1 /*
2 em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB
3 video capture devices
4
5 Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
6 Markus Rechberger <mrechberger@gmail.com>
7 Mauro Carvalho Chehab <mchehab@infradead.org>
8 Sascha Sommer <saschasommer@freenet.de>
9
10 This program is free software; you can redistribute it and/or modify
11 it under the terms of the GNU General Public License as published by
12 the Free Software Foundation; either version 2 of the License, or
13 (at your option) any later version.
14
15 This program is distributed in the hope that it will be useful,
16 but WITHOUT ANY WARRANTY; without even the implied warranty of
17 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 GNU General Public License for more details.
19
20 You should have received a copy of the GNU General Public License
21 along with this program; if not, write to the Free Software
22 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
23 */
24
25 #include <linux/init.h>
26 #include <linux/module.h>
27 #include <linux/slab.h>
28 #include <linux/delay.h>
29 #include <linux/i2c.h>
30 #include <linux/usb.h>
31 #include <media/tuner.h>
32 #include <media/msp3400.h>
33 #include <media/saa7115.h>
34 #include <media/tvp5150.h>
35 #include <media/tvaudio.h>
36 #include <media/mt9v011.h>
37 #include <media/i2c-addr.h>
38 #include <media/tveeprom.h>
39 #include <media/v4l2-common.h>
40 #include <media/v4l2-chip-ident.h>
41
42 #include "em28xx.h"
43
44 #define DRIVER_NAME "em28xx"
45
46 static int tuner = -1;
47 module_param(tuner, int, 0444);
48 MODULE_PARM_DESC(tuner, "tuner type");
49
50 static unsigned int disable_ir;
51 module_param(disable_ir, int, 0444);
52 MODULE_PARM_DESC(disable_ir, "disable infrared remote support");
53
54 static unsigned int disable_usb_speed_check;
55 module_param(disable_usb_speed_check, int, 0444);
56 MODULE_PARM_DESC(disable_usb_speed_check,
57 "override min bandwidth requirement of 480M bps");
58
59 static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET };
60 module_param_array(card, int, NULL, 0444);
61 MODULE_PARM_DESC(card, "card type");
62
63 /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS - 1 */
64 static unsigned long em28xx_devused;
65
66 struct em28xx_hash_table {
67 unsigned long hash;
68 unsigned int model;
69 unsigned int tuner;
70 };
71
72 /*
73 * Reset sequences for analog/digital modes
74 */
75
76 /* Reset for the most [analog] boards */
77 static struct em28xx_reg_seq default_analog[] = {
78 {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
79 { -1, -1, -1, -1},
80 };
81
82 /* Reset for the most [digital] boards */
83 static struct em28xx_reg_seq default_digital[] = {
84 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
85 { -1, -1, -1, -1},
86 };
87
88 /* Board Hauppauge WinTV HVR 900 analog */
89 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
90 {EM28XX_R08_GPIO, 0x2d, ~EM_GPIO_4, 10},
91 {0x05, 0xff, 0x10, 10},
92 { -1, -1, -1, -1},
93 };
94
95 /* Board Hauppauge WinTV HVR 900 digital */
96 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
97 {EM28XX_R08_GPIO, 0x2e, ~EM_GPIO_4, 10},
98 {EM2880_R04_GPO, 0x04, 0x0f, 10},
99 {EM2880_R04_GPO, 0x0c, 0x0f, 10},
100 { -1, -1, -1, -1},
101 };
102
103 /* Board Hauppauge WinTV HVR 900 (R2) digital */
104 static struct em28xx_reg_seq hauppauge_wintv_hvr_900R2_digital[] = {
105 {EM28XX_R08_GPIO, 0x2e, ~EM_GPIO_4, 10},
106 {EM2880_R04_GPO, 0x0c, 0x0f, 10},
107 { -1, -1, -1, -1},
108 };
109
110 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
111 static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
112 {EM28XX_R08_GPIO, 0x69, ~EM_GPIO_4, 10},
113 { -1, -1, -1, -1},
114 };
115
116 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
117
118 /* Board - EM2870 Kworld 355u
119 Analog - No input analog */
120
121 /* Board - EM2882 Kworld 315U digital */
122 static struct em28xx_reg_seq em2882_kworld_315u_digital[] = {
123 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
124 {EM28XX_R08_GPIO, 0xfe, 0xff, 10},
125 {EM2880_R04_GPO, 0x04, 0xff, 10},
126 {EM2880_R04_GPO, 0x0c, 0xff, 10},
127 {EM28XX_R08_GPIO, 0x7e, 0xff, 10},
128 { -1, -1, -1, -1},
129 };
130
131 static struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = {
132 {EM2880_R04_GPO, 0x08, 0xff, 10},
133 {EM2880_R04_GPO, 0x0c, 0xff, 10},
134 {EM2880_R04_GPO, 0x08, 0xff, 10},
135 {EM2880_R04_GPO, 0x0c, 0xff, 10},
136 { -1, -1, -1, -1},
137 };
138
139 static struct em28xx_reg_seq kworld_330u_analog[] = {
140 {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
141 {EM2880_R04_GPO, 0x00, 0xff, 10},
142 { -1, -1, -1, -1},
143 };
144
145 static struct em28xx_reg_seq kworld_330u_digital[] = {
146 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
147 {EM2880_R04_GPO, 0x08, 0xff, 10},
148 { -1, -1, -1, -1},
149 };
150
151 /* Evga inDtube
152 GPIO0 - Enable digital power (s5h1409) - low to enable
153 GPIO1 - Enable analog power (tvp5150/emp202) - low to enable
154 GPIO4 - xc3028 reset
155 GOP3 - s5h1409 reset
156 */
157 static struct em28xx_reg_seq evga_indtube_analog[] = {
158 {EM28XX_R08_GPIO, 0x79, 0xff, 60},
159 { -1, -1, -1, -1},
160 };
161
162 static struct em28xx_reg_seq evga_indtube_digital[] = {
163 {EM28XX_R08_GPIO, 0x7a, 0xff, 1},
164 {EM2880_R04_GPO, 0x04, 0xff, 10},
165 {EM2880_R04_GPO, 0x0c, 0xff, 1},
166 { -1, -1, -1, -1},
167 };
168
169 /*
170 * KWorld PlusTV 340U and UB435-Q (ATSC) GPIOs map:
171 * EM_GPIO_0 - currently unknown
172 * EM_GPIO_1 - LED disable/enable (1 = off, 0 = on)
173 * EM_GPIO_2 - currently unknown
174 * EM_GPIO_3 - currently unknown
175 * EM_GPIO_4 - TDA18271HD/C1 tuner (1 = active, 0 = in reset)
176 * EM_GPIO_5 - LGDT3304 ATSC/QAM demod (1 = active, 0 = in reset)
177 * EM_GPIO_6 - currently unknown
178 * EM_GPIO_7 - currently unknown
179 */
180 static struct em28xx_reg_seq kworld_a340_digital[] = {
181 {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
182 { -1, -1, -1, -1},
183 };
184
185 /* Pinnacle Hybrid Pro eb1a:2881 */
186 static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = {
187 {EM28XX_R08_GPIO, 0xfd, ~EM_GPIO_4, 10},
188 { -1, -1, -1, -1},
189 };
190
191 static struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = {
192 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
193 {EM2880_R04_GPO, 0x04, 0xff, 100},/* zl10353 reset */
194 {EM2880_R04_GPO, 0x0c, 0xff, 1},
195 { -1, -1, -1, -1},
196 };
197
198 static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_analog[] = {
199 {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
200 {EM2880_R04_GPO, 0x00, 0xff, 10},
201 { -1, -1, -1, -1},
202 };
203
204 static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_digital[] = {
205 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
206 {EM2880_R04_GPO, 0x08, 0xff, 10},
207 { -1, -1, -1, -1},
208 };
209
210 /* eb1a:2868 Reddo DVB-C USB TV Box
211 GPIO4 - CU1216L NIM
212 Other GPIOs seems to be don't care. */
213 static struct em28xx_reg_seq reddo_dvb_c_usb_box[] = {
214 {EM28XX_R08_GPIO, 0xfe, 0xff, 10},
215 {EM28XX_R08_GPIO, 0xde, 0xff, 10},
216 {EM28XX_R08_GPIO, 0xfe, 0xff, 10},
217 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
218 {EM28XX_R08_GPIO, 0x7f, 0xff, 10},
219 {EM28XX_R08_GPIO, 0x6f, 0xff, 10},
220 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
221 {-1, -1, -1, -1},
222 };
223
224 /* Callback for the most boards */
225 static struct em28xx_reg_seq default_tuner_gpio[] = {
226 {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10},
227 {EM28XX_R08_GPIO, 0, EM_GPIO_4, 10},
228 {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10},
229 { -1, -1, -1, -1},
230 };
231
232 /* Mute/unmute */
233 static struct em28xx_reg_seq compro_unmute_tv_gpio[] = {
234 {EM28XX_R08_GPIO, 5, 7, 10},
235 { -1, -1, -1, -1},
236 };
237
238 static struct em28xx_reg_seq compro_unmute_svid_gpio[] = {
239 {EM28XX_R08_GPIO, 4, 7, 10},
240 { -1, -1, -1, -1},
241 };
242
243 static struct em28xx_reg_seq compro_mute_gpio[] = {
244 {EM28XX_R08_GPIO, 6, 7, 10},
245 { -1, -1, -1, -1},
246 };
247
248 /* Terratec AV350 */
249 static struct em28xx_reg_seq terratec_av350_mute_gpio[] = {
250 {EM28XX_R08_GPIO, 0xff, 0x7f, 10},
251 { -1, -1, -1, -1},
252 };
253
254 static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = {
255 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
256 { -1, -1, -1, -1},
257 };
258
259 static struct em28xx_reg_seq silvercrest_reg_seq[] = {
260 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
261 {EM28XX_R08_GPIO, 0x01, 0xf7, 10},
262 { -1, -1, -1, -1},
263 };
264
265 static struct em28xx_reg_seq vc211a_enable[] = {
266 {EM28XX_R08_GPIO, 0xff, 0x07, 10},
267 {EM28XX_R08_GPIO, 0xff, 0x0f, 10},
268 {EM28XX_R08_GPIO, 0xff, 0x0b, 10},
269 { -1, -1, -1, -1},
270 };
271
272 static struct em28xx_reg_seq dikom_dk300_digital[] = {
273 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
274 {EM2880_R04_GPO, 0x08, 0xff, 10},
275 { -1, -1, -1, -1},
276 };
277
278
279 /* Reset for the most [digital] boards */
280 static struct em28xx_reg_seq leadership_digital[] = {
281 {EM2874_R80_GPIO, 0x70, 0xff, 10},
282 { -1, -1, -1, -1},
283 };
284
285 static struct em28xx_reg_seq leadership_reset[] = {
286 {EM2874_R80_GPIO, 0xf0, 0xff, 10},
287 {EM2874_R80_GPIO, 0xb0, 0xff, 10},
288 {EM2874_R80_GPIO, 0xf0, 0xff, 10},
289 { -1, -1, -1, -1},
290 };
291
292 /* 2013:024f PCTV nanoStick T2 290e
293 * GPIO_6 - demod reset
294 * GPIO_7 - LED
295 */
296 static struct em28xx_reg_seq pctv_290e[] = {
297 {EM2874_R80_GPIO, 0x00, 0xff, 80},
298 {EM2874_R80_GPIO, 0x40, 0xff, 80}, /* GPIO_6 = 1 */
299 {EM2874_R80_GPIO, 0xc0, 0xff, 80}, /* GPIO_7 = 1 */
300 {-1, -1, -1, -1},
301 };
302
303 #if 0
304 static struct em28xx_reg_seq terratec_h5_gpio[] = {
305 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
306 {EM2874_R80_GPIO, 0xf6, 0xff, 100},
307 {EM2874_R80_GPIO, 0xf2, 0xff, 50},
308 {EM2874_R80_GPIO, 0xf6, 0xff, 50},
309 { -1, -1, -1, -1},
310 };
311
312 static struct em28xx_reg_seq terratec_h5_digital[] = {
313 {EM2874_R80_GPIO, 0xf6, 0xff, 10},
314 {EM2874_R80_GPIO, 0xe6, 0xff, 100},
315 {EM2874_R80_GPIO, 0xa6, 0xff, 10},
316 { -1, -1, -1, -1},
317 };
318 #endif
319
320 /* 2013:024f PCTV DVB-S2 Stick 460e
321 * GPIO_0 - POWER_ON
322 * GPIO_1 - BOOST
323 * GPIO_2 - VUV_LNB (red LED)
324 * GPIO_3 - EXT_12V
325 * GPIO_4 - INT_DEM (DEMOD GPIO_0)
326 * GPIO_5 - INT_LNB
327 * GPIO_6 - RESET_DEM
328 * GPIO_7 - LED (green LED)
329 */
330 static struct em28xx_reg_seq pctv_460e[] = {
331 {EM2874_R80_GPIO, 0x01, 0xff, 50},
332 {0x0d, 0xff, 0xff, 50},
333 {EM2874_R80_GPIO, 0x41, 0xff, 50}, /* GPIO_6=1 */
334 {0x0d, 0x42, 0xff, 50},
335 {EM2874_R80_GPIO, 0x61, 0xff, 50}, /* GPIO_5=1 */
336 { -1, -1, -1, -1},
337 };
338
339 #if 0
340 static struct em28xx_reg_seq hauppauge_930c_gpio[] = {
341 {EM2874_R80_GPIO, 0x6f, 0xff, 10},
342 {EM2874_R80_GPIO, 0x4f, 0xff, 10}, /* xc5000 reset */
343 {EM2874_R80_GPIO, 0x6f, 0xff, 10},
344 {EM2874_R80_GPIO, 0x4f, 0xff, 10},
345 { -1, -1, -1, -1},
346 };
347
348 static struct em28xx_reg_seq hauppauge_930c_digital[] = {
349 {EM2874_R80_GPIO, 0xf6, 0xff, 10},
350 {EM2874_R80_GPIO, 0xe6, 0xff, 100},
351 {EM2874_R80_GPIO, 0xa6, 0xff, 10},
352 { -1, -1, -1, -1},
353 };
354 #endif
355
356 /*
357 * Board definitions
358 */
359 struct em28xx_board em28xx_boards[] = {
360 [EM2750_BOARD_UNKNOWN] = {
361 .name = "EM2710/EM2750/EM2751 webcam grabber",
362 .xclk = EM28XX_XCLK_FREQUENCY_20MHZ,
363 .tuner_type = TUNER_ABSENT,
364 .is_webcam = 1,
365 .input = { {
366 .type = EM28XX_VMUX_COMPOSITE1,
367 .vmux = 0,
368 .amux = EM28XX_AMUX_VIDEO,
369 .gpio = silvercrest_reg_seq,
370 } },
371 },
372 [EM2800_BOARD_UNKNOWN] = {
373 .name = "Unknown EM2800 video grabber",
374 .is_em2800 = 1,
375 .tda9887_conf = TDA9887_PRESENT,
376 .decoder = EM28XX_SAA711X,
377 .tuner_type = TUNER_ABSENT,
378 .input = { {
379 .type = EM28XX_VMUX_COMPOSITE1,
380 .vmux = SAA7115_COMPOSITE0,
381 .amux = EM28XX_AMUX_LINE_IN,
382 }, {
383 .type = EM28XX_VMUX_SVIDEO,
384 .vmux = SAA7115_SVIDEO3,
385 .amux = EM28XX_AMUX_LINE_IN,
386 } },
387 },
388 [EM2820_BOARD_UNKNOWN] = {
389 .name = "Unknown EM2750/28xx video grabber",
390 .tuner_type = TUNER_ABSENT,
391 .is_webcam = 1, /* To enable sensor probe */
392 },
393 [EM2750_BOARD_DLCW_130] = {
394 /* Beijing Huaqi Information Digital Technology Co., Ltd */
395 .name = "Huaqi DLCW-130",
396 .valid = EM28XX_BOARD_NOT_VALIDATED,
397 .xclk = EM28XX_XCLK_FREQUENCY_48MHZ,
398 .tuner_type = TUNER_ABSENT,
399 .is_webcam = 1,
400 .input = { {
401 .type = EM28XX_VMUX_COMPOSITE1,
402 .vmux = 0,
403 .amux = EM28XX_AMUX_VIDEO,
404 } },
405 },
406 [EM2820_BOARD_KWORLD_PVRTV2800RF] = {
407 .name = "Kworld PVR TV 2800 RF",
408 .tuner_type = TUNER_TEMIC_PAL,
409 .tda9887_conf = TDA9887_PRESENT,
410 .decoder = EM28XX_SAA711X,
411 .input = { {
412 .type = EM28XX_VMUX_COMPOSITE1,
413 .vmux = SAA7115_COMPOSITE0,
414 .amux = EM28XX_AMUX_LINE_IN,
415 }, {
416 .type = EM28XX_VMUX_SVIDEO,
417 .vmux = SAA7115_SVIDEO3,
418 .amux = EM28XX_AMUX_LINE_IN,
419 } },
420 },
421 [EM2820_BOARD_GADMEI_TVR200] = {
422 .name = "Gadmei TVR200",
423 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
424 .tda9887_conf = TDA9887_PRESENT,
425 .decoder = EM28XX_SAA711X,
426 .input = { {
427 .type = EM28XX_VMUX_TELEVISION,
428 .vmux = SAA7115_COMPOSITE2,
429 .amux = EM28XX_AMUX_LINE_IN,
430 }, {
431 .type = EM28XX_VMUX_COMPOSITE1,
432 .vmux = SAA7115_COMPOSITE0,
