1 // SPDX-License-Identifier: GPL-2.0
2 #include <linux/linkage.h>
3 #include <linux/errno.h>
4 #include <linux/signal.h>
5 #include <linux/sched.h>
6 #include <linux/ioport.h>
7 #include <linux/interrupt.h>
8 #include <linux/irq.h>
9 #include <linux/timex.h>
10 #include <linux/random.h>
11 #include <linux/init.h>
12 #include <linux/kernel_stat.h>
13 #include <linux/syscore_ops.h>
14 #include <linux/bitops.h>
15 #include <linux/acpi.h>
16 #include <linux/io.h>
17 #include <linux/delay.h>
18 #include <linux/pgtable.h>
19
20 #include <linux/atomic.h>
21 #include <asm/timer.h>
22 #include <asm/hw_irq.h>
23 #include <asm/desc.h>
24 #include <asm/apic.h>
25 #include <asm/i8259.h>
26 #include <asm/io_apic.h>
27
28 /*
29 * This is the 'legacy' 8259A Programmable Interrupt Controller,
30 * present in the majority of PC/AT boxes.
31 * plus some generic x86 specific things if generic specifics makes
32 * any sense at all.
33 */
34 static void init_8259A(int auto_eoi);
35
36 static bool pcat_compat __ro_after_init;
37 static int i8259A_auto_eoi;
38 DEFINE_RAW_SPINLOCK(i8259A_lock);
39
40 /*
41 * 8259A PIC functions to handle ISA devices:
42 */
43
44 /*
45 * This contains the irq mask for both 8259A irq controllers,
46 */
47 unsigned int cached_irq_mask = 0xffff;
48
49 /*
50 * Not all IRQs can be routed through the IO-APIC, eg. on certain (older)
51 * boards the timer interrupt is not really connected to any IO-APIC pin,
52 * it's fed to the master 8259A's IR0 line only.
53 *
54 * Any '1' bit in this mask means the IRQ is routed through the IO-APIC.
55 * this 'mixed mode' IRQ handling costs nothing because it's only used
56 * at IRQ setup time.
57 */
58 unsigned long io_apic_irqs;
59
mask_8259A_irq(unsigned int irq)60 static void mask_8259A_irq(unsigned int irq)
61 {
62 unsigned int mask = 1 << irq;
63 unsigned long flags;
64
65 raw_spin_lock_irqsave(&i8259A_lock, flags);
66 cached_irq_mask |= mask;
67 if (irq & 8)
68 outb(cached_slave_mask, PIC_SLAVE_IMR);
69 else
70 outb(cached_master_mask, PIC_MASTER_IMR);
71 raw_spin_unlock_irqrestore(&i8259A_lock, flags);
72 }
73
disable_8259A_irq(struct irq_data * data)74 static void disable_8259A_irq(struct irq_data *data)
75 {
76 mask_8259A_irq(data->irq);
77 }
78
unmask_8259A_irq(unsigned int irq)79 static void unmask_8259A_irq(unsigned int irq)
80 {
81 unsigned int mask = ~(1 << irq);
82 unsigned long flags;
83
84 raw_spin_lock_irqsave(&i8259A_lock, flags);
85 cached_irq_mask &= mask;
86 if (irq & 8)
87 outb(cached_slave_mask, PIC_SLAVE_IMR);
88 else
89 outb(cached_master_mask, PIC_MASTER_IMR);
90 raw_spin_unlock_irqrestore(&i8259A_lock, flags);
91 }
92
enable_8259A_irq(struct irq_data * data)93 static void enable_8259A_irq(struct irq_data *data)
94 {
95 unmask_8259A_irq(data->irq);
96 }
97
i8259A_irq_pending(unsigned int irq)98 static int i8259A_irq_pending(unsigned int irq)
99 {
100 unsigned int mask = 1<<irq;
101 unsigned long flags;
102 int ret;
103
104 raw_spin_lock_irqsave(&i8259A_lock, flags);
105 if (irq < 8)
106 ret = inb(PIC_MASTER_CMD) & mask;
107 else
108 ret = inb(PIC_SLAVE_CMD) & (mask >> 8);
109 raw_spin_unlock_irqrestore(&i8259A_lock, flags);
110
111 return ret;
112 }
113
make_8259A_irq(unsigned int irq)114 static void make_8259A_irq(unsigned int irq)
115 {
116 disable_irq_nosync(irq);
117 io_apic_irqs &= ~(1<<irq);
118 irq_set_chip_and_handler(irq, &i8259A_chip, handle_level_irq);
119 irq_set_status_flags(irq, IRQ_LEVEL);
120 enable_irq(irq);
121 lapic_assign_legacy_vector(irq, true);
122 }
123
124 /*
125 * This function assumes to be called rarely. Switching between
126 * 8259A registers is slow.
