1 /*
2     ivtv driver internal defines and structures
3     Copyright (C) 2003-2004  Kevin Thayer <nufan_wfk at yahoo.com>
4     Copyright (C) 2004  Chris Kennedy <c@groovy.org>
5     Copyright (C) 2005-2007  Hans Verkuil <hverkuil@xs4all.nl>
6 
7     This program is free software; you can redistribute it and/or modify
8     it under the terms of the GNU General Public License as published by
9     the Free Software Foundation; either version 2 of the License, or
10     (at your option) any later version.
11 
12     This program is distributed in the hope that it will be useful,
13     but WITHOUT ANY WARRANTY; without even the implied warranty of
14     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
15     GNU General Public License for more details.
16 
17     You should have received a copy of the GNU General Public License
18     along with this program; if not, write to the Free Software
19     Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
20  */
21 
22 #ifndef IVTV_DRIVER_H
23 #define IVTV_DRIVER_H
24 
25 /* Internal header for ivtv project:
26  * Driver for the cx23415/6 chip.
27  * Author: Kevin Thayer (nufan_wfk at yahoo.com)
28  * License: GPL
29  * http://www.ivtvdriver.org
30  *
31  * -----
32  * MPG600/MPG160 support by  T.Adachi <tadachi@tadachi-net.com>
33  *                      and Takeru KOMORIYA<komoriya@paken.org>
34  *
35  * AVerMedia M179 GPIO info by Chris Pinkham <cpinkham@bc2va.org>
36  *                using information provided by Jiun-Kuei Jung @ AVerMedia.
37  */
38 
39 #include <linux/module.h>
40 #include <linux/init.h>
41 #include <linux/delay.h>
42 #include <linux/sched.h>
43 #include <linux/fs.h>
44 #include <linux/pci.h>
45 #include <linux/interrupt.h>
46 #include <linux/spinlock.h>
47 #include <linux/i2c.h>
48 #include <linux/i2c-algo-bit.h>
49 #include <linux/list.h>
50 #include <linux/unistd.h>
51 #include <linux/pagemap.h>
52 #include <linux/scatterlist.h>
53 #include <linux/kthread.h>
54 #include <linux/mutex.h>
55 #include <linux/slab.h>
56 #include <asm/uaccess.h>
57 #include <asm/system.h>
58 #include <asm/byteorder.h>
59 
60 #include <linux/dvb/video.h>
61 #include <linux/dvb/audio.h>
62 #include <media/v4l2-common.h>
63 #include <media/v4l2-ioctl.h>
64 #include <media/v4l2-ctrls.h>
65 #include <media/v4l2-device.h>
66 #include <media/v4l2-fh.h>
67 #include <media/tuner.h>
68 #include <media/cx2341x.h>
69 #include <media/ir-kbd-i2c.h>
70 
71 #include <linux/ivtv.h>
72 
73 /* Memory layout */
74 #define IVTV_ENCODER_OFFSET	0x00000000
75 #define IVTV_ENCODER_SIZE	0x00800000	/* Total size is 0x01000000, but only first half is used */
76 #define IVTV_DECODER_OFFSET	0x01000000
77 #define IVTV_DECODER_SIZE	0x00800000	/* Total size is 0x01000000, but only first half is used */
78 #define IVTV_REG_OFFSET 	0x02000000
79 #define IVTV_REG_SIZE		0x00010000
80 
81 /* Maximum ivtv driver instances. Some people have a huge number of
82    capture cards, so set this to a high value. */
83 #define IVTV_MAX_CARDS 32
84 
85 #define IVTV_ENC_STREAM_TYPE_MPG  0
86 #define IVTV_ENC_STREAM_TYPE_YUV  1
87 #define IVTV_ENC_STREAM_TYPE_VBI  2
88 #define IVTV_ENC_STREAM_TYPE_PCM  3
89 #define IVTV_ENC_STREAM_TYPE_RAD  4
90 #define IVTV_DEC_STREAM_TYPE_MPG  5
91 #define IVTV_DEC_STREAM_TYPE_VBI  6
92 #define IVTV_DEC_STREAM_TYPE_VOUT 7
93 #define IVTV_DEC_STREAM_TYPE_YUV  8
94 #define IVTV_MAX_STREAMS	  9
95 
96 #define IVTV_DMA_SG_OSD_ENT	(2883584/PAGE_SIZE)	/* sg entities */
97 
98 /* DMA Registers */
99 #define IVTV_REG_DMAXFER 	(0x0000)