433 .amux = EM28XX_AMUX_LINE_IN,
434 }, {
435 .type = EM28XX_VMUX_SVIDEO,
436 .vmux = SAA7115_SVIDEO3,
437 .amux = EM28XX_AMUX_LINE_IN,
438 } },
439 },
440 [EM2820_BOARD_TERRATEC_CINERGY_250] = {
441 .name = "Terratec Cinergy 250 USB",
442 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
443 .has_ir_i2c = 1,
444 .tda9887_conf = TDA9887_PRESENT,
445 .decoder = EM28XX_SAA711X,
446 .input = { {
447 .type = EM28XX_VMUX_TELEVISION,
448 .vmux = SAA7115_COMPOSITE2,
449 .amux = EM28XX_AMUX_LINE_IN,
450 }, {
451 .type = EM28XX_VMUX_COMPOSITE1,
452 .vmux = SAA7115_COMPOSITE0,
453 .amux = EM28XX_AMUX_LINE_IN,
454 }, {
455 .type = EM28XX_VMUX_SVIDEO,
456 .vmux = SAA7115_SVIDEO3,
457 .amux = EM28XX_AMUX_LINE_IN,
458 } },
459 },
460 [EM2820_BOARD_PINNACLE_USB_2] = {
461 .name = "Pinnacle PCTV USB 2",
462 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
463 .has_ir_i2c = 1,
464 .tda9887_conf = TDA9887_PRESENT,
465 .decoder = EM28XX_SAA711X,
466 .input = { {
467 .type = EM28XX_VMUX_TELEVISION,
468 .vmux = SAA7115_COMPOSITE2,
469 .amux = EM28XX_AMUX_VIDEO,
470 }, {
471 .type = EM28XX_VMUX_COMPOSITE1,
472 .vmux = SAA7115_COMPOSITE0,
473 .amux = EM28XX_AMUX_LINE_IN,
474 }, {
475 .type = EM28XX_VMUX_SVIDEO,
476 .vmux = SAA7115_SVIDEO3,
477 .amux = EM28XX_AMUX_LINE_IN,
478 } },
479 },
480 [EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = {
481 .name = "Hauppauge WinTV USB 2",
482 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
483 .tda9887_conf = TDA9887_PRESENT |
484 TDA9887_PORT1_ACTIVE |
485 TDA9887_PORT2_ACTIVE,
486 .decoder = EM28XX_TVP5150,
487 .has_msp34xx = 1,
488 .has_ir_i2c = 1,
489 .input = { {
490 .type = EM28XX_VMUX_TELEVISION,
491 .vmux = TVP5150_COMPOSITE0,
492 .amux = MSP_INPUT_DEFAULT,
493 }, {
494 .type = EM28XX_VMUX_SVIDEO,
495 .vmux = TVP5150_SVIDEO,
496 .amux = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1,
497 MSP_DSP_IN_SCART, MSP_DSP_IN_SCART),
498 } },
499 },
500 [EM2820_BOARD_DLINK_USB_TV] = {
501 .name = "D-Link DUB-T210 TV Tuner",
502 .valid = EM28XX_BOARD_NOT_VALIDATED,
503 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
504 .tda9887_conf = TDA9887_PRESENT,
505 .decoder = EM28XX_SAA711X,
506 .input = { {
507 .type = EM28XX_VMUX_TELEVISION,
508 .vmux = SAA7115_COMPOSITE2,
509 .amux = EM28XX_AMUX_LINE_IN,
510 }, {
511 .type = EM28XX_VMUX_COMPOSITE1,
512 .vmux = SAA7115_COMPOSITE0,
513 .amux = EM28XX_AMUX_LINE_IN,
514 }, {
515 .type = EM28XX_VMUX_SVIDEO,
516 .vmux = SAA7115_SVIDEO3,
517 .amux = EM28XX_AMUX_LINE_IN,
518 } },
519 },
520 [EM2820_BOARD_HERCULES_SMART_TV_USB2] = {
521 .name = "Hercules Smart TV USB 2.0",
522 .valid = EM28XX_BOARD_NOT_VALIDATED,
523 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
524 .tda9887_conf = TDA9887_PRESENT,
525 .decoder = EM28XX_SAA711X,
526 .input = { {
527 .type = EM28XX_VMUX_TELEVISION,
528 .vmux = SAA7115_COMPOSITE2,
529 .amux = EM28XX_AMUX_LINE_IN,
530 }, {
531 .type = EM28XX_VMUX_COMPOSITE1,
532 .vmux = SAA7115_COMPOSITE0,
533 .amux = EM28XX_AMUX_LINE_IN,
534 }, {
535 .type = EM28XX_VMUX_SVIDEO,
536 .vmux = SAA7115_SVIDEO3,
537 .amux = EM28XX_AMUX_LINE_IN,
538 } },
539 },
540 [EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = {
541 .name = "Pinnacle PCTV USB 2 (Philips FM1216ME)",
542 .valid = EM28XX_BOARD_NOT_VALIDATED,
543 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
544 .tda9887_conf = TDA9887_PRESENT,
545 .decoder = EM28XX_SAA711X,
546 .input = { {
547 .type = EM28XX_VMUX_TELEVISION,
548 .vmux = SAA7115_COMPOSITE2,
549 .amux = EM28XX_AMUX_VIDEO,
550 }, {
551 .type = EM28XX_VMUX_COMPOSITE1,
552 .vmux = SAA7115_COMPOSITE0,
553 .amux = EM28XX_AMUX_LINE_IN,
554 }, {
555 .type = EM28XX_VMUX_SVIDEO,
556 .vmux = SAA7115_SVIDEO3,
557 .amux = EM28XX_AMUX_LINE_IN,
558 } },
559 },
560 [EM2820_BOARD_GADMEI_UTV310] = {
561 .name = "Gadmei UTV310",
562 .valid = EM28XX_BOARD_NOT_VALIDATED,
563 .tuner_type = TUNER_TNF_5335MF,
564 .tda9887_conf = TDA9887_PRESENT,
565 .decoder = EM28XX_SAA711X,
566 .input = { {
567 .type = EM28XX_VMUX_TELEVISION,
568 .vmux = SAA7115_COMPOSITE1,
569 .amux = EM28XX_AMUX_LINE_IN,
570 }, {
571 .type = EM28XX_VMUX_COMPOSITE1,
572 .vmux = SAA7115_COMPOSITE0,
573 .amux = EM28XX_AMUX_LINE_IN,
574 }, {
575 .type = EM28XX_VMUX_SVIDEO,
576 .vmux = SAA7115_SVIDEO3,
577 .amux = EM28XX_AMUX_LINE_IN,
578 } },
579 },
580 [EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = {
581 .name = "Leadtek Winfast USB II Deluxe",
582 .valid = EM28XX_BOARD_NOT_VALIDATED,
583 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
584 .has_ir_i2c = 1,
585 .tvaudio_addr = 0x58,
586 .tda9887_conf = TDA9887_PRESENT |
587 TDA9887_PORT2_ACTIVE |
588 TDA9887_QSS,
589 .decoder = EM28XX_SAA711X,
590 .adecoder = EM28XX_TVAUDIO,
591 .input = { {
592 .type = EM28XX_VMUX_TELEVISION,
593 .vmux = SAA7115_COMPOSITE4,
594 .amux = EM28XX_AMUX_AUX,
595 }, {
596 .type = EM28XX_VMUX_COMPOSITE1,
597 .vmux = SAA7115_COMPOSITE5,
598 .amux = EM28XX_AMUX_LINE_IN,
599 }, {
600 .type = EM28XX_VMUX_SVIDEO,
601 .vmux = SAA7115_SVIDEO3,
602 .amux = EM28XX_AMUX_LINE_IN,
603 } },
604 .radio = {
605 .type = EM28XX_RADIO,
606 .amux = EM28XX_AMUX_AUX,
607 }
608 },
609 [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = {
610 .name = "Videology 20K14XUSB USB2.0",
611 .valid = EM28XX_BOARD_NOT_VALIDATED,
612 .tuner_type = TUNER_ABSENT,
613 .is_webcam = 1,
614 .input = { {
615 .type = EM28XX_VMUX_COMPOSITE1,
616 .vmux = 0,
617 .amux = EM28XX_AMUX_VIDEO,
618 } },
619 },
620 [EM2820_BOARD_SILVERCREST_WEBCAM] = {
621 .name = "Silvercrest Webcam 1.3mpix",
622 .tuner_type = TUNER_ABSENT,
623 .is_webcam = 1,
624 .input = { {
625 .type = EM28XX_VMUX_COMPOSITE1,
626 .vmux = 0,
627 .amux = EM28XX_AMUX_VIDEO,
628 .gpio = silvercrest_reg_seq,
629 } },
630 },
631 [EM2821_BOARD_SUPERCOMP_USB_2] = {
632 .name = "Supercomp USB 2.0 TV",
633 .valid = EM28XX_BOARD_NOT_VALIDATED,
634 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
635 .tda9887_conf = TDA9887_PRESENT |
636 TDA9887_PORT1_ACTIVE |
637 TDA9887_PORT2_ACTIVE,
638 .decoder = EM28XX_SAA711X,
639 .input = { {
640 .type = EM28XX_VMUX_TELEVISION,
641 .vmux = SAA7115_COMPOSITE2,
642 .amux = EM28XX_AMUX_LINE_IN,
643 }, {
644 .type = EM28XX_VMUX_COMPOSITE1,
645 .vmux = SAA7115_COMPOSITE0,
646 .amux = EM28XX_AMUX_VIDEO,
647 }, {
648 .type = EM28XX_VMUX_SVIDEO,
649 .vmux = SAA7115_SVIDEO3,
650 .amux = EM28XX_AMUX_LINE_IN,
651 } },
652 },
653 [EM2821_BOARD_USBGEAR_VD204] = {
654 .name = "Usbgear VD204v9",
655 .valid = EM28XX_BOARD_NOT_VALIDATED,
656 .tuner_type = TUNER_ABSENT, /* Capture only device */
657 .decoder = EM28XX_SAA711X,
658 .input = { {
659 .type = EM28XX_VMUX_COMPOSITE1,
660 .vmux = SAA7115_COMPOSITE0,
661 .amux = EM28XX_AMUX_LINE_IN,
662 }, {
663 .type = EM28XX_VMUX_SVIDEO,
664 .vmux = SAA7115_SVIDEO3,
665 .amux = EM28XX_AMUX_LINE_IN,
666 } },
667 },
668 [EM2860_BOARD_NETGMBH_CAM] = {
669 /* Beijing Huaqi Information Digital Technology Co., Ltd */
670 .name = "NetGMBH Cam",
671 .valid = EM28XX_BOARD_NOT_VALIDATED,
672 .tuner_type = TUNER_ABSENT,
673 .is_webcam = 1,
674 .input = { {
675 .type = EM28XX_VMUX_COMPOSITE1,
676 .vmux = 0,
677 .amux = EM28XX_AMUX_VIDEO,
678 } },
679 },
680 [EM2860_BOARD_TYPHOON_DVD_MAKER] = {
681 .name = "Typhoon DVD Maker",
682 .decoder = EM28XX_SAA711X,
683 .tuner_type = TUNER_ABSENT, /* Capture only device */
684 .input = { {
685 .type = EM28XX_VMUX_COMPOSITE1,
686 .vmux = SAA7115_COMPOSITE0,
687 .amux = EM28XX_AMUX_LINE_IN,
688 }, {
689 .type = EM28XX_VMUX_SVIDEO,
690 .vmux = SAA7115_SVIDEO3,
691 .amux = EM28XX_AMUX_LINE_IN,
692 } },
693 },
694 [EM2860_BOARD_GADMEI_UTV330] = {
695 .name = "Gadmei UTV330",
696 .valid = EM28XX_BOARD_NOT_VALIDATED,
697 .tuner_type = TUNER_TNF_5335MF,
698 .tda9887_conf = TDA9887_PRESENT,
699 .decoder = EM28XX_SAA711X,
700 .input = { {
701 .type = EM28XX_VMUX_TELEVISION,
702 .vmux = SAA7115_COMPOSITE2,
703 .amux = EM28XX_AMUX_VIDEO,
704 }, {
705 .type = EM28XX_VMUX_COMPOSITE1,
706 .vmux = SAA7115_COMPOSITE0,
707 .amux = EM28XX_AMUX_LINE_IN,
708 }, {
709 .type = EM28XX_VMUX_SVIDEO,
710 .vmux = SAA7115_SVIDEO3,
711 .amux = EM28XX_AMUX_LINE_IN,
712 } },
713 },
714 [EM2861_BOARD_GADMEI_UTV330PLUS] = {
715 .name = "Gadmei UTV330+",
716 .tuner_type = TUNER_TNF_5335MF,
717 .tda9887_conf = TDA9887_PRESENT,
718 .ir_codes = RC_MAP_GADMEI_RM008Z,
719 .decoder = EM28XX_SAA711X,
720 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
721 .input = { {
722 .type = EM28XX_VMUX_TELEVISION,
723 .vmux = SAA7115_COMPOSITE2,
724 .amux = EM28XX_AMUX_VIDEO,
725 }, {
726 .type = EM28XX_VMUX_COMPOSITE1,
727 .vmux = SAA7115_COMPOSITE0,
728 .amux = EM28XX_AMUX_LINE_IN,
729 }, {
730 .type = EM28XX_VMUX_SVIDEO,
731 .vmux = SAA7115_SVIDEO3,
732 .amux = EM28XX_AMUX_LINE_IN,
733 } },
734 },
735 [EM2860_BOARD_TERRATEC_HYBRID_XS] = {
736 .name = "Terratec Cinergy A Hybrid XS",
737 .valid = EM28XX_BOARD_NOT_VALIDATED,
738 .tuner_type = TUNER_XC2028,
739 .tuner_gpio = default_tuner_gpio,
740 .decoder = EM28XX_TVP5150,
741
742 .input = { {
743 .type = EM28XX_VMUX_TELEVISION,
744 .vmux = TVP5150_COMPOSITE0,
745 .amux = EM28XX_AMUX_VIDEO,
746 .gpio = hauppauge_wintv_hvr_900_analog,
747 }, {
748 .type = EM28XX_VMUX_COMPOSITE1,
749 .vmux = TVP5150_COMPOSITE1,
750 .amux = EM28XX_AMUX_LINE_IN,
751 .gpio = hauppauge_wintv_hvr_900_analog,
752 }, {
753 .type = EM28XX_VMUX_SVIDEO,
754 .vmux = TVP5150_SVIDEO,
755 .amux = EM28XX_AMUX_LINE_IN,
756 .gpio = hauppauge_wintv_hvr_900_analog,
757 } },
758 },
759 [EM2861_BOARD_KWORLD_PVRTV_300U] = {
760 .name = "KWorld PVRTV 300U",
761 .valid = EM28XX_BOARD_NOT_VALIDATED,
762 .tuner_type = TUNER_XC2028,
763 .tuner_gpio = default_tuner_gpio,
764 .decoder = EM28XX_TVP5150,
765 .input = { {
766 .type = EM28XX_VMUX_TELEVISION,
767 .vmux = TVP5150_COMPOSITE0,
768 .amux = EM28XX_AMUX_VIDEO,
769 }, {
770 .type = EM28XX_VMUX_COMPOSITE1,
771 .vmux = TVP5150_COMPOSITE1,
772 .amux = EM28XX_AMUX_LINE_IN,
773 }, {
774 .type = EM28XX_VMUX_SVIDEO,
775 .vmux = TVP5150_SVIDEO,
776 .amux = EM28XX_AMUX_LINE_IN,
777 } },
778 },
779 [EM2861_BOARD_YAKUMO_MOVIE_MIXER] = {
780 .name = "Yakumo MovieMixer",
781 .tuner_type = TUNER_ABSENT, /* Capture only device */
782 .decoder = EM28XX_TVP5150,
783 .input = { {
784 .type = EM28XX_VMUX_TELEVISION,
785 .vmux = TVP5150_COMPOSITE0,
786 .amux = EM28XX_AMUX_VIDEO,
787 }, {
788 .type = EM28XX_VMUX_COMPOSITE1,
789 .vmux = TVP5150_COMPOSITE1,
790 .amux = EM28XX_AMUX_LINE_IN,
791 }, {
792 .type = EM28XX_VMUX_SVIDEO,
793 .vmux = TVP5150_SVIDEO,
794 .amux = EM28XX_AMUX_LINE_IN,
795 } },
796 },
797 [EM2860_BOARD_TVP5150_REFERENCE_DESIGN] = {
798 .name = "EM2860/TVP5150 Reference Design",
799 .tuner_type = TUNER_ABSENT, /* Capture only device */
800 .decoder = EM28XX_TVP5150,
801 .input = { {
802 .type = EM28XX_VMUX_COMPOSITE1,
803 .vmux = TVP5150_COMPOSITE1,
804 .amux = EM28XX_AMUX_LINE_IN,
805 }, {
806 .type = EM28XX_VMUX_SVIDEO,
807 .vmux = TVP5150_SVIDEO,
808 .amux = EM28XX_AMUX_LINE_IN,
809 } },
810 },
811 [EM2861_BOARD_PLEXTOR_PX_TV100U] = {
812 .name = "Plextor ConvertX PX-TV100U",
813 .tuner_type = TUNER_TNF_5335MF,
814 .xclk = EM28XX_XCLK_I2S_MSB_TIMING |
815 EM28XX_XCLK_FREQUENCY_12MHZ,
816 .tda9887_conf = TDA9887_PRESENT,
817 .decoder = EM28XX_TVP5150,
818 .has_msp34xx = 1,
819 .input = { {
820 .type = EM28XX_VMUX_TELEVISION,
821 .vmux = TVP5150_COMPOSITE0,
822 .amux = EM28XX_AMUX_LINE_IN,
823 .gpio = pinnacle_hybrid_pro_analog,
824 }, {
825 .type = EM28XX_VMUX_COMPOSITE1,
826 .vmux = TVP5150_COMPOSITE1,
827 .amux = EM28XX_AMUX_LINE_IN,
828 .gpio = pinnacle_hybrid_pro_analog,
829 }, {
830 .type = EM28XX_VMUX_SVIDEO,
831 .vmux = TVP5150_SVIDEO,
832 .amux = EM28XX_AMUX_LINE_IN,
833 .gpio = pinnacle_hybrid_pro_analog,
834 } },
835 },
836
837 /* Those boards with em2870 are DVB Only*/
838
839 [EM2870_BOARD_TERRATEC_XS] = {
840 .name = "Terratec Cinergy T XS",
841 .valid = EM28XX_BOARD_NOT_VALIDATED,
842 .tuner_type = TUNER_XC2028,
843 .tuner_gpio = default_tuner_gpio,
844 },
845 [EM2870_BOARD_TERRATEC_XS_MT2060] = {
846 .name = "Terratec Cinergy T XS (MT2060)",
847 .valid = EM28XX_BOARD_NOT_VALIDATED,
848 .tuner_type = TUNER_ABSENT, /* MT2060 */
849 },
850 [EM2870_BOARD_KWORLD_350U] = {
851 .name = "Kworld 350 U DVB-T",
852 .valid = EM28XX_BOARD_NOT_VALIDATED,
853 .tuner_type = TUNER_XC2028,
854 .tuner_gpio = default_tuner_gpio,
855 },
856 [EM2870_BOARD_KWORLD_355U] = {
857 .name = "Kworld 355 U DVB-T",
858 .valid = EM28XX_BOARD_NOT_VALIDATED,
859 .tuner_type = TUNER_ABSENT,
860 .tuner_gpio = default_tuner_gpio,
861 .has_dvb = 1,
862 .dvb_gpio = default_digital,
863 },
864 [EM2870_BOARD_PINNACLE_PCTV_DVB] = {
865 .name = "Pinnacle PCTV DVB-T",
866 .valid = EM28XX_BOARD_NOT_VALIDATED,
867 .tuner_type = TUNER_ABSENT, /* MT2060 */
868 /* djh - I have serious doubts this is right... */
869 .xclk = EM28XX_XCLK_IR_RC5_MODE |
870 EM28XX_XCLK_FREQUENCY_10MHZ,
871 },
872 [EM2870_BOARD_COMPRO_VIDEOMATE] = {
873 .name = "Compro, VideoMate U3",
874 .valid = EM28XX_BOARD_NOT_VALIDATED,
875 .tuner_type = TUNER_ABSENT, /* MT2060 */
876 },
877
878 [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = {
879 .name = "Terratec Hybrid XS Secam",
880 .has_msp34xx = 1,
881 .tuner_type = TUNER_XC2028,
882 .tuner_gpio = default_tuner_gpio,
883 .decoder = EM28XX_TVP5150,
884 .has_dvb = 1,
885 .dvb_gpio = terratec_cinergy_USB_XS_FR_digital,
886 .input = { {
887 .type = EM28XX_VMUX_TELEVISION,
888 .vmux = TVP5150_COMPOSITE0,