127 * This has to be protected by the irq controller spinlock
128 * before being called.
129 */
i8259A_irq_real(unsigned int irq)130 static inline int i8259A_irq_real(unsigned int irq)
131 {
132 int value;
133 int irqmask = 1<<irq;
134
135 if (irq < 8) {
136 outb(0x0B, PIC_MASTER_CMD); /* ISR register */
137 value = inb(PIC_MASTER_CMD) & irqmask;
138 outb(0x0A, PIC_MASTER_CMD); /* back to the IRR register */
139 return value;
140 }
141 outb(0x0B, PIC_SLAVE_CMD); /* ISR register */
142 value = inb(PIC_SLAVE_CMD) & (irqmask >> 8);
143 outb(0x0A, PIC_SLAVE_CMD); /* back to the IRR register */
144 return value;
145 }
146
147 /*
148 * Careful! The 8259A is a fragile beast, it pretty
149 * much _has_ to be done exactly like this (mask it
150 * first, _then_ send the EOI, and the order of EOI
151 * to the two 8259s is important!
152 */
mask_and_ack_8259A(struct irq_data * data)153 static void mask_and_ack_8259A(struct irq_data *data)
154 {
155 unsigned int irq = data->irq;
156 unsigned int irqmask = 1 << irq;
157 unsigned long flags;
158
159 raw_spin_lock_irqsave(&i8259A_lock, flags);
160 /*
161 * Lightweight spurious IRQ detection. We do not want
162 * to overdo spurious IRQ handling - it's usually a sign
163 * of hardware problems, so we only do the checks we can
164 * do without slowing down good hardware unnecessarily.
165 *
166 * Note that IRQ7 and IRQ15 (the two spurious IRQs
167 * usually resulting from the 8259A-1|2 PICs) occur
168 * even if the IRQ is masked in the 8259A. Thus we
169 * can check spurious 8259A IRQs without doing the
170 * quite slow i8259A_irq_real() call for every IRQ.
171 * This does not cover 100% of spurious interrupts,
172 * but should be enough to warn the user that there
173 * is something bad going on ...
174 */
175 if (cached_irq_mask & irqmask)
176 goto spurious_8259A_irq;
177 cached_irq_mask |= irqmask;
178
179 handle_real_irq:
180 if (irq & 8) {
181 inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */
182 outb(cached_slave_mask, PIC_SLAVE_IMR);
183 /* 'Specific EOI' to slave */
184 outb(0x60+(irq&7), PIC_SLAVE_CMD);
185 /* 'Specific EOI' to master-IRQ2 */
186 outb(0x60+PIC_CASCADE_IR, PIC_MASTER_CMD);
187 } else {
188 inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */
189 outb(cached_master_mask, PIC_MASTER_IMR);
190 outb(0x60+irq, PIC_MASTER_CMD); /* 'Specific EOI to master */
191 }
192 raw_spin_unlock_irqrestore(&i8259A_lock, flags);
193 return;
194
195 spurious_8259A_irq:
196 /*
197 * this is the slow path - should happen rarely.
198 */
199 if (i8259A_irq_real(irq))
200 /*
201 * oops, the IRQ _is_ in service according to the
202 * 8259A - not spurious, go handle it.
203 */
204 goto handle_real_irq;
205
206 {
207 static int spurious_irq_mask;
208 /*
209 * At this point we can be sure the IRQ is spurious,
210 * lets ACK and report it. [once per IRQ]
211 */
212 if (!(spurious_irq_mask & irqmask)) {
213 printk_deferred(KERN_DEBUG
214 "spurious 8259A interrupt: IRQ%d.\n", irq);
215 spurious_irq_mask |= irqmask;
216 }
217 atomic_inc(&irq_err_count);
218 /*
219 * Theoretically we do not have to handle this IRQ,
220 * but in Linux this does not cause problems and is
221 * simpler for us.