100 #define IVTV_REG_DMASTATUS 	(0x0004)
101 #define IVTV_REG_DECDMAADDR 	(0x0008)
102 #define IVTV_REG_ENCDMAADDR 	(0x000c)
103 #define IVTV_REG_DMACONTROL 	(0x0010)
104 #define IVTV_REG_IRQSTATUS 	(0x0040)
105 #define IVTV_REG_IRQMASK 	(0x0048)
106 
107 /* Setup Registers */
108 #define IVTV_REG_ENC_SDRAM_REFRESH 	(0x07F8)
109 #define IVTV_REG_ENC_SDRAM_PRECHARGE 	(0x07FC)
110 #define IVTV_REG_DEC_SDRAM_REFRESH 	(0x08F8)
111 #define IVTV_REG_DEC_SDRAM_PRECHARGE 	(0x08FC)
112 #define IVTV_REG_VDM 			(0x2800)
113 #define IVTV_REG_AO 			(0x2D00)
114 #define IVTV_REG_BYTEFLUSH 		(0x2D24)
115 #define IVTV_REG_SPU 			(0x9050)
116 #define IVTV_REG_HW_BLOCKS 		(0x9054)
117 #define IVTV_REG_VPU 			(0x9058)
118 #define IVTV_REG_APU 			(0xA064)
119 
120 /* Other registers */
121 #define IVTV_REG_DEC_LINE_FIELD		(0x28C0)
122 
123 /* debugging */
124 extern int ivtv_debug;
125 #ifdef CONFIG_VIDEO_ADV_DEBUG
126 extern int ivtv_fw_debug;
127 #endif
128 
129 #define IVTV_DBGFLG_WARN    (1 << 0)
130 #define IVTV_DBGFLG_INFO    (1 << 1)
131 #define IVTV_DBGFLG_MB      (1 << 2)
132 #define IVTV_DBGFLG_IOCTL   (1 << 3)
133 #define IVTV_DBGFLG_FILE    (1 << 4)
134 #define IVTV_DBGFLG_DMA     (1 << 5)
135 #define IVTV_DBGFLG_IRQ     (1 << 6)
136 #define IVTV_DBGFLG_DEC     (1 << 7)
137 #define IVTV_DBGFLG_YUV     (1 << 8)
138 #define IVTV_DBGFLG_I2C     (1 << 9)
139 /* Flag to turn on high volume debugging */
140 #define IVTV_DBGFLG_HIGHVOL (1 << 10)
141 
142 #define IVTV_DEBUG(x, type, fmt, args...) \
143 	do { \
144 		if ((x) & ivtv_debug) \
145 			v4l2_info(&itv->v4l2_dev, " " type ": " fmt , ##args);	\
146 	} while (0)
147 #define IVTV_DEBUG_WARN(fmt, args...)  IVTV_DEBUG(IVTV_DBGFLG_WARN,  "warn",  fmt , ## args)
148 #define IVTV_DEBUG_INFO(fmt, args...)  IVTV_DEBUG(IVTV_DBGFLG_INFO,  "info",  fmt , ## args)
149 #define IVTV_DEBUG_MB(fmt, args...)    IVTV_DEBUG(IVTV_DBGFLG_MB,    "mb",    fmt , ## args)
150 #define IVTV_DEBUG_DMA(fmt, args...)   IVTV_DEBUG(IVTV_DBGFLG_DMA,   "dma",   fmt , ## args)
151 #define IVTV_DEBUG_IOCTL(fmt, args...) IVTV_DEBUG(IVTV_DBGFLG_IOCTL, "ioctl", fmt , ## args)
152 #define IVTV_DEBUG_FILE(fmt, args...)  IVTV_DEBUG(IVTV_DBGFLG_FILE,  "file",  fmt , ## args)
153 #define IVTV_DEBUG_I2C(fmt, args...)   IVTV_DEBUG(IVTV_DBGFLG_I2C,   "i2c",   fmt , ## args)
154 #define IVTV_DEBUG_IRQ(fmt, args...)   IVTV_DEBUG(IVTV_DBGFLG_IRQ,   "irq",   fmt , ## args)
155 #define IVTV_DEBUG_DEC(fmt, args...)   IVTV_DEBUG(IVTV_DBGFLG_DEC,   "dec",   fmt , ## args)
156 #define IVTV_DEBUG_YUV(fmt, args...)   IVTV_DEBUG(IVTV_DBGFLG_YUV,   "yuv",   fmt , ## args)
157 
158 #define IVTV_DEBUG_HIGH_VOL(x, type, fmt, args...) \
159 	do { \
160 		if (((x) & ivtv_debug) && (ivtv_debug & IVTV_DBGFLG_HIGHVOL)) 	\
161 			v4l2_info(&itv->v4l2_dev, " " type ": " fmt , ##args);	\
162 	} while (0)
163 #define IVTV_DEBUG_HI_WARN(fmt, args...)  IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_WARN,  "warn",  fmt , ## args)
164 #define IVTV_DEBUG_HI_INFO(fmt, args...)  IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_INFO,  "info",  fmt , ## args)
165 #define IVTV_DEBUG_HI_MB(fmt, args...)    IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_MB,    "mb",    fmt , ## args)
166 #define IVTV_DEBUG_HI_DMA(fmt, args...)   IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_DMA,   "dma",   fmt , ## args)
167 #define IVTV_DEBUG_HI_IOCTL(fmt, args...) IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_IOCTL, "ioctl", fmt , ## args)
168 #define IVTV_DEBUG_HI_FILE(fmt, args...)  IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_FILE,  "file",  fmt , ## args)