889 .amux = EM28XX_AMUX_VIDEO,
890 .gpio = terratec_cinergy_USB_XS_FR_analog,
891 }, {
892 .type = EM28XX_VMUX_COMPOSITE1,
893 .vmux = TVP5150_COMPOSITE1,
894 .amux = EM28XX_AMUX_LINE_IN,
895 .gpio = terratec_cinergy_USB_XS_FR_analog,
896 }, {
897 .type = EM28XX_VMUX_SVIDEO,
898 .vmux = TVP5150_SVIDEO,
899 .amux = EM28XX_AMUX_LINE_IN,
900 .gpio = terratec_cinergy_USB_XS_FR_analog,
901 } },
902 },
903 [EM2884_BOARD_TERRATEC_H5] = {
904 .name = "Terratec Cinergy H5",
905 .has_dvb = 1,
906 #if 0
907 .tuner_type = TUNER_PHILIPS_TDA8290,
908 .tuner_addr = 0x41,
909 .dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */
910 .tuner_gpio = terratec_h5_gpio,
911 #else
912 .tuner_type = TUNER_ABSENT,
913 #endif
914 .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
915 EM28XX_I2C_CLK_WAIT_ENABLE |
916 EM28XX_I2C_FREQ_400_KHZ,
917 },
918 [EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C] = {
919 .name = "Hauppauge WinTV HVR 930C",
920 .has_dvb = 1,
921 #if 0 /* FIXME: Add analog support */
922 .tuner_type = TUNER_XC5000,
923 .tuner_addr = 0x41,
924 .dvb_gpio = hauppauge_930c_digital,
925 .tuner_gpio = hauppauge_930c_gpio,
926 #else
927 .tuner_type = TUNER_ABSENT,
928 #endif
929 .ir_codes = RC_MAP_HAUPPAUGE,
930 .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
931 EM28XX_I2C_CLK_WAIT_ENABLE |
932 EM28XX_I2C_FREQ_400_KHZ,
933 },
934 [EM2884_BOARD_CINERGY_HTC_STICK] = {
935 .name = "Terratec Cinergy HTC Stick",
936 .has_dvb = 1,
937 #if 0
938 .tuner_type = TUNER_PHILIPS_TDA8290,
939 .tuner_addr = 0x41,
940 .dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */
941 .tuner_gpio = terratec_h5_gpio,
942 #endif
943 .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
944 EM28XX_I2C_CLK_WAIT_ENABLE |
945 EM28XX_I2C_FREQ_400_KHZ,
946 },
947 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = {
948 .name = "Hauppauge WinTV HVR 900",
949 .tda9887_conf = TDA9887_PRESENT,
950 .tuner_type = TUNER_XC2028,
951 .tuner_gpio = default_tuner_gpio,
952 .mts_firmware = 1,
953 .has_dvb = 1,
954 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
955 .ir_codes = RC_MAP_HAUPPAUGE,
956 .decoder = EM28XX_TVP5150,
957 .input = { {
958 .type = EM28XX_VMUX_TELEVISION,
959 .vmux = TVP5150_COMPOSITE0,
960 .amux = EM28XX_AMUX_VIDEO,
961 .gpio = hauppauge_wintv_hvr_900_analog,
962 }, {
963 .type = EM28XX_VMUX_COMPOSITE1,
964 .vmux = TVP5150_COMPOSITE1,
965 .amux = EM28XX_AMUX_LINE_IN,
966 .gpio = hauppauge_wintv_hvr_900_analog,
967 }, {
968 .type = EM28XX_VMUX_SVIDEO,
969 .vmux = TVP5150_SVIDEO,
970 .amux = EM28XX_AMUX_LINE_IN,
971 .gpio = hauppauge_wintv_hvr_900_analog,
972 } },
973 },
974 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = {
975 .name = "Hauppauge WinTV HVR 900 (R2)",
976 .tda9887_conf = TDA9887_PRESENT,
977 .tuner_type = TUNER_XC2028,
978 .tuner_gpio = default_tuner_gpio,
979 .mts_firmware = 1,
980 .has_dvb = 1,
981 .dvb_gpio = hauppauge_wintv_hvr_900R2_digital,
982 .ir_codes = RC_MAP_HAUPPAUGE,
983 .decoder = EM28XX_TVP5150,
984 .input = { {
985 .type = EM28XX_VMUX_TELEVISION,
986 .vmux = TVP5150_COMPOSITE0,
987 .amux = EM28XX_AMUX_VIDEO,
988 .gpio = hauppauge_wintv_hvr_900_analog,
989 }, {
990 .type = EM28XX_VMUX_COMPOSITE1,
991 .vmux = TVP5150_COMPOSITE1,
992 .amux = EM28XX_AMUX_LINE_IN,
993 .gpio = hauppauge_wintv_hvr_900_analog,
994 }, {
995 .type = EM28XX_VMUX_SVIDEO,
996 .vmux = TVP5150_SVIDEO,
997 .amux = EM28XX_AMUX_LINE_IN,
998 .gpio = hauppauge_wintv_hvr_900_analog,
999 } },
1000 },
1001 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850] = {
1002 .name = "Hauppauge WinTV HVR 850",
1003 .tuner_type = TUNER_XC2028,
1004 .tuner_gpio = default_tuner_gpio,
1005 .mts_firmware = 1,
1006 .has_dvb = 1,
1007 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1008 .ir_codes = RC_MAP_HAUPPAUGE,
1009 .decoder = EM28XX_TVP5150,
1010 .input = { {
1011 .type = EM28XX_VMUX_TELEVISION,
1012 .vmux = TVP5150_COMPOSITE0,
1013 .amux = EM28XX_AMUX_VIDEO,
1014 .gpio = hauppauge_wintv_hvr_900_analog,
1015 }, {
1016 .type = EM28XX_VMUX_COMPOSITE1,
1017 .vmux = TVP5150_COMPOSITE1,
1018 .amux = EM28XX_AMUX_LINE_IN,
1019 .gpio = hauppauge_wintv_hvr_900_analog,
1020 }, {
1021 .type = EM28XX_VMUX_SVIDEO,
1022 .vmux = TVP5150_SVIDEO,
1023 .amux = EM28XX_AMUX_LINE_IN,
1024 .gpio = hauppauge_wintv_hvr_900_analog,
1025 } },
1026 },
1027 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = {
1028 .name = "Hauppauge WinTV HVR 950",
1029 .tuner_type = TUNER_XC2028,
1030 .tuner_gpio = default_tuner_gpio,
1031 .mts_firmware = 1,
1032 .has_dvb = 1,
1033 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1034 .ir_codes = RC_MAP_HAUPPAUGE,
1035 .decoder = EM28XX_TVP5150,
1036 .input = { {
1037 .type = EM28XX_VMUX_TELEVISION,
1038 .vmux = TVP5150_COMPOSITE0,
1039 .amux = EM28XX_AMUX_VIDEO,
1040 .gpio = hauppauge_wintv_hvr_900_analog,
1041 }, {
1042 .type = EM28XX_VMUX_COMPOSITE1,
1043 .vmux = TVP5150_COMPOSITE1,
1044 .amux = EM28XX_AMUX_LINE_IN,
1045 .gpio = hauppauge_wintv_hvr_900_analog,
1046 }, {
1047 .type = EM28XX_VMUX_SVIDEO,
1048 .vmux = TVP5150_SVIDEO,
1049 .amux = EM28XX_AMUX_LINE_IN,
1050 .gpio = hauppauge_wintv_hvr_900_analog,
1051 } },
1052 },
1053 [EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = {
1054 .name = "Pinnacle PCTV HD Pro Stick",
1055 .tuner_type = TUNER_XC2028,
1056 .tuner_gpio = default_tuner_gpio,
1057 .mts_firmware = 1,
1058 .has_dvb = 1,
1059 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1060 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
1061 .decoder = EM28XX_TVP5150,
1062 .input = { {
1063 .type = EM28XX_VMUX_TELEVISION,
1064 .vmux = TVP5150_COMPOSITE0,
1065 .amux = EM28XX_AMUX_VIDEO,
1066 .gpio = hauppauge_wintv_hvr_900_analog,
1067 }, {
1068 .type = EM28XX_VMUX_COMPOSITE1,
1069 .vmux = TVP5150_COMPOSITE1,
1070 .amux = EM28XX_AMUX_LINE_IN,
1071 .gpio = hauppauge_wintv_hvr_900_analog,
1072 }, {
1073 .type = EM28XX_VMUX_SVIDEO,
1074 .vmux = TVP5150_SVIDEO,
1075 .amux = EM28XX_AMUX_LINE_IN,
1076 .gpio = hauppauge_wintv_hvr_900_analog,
1077 } },
1078 },
1079 [EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = {
1080 .name = "AMD ATI TV Wonder HD 600",
1081 .tuner_type = TUNER_XC2028,
1082 .tuner_gpio = default_tuner_gpio,
1083 .mts_firmware = 1,
1084 .has_dvb = 1,
1085 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1086 .ir_codes = RC_MAP_ATI_TV_WONDER_HD_600,
1087 .decoder = EM28XX_TVP5150,
1088 .input = { {
1089 .type = EM28XX_VMUX_TELEVISION,
1090 .vmux = TVP5150_COMPOSITE0,
1091 .amux = EM28XX_AMUX_VIDEO,
1092 .gpio = hauppauge_wintv_hvr_900_analog,
1093 }, {
1094 .type = EM28XX_VMUX_COMPOSITE1,
1095 .vmux = TVP5150_COMPOSITE1,
1096 .amux = EM28XX_AMUX_LINE_IN,
1097 .gpio = hauppauge_wintv_hvr_900_analog,
1098 }, {
1099 .type = EM28XX_VMUX_SVIDEO,
1100 .vmux = TVP5150_SVIDEO,
1101 .amux = EM28XX_AMUX_LINE_IN,
1102 .gpio = hauppauge_wintv_hvr_900_analog,
1103 } },
1104 },
1105 [EM2880_BOARD_TERRATEC_HYBRID_XS] = {
1106 .name = "Terratec Hybrid XS",
1107 .tuner_type = TUNER_XC2028,
1108 .tuner_gpio = default_tuner_gpio,
1109 .decoder = EM28XX_TVP5150,
1110 .has_dvb = 1,
1111 .dvb_gpio = default_digital,
1112 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS,
1113 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1114 .input = { {
1115 .type = EM28XX_VMUX_TELEVISION,
1116 .vmux = TVP5150_COMPOSITE0,
1117 .amux = EM28XX_AMUX_VIDEO,
1118 .gpio = default_analog,
1119 }, {
1120 .type = EM28XX_VMUX_COMPOSITE1,
1121 .vmux = TVP5150_COMPOSITE1,
1122 .amux = EM28XX_AMUX_LINE_IN,
1123 .gpio = default_analog,
1124 }, {
1125 .type = EM28XX_VMUX_SVIDEO,
1126 .vmux = TVP5150_SVIDEO,
1127 .amux = EM28XX_AMUX_LINE_IN,
1128 .gpio = default_analog,
1129 } },
1130 },
1131 /* maybe there's a reason behind it why Terratec sells the Hybrid XS
1132 as Prodigy XS with a different PID, let's keep it separated for now
1133 maybe we'll need it lateron */
1134 [EM2880_BOARD_TERRATEC_PRODIGY_XS] = {
1135 .name = "Terratec Prodigy XS",
1136 .tuner_type = TUNER_XC2028,
1137 .tuner_gpio = default_tuner_gpio,
1138 .decoder = EM28XX_TVP5150,
1139 .input = { {
1140 .type = EM28XX_VMUX_TELEVISION,
1141 .vmux = TVP5150_COMPOSITE0,
1142 .amux = EM28XX_AMUX_VIDEO,
1143 .gpio = hauppauge_wintv_hvr_900_analog,
1144 }, {
1145 .type = EM28XX_VMUX_COMPOSITE1,
1146 .vmux = TVP5150_COMPOSITE1,
1147 .amux = EM28XX_AMUX_LINE_IN,
1148 .gpio = hauppauge_wintv_hvr_900_analog,
1149 }, {
1150 .type = EM28XX_VMUX_SVIDEO,
1151 .vmux = TVP5150_SVIDEO,
1152 .amux = EM28XX_AMUX_LINE_IN,
1153 .gpio = hauppauge_wintv_hvr_900_analog,
1154 } },
1155 },
1156 [EM2820_BOARD_MSI_VOX_USB_2] = {
1157 .name = "MSI VOX USB 2.0",
1158 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1159 .tda9887_conf = TDA9887_PRESENT |
1160 TDA9887_PORT1_ACTIVE |
1161 TDA9887_PORT2_ACTIVE,
1162 .max_range_640_480 = 1,
1163 .decoder = EM28XX_SAA711X,
1164 .input = { {
1165 .type = EM28XX_VMUX_TELEVISION,
1166 .vmux = SAA7115_COMPOSITE4,
1167 .amux = EM28XX_AMUX_VIDEO,
1168 }, {
1169 .type = EM28XX_VMUX_COMPOSITE1,
1170 .vmux = SAA7115_COMPOSITE0,
1171 .amux = EM28XX_AMUX_LINE_IN,
1172 }, {
1173 .type = EM28XX_VMUX_SVIDEO,
1174 .vmux = SAA7115_SVIDEO3,
1175 .amux = EM28XX_AMUX_LINE_IN,
1176 } },
1177 },
1178 [EM2800_BOARD_TERRATEC_CINERGY_200] = {
1179 .name = "Terratec Cinergy 200 USB",
1180 .is_em2800 = 1,
1181 .has_ir_i2c = 1,
1182 .tuner_type = TUNER_LG_TALN,
1183 .tda9887_conf = TDA9887_PRESENT,
1184 .decoder = EM28XX_SAA711X,
1185 .input = { {
1186 .type = EM28XX_VMUX_TELEVISION,
1187 .vmux = SAA7115_COMPOSITE2,
1188 .amux = EM28XX_AMUX_VIDEO,
1189 }, {
1190 .type = EM28XX_VMUX_COMPOSITE1,
1191 .vmux = SAA7115_COMPOSITE0,
1192 .amux = EM28XX_AMUX_LINE_IN,
1193 }, {
1194 .type = EM28XX_VMUX_SVIDEO,
1195 .vmux = SAA7115_SVIDEO3,
1196 .amux = EM28XX_AMUX_LINE_IN,
1197 } },
1198 },
1199 [EM2800_BOARD_GRABBEEX_USB2800] = {
1200 .name = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder",
1201 .is_em2800 = 1,
1202 .decoder = EM28XX_SAA711X,
1203 .tuner_type = TUNER_ABSENT, /* capture only board */
1204 .input = { {
1205 .type = EM28XX_VMUX_COMPOSITE1,
1206 .vmux = SAA7115_COMPOSITE0,
1207 .amux = EM28XX_AMUX_LINE_IN,
1208 }, {
1209 .type = EM28XX_VMUX_SVIDEO,
1210 .vmux = SAA7115_SVIDEO3,
1211 .amux = EM28XX_AMUX_LINE_IN,
1212 } },
1213 },
1214 [EM2800_BOARD_VC211A] = {
1215 .name = "Actionmaster/LinXcel/Digitus VC211A",
1216 .is_em2800 = 1,
1217 .tuner_type = TUNER_ABSENT, /* Capture-only board */
1218 .decoder = EM28XX_SAA711X,
1219 .input = { {
1220 .type = EM28XX_VMUX_COMPOSITE1,
1221 .vmux = SAA7115_COMPOSITE0,
1222 .amux = EM28XX_AMUX_LINE_IN,
1223 .gpio = vc211a_enable,
1224 }, {
1225 .type = EM28XX_VMUX_SVIDEO,
1226 .vmux = SAA7115_SVIDEO3,
1227 .amux = EM28XX_AMUX_LINE_IN,
1228 .gpio = vc211a_enable,
1229 } },
1230 },
1231 [EM2800_BOARD_LEADTEK_WINFAST_USBII] = {
1232 .name = "Leadtek Winfast USB II",
1233 .is_em2800 = 1,
1234 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1235 .tda9887_conf = TDA9887_PRESENT,
1236 .decoder = EM28XX_SAA711X,
1237 .input = { {
1238 .type = EM28XX_VMUX_TELEVISION,
1239 .vmux = SAA7115_COMPOSITE2,
1240 .amux = EM28XX_AMUX_VIDEO,
1241 }, {
1242 .type = EM28XX_VMUX_COMPOSITE1,
1243 .vmux = SAA7115_COMPOSITE0,
1244 .amux = EM28XX_AMUX_LINE_IN,
1245 }, {
1246 .type = EM28XX_VMUX_SVIDEO,
1247 .vmux = SAA7115_SVIDEO3,
1248 .amux = EM28XX_AMUX_LINE_IN,
1249 } },
1250 },
1251 [EM2800_BOARD_KWORLD_USB2800] = {
1252 .name = "Kworld USB2800",
1253 .is_em2800 = 1,
1254 .tuner_type = TUNER_PHILIPS_FCV1236D,
1255 .tda9887_conf = TDA9887_PRESENT,
1256 .decoder = EM28XX_SAA711X,
1257 .input = { {
1258 .type = EM28XX_VMUX_TELEVISION,
1259 .vmux = SAA7115_COMPOSITE2,
1260 .amux = EM28XX_AMUX_VIDEO,
1261 }, {
1262 .type = EM28XX_VMUX_COMPOSITE1,
1263 .vmux = SAA7115_COMPOSITE0,
1264 .amux = EM28XX_AMUX_LINE_IN,
1265 }, {
1266 .type = EM28XX_VMUX_SVIDEO,
1267 .vmux = SAA7115_SVIDEO3,
1268 .amux = EM28XX_AMUX_LINE_IN,
1269 } },
1270 },
1271 [EM2820_BOARD_PINNACLE_DVC_90] = {
1272 .name = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker "
1273 "/ Kworld DVD Maker 2 / Plextor ConvertX PX-AV100U",
1274 .tuner_type = TUNER_ABSENT, /* capture only board */
1275 .decoder = EM28XX_SAA711X,
1276 .input = { {
1277 .type = EM28XX_VMUX_COMPOSITE1,
1278 .vmux = SAA7115_COMPOSITE0,
1279 .amux = EM28XX_AMUX_LINE_IN,
1280 }, {
1281 .type = EM28XX_VMUX_SVIDEO,
1282 .vmux = SAA7115_SVIDEO3,
1283 .amux = EM28XX_AMUX_LINE_IN,
1284 } },
1285 },
1286 [EM2800_BOARD_VGEAR_POCKETTV] = {
1287 .name = "V-Gear PocketTV",
1288 .is_em2800 = 1,
1289 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1290 .tda9887_conf = TDA9887_PRESENT,
1291 .decoder = EM28XX_SAA711X,
1292 .input = { {
1293 .type = EM28XX_VMUX_TELEVISION,
1294 .vmux = SAA7115_COMPOSITE2,
1295 .amux = EM28XX_AMUX_VIDEO,
1296 }, {
1297 .type = EM28XX_VMUX_COMPOSITE1,
1298 .vmux = SAA7115_COMPOSITE0,
1299 .amux = EM28XX_AMUX_LINE_IN,
1300 }, {
1301 .type = EM28XX_VMUX_SVIDEO,
1302 .vmux = SAA7115_SVIDEO3,
1303 .amux = EM28XX_AMUX_LINE_IN,
1304 } },
1305 },
1306 [EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2] = {
1307 .name = "Pixelview PlayTV Box 4 USB 2.0",
1308 .tda9887_conf = TDA9887_PRESENT,
1309 .tuner_type = TUNER_YMEC_TVF_5533MF,
1310 .decoder = EM28XX_SAA711X,
1311 .input = { {
1312 .type = EM28XX_VMUX_TELEVISION,
1313 .vmux = SAA7115_COMPOSITE2,
1314 .amux = EM28XX_AMUX_VIDEO,
1315 .aout = EM28XX_AOUT_MONO | /* I2S */