222 */
223 goto handle_real_irq;
224 }
225 }
226
227 struct irq_chip i8259A_chip = {
228 .name = "XT-PIC",
229 .irq_mask = disable_8259A_irq,
230 .irq_disable = disable_8259A_irq,
231 .irq_unmask = enable_8259A_irq,
232 .irq_mask_ack = mask_and_ack_8259A,
233 };
234
235 static char irq_trigger[2];
236 /* ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ */
restore_ELCR(char * trigger)237 static void restore_ELCR(char *trigger)
238 {
239 outb(trigger[0], PIC_ELCR1);
240 outb(trigger[1], PIC_ELCR2);
241 }
242
save_ELCR(char * trigger)243 static void save_ELCR(char *trigger)
244 {
245 /* IRQ 0,1,2,8,13 are marked as reserved */
246 trigger[0] = inb(PIC_ELCR1) & 0xF8;
247 trigger[1] = inb(PIC_ELCR2) & 0xDE;
248 }
249
i8259A_resume(void)250 static void i8259A_resume(void)
251 {
252 init_8259A(i8259A_auto_eoi);
253 restore_ELCR(irq_trigger);
254 }
255
i8259A_suspend(void)256 static int i8259A_suspend(void)
257 {
258 save_ELCR(irq_trigger);
259 return 0;
260 }
261
i8259A_shutdown(void)262 static void i8259A_shutdown(void)
263 {
264 /* Put the i8259A into a quiescent state that
265 * the kernel initialization code can get it
266 * out of.
267 */
268 outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */
269 outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */
270 }
271
272 static struct syscore_ops i8259_syscore_ops = {
273 .suspend = i8259A_suspend,
274 .resume = i8259A_resume,
275 .shutdown = i8259A_shutdown,
276 };
277
mask_8259A(void)278 static void mask_8259A(void)
279 {
280 unsigned long flags;
281
282 raw_spin_lock_irqsave(&i8259A_lock, flags);
283
284 outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */
285 outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */
286
287 raw_spin_unlock_irqrestore(&i8259A_lock, flags);
288 }
289
unmask_8259A(void)290 static void unmask_8259A(void)
291 {
292 unsigned long flags;
293
294 raw_spin_lock_irqsave(&i8259A_lock, flags);
295
296 outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */
297 outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */
298
299 raw_spin_unlock_irqrestore(&i8259A_lock, flags);
300 }
301
probe_8259A(void)302 static int probe_8259A(void)
303 {
304 unsigned char new_val, probe_val = ~(1 << PIC_CASCADE_IR);
305 unsigned long flags;
306
307 /*
308 * If MADT has the PCAT_COMPAT flag set, then do not bother probing
309 * for the PIC. Some BIOSes leave the PIC uninitialized and probing
310 * fails.
311 *
312 * Right now this causes problems as quite some code depends on
313 * nr_legacy_irqs() > 0 or has_legacy_pic() == true. This is silly
314 * when the system has an IO/APIC because then PIC is not required
315 * at all, except for really old machines where the timer interrupt
316 * must be routed through the PIC. So just pretend that the PIC is
317 * there and let legacy_pic->init() initialize it for nothing.
318 *
319 * Alternatively this could just try to initialize the PIC and
320 * repeat the probe, but for cases where there is no PIC that's
321 * just pointless.
322 */
323 if (pcat_compat)
324 return nr_legacy_irqs();
325
326 /*
327 * Check to see if we have a PIC. Mask all except the cascade and
328 * read back the value we just wrote. If we don't have a PIC, we
329 * will read 0xff as opposed to the value we wrote.
330 */
331 raw_spin_lock_irqsave(&i8259A_lock, flags);
332
333 outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */
334 outb(probe_val, PIC_MASTER_IMR);
335 new_val = inb(PIC_MASTER_IMR);
336 if (new_val != probe_val) {
337 printk(KERN_INFO "Using NULL legacy PIC\n");
338 legacy_pic = &null_legacy_pic;
339 }
340
341 raw_spin_unlock_irqrestore(&i8259A_lock, flags);
342 return nr_legacy_irqs();
343 }
344
init_8259A(int auto_eoi)345 static void init_8259A(int auto_eoi)
346 {
347 unsigned long flags;
348
349 i8259A_auto_eoi = auto_eoi;
350
351 raw_spin_lock_irqsave(&i8259A_lock, flags);
352
353 outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */
354
355 /*
356 * outb_pic - this has to work on a wide range of PC hardware.
