA_III);
1169 c->fpu_msk31 |= FPU_CSR_CONDX;
1170 c->options = R4K_OPTS | MIPS_CPU_LLSC;
1171 if (!(c->processor_id & 0x08))
1172 c->options |= MIPS_CPU_FPU | MIPS_CPU_32FPR;
1173 c->tlbsize = 48;
1174 break;
1175 case PRID_IMP_R5000:
1176 c->cputype = CPU_R5000;
1177 __cpu_name[cpu] = "R5000";
1178 set_isa(c, MIPS_CPU_ISA_IV);
1179 c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
1180 MIPS_CPU_LLSC;
1181 c->tlbsize = 48;
1182 break;
1183 case PRID_IMP_R5500:
1184 c->cputype = CPU_R5500;
1185 __cpu_name[cpu] = "R5500";
1186 set_isa(c, MIPS_CPU_ISA_IV);
1187 c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
1188 MIPS_CPU_WATCH | MIPS_CPU_LLSC;
1189 c->tlbsize = 48;
1190 break;
1191 case PRID_IMP_NEVADA:
1192 c->cputype = CPU_NEVADA;
1193 __cpu_name[cpu] = "Nevada";
1194 set_isa(c, MIPS_CPU_ISA_IV);
1195 c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
1196 MIPS_CPU_DIVEC | MIPS_CPU_LLSC;
1197 c->tlbsize = 48;
1198 break;
1199 case PRID_IMP_RM7000:
1200 c->cputype = CPU_RM7000;
1201 __cpu_name[cpu] = "RM7000";
1202 set_isa(c, MIPS_CPU_ISA_IV);
1203 c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
1204 MIPS_CPU_LLSC;
1205 /*
1206 * Undocumented RM7000: Bit 29 in the info register of
1207 * the RM7000 v2.0 indicates if the TLB has 48 or 64
1208 * entries.
1209 *
1210 * 29 1 => 64 entry JTLB
1211 * 0 => 48 entry JTLB
1212 */
1213 c->tlbsize = (read_c0_info() & (1 << 29)) ? 64 : 48;
1214 break;
1215 case PRID_IMP_R10000:
1216 c->cputype = CPU_R10000;
1217 __cpu_name[cpu] = "R10000";
1218 set_isa(c, MIPS_CPU_ISA_IV);
1219 c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
1220 MIPS_CPU_FPU | MIPS_CPU_32FPR |
1221 MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
1222 MIPS_CPU_LLSC;
1223 c->tlbsize = 64;
1224 break;
1225 case PRID_IMP_R12000:
1226 c->cputype = CPU_R12000;
1227 __cpu_name[cpu] = "R12000";
1228 set_isa(c, MIPS_CPU_ISA_IV);
1229 c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
1230 MIPS_CPU_FPU | MIPS_CPU_32FPR |
1231 MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
1232 MIPS_CPU_LLSC;
1233 c->tlbsize = 64;
1234 write_c0_r10k_diag(read_c0_r10k_diag() | R10K_DIAG_E_GHIST);
1235 break;
1236 case PRID_IMP_R14000:
1237 if (((c->processor_id >> 4) & 0x0f) > 2) {
1238 c->cputype = CPU_R16000;
1239 __cpu_name[cpu] = "R16000";
1240 } else {
1241 c->cputype = CPU_R14000;
1242 __cpu_name[cpu] = "R14000";
1243 }
1244 set_isa(c, MIPS_CPU_ISA_IV);
1245 c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
1246 MIPS_CPU_FPU | MIPS_CPU_32FPR |
1247 MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
1248 MIPS_CPU_LLSC;
1249 c->tlbsize = 64;
1250 write_c0_r10k_diag(read_c0_r10k_diag() | R10K_DIAG_E_GHIST);
1251 break;
1252 case PRID_IMP_LOONGSON_64C: /* Loongson-2/3 */
1253 switch (c->processor_id & PRID_REV_MASK) {
1254 case PRID_REV_LOONGSON2E:
1255 c->cputype = CPU_LOONGSON2EF;
1256 __cpu_name[cpu] = "ICT Loongson-2";
1257 set_elf_platform(cpu, "loongson2e");
1258 set_isa(c, MIPS_CPU_ISA_III);
1259 c->fpu_msk31 |= FPU_CSR_CONDX;
1260 break;
1261 case PRID_REV_LOONGSON2F:
1262 c->cputype = CPU_LOONGSON2EF;
1263 __cpu_name[cpu] = "ICT Loongson-2";
1264 set_elf_platform(cpu, "loongson2f");
1265 set_isa(c, MIPS_CPU_ISA_III);
1266 c->fpu_msk31 |= FPU_CSR_CONDX;
1267 break;
1268 case PRID_REV_LOONGSON3A_R1:
1269 c->cputype = CPU_LOONGSON64;
1270 __cpu_name[cpu] = "ICT Loongson-3";
1271 set_elf_platform(cpu, "loongson3a");