1316 EM28XX_AOUT_MASTER, /* Line out pin */
1317 }, {
1318 .type = EM28XX_VMUX_COMPOSITE1,
1319 .vmux = SAA7115_COMPOSITE0,
1320 .amux = EM28XX_AMUX_LINE_IN,
1321 }, {
1322 .type = EM28XX_VMUX_SVIDEO,
1323 .vmux = SAA7115_SVIDEO3,
1324 .amux = EM28XX_AMUX_LINE_IN,
1325 } },
1326 },
1327 [EM2820_BOARD_PROLINK_PLAYTV_USB2] = {
1328 .name = "SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0",
1329 .has_snapshot_button = 1,
1330 .tda9887_conf = TDA9887_PRESENT,
1331 .tuner_type = TUNER_YMEC_TVF_5533MF,
1332 .decoder = EM28XX_SAA711X,
1333 .input = { {
1334 .type = EM28XX_VMUX_TELEVISION,
1335 .vmux = SAA7115_COMPOSITE2,
1336 .amux = EM28XX_AMUX_VIDEO,
1337 .aout = EM28XX_AOUT_MONO | /* I2S */
1338 EM28XX_AOUT_MASTER, /* Line out pin */
1339 }, {
1340 .type = EM28XX_VMUX_COMPOSITE1,
1341 .vmux = SAA7115_COMPOSITE0,
1342 .amux = EM28XX_AMUX_LINE_IN,
1343 }, {
1344 .type = EM28XX_VMUX_SVIDEO,
1345 .vmux = SAA7115_SVIDEO3,
1346 .amux = EM28XX_AMUX_LINE_IN,
1347 } },
1348 },
1349 [EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = {
1350 .name = "EM2860/SAA711X Reference Design",
1351 .has_snapshot_button = 1,
1352 .tuner_type = TUNER_ABSENT,
1353 .decoder = EM28XX_SAA711X,
1354 .input = { {
1355 .type = EM28XX_VMUX_SVIDEO,
1356 .vmux = SAA7115_SVIDEO3,
1357 }, {
1358 .type = EM28XX_VMUX_COMPOSITE1,
1359 .vmux = SAA7115_COMPOSITE0,
1360 } },
1361 },
1362
1363 [EM2874_BOARD_LEADERSHIP_ISDBT] = {
1364 .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
1365 EM28XX_I2C_CLK_WAIT_ENABLE |
1366 EM28XX_I2C_FREQ_100_KHZ,
1367 .xclk = EM28XX_XCLK_FREQUENCY_10MHZ,
1368 .name = "EM2874 Leadership ISDBT",
1369 .tuner_type = TUNER_ABSENT,
1370 .tuner_gpio = leadership_reset,
1371 .dvb_gpio = leadership_digital,
1372 .has_dvb = 1,
1373 },
1374
1375 [EM2880_BOARD_MSI_DIGIVOX_AD] = {
1376 .name = "MSI DigiVox A/D",
1377 .valid = EM28XX_BOARD_NOT_VALIDATED,
1378 .tuner_type = TUNER_XC2028,
1379 .tuner_gpio = default_tuner_gpio,
1380 .decoder = EM28XX_TVP5150,
1381 .input = { {
1382 .type = EM28XX_VMUX_TELEVISION,
1383 .vmux = TVP5150_COMPOSITE0,
1384 .amux = EM28XX_AMUX_VIDEO,
1385 .gpio = em2880_msi_digivox_ad_analog,
1386 }, {
1387 .type = EM28XX_VMUX_COMPOSITE1,
1388 .vmux = TVP5150_COMPOSITE1,
1389 .amux = EM28XX_AMUX_LINE_IN,
1390 .gpio = em2880_msi_digivox_ad_analog,
1391 }, {
1392 .type = EM28XX_VMUX_SVIDEO,
1393 .vmux = TVP5150_SVIDEO,
1394 .amux = EM28XX_AMUX_LINE_IN,
1395 .gpio = em2880_msi_digivox_ad_analog,
1396 } },
1397 },
1398 [EM2880_BOARD_MSI_DIGIVOX_AD_II] = {
1399 .name = "MSI DigiVox A/D II",
1400 .valid = EM28XX_BOARD_NOT_VALIDATED,
1401 .tuner_type = TUNER_XC2028,
1402 .tuner_gpio = default_tuner_gpio,
1403 .decoder = EM28XX_TVP5150,
1404 .input = { {
1405 .type = EM28XX_VMUX_TELEVISION,
1406 .vmux = TVP5150_COMPOSITE0,
1407 .amux = EM28XX_AMUX_VIDEO,
1408 .gpio = em2880_msi_digivox_ad_analog,
1409 }, {
1410 .type = EM28XX_VMUX_COMPOSITE1,
1411 .vmux = TVP5150_COMPOSITE1,
1412 .amux = EM28XX_AMUX_LINE_IN,
1413 .gpio = em2880_msi_digivox_ad_analog,
1414 }, {
1415 .type = EM28XX_VMUX_SVIDEO,
1416 .vmux = TVP5150_SVIDEO,
1417 .amux = EM28XX_AMUX_LINE_IN,
1418 .gpio = em2880_msi_digivox_ad_analog,
1419 } },
1420 },
1421 [EM2880_BOARD_KWORLD_DVB_305U] = {
1422 .name = "KWorld DVB-T 305U",
1423 .tuner_type = TUNER_XC2028,
1424 .tuner_gpio = default_tuner_gpio,
1425 .decoder = EM28XX_TVP5150,
1426 .input = { {
1427 .type = EM28XX_VMUX_TELEVISION,
1428 .vmux = TVP5150_COMPOSITE0,
1429 .amux = EM28XX_AMUX_VIDEO,
1430 }, {
1431 .type = EM28XX_VMUX_COMPOSITE1,
1432 .vmux = TVP5150_COMPOSITE1,
1433 .amux = EM28XX_AMUX_LINE_IN,
1434 }, {
1435 .type = EM28XX_VMUX_SVIDEO,
1436 .vmux = TVP5150_SVIDEO,
1437 .amux = EM28XX_AMUX_LINE_IN,
1438 } },
1439 },
1440 [EM2880_BOARD_KWORLD_DVB_310U] = {
1441 .name = "KWorld DVB-T 310U",
1442 .tuner_type = TUNER_XC2028,
1443 .tuner_gpio = default_tuner_gpio,
1444 .has_dvb = 1,
1445 .dvb_gpio = default_digital,
1446 .mts_firmware = 1,
1447 .decoder = EM28XX_TVP5150,
1448 .input = { {
1449 .type = EM28XX_VMUX_TELEVISION,
1450 .vmux = TVP5150_COMPOSITE0,
1451 .amux = EM28XX_AMUX_VIDEO,
1452 .gpio = default_analog,
1453 }, {
1454 .type = EM28XX_VMUX_COMPOSITE1,
1455 .vmux = TVP5150_COMPOSITE1,
1456 .amux = EM28XX_AMUX_LINE_IN,
1457 .gpio = default_analog,
1458 }, { /* S-video has not been tested yet */
1459 .type = EM28XX_VMUX_SVIDEO,
1460 .vmux = TVP5150_SVIDEO,
1461 .amux = EM28XX_AMUX_LINE_IN,
1462 .gpio = default_analog,
1463 } },
1464 },
1465 [EM2882_BOARD_KWORLD_ATSC_315U] = {
1466 .name = "KWorld ATSC 315U HDTV TV Box",
1467 .valid = EM28XX_BOARD_NOT_VALIDATED,
1468 .tuner_type = TUNER_THOMSON_DTT761X,
1469 .tuner_gpio = em2882_kworld_315u_tuner_gpio,
1470 .tda9887_conf = TDA9887_PRESENT,
1471 .decoder = EM28XX_SAA711X,
1472 .has_dvb = 1,
1473 .dvb_gpio = em2882_kworld_315u_digital,
1474 .ir_codes = RC_MAP_KWORLD_315U,
1475 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1476 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
1477 /* Analog mode - still not ready */
1478 /*.input = { {
1479 .type = EM28XX_VMUX_TELEVISION,
1480 .vmux = SAA7115_COMPOSITE2,
1481 .amux = EM28XX_AMUX_VIDEO,
1482 .gpio = em2882_kworld_315u_analog,
1483 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1484 }, {
1485 .type = EM28XX_VMUX_COMPOSITE1,
1486 .vmux = SAA7115_COMPOSITE0,
1487 .amux = EM28XX_AMUX_LINE_IN,
1488 .gpio = em2882_kworld_315u_analog1,
1489 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1490 }, {
1491 .type = EM28XX_VMUX_SVIDEO,
1492 .vmux = SAA7115_SVIDEO3,
1493 .amux = EM28XX_AMUX_LINE_IN,
1494 .gpio = em2882_kworld_315u_analog1,
1495 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1496 } }, */
1497 },
1498 [EM2880_BOARD_EMPIRE_DUAL_TV] = {
1499 .name = "Empire dual TV",
1500 .tuner_type = TUNER_XC2028,
1501 .tuner_gpio = default_tuner_gpio,
1502 .has_dvb = 1,
1503 .dvb_gpio = default_digital,
1504 .mts_firmware = 1,
1505 .decoder = EM28XX_TVP5150,
1506 .input = { {
1507 .type = EM28XX_VMUX_TELEVISION,
1508 .vmux = TVP5150_COMPOSITE0,
1509 .amux = EM28XX_AMUX_VIDEO,
1510 .gpio = default_analog,
1511 }, {
1512 .type = EM28XX_VMUX_COMPOSITE1,
1513 .vmux = TVP5150_COMPOSITE1,
1514 .amux = EM28XX_AMUX_LINE_IN,
1515 .gpio = default_analog,
1516 }, {
1517 .type = EM28XX_VMUX_SVIDEO,
1518 .vmux = TVP5150_SVIDEO,
1519 .amux = EM28XX_AMUX_LINE_IN,
1520 .gpio = default_analog,
1521 } },
1522 },
1523 [EM2881_BOARD_DNT_DA2_HYBRID] = {
1524 .name = "DNT DA2 Hybrid",
1525 .valid = EM28XX_BOARD_NOT_VALIDATED,
1526 .tuner_type = TUNER_XC2028,
1527 .tuner_gpio = default_tuner_gpio,
1528 .decoder = EM28XX_TVP5150,
1529 .input = { {
1530 .type = EM28XX_VMUX_TELEVISION,
1531 .vmux = TVP5150_COMPOSITE0,
1532 .amux = EM28XX_AMUX_VIDEO,
1533 .gpio = default_analog,
1534 }, {
1535 .type = EM28XX_VMUX_COMPOSITE1,
1536 .vmux = TVP5150_COMPOSITE1,
1537 .amux = EM28XX_AMUX_LINE_IN,
1538 .gpio = default_analog,
1539 }, {
1540 .type = EM28XX_VMUX_SVIDEO,
1541 .vmux = TVP5150_SVIDEO,
1542 .amux = EM28XX_AMUX_LINE_IN,
1543 .gpio = default_analog,
1544 } },
1545 },
1546 [EM2881_BOARD_PINNACLE_HYBRID_PRO] = {
1547 .name = "Pinnacle Hybrid Pro",
1548 .tuner_type = TUNER_XC2028,
1549 .tuner_gpio = default_tuner_gpio,
1550 .decoder = EM28XX_TVP5150,
1551 .has_dvb = 1,
1552 .dvb_gpio = pinnacle_hybrid_pro_digital,
1553 .input = { {
1554 .type = EM28XX_VMUX_TELEVISION,
1555 .vmux = TVP5150_COMPOSITE0,
1556 .amux = EM28XX_AMUX_VIDEO,
1557 .gpio = pinnacle_hybrid_pro_analog,
1558 }, {
1559 .type = EM28XX_VMUX_COMPOSITE1,
1560 .vmux = TVP5150_COMPOSITE1,
1561 .amux = EM28XX_AMUX_LINE_IN,
1562 .gpio = pinnacle_hybrid_pro_analog,
1563 }, {
1564 .type = EM28XX_VMUX_SVIDEO,
1565 .vmux = TVP5150_SVIDEO,
1566 .amux = EM28XX_AMUX_LINE_IN,
1567 .gpio = pinnacle_hybrid_pro_analog,
1568 } },
1569 },
1570 [EM2882_BOARD_PINNACLE_HYBRID_PRO_330E] = {
1571 .name = "Pinnacle Hybrid Pro (330e)",
1572 .tuner_type = TUNER_XC2028,
1573 .tuner_gpio = default_tuner_gpio,
1574 .mts_firmware = 1,
1575 .has_dvb = 1,
1576 .dvb_gpio = hauppauge_wintv_hvr_900R2_digital,
1577 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
1578 .decoder = EM28XX_TVP5150,
1579 .input = { {
1580 .type = EM28XX_VMUX_TELEVISION,
1581 .vmux = TVP5150_COMPOSITE0,
1582 .amux = EM28XX_AMUX_VIDEO,
1583 .gpio = hauppauge_wintv_hvr_900_analog,
1584 }, {
1585 .type = EM28XX_VMUX_COMPOSITE1,
1586 .vmux = TVP5150_COMPOSITE1,
1587 .amux = EM28XX_AMUX_LINE_IN,
1588 .gpio = hauppauge_wintv_hvr_900_analog,
1589 }, {
1590 .type = EM28XX_VMUX_SVIDEO,
1591 .vmux = TVP5150_SVIDEO,
1592 .amux = EM28XX_AMUX_LINE_IN,
1593 .gpio = hauppauge_wintv_hvr_900_analog,
1594 } },
1595 },
1596 [EM2882_BOARD_KWORLD_VS_DVBT] = {
1597 .name = "Kworld VS-DVB-T 323UR",
1598 .tuner_type = TUNER_XC2028,
1599 .tuner_gpio = default_tuner_gpio,
1600 .decoder = EM28XX_TVP5150,
1601 .mts_firmware = 1,
1602 .has_dvb = 1,
1603 .dvb_gpio = kworld_330u_digital,
1604 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1605 .ir_codes = RC_MAP_KWORLD_315U,
1606 .input = { {
1607 .type = EM28XX_VMUX_TELEVISION,
1608 .vmux = TVP5150_COMPOSITE0,
1609 .amux = EM28XX_AMUX_VIDEO,
1610 }, {
1611 .type = EM28XX_VMUX_COMPOSITE1,
1612 .vmux = TVP5150_COMPOSITE1,
1613 .amux = EM28XX_AMUX_LINE_IN,
1614 }, {
1615 .type = EM28XX_VMUX_SVIDEO,
1616 .vmux = TVP5150_SVIDEO,
1617 .amux = EM28XX_AMUX_LINE_IN,
1618 } },
1619 },
1620 [EM2882_BOARD_TERRATEC_HYBRID_XS] = {
1621 .name = "Terratec Cinnergy Hybrid T USB XS (em2882)",
1622 .tuner_type = TUNER_XC2028,
1623 .tuner_gpio = default_tuner_gpio,
1624 .mts_firmware = 1,
1625 .decoder = EM28XX_TVP5150,
1626 .has_dvb = 1,
1627 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1628 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS,
1629 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1630 .input = { {
1631 .type = EM28XX_VMUX_TELEVISION,
1632 .vmux = TVP5150_COMPOSITE0,
1633 .amux = EM28XX_AMUX_VIDEO,
1634 .gpio = hauppauge_wintv_hvr_900_analog,
1635 }, {
1636 .type = EM28XX_VMUX_COMPOSITE1,
1637 .vmux = TVP5150_COMPOSITE1,
1638 .amux = EM28XX_AMUX_LINE_IN,
1639 .gpio = hauppauge_wintv_hvr_900_analog,
1640 }, {
1641 .type = EM28XX_VMUX_SVIDEO,
1642 .vmux = TVP5150_SVIDEO,
1643 .amux = EM28XX_AMUX_LINE_IN,
1644 .gpio = hauppauge_wintv_hvr_900_analog,
1645 } },
1646 },
1647 [EM2882_BOARD_DIKOM_DK300] = {
1648 .name = "Dikom DK300",
1649 .tuner_type = TUNER_XC2028,
1650 .tuner_gpio = default_tuner_gpio,
1651 .decoder = EM28XX_TVP5150,
1652 .mts_firmware = 1,
1653 .has_dvb = 1,
1654 .dvb_gpio = dikom_dk300_digital,
1655 .input = { {
1656 .type = EM28XX_VMUX_TELEVISION,
1657 .vmux = TVP5150_COMPOSITE0,
1658 .amux = EM28XX_AMUX_VIDEO,
1659 .gpio = default_analog,
1660 } },
1661 },
1662 [EM2883_BOARD_KWORLD_HYBRID_330U] = {
1663 .name = "Kworld PlusTV HD Hybrid 330",
1664 .tuner_type = TUNER_XC2028,
1665 .tuner_gpio = default_tuner_gpio,
1666 .decoder = EM28XX_TVP5150,
1667 .mts_firmware = 1,
1668 .has_dvb = 1,
1669 .dvb_gpio = kworld_330u_digital,
1670 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1671 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1672 EM28XX_I2C_EEPROM_ON_BOARD |
1673 EM28XX_I2C_EEPROM_KEY_VALID,
1674 .input = { {
1675 .type = EM28XX_VMUX_TELEVISION,
1676 .vmux = TVP5150_COMPOSITE0,
1677 .amux = EM28XX_AMUX_VIDEO,
1678 .gpio = kworld_330u_analog,
1679 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1680 }, {
1681 .type = EM28XX_VMUX_COMPOSITE1,
1682 .vmux = TVP5150_COMPOSITE1,
1683 .amux = EM28XX_AMUX_LINE_IN,
1684 .gpio = kworld_330u_analog,
1685 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1686 }, {
1687 .type = EM28XX_VMUX_SVIDEO,
1688 .vmux = TVP5150_SVIDEO,
1689 .amux = EM28XX_AMUX_LINE_IN,
1690 .gpio = kworld_330u_analog,
1691 } },
1692 },
1693 [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = {
1694 .name = "Compro VideoMate ForYou/Stereo",
1695 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1696 .tvaudio_addr = 0xb0,
1697 .tda9887_conf = TDA9887_PRESENT,
1698 .decoder = EM28XX_TVP5150,
1699 .adecoder = EM28XX_TVAUDIO,
1700 .mute_gpio = compro_mute_gpio,
1701 .input = { {
1702 .type = EM28XX_VMUX_TELEVISION,
1703 .vmux = TVP5150_COMPOSITE0,
1704 .amux = EM28XX_AMUX_VIDEO,
1705 .gpio = compro_unmute_tv_gpio,
1706 }, {
1707 .type = EM28XX_VMUX_SVIDEO,
1708 .vmux = TVP5150_SVIDEO,
1709 .amux = EM28XX_AMUX_LINE_IN,
1710 .gpio = compro_unmute_svid_gpio,
1711 } },
1712 },
1713 [EM2860_BOARD_KAIOMY_TVNPC_U2] = {
1714 .name = "Kaiomy TVnPC U2",
1715 .vchannels = 3,
1716 .tuner_type = TUNER_XC2028,
1717 .tuner_addr = 0x61,
1718 .mts_firmware = 1,
1719 .decoder = EM28XX_TVP5150,
1720 .tuner_gpio = default_tuner_gpio,
1721 .ir_codes = RC_MAP_KAIOMY,
1722 .input = { {
1723 .type = EM28XX_VMUX_TELEVISION,
1724 .vmux = TVP5150_COMPOSITE0,
1725 .amux = EM28XX_AMUX_VIDEO,
1726
1727 }, {
1728 .type = EM28XX_VMUX_COMPOSITE1,
1729 .vmux = TVP5150_COMPOSITE1,
1730 .amux = EM28XX_AMUX_LINE_IN,
1731 }, {
1732 .type = EM28XX_VMUX_SVIDEO,
1733 .vmux = TVP5150_SVIDEO,
1734 .amux = EM28XX_AMUX_LINE_IN,
1735 } },
1736 .radio = {
1737 .type = EM28XX_RADIO,
1738 .amux = EM28XX_AMUX_LINE_IN,
1739 }
1740 },
1741 [EM2860_BOARD_EASYCAP] = {
1742 .name = "Easy Cap Capture DC-60",
1743 .vchannels = 2,
1744 .tuner_type = TUNER_ABSENT,
1745 .decoder = EM28XX_SAA711X,
1746 .input = { {
1747 .type = EM28XX_VMUX_COMPOSITE1,
1748 .vmux = SAA7115_COMPOSITE0,
1749 .amux = EM28XX_AMUX_LINE_IN,
1750 }, {