357 */
358 outb_pic(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */
359
360 /* ICW2: 8259A-1 IR0-7 mapped to ISA_IRQ_VECTOR(0) */
361 outb_pic(ISA_IRQ_VECTOR(0), PIC_MASTER_IMR);
362
363 /* 8259A-1 (the master) has a slave on IR2 */
364 outb_pic(1U << PIC_CASCADE_IR, PIC_MASTER_IMR);
365
366 if (auto_eoi) /* master does Auto EOI */
367 outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR);
368 else /* master expects normal EOI */
369 outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR);
370
371 outb_pic(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */
372
373 /* ICW2: 8259A-2 IR0-7 mapped to ISA_IRQ_VECTOR(8) */
374 outb_pic(ISA_IRQ_VECTOR(8), PIC_SLAVE_IMR);
375 /* 8259A-2 is a slave on master's IR2 */
376 outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR);
377 /* (slave's support for AEOI in flat mode is to be investigated) */
378 outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR);
379
380 if (auto_eoi)
381 /*
382 * In AEOI mode we just have to mask the interrupt
383 * when acking.
384 */
385 i8259A_chip.irq_mask_ack = disable_8259A_irq;
386 else
387 i8259A_chip.irq_mask_ack = mask_and_ack_8259A;
388
389 udelay(100); /* wait for 8259A to initialize */
390
391 outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */
392 outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */
393
394 raw_spin_unlock_irqrestore(&i8259A_lock, flags);
395 }
396
397 /*
398 * make i8259 a driver so that we can select pic functions at run time. the goal
399 * is to make x86 binary compatible among pc compatible and non-pc compatible
400 * platforms, such as x86 MID.
401 */
402
legacy_pic_noop(void)403 static void legacy_pic_noop(void) { };
legacy_pic_uint_noop(unsigned int unused)404 static void legacy_pic_uint_noop(unsigned int unused) { };
legacy_pic_int_noop(int unused)405 static void legacy_pic_int_noop(int unused) { };
legacy_pic_irq_pending_noop(unsigned int irq)406 static int legacy_pic_irq_pending_noop(unsigned int irq)
407 {
408 return 0;
409 }
legacy_pic_probe(void)410 static int legacy_pic_probe(void)
411 {
412 return 0;
413 }
414
415 struct legacy_pic null_legacy_pic = {
416 .nr_legacy_irqs = 0,
417 .chip = &dummy_irq_chip,
418 .mask = legacy_pic_uint_noop,
419 .unmask = legacy_pic_uint_noop,
420 .mask_all = legacy_pic_noop,
421 .restore_mask = legacy_pic_noop,
422 .init = legacy_pic_int_noop,
423 .probe = legacy_pic_probe,
424 .irq_pending = legacy_pic_irq_pending_noop,
425 .make_irq = legacy_pic_uint_noop,
426 };
427
428 static struct legacy_pic default_legacy_pic = {
429 .nr_legacy_irqs = NR_IRQS_LEGACY,
430 .chip = &i8259A_chip,
431 .mask = mask_8259A_irq,
432 .unmask = unmask_8259A_irq,
433 .mask_all = mask_8259A,
434 .restore_mask = unmask_8259A,
435 .init = init_8259A,
436 .probe = probe_8259A,
437 .irq_pending = i8259A_irq_pending,
438 .make_irq = make_8259A_irq,
439 };
440
441 struct legacy_pic *legacy_pic = &default_legacy_pic;
442 EXPORT_SYMBOL(legacy_pic);
443
i8259A_init_ops(void)444 static int __init i8259A_init_ops(void)
445 {
446 if (legacy_pic == &default_legacy_pic)
447 register_syscore_ops(&i8259_syscore_ops);
448
449 return 0;
450 }
451 device_initcall(i8259A_init_ops);
452
legacy_pic_pcat_compat(void)453 void __init legacy_pic_pcat_compat(void)
454 {
455 pcat_compat = true;
456 }
457