1272 set_isa(c, MIPS_CPU_ISA_M64R1);
1273 c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_CAM |
1274 MIPS_ASE_LOONGSON_EXT);
1275 break;
1276 case PRID_REV_LOONGSON3B_R1:
1277 case PRID_REV_LOONGSON3B_R2:
1278 c->cputype = CPU_LOONGSON64;
1279 __cpu_name[cpu] = "ICT Loongson-3";
1280 set_elf_platform(cpu, "loongson3b");
1281 set_isa(c, MIPS_CPU_ISA_M64R1);
1282 c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_CAM |
1283 MIPS_ASE_LOONGSON_EXT);
1284 break;
1285 }
1286
1287 c->options = R4K_OPTS |
1288 MIPS_CPU_FPU | MIPS_CPU_LLSC |
1289 MIPS_CPU_32FPR;
1290 c->tlbsize = 64;
1291 set_cpu_asid_mask(c, MIPS_ENTRYHI_ASID);
1292 c->writecombine = _CACHE_UNCACHED_ACCELERATED;
1293 break;
1294 case PRID_IMP_LOONGSON_32:
1295 decode_configs(c);
1296
1297 c->cputype = CPU_LOONGSON32;
1298
1299 switch (c->processor_id & PRID_REV_MASK) {
1300 case PRID_REV_LOONGSON1:
1301 __cpu_name[cpu] = "ICT Loongson-1";
1302 break;
1303 }
1304
1305 break;
1306 }
1307 }
1308
cpu_probe_mips(struct cpuinfo_mips * c,unsigned int cpu)1309 static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu)
1310 {
1311 c->writecombine = _CACHE_UNCACHED_ACCELERATED;
1312 switch (c->processor_id & PRID_IMP_MASK) {
1313 case PRID_IMP_QEMU_GENERIC:
1314 c->writecombine = _CACHE_UNCACHED;
1315 c->cputype = CPU_QEMU_GENERIC;
1316 __cpu_name[cpu] = "MIPS GENERIC QEMU";
1317 break;
1318 case PRID_IMP_4KC:
1319 c->cputype = CPU_4KC;
1320 c->writecombine = _CACHE_UNCACHED;
1321 __cpu_name[cpu] = "MIPS 4Kc";
1322 break;
1323 case PRID_IMP_4KEC:
1324 case PRID_IMP_4KECR2:
1325 c->cputype = CPU_4KEC;
1326 c->writecombine = _CACHE_UNCACHED;
1327 __cpu_name[cpu] = "MIPS 4KEc";
1328 break;
1329 case PRID_IMP_4KSC:
1330 case PRID_IMP_4KSD:
1331 c->cputype = CPU_4KSC;
1332 c->writecombine = _CACHE_UNCACHED;
1333 __cpu_name[cpu] = "MIPS 4KSc";
1334 break;
1335 case PRID_IMP_5KC:
1336 c->cputype = CPU_5KC;
1337 c->writecombine = _CACHE_UNCACHED;
1338 __cpu_name[cpu] = "MIPS 5Kc";
1339 break;
1340 case PRID_IMP_5KE:
1341 c->cputype = CPU_5KE;
1342 c->writecombine = _CACHE_UNCACHED;
1343 __cpu_name[cpu] = "MIPS 5KE";
1344 break;
1345 case PRID_IMP_20KC:
1346 c->cputype = CPU_20KC;
1347 c->writecombine = _CACHE_UNCACHED;
1348 __cpu_name[cpu] = "MIPS 20Kc";
1349 break;
1350 case PRID_IMP_24K:
1351 c->cputype = CPU_24K;
1352 c->writecombine = _CACHE_UNCACHED;
1353 __cpu_name[cpu] = "MIPS 24Kc";
1354 break;
1355 case PRID_IMP_24KE:
1356 c->cputype = CPU_24K;
1357 c->writecombine = _CACHE_UNCACHED;
1358 __cpu_name[cpu] = "MIPS 24KEc";
1359 break;
1360 case PRID_IMP_25KF:
1361 c->cputype = CPU_25KF;
1362 c->writecombine = _CACHE_UNCACHED;
1363 __cpu_name[cpu] = "MIPS 25Kc";
1364 break;
1365 case PRID_IMP_34K:
1366 c->cputype = CPU_34K;
1367 c->writecombine = _CACHE_UNCACHED;
1368 __cpu_name[cpu] = "MIPS 34Kc";
1369 cpu_set_mt_per_tc_perf(c);
1370 break;
1371 case PRID_IMP_74K:
1372 c->cputype = CPU_74K;
1373 c->writecombine = _CACHE_UNCACHED;
1374 __cpu_name[cpu] = "MIPS 74Kc";
1375 break;
1376 case PRID_IMP_M14KC:
1377 c->cputype = CPU_M14KC;
1378 c->writecombine = _CACHE_UNCACHED;
1379 __cpu_name[cpu] = "MIPS M14Kc";
1380 break;
1381 case PRID_IMP_M14KEC:
1382 c->cputype = CPU_M14KEC;
1383 c->writecombine = _CACHE_UNCACHED;
1384 __cpu_name[cpu] = "MIPS M14KEc";
1385 break;
1386 case PRID_IMP_1004K:
1387 c->cputype = CPU_1004K;
1388 c->writecombine = _CACHE_UNCACHED;