1751 .type = EM28XX_VMUX_SVIDEO,
1752 .vmux = SAA7115_SVIDEO3,
1753 .amux = EM28XX_AMUX_LINE_IN,
1754 } },
1755 },
1756 [EM2820_BOARD_IODATA_GVMVP_SZ] = {
1757 .name = "IO-DATA GV-MVP/SZ",
1758 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
1759 .tuner_gpio = default_tuner_gpio,
1760 .tda9887_conf = TDA9887_PRESENT,
1761 .decoder = EM28XX_TVP5150,
1762 .input = { {
1763 .type = EM28XX_VMUX_TELEVISION,
1764 .vmux = TVP5150_COMPOSITE0,
1765 .amux = EM28XX_AMUX_VIDEO,
1766 }, { /* Composite has not been tested yet */
1767 .type = EM28XX_VMUX_COMPOSITE1,
1768 .vmux = TVP5150_COMPOSITE1,
1769 .amux = EM28XX_AMUX_VIDEO,
1770 }, { /* S-video has not been tested yet */
1771 .type = EM28XX_VMUX_SVIDEO,
1772 .vmux = TVP5150_SVIDEO,
1773 .amux = EM28XX_AMUX_VIDEO,
1774 } },
1775 },
1776 [EM2860_BOARD_TERRATEC_GRABBY] = {
1777 .name = "Terratec Grabby",
1778 .vchannels = 2,
1779 .tuner_type = TUNER_ABSENT,
1780 .decoder = EM28XX_SAA711X,
1781 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1782 .input = { {
1783 .type = EM28XX_VMUX_COMPOSITE1,
1784 .vmux = SAA7115_COMPOSITE0,
1785 .amux = EM28XX_AMUX_LINE_IN,
1786 }, {
1787 .type = EM28XX_VMUX_SVIDEO,
1788 .vmux = SAA7115_SVIDEO3,
1789 .amux = EM28XX_AMUX_LINE_IN,
1790 } },
1791 },
1792 [EM2860_BOARD_TERRATEC_AV350] = {
1793 .name = "Terratec AV350",
1794 .vchannels = 2,
1795 .tuner_type = TUNER_ABSENT,
1796 .decoder = EM28XX_TVP5150,
1797 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1798 .mute_gpio = terratec_av350_mute_gpio,
1799 .input = { {
1800 .type = EM28XX_VMUX_COMPOSITE1,
1801 .vmux = TVP5150_COMPOSITE1,
1802 .amux = EM28XX_AUDIO_SRC_LINE,
1803 .gpio = terratec_av350_unmute_gpio,
1804
1805 }, {
1806 .type = EM28XX_VMUX_SVIDEO,
1807 .vmux = TVP5150_SVIDEO,
1808 .amux = EM28XX_AUDIO_SRC_LINE,
1809 .gpio = terratec_av350_unmute_gpio,
1810 } },
1811 },
1812
1813 [EM2860_BOARD_ELGATO_VIDEO_CAPTURE] = {
1814 .name = "Elgato Video Capture",
1815 .decoder = EM28XX_SAA711X,
1816 .tuner_type = TUNER_ABSENT, /* Capture only device */
1817 .input = { {
1818 .type = EM28XX_VMUX_COMPOSITE1,
1819 .vmux = SAA7115_COMPOSITE0,
1820 .amux = EM28XX_AMUX_LINE_IN,
1821 }, {
1822 .type = EM28XX_VMUX_SVIDEO,
1823 .vmux = SAA7115_SVIDEO3,
1824 .amux = EM28XX_AMUX_LINE_IN,
1825 } },
1826 },
1827
1828 [EM2882_BOARD_EVGA_INDTUBE] = {
1829 .name = "Evga inDtube",
1830 .tuner_type = TUNER_XC2028,
1831 .tuner_gpio = default_tuner_gpio,
1832 .decoder = EM28XX_TVP5150,
1833 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1834 .mts_firmware = 1,
1835 .has_dvb = 1,
1836 .dvb_gpio = evga_indtube_digital,
1837 .ir_codes = RC_MAP_EVGA_INDTUBE,
1838 .input = { {
1839 .type = EM28XX_VMUX_TELEVISION,
1840 .vmux = TVP5150_COMPOSITE0,
1841 .amux = EM28XX_AMUX_VIDEO,
1842 .gpio = evga_indtube_analog,
1843 }, {
1844 .type = EM28XX_VMUX_COMPOSITE1,
1845 .vmux = TVP5150_COMPOSITE1,
1846 .amux = EM28XX_AMUX_LINE_IN,
1847 .gpio = evga_indtube_analog,
1848 }, {
1849 .type = EM28XX_VMUX_SVIDEO,
1850 .vmux = TVP5150_SVIDEO,
1851 .amux = EM28XX_AMUX_LINE_IN,
1852 .gpio = evga_indtube_analog,
1853 } },
1854 },
1855 /* eb1a:2868 Empia EM2870 + Philips CU1216L NIM (Philips TDA10023 +
1856 Infineon TUA6034) */
1857 [EM2870_BOARD_REDDO_DVB_C_USB_BOX] = {
1858 .name = "Reddo DVB-C USB TV Box",
1859 .tuner_type = TUNER_ABSENT,
1860 .tuner_gpio = reddo_dvb_c_usb_box,
1861 .has_dvb = 1,
1862 },
1863 /* 1b80:a340 - Empia EM2870, NXP TDA18271HD and LG DT3304, sold
1864 * initially as the KWorld PlusTV 340U, then as the UB435-Q.
1865 * Early variants have a TDA18271HD/C1, later ones a TDA18271HD/C2 */
1866 [EM2870_BOARD_KWORLD_A340] = {
1867 .name = "KWorld PlusTV 340U or UB435-Q (ATSC)",
1868 .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */
1869 .has_dvb = 1,
1870 .dvb_gpio = kworld_a340_digital,
1871 .tuner_gpio = default_tuner_gpio,
1872 },
1873 /* 2013:024f PCTV nanoStick T2 290e.
1874 * Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2 */
1875 [EM28174_BOARD_PCTV_290E] = {
1876 .name = "PCTV nanoStick T2 290e",
1877 .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
1878 EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ,
1879 .tuner_type = TUNER_ABSENT,
1880 .tuner_gpio = pctv_290e,
1881 .has_dvb = 1,
1882 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
1883 },
1884 /* 2013:024f PCTV DVB-S2 Stick 460e
1885 * Empia EM28174, NXP TDA10071, Conexant CX24118A and Allegro A8293 */
1886 [EM28174_BOARD_PCTV_460E] = {
1887 .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
1888 EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ,
1889 .name = "PCTV DVB-S2 Stick (460e)",
1890 .tuner_type = TUNER_ABSENT,
1891 .tuner_gpio = pctv_460e,
1892 .has_dvb = 1,
1893 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
1894 },
1895 /* eb1a:5006 Honestech VIDBOX NW03
1896 * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner */
1897 [EM2860_BOARD_HT_VIDBOX_NW03] = {
1898 .name = "Honestech Vidbox NW03",
1899 .tuner_type = TUNER_ABSENT,
1900 .decoder = EM28XX_SAA711X,
1901 .input = { {
1902 .type = EM28XX_VMUX_COMPOSITE1,
1903 .vmux = SAA7115_COMPOSITE0,
1904 .amux = EM28XX_AMUX_LINE_IN,
1905 }, {
1906 .type = EM28XX_VMUX_SVIDEO,
1907 .vmux = SAA7115_SVIDEO3, /* S-VIDEO needs confirming */
1908 .amux = EM28XX_AMUX_LINE_IN,
1909 } },
1910 },
1911 };
1912 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
1913
1914 /* table of devices that work with this driver */
1915 struct usb_device_id em28xx_id_table[] = {
1916 { USB_DEVICE(0xeb1a, 0x2750),
1917 .driver_info = EM2750_BOARD_UNKNOWN },
1918 { USB_DEVICE(0xeb1a, 0x2751),
1919 .driver_info = EM2750_BOARD_UNKNOWN },
1920 { USB_DEVICE(0xeb1a, 0x2800),
1921 .driver_info = EM2800_BOARD_UNKNOWN },
1922 { USB_DEVICE(0xeb1a, 0x2710),
1923 .driver_info = EM2820_BOARD_UNKNOWN },
1924 { USB_DEVICE(0xeb1a, 0x2820),
1925 .driver_info = EM2820_BOARD_UNKNOWN },
1926 { USB_DEVICE(0xeb1a, 0x2821),
1927 .driver_info = EM2820_BOARD_UNKNOWN },
1928 { USB_DEVICE(0xeb1a, 0x2860),
1929 .driver_info = EM2820_BOARD_UNKNOWN },
1930 { USB_DEVICE(0xeb1a, 0x2861),
1931 .driver_info = EM2820_BOARD_UNKNOWN },
1932 { USB_DEVICE(0xeb1a, 0x2862),
1933 .driver_info = EM2820_BOARD_UNKNOWN },
1934 { USB_DEVICE(0xeb1a, 0x2863),
1935 .driver_info = EM2820_BOARD_UNKNOWN },
1936 { USB_DEVICE(0xeb1a, 0x2870),
1937 .driver_info = EM2820_BOARD_UNKNOWN },
1938 { USB_DEVICE(0xeb1a, 0x2881),
1939 .driver_info = EM2820_BOARD_UNKNOWN },
1940 { USB_DEVICE(0xeb1a, 0x2883),
1941 .driver_info = EM2820_BOARD_UNKNOWN },
1942 { USB_DEVICE(0xeb1a, 0x2868),
1943 .driver_info = EM2820_BOARD_UNKNOWN },
1944 { USB_DEVICE(0xeb1a, 0x2875),
1945 .driver_info = EM2820_BOARD_UNKNOWN },
1946 { USB_DEVICE(0xeb1a, 0xe300),
1947 .driver_info = EM2861_BOARD_KWORLD_PVRTV_300U },
1948 { USB_DEVICE(0xeb1a, 0xe303),
1949 .driver_info = EM2860_BOARD_KAIOMY_TVNPC_U2 },
1950 { USB_DEVICE(0xeb1a, 0xe305),
1951 .driver_info = EM2880_BOARD_KWORLD_DVB_305U },
1952 { USB_DEVICE(0xeb1a, 0xe310),
1953 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD },
1954 { USB_DEVICE(0xeb1a, 0xa313),
1955 .driver_info = EM2882_BOARD_KWORLD_ATSC_315U },
1956 { USB_DEVICE(0xeb1a, 0xa316),
1957 .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U },
1958 { USB_DEVICE(0xeb1a, 0xe320),
1959 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II },
1960 { USB_DEVICE(0xeb1a, 0xe323),
1961 .driver_info = EM2882_BOARD_KWORLD_VS_DVBT },
1962 { USB_DEVICE(0xeb1a, 0xe350),
1963 .driver_info = EM2870_BOARD_KWORLD_350U },
1964 { USB_DEVICE(0xeb1a, 0xe355),
1965 .driver_info = EM2870_BOARD_KWORLD_355U },
1966 { USB_DEVICE(0xeb1a, 0x2801),
1967 .driver_info = EM2800_BOARD_GRABBEEX_USB2800 },
1968 { USB_DEVICE(0xeb1a, 0xe357),
1969 .driver_info = EM2870_BOARD_KWORLD_355U },
1970 { USB_DEVICE(0xeb1a, 0xe359),
1971 .driver_info = EM2870_BOARD_KWORLD_355U },
1972 { USB_DEVICE(0x1b80, 0xe302),
1973 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kaiser Baas Video to DVD maker */
1974 { USB_DEVICE(0x1b80, 0xe304),
1975 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kworld DVD Maker 2 */
1976 { USB_DEVICE(0x0ccd, 0x0036),
1977 .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 },
1978 { USB_DEVICE(0x0ccd, 0x004c),
1979 .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR },
1980 { USB_DEVICE(0x0ccd, 0x004f),
1981 .driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS },
1982 { USB_DEVICE(0x0ccd, 0x005e),
1983 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
1984 { USB_DEVICE(0x0ccd, 0x0042),
1985 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
1986 { USB_DEVICE(0x0ccd, 0x0043),
1987 .driver_info = EM2870_BOARD_TERRATEC_XS },
1988 { USB_DEVICE(0x0ccd, 0x008e), /* Cinergy HTC USB XS Rev. 1 */
1989 .driver_info = EM2884_BOARD_TERRATEC_H5 },
1990 { USB_DEVICE(0x0ccd, 0x00ac), /* Cinergy HTC USB XS Rev. 2 */
1991 .driver_info = EM2884_BOARD_TERRATEC_H5 },
1992 { USB_DEVICE(0x0ccd, 0x10a2), /* H5 Rev. 1 */
1993 .driver_info = EM2884_BOARD_TERRATEC_H5 },
1994 { USB_DEVICE(0x0ccd, 0x10ad), /* H5 Rev. 2 */
1995 .driver_info = EM2884_BOARD_TERRATEC_H5 },
1996 { USB_DEVICE(0x0ccd, 0x0084),
1997 .driver_info = EM2860_BOARD_TERRATEC_AV350 },
1998 { USB_DEVICE(0x0ccd, 0x0096),
1999 .driver_info = EM2860_BOARD_TERRATEC_GRABBY },
2000 { USB_DEVICE(0x0ccd, 0x10AF),
2001 .driver_info = EM2860_BOARD_TERRATEC_GRABBY },
2002 { USB_DEVICE(0x0ccd, 0x00b2),
2003 .driver_info = EM2884_BOARD_CINERGY_HTC_STICK },
2004 { USB_DEVICE(0x0fd9, 0x0033),
2005 .driver_info = EM2860_BOARD_ELGATO_VIDEO_CAPTURE},
2006 { USB_DEVICE(0x185b, 0x2870),
2007 .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE },
2008 { USB_DEVICE(0x185b, 0x2041),
2009 .driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU },
2010 { USB_DEVICE(0x2040, 0x4200),
2011 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
2012 { USB_DEVICE(0x2040, 0x4201),
2013 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
2014 { USB_DEVICE(0x2040, 0x6500),
2015 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 },
2016 { USB_DEVICE(0x2040, 0x6502),
2017 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 },
2018 { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */
2019 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
2020 { USB_DEVICE(0x2040, 0x6517), /* HP HVR-950 */
2021 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
2022 { USB_DEVICE(0x2040, 0x651b), /* RP HVR-950 */
2023 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
2024 { USB_DEVICE(0x2040, 0x651f),
2025 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 },
2026 { USB_DEVICE(0x0438, 0xb002),
2027 .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 },
2028 { USB_DEVICE(0x2001, 0xf112),
2029 .driver_info = EM2820_BOARD_DLINK_USB_TV },
2030 { USB_DEVICE(0x2304, 0x0207),
2031 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
2032 { USB_DEVICE(0x2304, 0x0208),
2033 .driver_info = EM2820_BOARD_PINNACLE_USB_2 },
2034 { USB_DEVICE(0x2304, 0x021a),
2035 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
2036 { USB_DEVICE(0x2304, 0x0226),
2037 .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO_330E },
2038 { USB_DEVICE(0x2304, 0x0227),
2039 .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO },
2040 { USB_DEVICE(0x0413, 0x6023),
2041 .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII },
2042 { USB_DEVICE(0x093b, 0xa003),
2043 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
2044 { USB_DEVICE(0x093b, 0xa005),
2045 .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U },
2046 { USB_DEVICE(0x04bb, 0x0515),
2047 .driver_info = EM2820_BOARD_IODATA_GVMVP_SZ },
2048 { USB_DEVICE(0xeb1a, 0x50a6),
2049 .driver_info = EM2860_BOARD_GADMEI_UTV330 },
2050 { USB_DEVICE(0x1b80, 0xa340),
2051 .driver_info = EM2870_BOARD_KWORLD_A340 },
2052 { USB_DEVICE(0x2013, 0x024f),
2053 .driver_info = EM28174_BOARD_PCTV_290E },
2054 { USB_DEVICE(0x2013, 0x024c),
2055 .driver_info = EM28174_BOARD_PCTV_460E },
2056 { USB_DEVICE(0x2040, 0x1605),
2057 .driver_info = EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C },
2058 { USB_DEVICE(0xeb1a, 0x5006),
2059 .driver_info = EM2860_BOARD_HT_VIDBOX_NW03 },
2060 { USB_DEVICE(0x1b80, 0xe309), /* Sveon STV40 */
2061 .driver_info = EM2860_BOARD_EASYCAP },
2062 { },
2063 };
2064 MODULE_DEVICE_TABLE(usb, em28xx_id_table);
2065
2066 /*
2067 * EEPROM hash table for devices with generic USB IDs
2068 */
2069 static struct em28xx_hash_table em28xx_eeprom_hash[] = {
2070 /* P/N: SA 60002070465 Tuner: TVF7533-MF */
2071 {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF},
2072 {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF},
2073 {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028},
2074 {0x166a0441, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028},
2075 {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028},
2076 {0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028},
2077 {0x63f653bd, EM2870_BOARD_REDDO_DVB_C_USB_BOX, TUNER_ABSENT},
2078 {0x4e913442, EM2882_BOARD_DIKOM_DK300, TUNER_XC2028},
2079 };
2080
2081 /* I2C devicelist hash table for devices with generic USB IDs */
2082 static struct em28xx_hash_table em28xx_i2c_hash[] = {
2083 {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC},
2084 {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC},
2085 {0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT},
2086 {0x77800080, EM2860_BOARD_TVP5150_REFERENCE_DESIGN, TUNER_ABSENT},