1389 __cpu_name[cpu] = "MIPS 1004Kc";
1390 cpu_set_mt_per_tc_perf(c);
1391 break;
1392 case PRID_IMP_1074K:
1393 c->cputype = CPU_1074K;
1394 c->writecombine = _CACHE_UNCACHED;
1395 __cpu_name[cpu] = "MIPS 1074Kc";
1396 break;
1397 case PRID_IMP_INTERAPTIV_UP:
1398 c->cputype = CPU_INTERAPTIV;
1399 __cpu_name[cpu] = "MIPS interAptiv";
1400 cpu_set_mt_per_tc_perf(c);
1401 break;
1402 case PRID_IMP_INTERAPTIV_MP:
1403 c->cputype = CPU_INTERAPTIV;
1404 __cpu_name[cpu] = "MIPS interAptiv (multi)";
1405 cpu_set_mt_per_tc_perf(c);
1406 break;
1407 case PRID_IMP_PROAPTIV_UP:
1408 c->cputype = CPU_PROAPTIV;
1409 __cpu_name[cpu] = "MIPS proAptiv";
1410 break;
1411 case PRID_IMP_PROAPTIV_MP:
1412 c->cputype = CPU_PROAPTIV;
1413 __cpu_name[cpu] = "MIPS proAptiv (multi)";
1414 break;
1415 case PRID_IMP_P5600:
1416 c->cputype = CPU_P5600;
1417 __cpu_name[cpu] = "MIPS P5600";
1418 break;
1419 case PRID_IMP_P6600:
1420 c->cputype = CPU_P6600;
1421 __cpu_name[cpu] = "MIPS P6600";
1422 break;
1423 case PRID_IMP_I6400:
1424 c->cputype = CPU_I6400;
1425 __cpu_name[cpu] = "MIPS I6400";
1426 break;
1427 case PRID_IMP_I6500:
1428 c->cputype = CPU_I6500;
1429 __cpu_name[cpu] = "MIPS I6500";
1430 break;
1431 case PRID_IMP_M5150:
1432 c->cputype = CPU_M5150;
1433 __cpu_name[cpu] = "MIPS M5150";
1434 break;
1435 case PRID_IMP_M6250:
1436 c->cputype = CPU_M6250;
1437 __cpu_name[cpu] = "MIPS M6250";
1438 break;
1439 }
1440
1441 decode_configs(c);
1442
1443 spram_config();
1444
1445 mm_config(c);
1446
1447 switch (__get_cpu_type(c->cputype)) {
1448 case CPU_M5150:
1449 case CPU_P5600:
1450 set_isa(c, MIPS_CPU_ISA_M32R5);
1451 break;
1452 case CPU_I6500:
1453 c->options |= MIPS_CPU_SHARED_FTLB_ENTRIES;
1454 fallthrough;
1455 case CPU_I6400:
1456 c->options |= MIPS_CPU_SHARED_FTLB_RAM;
1457 fallthrough;
1458 default:
1459 break;
1460 }
1461
1462 /* Recent MIPS cores use the implementation-dependent ExcCode 16 for
1463 * cache/FTLB parity exceptions.
1464 */
1465 switch (__get_cpu_type(c->cputype)) {
1466 case CPU_PROAPTIV:
1467 case CPU_P5600:
1468 case CPU_P6600:
1469 case CPU_I6400:
1470 case CPU_I6500:
1471 c->options |= MIPS_CPU_FTLBPAREX;
1472 break;
1473 }
1474 }
1475
cpu_probe_alchemy(struct cpuinfo_mips * c,unsigned int cpu)1476 static inline void cpu_probe_alchemy(struct cpuinfo_mips *c, unsigned int cpu)
1477 {
1478 decode_configs(c);
1479 switch (c->processor_id & PRID_IMP_MASK) {
1480 case PRID_IMP_AU1_REV1:
1481 case PRID_IMP_AU1_REV2:
1482 c->cputype = CPU_ALCHEMY;
1483 switch ((c->processor_id >> 24) & 0xff) {
1484 case 0:
1485 __cpu_name[cpu] = "Au1000";
1486 break;
1487 case 1:
1488 __cpu_name[cpu] = "Au1500";
1489 break;
1490 case 2:
1491 __cpu_name[cpu] = "Au1100";
1492 break;
1493 case 3:
1494 __cpu_name[cpu] = "Au1550";
1495 break;
1496 case 4:
1497 __cpu_name[cpu] = "Au1200";
1498 if ((c->processor_id & PRID_REV_MASK) == 2)
1499 __cpu_name[cpu] = "Au1250";
1500 break;
1501 case 5:
1502 __cpu_name[cpu] = "Au1210";
1503 break;
1504 default:
1505 __cpu_name[cpu] = "Au1xxx";
1506 break;
1507 }
1508 break;
1509 case PRID_IMP_NETLOGIC_AU13XX:
1510 c->cputype = CPU_ALCHEMY;
1511 __cpu_name[cpu] = "Au1300";
1512 break;
1513 }
1514 }
1515
cpu_probe_sibyte(struct cpuinfo_mips * c,unsigned int cpu)1516 static inline void cpu_probe_sibyte(struct cpuinfo_mips *c, unsigned int cpu)
1517 {
1518 decode_configs(c);
1519
1520 c->writecombine = _CACHE_UNCACHED_ACCELERATED;
1521 switch (c->processor_id & PRID_IMP_MASK) {
1522 case PRID_IMP_SB1:
1523 c->cputype = CPU_SB1;
1524 __cpu_name[cpu] = "SiByte SB1";
1525 /* FPU in pass1 is known to have issues. */
1526 if ((c->processor_id & PRID_REV_MASK) < 0x02)
1527 c->options &= ~(MIPS_CPU_FPU | MIPS_CPU_32FPR);
1528 break;
1529 case PRID_IMP_SB1A:
1530 c->cputype = CPU_SB1A;
1531 __cpu_name[cpu] = "SiByte SB1A";
1532 break;
1533 }
1534 }
1535
cpu_probe_sandcraft(struct cpuinfo_mips * c,unsigned int cpu)1536 static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c, unsigned int cpu)
1537 {
1538 decode_configs(c);
1539 switch (c->processor_id & PRID_IMP_MASK) {
1540 case PRID_IMP_SR71000:
1541 c->cputype = CPU_SR71000;
1542 __cpu_name[cpu] = "Sandcraft SR71000";
1543 c->scache.ways = 8;
1544 c->tlbsize = 64;
1545 break;
1546 }
1547 }
1548
cpu_probe_nxp(struct cpuinfo_mips * c,unsigned int cpu)1549 static inline void cpu_probe_nxp(struct cpuinfo_mips *c, unsigned int cpu)
1550 {
1551 decode_configs(c);
1552 switch (c->processor_id & PRID_IMP_MASK) {
1553 case PRID_IMP_PR4450:
1554 c->cputype = CPU_PR4450;
1555 __cpu_name[cpu] = "Philips PR4450";
1556 set_isa(c, MIPS_CPU_ISA_M32R1);
1557 break;
1558 }
1559 }
1560
cpu_probe_broadcom(struct cpuinfo_mips * c,unsigned int cpu)1561 static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
1562 {
1563 decode_configs(c);
1564 switch (c->processor_id & PRID_IMP_MASK) {
1565 case PRID_IMP_BMIPS32_REV4:
1566 case PRID_IMP_BMIPS32_REV8:
1567 c->cputype = CPU_BMIPS32;
1568 __cpu_name[cpu] = "Broadcom BMIPS32";
1569 set_elf_platform(cpu, "bmips32");
1570 break;
1571 case PRID_IMP_BMIPS3300:
1572 case PRID_IMP_BMIPS3300_ALT:
1573 case PRID_IMP_BMIPS3300_BUG:
1574 c->cputype = CPU_BMIPS3300;
1575 __cpu_name[cpu] = "Broadcom BMIPS3300";
1576 set_elf_platform(cpu, "bmips3300");
1577 reserve_exception_space(0x400, VECTORSPACING * 64);
1578 break;
1579 case PRID_IMP_BMIPS43XX: {
1580 int rev = c->processor_id & PRID_REV_MASK;
1581
1582 if (rev >= PRID_REV_BMIPS4380_LO &&
1583 rev <= PRID_REV_BMIPS4380_HI) {
1584 c->cputype = CPU_BMIPS4380;
1585 __cpu_name[cpu] = "Broadcom BMIPS4380";
1586 set_elf_platform(cpu, "bmips4380");
1587 c->options |= MIPS_CPU_RIXI;
1588 reserve_exception_space(0x400, VECTORSPACING * 64);
1589 } else {
1590 c->cputype = CPU_BMIPS4350;
1591 __cpu_name[cpu] = "Broadcom BMIPS4350";
1592 set_elf_platform(cpu, "bmips4350");
1593 }
1594 break;
1595 }
1596 case PRID_IMP_BMIPS5000:
1597 case PRID_IMP_BMIPS5200:
1598 c->cputype = CPU_BMIPS5000;
1599 if ((c->processor_id & PRID_IMP_MASK) == PRID_IMP_BMIPS5200)
1600 __cpu_name[cpu] = "Broadcom BMIPS5200";
1601 else
1602 __cpu_name[cpu] = "Broadcom BMIPS5000";
1603 set_elf_platform(cpu, "bmips5000");
1604 c->options |= MIPS_CPU_ULRI | MIPS_CPU_RIXI;
1605 reserve_exception_space(0x1000, VECTORSPACING * 64);
1606 break;
1607 }
1608 }
1609
cpu_probe_cavium(struct cpuinfo_mips * c,unsigned int cpu)1610 static inline void cpu_probe_cavium(struct cpuinfo_mips *c, unsigned int cpu)
1611 {
1612 decode_configs(c);
1613 /* Octeon has different cache interface */
1614 c->options &= ~MIPS_CPU_4K_CACHE;
1615 switch (c->processor_id & PRID_IMP_MASK) {
1616 case PRID_IMP_CAVIUM_CN38XX:
1617 case PRID_IMP_CAVIUM_CN31XX:
1618 case PRID_IMP_CAVIUM_CN30XX:
1619 c->cputype = CPU_CAVIUM_OCTEON;
1620 __cpu_name[cpu] = "Cavium Octeon";
1621 goto platform;
1622 case PRID_IMP_CAVIUM_CN58XX:
1623 case PRID_IMP_CAVIUM_CN56XX:
1624 case PRID_IMP_CAVIUM_CN50XX:
1625 case PRID_IMP_CAVIUM_CN52XX:
1626 c->cputype = CPU_CAVIUM_OCTEON_PLUS;
1627 __cpu_name[cpu] = "Cavium Octeon+";
1628 platform:
1629 set_elf_platform(cpu, "octeon");
1630 break;
1631 case PRID_IMP_CAVIUM_CN61XX:
1632 case PRID_IMP_CAVIUM_CN63XX:
1633 case PRID_IMP_CAVIUM_CN66XX:
1634 case PRID_IMP_CAVIUM_CN68XX:
1635 case PRID_IMP_CAVIUM_CNF71XX:
1636 c->cputype = CPU_CAVIUM_OCTEON2;
1637 __cpu_name[cpu] = "Cavium Octeon II";
1638 set_elf_platform(cpu, "octeon2");
1639 break;
1640 case PRID_IMP_CAVIUM_CN70XX:
1641 case PRID_IMP_CAVIUM_CN73XX:
1642 case PRID_IMP_CAVIUM_CNF75XX:
1643 case PRID_IMP_CAVIUM_CN78XX:
1644 c->cputype = CPU_CAVIUM_OCTEON3;
1645 __cpu_name[cpu] = "Cavium Octeon III";
1646 set_elf_platform(cpu, "octeon3");
1647 break;
1648 default:
1649 printk(KERN_INFO "Unknown Octeon chip!\n");
1650 c->cputype = CPU_UNKNOWN;
1651 break;
1652 }
1653 }
1654
1655 #ifdef CONFIG_CPU_LOONGSON64
1656 #include <loongson_regs.h>
1657
decode_cpucfg(struct cpuinfo_mips * c)1658 static inline void decode_cpucfg(struct cpuinfo_mips *c)
1659 {
1660 u32 cfg1 = read_cpucfg(LOONGSON_CFG1);
1661 u32 cfg2 = read_cpucfg(LOONGSON_CFG2);
1662 u32 cfg3 = read_cpucfg(LOONGSON_CFG3);
1663
1664 if (cfg1 & LOONGSON_CFG1_MMI)
1665 c->ases |= MIPS_ASE_LOONGSON_MMI;
1666
1667 if (cfg2 & LOONGSON_CFG2_LEXT1)
1668 c->ases |= MIPS_ASE_LOONGSON_EXT;
1669
1670 if (cfg2 & LOONGSON_CFG2_LEXT2)
1671 c->ases |= MIPS_ASE_LOONGSON_EXT2;
1672
1673 if (cfg2 & LOONGSON_CFG2_LSPW) {
1674 c->options |= MIPS_CPU_LDPTE;
1675 c->guest.options |= MIPS_CPU_LDPTE;
1676 }
1677
1678 if (cfg3 & LOONGSON_CFG3_LCAMP)
1679 c->ases |= MIPS_ASE_LOONGSON_CAM;
1680 }
1681
cpu_probe_loongson(struct cpuinfo_mips * c,unsigned int cpu)1682 static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu)
1683 {
1684 c->cputype = CPU_LOONGSON64;
1685
1686 /* All Loongson processors covered here define ExcCode 16 as GSExc. */
1687 decode_configs(c);
1688 c->options |= MIPS_CPU_GSEXCEX;
1689
1690 switch (c->processor_id & PRID_IMP_MASK) {
1691 case PRID_IMP_LOONGSON_64R: /* Loongson-64 Reduced */
1692 switch (c->processor_id & PRID_REV_MASK) {
1693 case PRID_REV_LOONGSON2K_R1_0:
1694 case PRID_REV_LOONGSON2K_R1_1:
1695 case PRID_REV_LOONGSON2K_R1_2:
1696 case PRID_REV_LOONGSON2K_R1_3:
1697 __cpu_name[cpu] = "Loongson-2K";
1698 set_elf_platform(cpu, "gs264e");
1699 set_isa(c, MIPS_CPU_ISA_M64R2);
1700 break;
1701 }
1702 c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_EXT |
1703 MIPS_ASE_LOONGSON_EXT2);
1704 break;
1705 case PRID_IMP_LOONGSON_64C: /* Loongson-3 Classic */
1706 switch (c->processor_id & PRID_REV_MASK) {
1707 case PRID_REV_LOONGSON3A_R2_0:
1708 case PRID_REV_LOONGSON3A_R2_1:
1709 __cpu_name[cpu] = "ICT Loongson-3";
1710 set_elf_platform(cpu, "loongson3a");
1711 set_isa(c, MIPS_CPU_ISA_M64R2);
1712 break;
1713 case PRID_REV_LOONGSON3A_R3_0:
1714 case PRID_REV_LOONGSON3A_R3_1:
1715 __cpu_name[cpu] = "ICT Loongson-3";
1716 set_elf_platform(cpu, "loongson3a");
1717 set_isa(c, MIPS_CPU_ISA_M64R2);
1718 break;
1719 }
1720 /*
1721 * Loongson-3 Classic did not implement MIPS standard TLBINV
1722 * but implemented TLBINVF and EHINV. As currently we're only
1723 * using these two features, enable MIPS_CPU_TLBINV as well.
1724 *
1725 * Also some early Loongson-3A2000 had wrong TLB type in Config
1726 * register, we correct it here.