2087 {0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC},
2088 {0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF},
2089 {0x6b800080, EM2874_BOARD_LEADERSHIP_ISDBT, TUNER_ABSENT},
2090 };
2091
2092 /* I2C possible address to saa7115, tvp5150, msp3400, tvaudio */
2093 static unsigned short saa711x_addrs[] = {
2094 0x4a >> 1, 0x48 >> 1, /* SAA7111, SAA7111A and SAA7113 */
2095 0x42 >> 1, 0x40 >> 1, /* SAA7114, SAA7115 and SAA7118 */
2096 I2C_CLIENT_END };
2097
2098 static unsigned short tvp5150_addrs[] = {
2099 0xb8 >> 1,
2100 0xba >> 1,
2101 I2C_CLIENT_END
2102 };
2103
2104 static unsigned short msp3400_addrs[] = {
2105 0x80 >> 1,
2106 0x88 >> 1,
2107 I2C_CLIENT_END
2108 };
2109
em28xx_tuner_callback(void * ptr,int component,int command,int arg)2110 int em28xx_tuner_callback(void *ptr, int component, int command, int arg)
2111 {
2112 int rc = 0;
2113 struct em28xx *dev = ptr;
2114
2115 if (dev->tuner_type != TUNER_XC2028 && dev->tuner_type != TUNER_XC5000)
2116 return 0;
2117
2118 if (command != XC2028_TUNER_RESET && command != XC5000_TUNER_RESET)
2119 return 0;
2120
2121 rc = em28xx_gpio_set(dev, dev->board.tuner_gpio);
2122
2123 return rc;
2124 }
2125 EXPORT_SYMBOL_GPL(em28xx_tuner_callback);
2126
em28xx_set_model(struct em28xx * dev)2127 static inline void em28xx_set_model(struct em28xx *dev)
2128 {
2129 memcpy(&dev->board, &em28xx_boards[dev->model], sizeof(dev->board));
2130
2131 /* Those are the default values for the majority of boards
2132 Use those values if not specified otherwise at boards entry
2133 */
2134 if (!dev->board.xclk)
2135 dev->board.xclk = EM28XX_XCLK_IR_RC5_MODE |
2136 EM28XX_XCLK_FREQUENCY_12MHZ;
2137
2138 if (!dev->board.i2c_speed)
2139 dev->board.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2140 EM28XX_I2C_FREQ_100_KHZ;
2141 }
2142
2143
2144 /* FIXME: Should be replaced by a proper mt9m111 driver */
em28xx_initialize_mt9m111(struct em28xx * dev)2145 static int em28xx_initialize_mt9m111(struct em28xx *dev)
2146 {
2147 int i;
2148 unsigned char regs[][3] = {
2149 { 0x0d, 0x00, 0x01, }, /* reset and use defaults */
2150 { 0x0d, 0x00, 0x00, },
2151 { 0x0a, 0x00, 0x21, },
2152 { 0x21, 0x04, 0x00, }, /* full readout speed, no row/col skipping */
2153 };
2154
2155 for (i = 0; i < ARRAY_SIZE(regs); i++)
2156 i2c_master_send(&dev->i2c_client, ®s[i][0], 3);
2157
2158 return 0;
2159 }
2160
2161
2162 /* FIXME: Should be replaced by a proper mt9m001 driver */
em28xx_initialize_mt9m001(struct em28xx * dev)2163 static int em28xx_initialize_mt9m001(struct em28xx *dev)
2164 {
2165 int i;
2166 unsigned char regs[][3] = {
2167 { 0x0d, 0x00, 0x01, },
2168 { 0x0d, 0x00, 0x00, },
2169 { 0x04, 0x05, 0x00, }, /* hres = 1280 */
2170 { 0x03, 0x04, 0x00, }, /* vres = 1024 */
2171 { 0x20, 0x11, 0x00, },
2172 { 0x06, 0x00, 0x10, },
2173 { 0x2b, 0x00, 0x24, },
2174 { 0x2e, 0x00, 0x24, },
2175 { 0x35, 0x00, 0x24, },
2176 { 0x2d, 0x00, 0x20, },
2177 { 0x2c, 0x00, 0x20, },
2178 { 0x09, 0x0a, 0xd4, },
2179 { 0x35, 0x00, 0x57, },
2180 };
2181
2182 for (i = 0; i < ARRAY_SIZE(regs); i++)
2183 i2c_master_send(&dev->i2c_client, ®s[i][0], 3);
2184
2185 return 0;
2186 }
2187
2188 /* HINT method: webcam I2C chips
2189 *
2190 * This method works for webcams with Micron sensors
2191 */
em28xx_hint_sensor(struct em28xx * dev)2192 static int em28xx_hint_sensor(struct em28xx *dev)
2193 {
2194 int rc;
2195 char *sensor_name;
2196 unsigned char cmd;
2197 __be16 version_be;
2198 u16 version;
2199
2200 /* Micron sensor detection */
2201 dev->i2c_client.addr = 0xba >> 1;
2202 cmd = 0;
2203 i2c_master_send(&dev->i2c_client, &cmd, 1);
2204 rc = i2c_master_recv(&dev->i2c_client, (char *)&version_be, 2);
2205 if (rc != 2)
2206 return -EINVAL;
2207
2208 version = be16_to_cpu(version_be);
2209 switch (version) {
2210 case 0x8232: /* mt9v011 640x480 1.3 Mpix sensor */
2211 case 0x8243: /* mt9v011 rev B 640x480 1.3 Mpix sensor */
2212 dev->model = EM2820_BOARD_SILVERCREST_WEBCAM;
2213 em28xx_set_model(dev);
2214
2215 sensor_name = "mt9v011";
2216 dev->em28xx_sensor = EM28XX_MT9V011;
2217 dev->sensor_xres = 640;
2218 dev->sensor_yres = 480;
2219 /*
2220 * FIXME: mt9v011 uses I2S speed as xtal clk - at least with
2221 * the Silvercrest cam I have here for testing - for higher
2222 * resolutions, a high clock cause horizontal artifacts, so we
2223 * need to use a lower xclk frequency.
2224 * Yet, it would be possible to adjust xclk depending on the
2225 * desired resolution, since this affects directly the
2226 * frame rate.
2227 */
2228 dev->board.xclk = EM28XX_XCLK_FREQUENCY_4_3MHZ;
2229 dev->sensor_xtal = 4300000;
2230
2231 /* probably means GRGB 16 bit bayer */
2232 dev->vinmode = 0x0d;
2233 dev->vinctl = 0x00;
2234
2235 break;
2236
2237 case 0x143a: /* MT9M111 as found in the ECS G200 */
2238 dev->model = EM2750_BOARD_UNKNOWN;
2239 em28xx_set_model(dev);
2240
2241 sensor_name = "mt9m111";
2242 dev->board.xclk = EM28XX_XCLK_FREQUENCY_48MHZ;
2243 dev->em28xx_sensor = EM28XX_MT9M111;
2244 em28xx_initialize_mt9m111(dev);
2245 dev->sensor_xres = 640;
2246 dev->sensor_yres = 512;
2247
2248 dev->vinmode = 0x0a;
2249 dev->vinctl = 0x00;
2250
2251 break;
2252
2253 case 0x8431:
2254 dev->model = EM2750_BOARD_UNKNOWN;
2255 em28xx_set_model(dev);
2256
2257 sensor_name = "mt9m001";
2258 dev->em28xx_sensor = EM28XX_MT9M001;
2259 em28xx_initialize_mt9m001(dev);
2260 dev->sensor_xres = 1280;
2261 dev->sensor_yres = 1024;
2262
2263 /* probably means BGGR 16 bit bayer */
2264 dev->vinmode = 0x0c;
2265 dev->vinctl = 0x00;
2266
2267 break;
2268 default:
2269 printk("Unknown Micron Sensor 0x%04x\n", version);
2270 return -EINVAL;
2271 }
2272
2273 /* Setup webcam defaults */
2274 em28xx_pre_card_setup(dev);
2275
2276 em28xx_errdev("Sensor is %s, using model %s entry.\n",
2277 sensor_name, em28xx_boards[dev->model].name);
2278
2279 return 0;
2280 }
2281
2282 /* Since em28xx_pre_card_setup() requires a proper dev->model,
2283 * this won't work for boards with generic PCI IDs
2284 */
em28xx_pre_card_setup(struct em28xx * dev)2285 void em28xx_pre_card_setup(struct em28xx *dev)
2286 {
2287 /* Set the initial XCLK and I2C clock values based on the board
2288 definition */
2289 em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f);
2290 if (!dev->board.is_em2800)
2291 em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
2292 msleep(50);
2293
2294 /* request some modules */
2295 switch (dev->model) {
2296 case EM2861_BOARD_PLEXTOR_PX_TV100U:
2297 /* Sets the msp34xx I2S speed */
2298 dev->i2s_speed = 2048000;
2299 break;
2300 case EM2861_BOARD_KWORLD_PVRTV_300U:
2301 case EM2880_BOARD_KWORLD_DVB_305U:
2302 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x6d);
2303 msleep(10);
2304 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x7d);
2305 msleep(10);
2306 break;
2307 case EM2870_BOARD_COMPRO_VIDEOMATE:
2308 /* TODO: someone can do some cleanup here...
2309 not everything's needed */
2310 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
2311 msleep(10);
2312 em28xx_write_reg(dev, EM2880_R04_GPO, 0x01);
2313 msleep(10);
2314 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2315 mdelay(70);
2316 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
2317 mdelay(70);
2318 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xdc);
2319 mdelay(70);
2320 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
2321 mdelay(70);
2322 break;
2323 case EM2870_BOARD_TERRATEC_XS_MT2060:
2324 /* this device needs some gpio writes to get the DVB-T
2325 demod work */
2326 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2327 mdelay(70);
2328 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
2329 mdelay(70);
2330 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2331 mdelay(70);
2332 break;
2333 case EM2870_BOARD_PINNACLE_PCTV_DVB:
2334 /* this device needs some gpio writes to get the
2335 DVB-T demod work */
2336 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2337 mdelay(70);
2338 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
2339 mdelay(70);
2340 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2341 mdelay(70);
2342 break;
2343 case EM2820_BOARD_GADMEI_UTV310:
2344 case EM2820_BOARD_MSI_VOX_USB_2:
2345 /* enables audio for that devices */
2346 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2347 break;
2348
2349 case EM2882_BOARD_KWORLD_ATSC_315U:
2350 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
2351 msleep(10);
2352 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2353 msleep(10);
2354 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
2355 msleep(10);
2356 em28xx_write_reg(dev, EM2880_R04_GPO, 0x08);
2357 msleep(10);
2358 break;
2359
2360 case EM2860_BOARD_KAIOMY_TVNPC_U2:
2361 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1);
2362 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
2363 em28xx_write_regs(dev, 0x0d, "\x42", 1);
2364 em28xx_write_regs(dev, 0x08, "\xfd", 1);
2365 msleep(10);
2366 em28xx_write_regs(dev, 0x08, "\xff", 1);
2367 msleep(10);
2368 em28xx_write_regs(dev, 0x08, "\x7f", 1);
2369 msleep(10);
2370 em28xx_write_regs(dev, 0x08, "\x6b", 1);
2371
2372 break;
2373 case EM2860_BOARD_EASYCAP:
2374 em28xx_write_regs(dev, 0x08, "\xf8", 1);
2375 break;
2376
2377 case EM2820_BOARD_IODATA_GVMVP_SZ:
2378 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
2379 msleep(70);
2380 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
2381 msleep(10);
2382 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2383 msleep(70);
2384 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2385 msleep(70);
2386 break;
2387 }
2388
2389 em28xx_gpio_set(dev, dev->board.tuner_gpio);
2390 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
2391
2392 /* Unlock device */
2393 em28xx_set_mode(dev, EM28XX_SUSPEND);
2394 }
2395
em28xx_setup_xc3028(struct em28xx * dev,struct xc2028_ctrl * ctl)2396 static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
2397 {
2398 memset(ctl, 0, sizeof(*ctl));
2399
2400 ctl->fname = XC2028_DEFAULT_FIRMWARE;
2401 ctl->max_len = 64;
2402 ctl->mts = em28xx_boards[dev->model].mts_firmware;
2403
2404 switch (dev->model) {
2405 case EM2880_BOARD_EMPIRE_DUAL_TV:
2406 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
2407 case EM2882_BOARD_TERRATEC_HYBRID_XS:
2408 ctl->demod = XC3028_FE_ZARLINK456;
2409 break;
2410 case EM2880_BOARD_TERRATEC_HYBRID_XS:
2411 case EM2880_BOARD_TERRATEC_HYBRID_XS_FR:
2412 case EM2881_BOARD_PINNACLE_HYBRID_PRO:
2413 ctl->demod = XC3028_FE_ZARLINK456;
2414 break;
2415 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
2416 case EM2882_BOARD_PINNACLE_HYBRID_PRO_330E:
2417 ctl->demod = XC3028_FE_DEFAULT;
2418 break;
2419 case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
2420 ctl->demod = XC3028_FE_DEFAULT;
2421 ctl->fname = XC3028L_DEFAULT_FIRMWARE;
2422 break;
2423 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
2424 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
2425 case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
2426 /* FIXME: Better to specify the needed IF */
2427 ctl->demod = XC3028_FE_DEFAULT;
2428 break;
2429 case EM2883_BOARD_KWORLD_HYBRID_330U:
2430 case EM2882_BOARD_DIKOM_DK300:
2431 case EM2882_BOARD_KWORLD_VS_DVBT:
2432 ctl->demod = XC3028_FE_CHINA;
2433 ctl->fname = XC2028_DEFAULT_FIRMWARE;
2434 break;
2435 case EM2882_BOARD_EVGA_INDTUBE:
2436 ctl->demod = XC3028_FE_CHINA;
2437 ctl->fname = XC3028L_DEFAULT_FIRMWARE;
2438 break;
2439 default:
2440 ctl->demod = XC3028_FE_OREN538;
2441 }
2442 }
2443
em28xx_tuner_setup(struct em28xx * dev)2444 static void em28xx_tuner_setup(struct em28xx *dev)
2445 {
2446 struct tuner_setup tun_setup;
2447 struct v4l2_frequency f;
2448
2449 if (dev->tuner_type == TUNER_ABSENT)
2450 return;
2451
2452 memset(&tun_setup, 0, sizeof(tun_setup));
2453
2454 tun_setup.mode_mask = T_ANALOG_TV | T_RADIO;
2455 tun_setup.tuner_callback = em28xx_tuner_callback;
2456
2457 if (dev->board.radio.type) {
2458 tun_setup.type = dev->board.radio.type;
2459 tun_setup.addr = dev->board.radio_addr;
2460
2461 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
2462 }
2463
2464 if ((dev->tuner_type != TUNER_ABSENT) && (dev->tuner_type)) {
2465 tun_setup.type = dev->tuner_type;
2466 tun_setup.addr = dev->tuner_addr;
2467
2468 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
2469 }
2470
2471 if (dev->tda9887_conf) {
2472 struct v4l2_priv_tun_config tda9887_cfg;
2473
2474 tda9887_cfg.tuner = TUNER_TDA9887;
2475 tda9887_cfg.priv = &dev->tda9887_conf;
2476
2477 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &tda9887_cfg);
2478 }
2479
2480 if (dev->tuner_type == TUNER_XC2028) {
2481 struct v4l2_priv_tun_config xc2028_cfg;
2482 struct xc2028_ctrl ctl;
2483
2484 memset(&xc2028_cfg, 0, sizeof(xc2028_cfg));
2485 memset(&ctl, 0, sizeof(ctl));
2486
2487 em28xx_setup_xc3028(dev, &ctl);
2488
2489 xc2028_cfg.tuner = TUNER_XC2028;
2490 xc2028_cfg.priv = &ctl;
2491
2492 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &xc2028_cfg);
2493 }
2494
2495 /* configure tuner */
2496 f.tuner = 0;
2497 f.type = V4L2_TUNER_ANALOG_TV;
2498 f.frequency = 9076; /* just a magic number */
2499 dev->ctl_freq = f.frequency;
2500 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f);
2501 }
2502
em28xx_hint_board(struct em28xx * dev)2503 static int em28xx_hint_board(struct em28xx *dev)
2504 {
2505 int i;
2506
2507 /* HINT method: EEPROM
2508 *
2509 * This method works only for boards with eeprom.