1727 */
1728 c->options |= MIPS_CPU_FTLB | MIPS_CPU_TLBINV | MIPS_CPU_LDPTE;
1729 c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_CAM |
1730 MIPS_ASE_LOONGSON_EXT | MIPS_ASE_LOONGSON_EXT2);
1731 c->ases &= ~MIPS_ASE_VZ; /* VZ of Loongson-3A2000/3000 is incomplete */
1732 change_c0_config6(LOONGSON_CONF6_EXTIMER | LOONGSON_CONF6_INTIMER,
1733 LOONGSON_CONF6_INTIMER);
1734 break;
1735 case PRID_IMP_LOONGSON_64G:
1736 __cpu_name[cpu] = "ICT Loongson-3";
1737 set_elf_platform(cpu, "loongson3a");
1738 set_isa(c, MIPS_CPU_ISA_M64R2);
1739 decode_cpucfg(c);
1740 change_c0_config6(LOONGSON_CONF6_EXTIMER | LOONGSON_CONF6_INTIMER,
1741 LOONGSON_CONF6_INTIMER);
1742 break;
1743 default:
1744 panic("Unknown Loongson Processor ID!");
1745 break;
1746 }
1747 }
1748 #else
cpu_probe_loongson(struct cpuinfo_mips * c,unsigned int cpu)1749 static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu) { }
1750 #endif
1751
cpu_probe_ingenic(struct cpuinfo_mips * c,unsigned int cpu)1752 static inline void cpu_probe_ingenic(struct cpuinfo_mips *c, unsigned int cpu)
1753 {
1754 decode_configs(c);
1755
1756 /*
1757 * XBurst misses a config2 register, so config3 decode was skipped in
1758 * decode_configs().
1759 */
1760 decode_config3(c);
1761
1762 /* XBurst does not implement the CP0 counter. */
1763 c->options &= ~MIPS_CPU_COUNTER;
1764 BUG_ON(__builtin_constant_p(cpu_has_counter) && cpu_has_counter);
1765
1766 /* XBurst has virtually tagged icache */
1767 c->icache.flags |= MIPS_CACHE_VTAG;
1768
1769 switch (c->processor_id & PRID_IMP_MASK) {
1770
1771 /* XBurst®1 with MXU1.0/MXU1.1 SIMD ISA */
1772 case PRID_IMP_XBURST_REV1:
1773
1774 /*
1775 * The XBurst core by default attempts to avoid branch target
1776 * buffer lookups by detecting & special casing loops. This
1777 * feature will cause BogoMIPS and lpj calculate in error.
1778 * Set cp0 config7 bit 4 to disable this feature.
1779 */
1780 set_c0_config7(MIPS_CONF7_BTB_LOOP_EN);
1781
1782 switch (c->processor_id & PRID_COMP_MASK) {
1783
1784 /*
1785 * The config0 register in the XBurst CPUs with a processor ID of
1786 * PRID_COMP_INGENIC_D0 report themselves as MIPS32r2 compatible,
1787 * but they don't actually support this ISA.
1788 */
1789 case PRID_COMP_INGENIC_D0:
1790 c->isa_level &= ~MIPS_CPU_ISA_M32R2;
1791
1792 /* FPU is not properly detected on JZ4760(B). */
1793 if (c->processor_id == 0x2ed0024f)
1794 c->options |= MIPS_CPU_FPU;
1795
1796 fallthrough;
1797
1798 /*
1799 * The config0 register in the XBurst CPUs with a processor ID of
1800 * PRID_COMP_INGENIC_D0 or PRID_COMP_INGENIC_D1 has an abandoned
1801 * huge page tlb mode, this mode is not compatible with the MIPS
1802 * standard, it will cause tlbmiss and into an infinite loop
1803 * (line 21 in the tlb-funcs.S) when starting the init process.
1804 * After chip reset, the default is HPTLB mode, Write 0xa9000000
1805 * to cp0 register 5 sel 4 to switch back to VTLB mode to prevent
1806 * getting stuck.
1807 */
1808 case PRID_COMP_INGENIC_D1:
1809 write_c0_page_ctrl(XBURST_PAGECTRL_HPTLB_DIS);
1810 break;
1811
1812 default:
1813 break;
1814 }
1815 fallthrough;
1816
1817 /* XBurst®1 with MXU2.0 SIMD ISA */
1818 case PRID_IMP_XBURST_REV2:
1819 /* Ingenic uses the WA bit to achieve write-combine memory writes */
1820 c->writecombine = _CACHE_CACHABLE_WA;
1821 c->cputype = CPU_XBURST;
1822 __cpu_name[cpu] = "Ingenic XBurst";
1823 break;
1824
1825 /* XBurst®2 with MXU2.1 SIMD ISA */
1826 case PRID_IMP_XBURST2:
1827 c->cputype = CPU_XBURST;
1828 __cpu_name[cpu] = "Ingenic XBurst II";
1829 break;
1830
1831 default:
1832 panic("Unknown Ingenic Processor ID!");
1833 break;
1834 }
1835 }
1836
1837 #ifdef CONFIG_64BIT
1838 /* For use by uaccess.h */
1839 u64 __ua_limit;
1840 EXPORT_SYMBOL(__ua_limit);
1841 #endif
1842
1843 const char *__cpu_name[NR_CPUS];
1844 const char *__elf_platform;
1845 const char *__elf_base_platform;
1846
cpu_probe(void)1847 void cpu_probe(void)
1848 {
1849 struct cpuinfo_mips *c = ¤t_cpu_data;
1850 unsigned int cpu = smp_processor_id();
1851
1852 /*
1853 * Set a default elf platform, cpu probe may later
1854 * overwrite it with a more precise value
1855 */
1856 set_elf_platform(cpu, "mips");
1857
1858 c->processor_id = PRID_IMP_UNKNOWN;
1859 c->fpu_id = FPIR_IMP_NONE;
1860 c->cputype = CPU_UNKNOWN;
1861 c->writecombine = _CACHE_UNCACHED;
1862
1863 c->fpu_csr31 = FPU_CSR_RN;
1864 c->fpu_msk31 = FPU_CSR_RSVD | FPU_CSR_ABS2008 | FPU_CSR_NAN2008;
1865
1866 c->processor_id = read_c0_prid();
1867 switch (c->processor_id & PRID_COMP_MASK) {
1868 case PRID_COMP_LEGACY:
1869 cpu_probe_legacy(c, cpu);
1870 break;
1871 case PRID_COMP_MIPS:
1872 cpu_probe_mips(c, cpu);
1873 break;
1874 case PRID_COMP_ALCHEMY:
1875 case PRID_COMP_NETLOGIC:
1876 cpu_probe_alchemy(c, cpu);
1877 break;
1878 case PRID_COMP_SIBYTE:
1879 cpu_probe_sibyte(c, cpu);
1880 break;
1881 case PRID_COMP_BROADCOM:
1882 cpu_probe_broadcom(c, cpu);
1883 break;
1884 case PRID_COMP_SANDCRAFT:
1885 cpu_probe_sandcraft(c, cpu);
1886 break;
1887 case PRID_COMP_NXP:
1888 cpu_probe_nxp(c, cpu);
1889 break;
1890 case PRID_COMP_CAVIUM:
1891 cpu_probe_cavium(c, cpu);
1892 break;
1893 case PRID_COMP_LOONGSON:
1894 cpu_probe_loongson(c, cpu);
1895 break;
1896 case PRID_COMP_INGENIC_13:
1897 case PRID_COMP_INGENIC_D0:
1898 case PRID_COMP_INGENIC_D1:
1899 case PRID_COMP_INGENIC_E1:
1900 cpu_probe_ingenic(c, cpu);
1901 break;
1902 }
1903
1904 BUG_ON(!__cpu_name[cpu]);
1905 BUG_ON(c->cputype == CPU_UNKNOWN);
1906
1907 /*
1908 * Platform code can force the cpu type to optimize code
1909 * generation. In that case be sure the cpu type is correctly
1910 * manually setup otherwise it could trigger some nasty bugs.
1911 */
1912 BUG_ON(current_cpu_type() != c->cputype);
1913
1914 if (cpu_has_rixi) {
1915 /* Enable the RIXI exceptions */
1916 set_c0_pagegrain(PG_IEC);
1917 back_to_back_c0_hazard();
1918 /* Verify the IEC bit is set */
1919 if (read_c0_pagegrain() & PG_IEC)
1920 c->options |= MIPS_CPU_RIXIEX;
1921 }
1922
1923 if (mips_fpu_disabled)
1924 c->options &= ~MIPS_CPU_FPU;
1925
1926 if (mips_dsp_disabled)
1927 c->ases &= ~(MIPS_ASE_DSP | MIPS_ASE_DSP2P);
1928
1929 if (mips_htw_disabled) {
1930 c->options &= ~MIPS_CPU_HTW;
1931 write_c0_pwctl(read_c0_pwctl() &
1932 ~(1 << MIPS_PWCTL_PWEN_SHIFT));
1933 }
1934
1935 if (c->options & MIPS_CPU_FPU)
1936 cpu_set_fpu_opts(c);
1937 else
1938 cpu_set_nofpu_opts(c);
1939
1940 if (cpu_has_mips_r2_r6) {
1941 c->srsets = ((read_c0_srsctl() >> 26) & 0x0f) + 1;
1942 /* R2 has Performance Counter Interrupt indicator */
1943 c->options |= MIPS_CPU_PCI;
1944 }
1945 else
1946 c->srsets = 1;
1947
1948 if (cpu_has_mips_r6)
1949 elf_hwcap |= HWCAP_MIPS_R6;
1950
1951 if (cpu_has_msa) {
1952 c->msa_id = cpu_get_msa_id();
1953 WARN(c->msa_id & MSA_IR_WRPF,
1954 "Vector register partitioning unimplemented!");
1955 elf_hwcap |= HWCAP_MIPS_MSA;
1956 }
1957
1958 if (cpu_has_mips16)
1959 elf_hwcap |= HWCAP_MIPS_MIPS16;
1960
1961 if (cpu_has_mdmx)
1962 elf_hwcap |= HWCAP_MIPS_MDMX;
1963
1964 if (cpu_has_mips3d)
1965 elf_hwcap |= HWCAP_MIPS_MIPS3D;
1966
1967 if (cpu_has_smartmips)
1968 elf_hwcap |= HWCAP_MIPS_SMARTMIPS;
1969
1970 if (cpu_has_dsp)
1971 elf_hwcap |= HWCAP_MIPS_DSP;
1972
1973 if (cpu_has_dsp2)
1974 elf_hwcap |= HWCAP_MIPS_DSP2;
1975
1976 if (cpu_has_dsp3)
1977 elf_hwcap |= HWCAP_MIPS_DSP3;
1978
1979 if (cpu_has_mips16e2)
1980 elf_hwcap |= HWCAP_MIPS_MIPS16E2;
1981
1982 if (cpu_has_loongson_mmi)
1983 elf_hwcap |= HWCAP_LOONGSON_MMI;
1984
1985 if (cpu_has_loongson_ext)
1986 elf_hwcap |= HWCAP_LOONGSON_EXT;
1987
1988 if (cpu_has_loongson_ext2)
1989 elf_hwcap |= HWCAP_LOONGSON_EXT2;
1990
1991 if (cpu_has_vz)
1992 cpu_probe_vz(c);
1993
1994 cpu_probe_vmbits(c);
1995
1996 /* Synthesize CPUCFG data if running on Loongson processors;
1997 * no-op otherwise.