2510 * Uses a hash of all eeprom bytes. The hash should be
2511 * unique for a vendor/tuner pair.
2512 * There are a high chance that tuners for different
2513 * video standards produce different hashes.
2514 */
2515 for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) {
2516 if (dev->hash == em28xx_eeprom_hash[i].hash) {
2517 dev->model = em28xx_eeprom_hash[i].model;
2518 dev->tuner_type = em28xx_eeprom_hash[i].tuner;
2519
2520 em28xx_errdev("Your board has no unique USB ID.\n");
2521 em28xx_errdev("A hint were successfully done, "
2522 "based on eeprom hash.\n");
2523 em28xx_errdev("This method is not 100%% failproof.\n");
2524 em28xx_errdev("If the board were missdetected, "
2525 "please email this log to:\n");
2526 em28xx_errdev("\tV4L Mailing List "
2527 " <linux-media@vger.kernel.org>\n");
2528 em28xx_errdev("Board detected as %s\n",
2529 em28xx_boards[dev->model].name);
2530
2531 return 0;
2532 }
2533 }
2534
2535 /* HINT method: I2C attached devices
2536 *
2537 * This method works for all boards.
2538 * Uses a hash of i2c scanned devices.
2539 * Devices with the same i2c attached chips will
2540 * be considered equal.
2541 * This method is less precise than the eeprom one.
2542 */
2543
2544 /* user did not request i2c scanning => do it now */
2545 if (!dev->i2c_hash)
2546 em28xx_do_i2c_scan(dev);
2547
2548 for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) {
2549 if (dev->i2c_hash == em28xx_i2c_hash[i].hash) {
2550 dev->model = em28xx_i2c_hash[i].model;
2551 dev->tuner_type = em28xx_i2c_hash[i].tuner;
2552 em28xx_errdev("Your board has no unique USB ID.\n");
2553 em28xx_errdev("A hint were successfully done, "
2554 "based on i2c devicelist hash.\n");
2555 em28xx_errdev("This method is not 100%% failproof.\n");
2556 em28xx_errdev("If the board were missdetected, "
2557 "please email this log to:\n");
2558 em28xx_errdev("\tV4L Mailing List "
2559 " <linux-media@vger.kernel.org>\n");
2560 em28xx_errdev("Board detected as %s\n",
2561 em28xx_boards[dev->model].name);
2562
2563 return 0;
2564 }
2565 }
2566
2567 em28xx_errdev("Your board has no unique USB ID and thus need a "
2568 "hint to be detected.\n");
2569 em28xx_errdev("You may try to use card=<n> insmod option to "
2570 "workaround that.\n");
2571 em28xx_errdev("Please send an email with this log to:\n");
2572 em28xx_errdev("\tV4L Mailing List <linux-media@vger.kernel.org>\n");
2573 em28xx_errdev("Board eeprom hash is 0x%08lx\n", dev->hash);
2574 em28xx_errdev("Board i2c devicelist hash is 0x%08lx\n", dev->i2c_hash);
2575
2576 em28xx_errdev("Here is a list of valid choices for the card=<n>"
2577 " insmod option:\n");
2578 for (i = 0; i < em28xx_bcount; i++) {
2579 em28xx_errdev(" card=%d -> %s\n",
2580 i, em28xx_boards[i].name);
2581 }
2582 return -1;
2583 }
2584
2585 /* ----------------------------------------------------------------------- */
em28xx_register_i2c_ir(struct em28xx * dev)2586 void em28xx_register_i2c_ir(struct em28xx *dev)
2587 {
2588 /* Leadtek winfast tv USBII deluxe can find a non working IR-device */
2589 /* at address 0x18, so if that address is needed for another board in */
2590 /* the future, please put it after 0x1f. */
2591 struct i2c_board_info info;
2592 const unsigned short addr_list[] = {
2593 0x1f, 0x30, 0x47, I2C_CLIENT_END
2594 };
2595
2596 if (disable_ir)
2597 return;
2598
2599 memset(&info, 0, sizeof(struct i2c_board_info));
2600 memset(&dev->init_data, 0, sizeof(dev->init_data));
2601 strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
2602
2603 /* detect & configure */
2604 switch (dev->model) {
2605 case EM2800_BOARD_TERRATEC_CINERGY_200:
2606 case EM2820_BOARD_TERRATEC_CINERGY_250:
2607 dev->init_data.ir_codes = RC_MAP_EM_TERRATEC;
2608 dev->init_data.get_key = em28xx_get_key_terratec;
2609 dev->init_data.name = "i2c IR (EM28XX Terratec)";
2610 break;
2611 case EM2820_BOARD_PINNACLE_USB_2:
2612 dev->init_data.ir_codes = RC_MAP_PINNACLE_GREY;
2613 dev->init_data.get_key = em28xx_get_key_pinnacle_usb_grey;
2614 dev->init_data.name = "i2c IR (EM28XX Pinnacle PCTV)";
2615 break;
2616 case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
2617 dev->init_data.ir_codes = RC_MAP_HAUPPAUGE;
2618 dev->init_data.get_key = em28xx_get_key_em_haup;
2619 dev->init_data.name = "i2c IR (EM2840 Hauppauge)";
2620 break;
2621 case EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE:
2622 dev->init_data.ir_codes = RC_MAP_WINFAST_USBII_DELUXE;
2623 dev->init_data.get_key = em28xx_get_key_winfast_usbii_deluxe;
2624 dev->init_data.name = "i2c IR (EM2820 Winfast TV USBII Deluxe)";
2625 break;
2626 }
2627
2628 if (dev->init_data.name)
2629 info.platform_data = &dev->init_data;
2630 i2c_new_probed_device(&dev->i2c_adap, &info, addr_list, NULL);
2631 }
2632
em28xx_card_setup(struct em28xx * dev)2633 void em28xx_card_setup(struct em28xx *dev)
2634 {
2635 /*
2636 * If the device can be a webcam, seek for a sensor.
2637 * If sensor is not found, then it isn't a webcam.
2638 */
2639 if (dev->board.is_webcam) {
2640 if (em28xx_hint_sensor(dev) < 0)
2641 dev->board.is_webcam = 0;
2642 else
2643 dev->progressive = 1;
2644 }
2645
2646 if (!dev->board.is_webcam) {
2647 switch (dev->model) {
2648 case EM2820_BOARD_UNKNOWN:
2649 case EM2800_BOARD_UNKNOWN:
2650 /*
2651 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
2652 *
2653 * This occurs because they share identical USB vendor and
2654 * product IDs.
2655 *
2656 * What we do here is look up the EEPROM hash of the K-WORLD
2657 * and if it is found then we decide that we do not have
2658 * a DIGIVOX and reset the device to the K-WORLD instead.
2659 *
2660 * This solution is only valid if they do not share eeprom
2661 * hash identities which has not been determined as yet.
2662 */
2663 if (em28xx_hint_board(dev) < 0)
2664 em28xx_errdev("Board not discovered\n");
2665 else {
2666 em28xx_set_model(dev);
2667 em28xx_pre_card_setup(dev);
2668 }
2669 break;
2670 default:
2671 em28xx_set_model(dev);
2672 }
2673 }
2674
2675 em28xx_info("Identified as %s (card=%d)\n",
2676 dev->board.name, dev->model);
2677
2678 dev->tuner_type = em28xx_boards[dev->model].tuner_type;
2679 if (em28xx_boards[dev->model].tuner_addr)
2680 dev->tuner_addr = em28xx_boards[dev->model].tuner_addr;
2681
2682 if (em28xx_boards[dev->model].tda9887_conf)
2683 dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf;
2684
2685 /* request some modules */
2686 switch (dev->model) {
2687 case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
2688 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
2689 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
2690 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
2691 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
2692 {
2693 struct tveeprom tv;
2694 #if defined(CONFIG_MODULES) && defined(MODULE)
2695 request_module("tveeprom");
2696 #endif
2697 /* Call first TVeeprom */
2698
2699 dev->i2c_client.addr = 0xa0 >> 1;
2700 tveeprom_hauppauge_analog(&dev->i2c_client, &tv, dev->eedata);
2701
2702 dev->tuner_type = tv.tuner_type;
2703
2704 if (tv.audio_processor == V4L2_IDENT_MSPX4XX) {
2705 dev->i2s_speed = 2048000;
2706 dev->board.has_msp34xx = 1;
2707 }
2708 break;
2709 }
2710 case EM2882_BOARD_KWORLD_ATSC_315U:
2711 em28xx_write_reg(dev, 0x0d, 0x42);
2712 msleep(10);
2713 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2714 msleep(10);
2715 break;
2716 case EM2820_BOARD_KWORLD_PVRTV2800RF:
2717 /* GPIO enables sound on KWORLD PVR TV 2800RF */
2718 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf9);
2719 break;
2720 case EM2820_BOARD_UNKNOWN:
2721 case EM2800_BOARD_UNKNOWN:
2722 /*
2723 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
2724 *
2725 * This occurs because they share identical USB vendor and
2726 * product IDs.
2727 *
2728 * What we do here is look up the EEPROM hash of the K-WORLD
2729 * and if it is found then we decide that we do not have
2730 * a DIGIVOX and reset the device to the K-WORLD instead.
2731 *
2732 * This solution is only valid if they do not share eeprom
2733 * hash identities which has not been determined as yet.
2734 */
2735 case EM2880_BOARD_MSI_DIGIVOX_AD:
2736 if (!em28xx_hint_board(dev))
2737 em28xx_set_model(dev);
2738
2739 /* In cases where we had to use a board hint, the call to
2740 em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
2741 so make the call now so the analog GPIOs are set properly
2742 before probing the i2c bus. */
2743 em28xx_gpio_set(dev, dev->board.tuner_gpio);
2744 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
2745 break;
2746
2747 /*
2748 * The Dikom DK300 is detected as an Kworld VS-DVB-T 323UR.
2749 *
2750 * This occurs because they share identical USB vendor and
2751 * product IDs.
2752 *
2753 * What we do here is look up the EEPROM hash of the Dikom
2754 * and if it is found then we decide that we do not have
2755 * a Kworld and reset the device to the Dikom instead.
2756 *
2757 * This solution is only valid if they do not share eeprom
2758 * hash identities which has not been determined as yet.