1998 *
1999 * This looks at previously probed features, so keep this at bottom.
2000 */
2001 loongson3_cpucfg_synthesize_data(c);
2002
2003 #ifdef CONFIG_64BIT
2004 if (cpu == 0)
2005 __ua_limit = ~((1ull << cpu_vmbits) - 1);
2006 #endif
2007
2008 reserve_exception_space(0, 0x1000);
2009 }
2010
cpu_report(void)2011 void cpu_report(void)
2012 {
2013 struct cpuinfo_mips *c = ¤t_cpu_data;
2014
2015 pr_info("CPU%d revision is: %08x (%s)\n",
2016 smp_processor_id(), c->processor_id, cpu_name_string());
2017 if (c->options & MIPS_CPU_FPU)
2018 printk(KERN_INFO "FPU revision is: %08x\n", c->fpu_id);
2019 if (cpu_has_msa)
2020 pr_info("MSA revision is: %08x\n", c->msa_id);
2021 }
2022
cpu_set_cluster(struct cpuinfo_mips * cpuinfo,unsigned int cluster)2023 void cpu_set_cluster(struct cpuinfo_mips *cpuinfo, unsigned int cluster)
2024 {
2025 /* Ensure the core number fits in the field */
2026 WARN_ON(cluster > (MIPS_GLOBALNUMBER_CLUSTER >>
2027 MIPS_GLOBALNUMBER_CLUSTER_SHF));
2028
2029 cpuinfo->globalnumber &= ~MIPS_GLOBALNUMBER_CLUSTER;
2030 cpuinfo->globalnumber |= cluster << MIPS_GLOBALNUMBER_CLUSTER_SHF;
2031 }
2032
cpu_set_core(struct cpuinfo_mips * cpuinfo,unsigned int core)2033 void cpu_set_core(struct cpuinfo_mips *cpuinfo, unsigned int core)
2034 {
2035 /* Ensure the core number fits in the field */
2036 WARN_ON(core > (MIPS_GLOBALNUMBER_CORE >> MIPS_GLOBALNUMBER_CORE_SHF));
2037
2038 cpuinfo->globalnumber &= ~MIPS_GLOBALNUMBER_CORE;
2039 cpuinfo->globalnumber |= core << MIPS_GLOBALNUMBER_CORE_SHF;
2040 }
2041
cpu_set_vpe_id(struct cpuinfo_mips * cpuinfo,unsigned int vpe)2042 void cpu_set_vpe_id(struct cpuinfo_mips *cpuinfo, unsigned int vpe)
2043 {
2044 /* Ensure the VP(E) ID fits in the field */
2045 WARN_ON(vpe > (MIPS_GLOBALNUMBER_VP >> MIPS_GLOBALNUMBER_VP_SHF));
2046
2047 /* Ensure we're not using VP(E)s without support */
2048 WARN_ON(vpe && !IS_ENABLED(CONFIG_MIPS_MT_SMP) &&
2049 !IS_ENABLED(CONFIG_CPU_MIPSR6));
2050
2051 cpuinfo->globalnumber &= ~MIPS_GLOBALNUMBER_VP;
2052 cpuinfo->globalnumber |= vpe << MIPS_GLOBALNUMBER_VP_SHF;
2053 }
2054
cpu_disable_mmid(void)2055 void cpu_disable_mmid(void)
2056 {
2057 int i;
2058 unsigned long asid_mask;
2059 unsigned int cpu = smp_processor_id();
2060 struct cpuinfo_mips *c = ¤t_cpu_data;
2061 unsigned int config4 = read_c0_config4();
2062 unsigned int config5 = read_c0_config5();
2063
2064 /* Setup the initial ASID mask based on config4 */
2065 asid_mask = MIPS_ENTRYHI_ASID;
2066 if (config4 & MIPS_CONF4_AE)
2067 asid_mask |= MIPS_ENTRYHI_ASIDX;
2068 set_cpu_asid_mask(c, asid_mask);
2069
2070 /* Disable MMID in the C0 and update cpuinfo_mips accordingly */
2071 config5 &= ~(MIPS_CONF5_UFR | MIPS_CONF5_UFE);
2072 config5 &= ~MIPS_CONF5_MI;
2073 write_c0_config5(config5);
2074 /* Ensure the write to config5 above takes effect */
2075 back_to_back_c0_hazard();
2076 c->options &= ~MIPS_CPU_MMID;
2077
2078 /* Setup asid cache value cleared in per_cpu_trap_init() */
2079 cpu_data[cpu].asid_cache = asid_first_version(cpu);
2080
2081 /* Reinit context for each CPU */
2082 for_each_possible_cpu(i)
2083 set_cpu_context(i, &init_mm, 0);
2084
2085 /* Ensure that now MMID will be seen as disable */
2086 mmid_disabled_quirk = true;
2087
2088 pr_info("MMID support disabled due to hardware support issue\n");
2089 }
2090