2759 */
2760 case EM2882_BOARD_KWORLD_VS_DVBT:
2761 if (!em28xx_hint_board(dev))
2762 em28xx_set_model(dev);
2763
2764 /* In cases where we had to use a board hint, the call to
2765 em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
2766 so make the call now so the analog GPIOs are set properly
2767 before probing the i2c bus. */
2768 em28xx_gpio_set(dev, dev->board.tuner_gpio);
2769 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
2770 break;
2771 }
2772
2773 #if defined(CONFIG_MODULES) && defined(MODULE)
2774 if (dev->board.has_ir_i2c && !disable_ir)
2775 request_module("ir-kbd-i2c");
2776 #endif
2777 if (dev->board.has_snapshot_button)
2778 em28xx_register_snapshot_button(dev);
2779
2780 if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) {
2781 em28xx_errdev("\n\n");
2782 em28xx_errdev("The support for this board weren't "
2783 "valid yet.\n");
2784 em28xx_errdev("Please send a report of having this working\n");
2785 em28xx_errdev("not to V4L mailing list (and/or to other "
2786 "addresses)\n\n");
2787 }
2788
2789 /* Allow override tuner type by a module parameter */
2790 if (tuner >= 0)
2791 dev->tuner_type = tuner;
2792
2793 /* request some modules */
2794 if (dev->board.has_msp34xx)
2795 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2796 "msp3400", 0, msp3400_addrs);
2797
2798 if (dev->board.decoder == EM28XX_SAA711X)
2799 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2800 "saa7115_auto", 0, saa711x_addrs);
2801
2802 if (dev->board.decoder == EM28XX_TVP5150)
2803 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2804 "tvp5150", 0, tvp5150_addrs);
2805
2806 if (dev->em28xx_sensor == EM28XX_MT9V011) {
2807 struct mt9v011_platform_data pdata;
2808 struct i2c_board_info mt9v011_info = {
2809 .type = "mt9v011",
2810 .addr = 0xba >> 1,
2811 .platform_data = &pdata,
2812 };
2813
2814 pdata.xtal = dev->sensor_xtal;
2815 v4l2_i2c_new_subdev_board(&dev->v4l2_dev, &dev->i2c_adap,
2816 &mt9v011_info, NULL);
2817 }
2818
2819
2820 if (dev->board.adecoder == EM28XX_TVAUDIO)
2821 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2822 "tvaudio", dev->board.tvaudio_addr, NULL);
2823
2824 if (dev->board.tuner_type != TUNER_ABSENT) {
2825 int has_demod = (dev->tda9887_conf & TDA9887_PRESENT);
2826
2827 if (dev->board.radio.type)
2828 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2829 "tuner", dev->board.radio_addr, NULL);
2830
2831 if (has_demod)
2832 v4l2_i2c_new_subdev(&dev->v4l2_dev,
2833 &dev->i2c_adap, "tuner",
2834 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
2835 if (dev->tuner_addr == 0) {
2836 enum v4l2_i2c_tuner_type type =
2837 has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV;
2838 struct v4l2_subdev *sd;
2839
2840 sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
2841 &dev->i2c_adap, "tuner",
2842 0, v4l2_i2c_tuner_addrs(type));
2843
2844 if (sd)
2845 dev->tuner_addr = v4l2_i2c_subdev_addr(sd);
2846 } else {
2847 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2848 "tuner", dev->tuner_addr, NULL);
2849 }
2850 }
2851
2852 em28xx_tuner_setup(dev);
2853
2854 if(!disable_ir)
2855 em28xx_ir_init(dev);
2856 }
2857
2858
2859 #if defined(CONFIG_MODULES) && defined(MODULE)
request_module_async(struct work_struct * work)2860 static void request_module_async(struct work_struct *work)
2861 {
2862 struct em28xx *dev = container_of(work,
2863 struct em28xx, request_module_wk);
2864
2865 if (dev->has_audio_class)
2866 request_module("snd-usb-audio");
2867 else if (dev->has_alsa_audio)
2868 request_module("em28xx-alsa");
2869
2870 if (dev->board.has_dvb)
2871 request_module("em28xx-dvb");
2872 }
2873
request_modules(struct em28xx * dev)2874 static void request_modules(struct em28xx *dev)
2875 {
2876 INIT_WORK(&dev->request_module_wk, request_module_async);
2877 schedule_work(&dev->request_module_wk);
2878 }
2879
flush_request_modules(struct em28xx * dev)2880 static void flush_request_modules(struct em28xx *dev)
2881 {
2882 flush_work_sync(&dev->request_module_wk);
2883 }
2884 #else
2885 #define request_modules(dev)
2886 #define flush_request_modules(dev)
2887 #endif /* CONFIG_MODULES */
2888
2889 /*
2890 * em28xx_release_resources()
2891 * unregisters the v4l2,i2c and usb devices
2892 * called when the device gets disconnected or at module unload
2893 */
em28xx_release_resources(struct em28xx * dev)2894 void em28xx_release_resources(struct em28xx *dev)
2895 {
2896 if (dev->sbutton_input_dev)
2897 em28xx_deregister_snapshot_button(dev);
2898
2899 if (dev->ir)
2900 em28xx_ir_fini(dev);
2901
2902 /*FIXME: I2C IR should be disconnected */
2903
2904 em28xx_release_analog_resources(dev);
2905
2906 em28xx_i2c_unregister(dev);
2907
2908 v4l2_device_unregister(&dev->v4l2_dev);
2909
2910 usb_put_dev(dev->udev);
2911
2912 /* Mark device as unused */
2913 clear_bit(dev->devno, &em28xx_devused);
2914 };
2915
2916 /*
2917 * em28xx_init_dev()
2918 * allocates and inits the device structs, registers i2c bus and v4l device
2919 */
em28xx_init_dev(struct em28xx * dev,struct usb_device * udev,struct usb_interface * interface,int minor)2920 static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
2921 struct usb_interface *interface,
2922 int minor)
2923 {
2924 int retval;
2925
2926 dev->udev = udev;
2927 mutex_init(&dev->ctrl_urb_lock);
2928 spin_lock_init(&dev->slock);
2929 init_waitqueue_head(&dev->open);
2930 init_waitqueue_head(&dev->wait_frame);
2931 init_waitqueue_head(&dev->wait_stream);
2932
2933 dev->em28xx_write_regs = em28xx_write_regs;
2934 dev->em28xx_read_reg = em28xx_read_reg;
2935 dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len;
2936 dev->em28xx_write_regs_req = em28xx_write_regs_req;
2937 dev->em28xx_read_reg_req = em28xx_read_reg_req;
2938 dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800;
2939
2940 em28xx_set_model(dev);
2941
2942 /* Set the default GPO/GPIO for legacy devices */
2943 dev->reg_gpo_num = EM2880_R04_GPO;
2944 dev->reg_gpio_num = EM28XX_R08_GPIO;
2945
2946 dev->wait_after_write = 5;
2947
2948 /* Based on the Chip ID, set the device configuration */
2949 retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
2950 if (retval > 0) {
2951 dev->chip_id = retval;
2952
2953 switch (dev->chip_id) {
2954 case CHIP_ID_EM2800:
2955 em28xx_info("chip ID is em2800\n");
2956 break;
2957 case CHIP_ID_EM2710:
2958 em28xx_info("chip ID is em2710\n");
2959 break;
2960 case CHIP_ID_EM2750:
2961 em28xx_info("chip ID is em2750\n");
2962 break;
2963 case CHIP_ID_EM2820:
2964 em28xx_info("chip ID is em2820 (or em2710)\n");
2965 break;
2966 case CHIP_ID_EM2840:
2967 em28xx_info("chip ID is em2840\n");
2968 break;
2969 case CHIP_ID_EM2860:
2970 em28xx_info("chip ID is em2860\n");
2971 break;
2972 case CHIP_ID_EM2870:
2973 em28xx_info("chip ID is em2870\n");
2974 dev->wait_after_write = 0;
2975 break;
2976 case CHIP_ID_EM2874:
2977 em28xx_info("chip ID is em2874\n");
2978 dev->reg_gpio_num = EM2874_R80_GPIO;
2979 dev->wait_after_write = 0;
2980 break;
2981 case CHIP_ID_EM28174:
2982 em28xx_info("chip ID is em28174\n");
2983 dev->reg_gpio_num = EM2874_R80_GPIO;
2984 dev->wait_after_write = 0;
2985 break;
2986 case CHIP_ID_EM2883:
2987 em28xx_info("chip ID is em2882/em2883\n");
2988 dev->wait_after_write = 0;
2989 break;
2990 case CHIP_ID_EM2884:
2991 em28xx_info("chip ID is em2884\n");
2992 dev->reg_gpio_num = EM2874_R80_GPIO;
2993 dev->wait_after_write = 0;
2994 break;
2995 default:
2996 em28xx_info("em28xx chip ID = %d\n", dev->chip_id);
2997 }
2998 }
2999
3000 if (dev->is_audio_only) {
3001 retval = em28xx_audio_setup(dev);
3002 if (retval)
3003 return -ENODEV;
3004 em28xx_init_extension(dev);
3005
3006 return 0;
3007 }
3008
3009 /* Prepopulate cached GPO register content */
3010 retval = em28xx_read_reg(dev, dev->reg_gpo_num);
3011 if (retval >= 0)
3012 dev->reg_gpo = retval;
3013
3014 em28xx_pre_card_setup(dev);
3015
3016 if (!dev->board.is_em2800) {
3017 /* Resets I2C speed */
3018 retval = em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
3019 if (retval < 0) {
3020 em28xx_errdev("%s: em28xx_write_reg failed!"
3021 " retval [%d]\n",
3022 __func__, retval);
3023 return retval;
3024 }
3025 }
3026
3027 retval = v4l2_device_register(&interface->dev, &dev->v4l2_dev);
3028 if (retval < 0) {
3029 em28xx_errdev("Call to v4l2_device_register() failed!\n");
3030 return retval;
3031 }
3032
3033 /* register i2c bus */
3034 retval = em28xx_i2c_register(dev);
3035 if (retval < 0) {
3036 em28xx_errdev("%s: em28xx_i2c_register - error [%d]!\n",
3037 __func__, retval);
3038 goto unregister_dev;
3039 }
3040
3041 /*
3042 * Default format, used for tvp5150 or saa711x output formats
3043 */
3044 dev->vinmode = 0x10;
3045 dev->vinctl = EM28XX_VINCTRL_INTERLACED |
3046 EM28XX_VINCTRL_CCIR656_ENABLE;
3047
3048 /* Do board specific init and eeprom reading */
3049 em28xx_card_setup(dev);
3050
3051 /* Configure audio */
3052 retval = em28xx_audio_setup(dev);
3053 if (retval < 0) {
3054 em28xx_errdev("%s: Error while setting audio - error [%d]!\n",
3055 __func__, retval);
3056 goto fail;
3057 }
3058
3059 /* wake i2c devices */
3060 em28xx_wake_i2c(dev);
3061
3062 /* init video dma queues */
3063 INIT_LIST_HEAD(&dev->vidq.active);
3064 INIT_LIST_HEAD(&dev->vidq.queued);
3065 INIT_LIST_HEAD(&dev->vbiq.active);
3066 INIT_LIST_HEAD(&dev->vbiq.queued);
3067
3068 if (dev->board.has_msp34xx) {
3069 /* Send a reset to other chips via gpio */
3070 retval = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
3071 if (retval < 0) {
3072 em28xx_errdev("%s: em28xx_write_reg - "
3073 "msp34xx(1) failed! error [%d]\n",
3074 __func__, retval);
3075 goto fail;
3076 }
3077 msleep(3);
3078
3079 retval = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
3080 if (retval < 0) {
3081 em28xx_errdev("%s: em28xx_write_reg - "
3082 "msp34xx(2) failed! error [%d]\n",
3083 __func__, retval);
3084 goto fail;
3085 }
3086 msleep(3);
3087 }
3088
3089 retval = em28xx_register_analog_devices(dev);
3090 if (retval < 0) {
3091 goto fail;
3092 }
3093
3094 /* Save some power by putting tuner to sleep */
3095 v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_power, 0);
3096
3097 return 0;
3098
3099 fail:
3100 em28xx_i2c_unregister(dev);
3101
3102 unregister_dev:
3103 v4l2_device_unregister(&dev->v4l2_dev);
3104
3105 return retval;
3106 }
3107
3108 /* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */
3109 #define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
3110
3111 /*
3112 * em28xx_usb_probe()
3113 * checks for supported devices
3114 */
em28xx_usb_probe(struct usb_interface * interface,const struct usb_device_id * id)3115 static int em28xx_usb_probe(struct usb_interface *interface,
3116 const struct usb_device_id *id)
3117 {
3118 struct usb_device *udev;
3119 struct em28xx *dev = NULL;
3120 int retval;
3121 bool has_audio = false, has_video = false, has_dvb = false;
3122 int i, nr;
3123 const int ifnum = interface->altsetting[0].desc.bInterfaceNumber;
3124 char *speed;
3125 char descr[255] = "";
3126
3127 udev = usb_get_dev(interface_to_usbdev(interface));
3128
3129 /* Check to see next free device and mark as used */
3130 do {
3131 nr = find_first_zero_bit(&em28xx_devused, EM28XX_MAXBOARDS);
3132 if (nr >= EM28XX_MAXBOARDS) {
3133 /* No free device slots */
3134 printk(DRIVER_NAME ": Supports only %i em28xx boards.\n",
3135 EM28XX_MAXBOARDS);
3136 retval = -ENOMEM;
3137 goto err_no_slot;
3138 }
3139 } while (test_and_set_bit(nr, &em28xx_devused));
3140
3141 /* Don't register audio interfaces */
3142 if (interface->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
3143 em28xx_err(DRIVER_NAME " audio device (%04x:%04x): "
3144 "interface %i, class %i\n",
3145 le16_to_cpu(udev->descriptor.idVendor),
3146 le16_to_cpu(udev->descriptor.idProduct),
3147 ifnum,
3148 interface->altsetting[0].desc.bInterfaceClass);
3149
3150 retval = -ENODEV;
3151 goto err;
3152 }
3153
3154 /* allocate memory for our device state and initialize it */
3155 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
3156 if (dev == NULL) {
3157 em28xx_err(DRIVER_NAME ": out of memory!\n");
3158 retval = -ENOMEM;
3159 goto err;
3160 }
3161
3162 /* compute alternate max packet sizes */
3163 dev->alt_max_pkt_size = kmalloc(sizeof(dev->alt_max_pkt_size[0]) *
3164 interface->num_altsetting, GFP_KERNEL);
3165 if (dev->alt_max_pkt_size == NULL) {
3166 em28xx_errdev("out of memory!\n");
3167 kfree(dev);
3168 retval = -ENOMEM;
3169 goto err;
3170 }
3171
3172 /* Get endpoints */
3173 for (i = 0; i < interface->num_altsetting; i++) {
3174 int ep;
3175
3176 for (ep = 0; ep < interface->altsetting[i].desc.bNumEndpoints; ep++) {
3177 const struct usb_endpoint_descriptor *e;
3178 int sizedescr, size;
3179
3180 e = &interface->altsetting[i].endpoint[ep].desc;
3181
3182 sizedescr = le16_to_cpu(e->wMaxPacketSize);
3183 size = sizedescr & 0x7ff;
3184
3185 if (udev->speed == USB_SPEED_HIGH)
3186 size = size * hb_mult(sizedescr);
3187
3188 if (usb_endpoint_xfer_isoc(e) &&
3189 usb_endpoint_dir_in(e)) {
3190 switch (e->bEndpointAddress) {
3191 case EM28XX_EP_AUDIO:
3192 has_audio = true;
3193 break;
3194 case EM28XX_EP_ANALOG:
3195 has_video = true;
3196 dev->alt_max_pkt_size[i] = size;
3197 break;
3198 case EM28XX_EP_DIGITAL:
3199 has_dvb = true;
3200 if (size > dev->dvb_max_pkt_size) {
3201 dev->dvb_max_pkt_size = size;
3202 dev->dvb_alt = i;
3203 }
3204 break;
3205 }
3206 }
3207 }
3208 }
3209
3210 if (!(has_audio || has_video || has_dvb)) {
3211 retval = -ENODEV;
3212 goto err_free;
3213 }
3214
3215 switch (udev->speed) {
3216 case USB_SPEED_LOW:
3217 speed = "1.5";
3218 break;
3219 case USB_SPEED_UNKNOWN:
3220 case USB_SPEED_FULL:
3221 speed = "12";
3222 break;
3223 case USB_SPEED_HIGH:
3224 speed = "480";
3225 break;
3226 default:
3227 speed = "unknown";
3228 }
3229
3230 if (udev->manufacturer)
3231 strlcpy(descr, udev->manufacturer, sizeof(descr));
3232
3233 if (udev->product) {
3234 if (*descr)
3235 strlcat(descr, " ", sizeof(descr));
3236 strlcat(descr, udev->product, sizeof(descr));
3237 }
3238
3239 if (*descr)
3240 strlcat(descr, " ", sizeof(descr));
3241
3242 printk(KERN_INFO DRIVER_NAME
3243 ": New device %s@ %s Mbps (%04x:%04x, interface %d, class %d)\n",
3244 descr,
3245 speed,
3246 le16_to_cpu(udev->descriptor.idVendor),
3247 le16_to_cpu(udev->descriptor.idProduct),
3248 ifnum,
3249 interface->altsetting->desc.bInterfaceNumber);
3250
3251 if (has_audio)
3252 printk(KERN_INFO DRIVER_NAME
3253 ": Audio Vendor Class interface %i found\n",
3254 ifnum);
3255 if (has_video)
3256 printk(KERN_INFO DRIVER_NAME
3257 ": Video interface %i found\n",
3258 ifnum);
3259 if (has_dvb)
3260 printk(KERN_INFO DRIVER_NAME
3261 ": DVB interface %i found\n",
3262 ifnum);
3263
3264 /*
3265 * Make sure we have 480 Mbps of bandwidth, otherwise things like
3266 * video stream wouldn't likely work, since 12 Mbps is generally
3267 * not enough even for most Digital TV streams.
3268 */
3269 if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) {
3270 printk(DRIVER_NAME ": Device initialization failed.\n");
3271 printk(DRIVER_NAME ": Device must be connected to a high-speed"
3272 " USB 2.0 port.\n");
3273 retval = -ENODEV;
3274 goto err_free;
3275 }
3276
3277 snprintf(dev->name, sizeof(dev->name), "em28xx #%d", nr);
3278 dev->devno = nr;
3279 dev->model = id->driver_info;
3280 dev->alt = -1;
3281 dev->is_audio_only = has_audio && !(has_video || has_dvb);
3282 dev->has_alsa_audio = has_audio;
3283 dev->audio_ifnum = ifnum;
3284
3285 /* Checks if audio is provided by some interface */
3286 for (i = 0; i < udev->config->desc.bNumInterfaces; i++) {
3287 struct usb_interface *uif = udev->config->interface[i];
3288 if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
3289 dev->has_audio_class = 1;
3290 break;
3291 }
3292 }
3293
3294 dev->num_alt = interface->num_altsetting;
3295
3296 if ((card[nr] >= 0) && (card[nr] < em28xx_bcount))
3297 dev->model = card[nr];
3298
3299 /* save our data pointer in this interface device */
3300 usb_set_intfdata(interface, dev);
3301
3302 /* allocate device struct */
3303 mutex_init(&dev->lock);
3304 mutex_lock(&dev->lock);
3305 retval = em28xx_init_dev(dev, udev, interface, nr);
3306 if (retval) {
3307 goto unlock_and_free;
3308 }
3309
3310 request_modules(dev);
3311
3312 /* Should be the last thing to do, to avoid newer udev's to
3313 open the device before fully initializing it
3314 */
3315 mutex_unlock(&dev->lock);
3316
3317 /*
3318 * These extensions can be modules. If the modules are already
3319 * loaded then we can initialise the device now, otherwise we
3320 * will initialise it when the modules load instead.
3321 */
3322 em28xx_init_extension(dev);
3323
3324 return 0;
3325
3326 unlock_and_free:
3327 mutex_unlock(&dev->lock);
3328
3329 err_free:
3330 kfree(dev->alt_max_pkt_size);
3331 kfree(dev);
3332
3333 err:
3334 clear_bit(nr, &em28xx_devused);
3335
3336 err_no_slot:
3337 usb_put_dev(udev);
3338 return retval;
3339 }
3340
3341 /*
3342 * em28xx_usb_disconnect()
3343 * called when the device gets disconnected
3344 * video device will be unregistered on v4l2_close in case it is still open
3345 */
em28xx_usb_disconnect(struct usb_interface * interface)3346 static void em28xx_usb_disconnect(struct usb_interface *interface)
3347 {
3348 struct em28xx *dev;
3349
3350 dev = usb_get_intfdata(interface);
3351 usb_set_intfdata(interface, NULL);
3352
3353 if (!dev)
3354 return;
3355
3356 if (dev->is_audio_only) {
3357 mutex_lock(&dev->lock);
3358 em28xx_close_extension(dev);
3359 mutex_unlock(&dev->lock);
3360 return;
3361 }
3362
3363 em28xx_info("disconnecting %s\n", dev->vdev->name);
3364
3365 flush_request_modules(dev);
3366
3367 /* wait until all current v4l2 io is finished then deallocate
3368 resources */
3369 mutex_lock(&dev->lock);
3370
3371 wake_up_interruptible_all(&dev->open);
3372
3373 v4l2_device_disconnect(&dev->v4l2_dev);
3374
3375 if (dev->users) {
3376 em28xx_warn
3377 ("device %s is open! Deregistration and memory "
3378 "deallocation are deferred on close.\n",
3379 video_device_node_name(dev->vdev));
3380
3381 dev->state |= DEV_MISCONFIGURED;
3382 em28xx_uninit_isoc(dev);
3383 dev->state |= DEV_DISCONNECTED;
3384 wake_up_interruptible(&dev->wait_frame);
3385 wake_up_interruptible(&dev->wait_stream);
3386 } else {
3387 dev->state |= DEV_DISCONNECTED;
3388 em28xx_release_resources(dev);
3389 }
3390
3391 mutex_unlock(&dev->lock);
3392
3393 em28xx_close_extension(dev);
3394
3395 if (!dev->users) {
3396 kfree(dev->alt_max_pkt_size);
3397 kfree(dev);
3398 }
3399 }
3400
3401 static struct usb_driver em28xx_usb_driver = {
3402 .name = "em28xx",
3403 .probe = em28xx_usb_probe,
3404 .disconnect = em28xx_usb_disconnect,
3405 .id_table = em28xx_id_table,
3406 };
3407
3408 module_usb_driver(em28xx_usb_driver);
3409