169 #define IVTV_DEBUG_HI_I2C(fmt, args...)   IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_I2C,   "i2c",   fmt , ## args)
170 #define IVTV_DEBUG_HI_IRQ(fmt, args...)   IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_IRQ,   "irq",   fmt , ## args)
171 #define IVTV_DEBUG_HI_DEC(fmt, args...)   IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_DEC,   "dec",   fmt , ## args)
172 #define IVTV_DEBUG_HI_YUV(fmt, args...)   IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_YUV,   "yuv",   fmt , ## args)
173 
174 /* Standard kernel messages */
175 #define IVTV_ERR(fmt, args...)      v4l2_err(&itv->v4l2_dev, fmt , ## args)
176 #define IVTV_WARN(fmt, args...)     v4l2_warn(&itv->v4l2_dev, fmt , ## args)
177 #define IVTV_INFO(fmt, args...)     v4l2_info(&itv->v4l2_dev, fmt , ## args)
178 
179 /* output modes (cx23415 only) */
180 #define OUT_NONE        0
181 #define OUT_MPG         1
182 #define OUT_YUV         2
183 #define OUT_UDMA_YUV    3
184 #define OUT_PASSTHROUGH 4
185 
186 #define IVTV_MAX_PGM_INDEX (400)
187 
188 /* Default I2C SCL period in microseconds */
189 #define IVTV_DEFAULT_I2C_CLOCK_PERIOD	20
190 
191 struct ivtv_options {
192 	int kilobytes[IVTV_MAX_STREAMS];        /* size in kilobytes of each stream */
193 	int cardtype;				/* force card type on load */
194 	int tuner;				/* set tuner on load */
195 	int radio;				/* enable/disable radio */
196 	int newi2c;				/* new I2C algorithm */
197 	int i2c_clock_period;			/* period of SCL for I2C bus */
198 };
199 
200 /* ivtv-specific mailbox template */
201 struct ivtv_mailbox {
202 	u32 flags;
203 	u32 cmd;
204 	u32 retval;
205 	u32 timeout;
206 	u32 data[CX2341X_MBOX_MAX_DATA];
207 };
208 
209 struct ivtv_api_cache {
210 	unsigned long last_jiffies;		/* when last command was issued */
211 	u32 data[CX2341X_MBOX_MAX_DATA];	/* last sent api data */
212 };
213 
214 struct ivtv_mailbox_data {
215 	volatile struct ivtv_mailbox __iomem *mbox;
216 	/* Bits 0-2 are for the encoder mailboxes, 0-1 are for the decoder mailboxes.
217 	   If the bit is set, then the corresponding mailbox is in use by the driver. */
218 	unsigned long busy;
219 	u8 max_mbox;
220 };
221 
222 /* per-buffer bit flags */
223 #define IVTV_F_B_NEED_BUF_SWAP  (1 << 0)	/* this buffer should be byte swapped */
224 
225 /* per-stream, s_flags */
226 #define IVTV_F_S_DMA_PENDING	0	/* this stream has pending DMA */
227 #define IVTV_F_S_DMA_HAS_VBI	1       /* the current DMA request also requests VBI data */
228 #define IVTV_F_S_NEEDS_DATA	2 	/* this decoding stream needs more data */
229 
230 #define IVTV_F_S_CLAIMED 	3	/* this stream is claimed */
231 #define IVTV_F_S_STREAMING      4	/* the fw is decoding/encoding this stream */
232 #define IVTV_F_S_INTERNAL_USE	5	/* this stream is used internally (sliced VBI processing) */
233 #define IVTV_F_S_PASSTHROUGH	6	/* this stream is in passthrough mode */
234 #define IVTV_F_S_STREAMOFF	7	/* signal end of stream EOS */
235 #define IVTV_F_S_APPL_IO        8	/* this stream is used read/written by an application */
236 
237 #define IVTV_F_S_PIO_PENDING	9	/* this stream has pending PIO */
238 #define IVTV_F_S_PIO_HAS_VBI	1       /* the current PIO request also requests VBI data */
239 
240 /* per-ivtv, i_flags */
241 #define IVTV_F_I_DMA		   0 	/* DMA in progress */
242 #define IVTV_F_I_UDMA		   1 	/* UDMA in progress */
243 #define IVTV_F_I_UDMA_PENDING	   2 	/* UDMA pending */
244 #define IVTV_F_I_SPEED_CHANGE	   3 	/* a speed change is in progress */
245 #define IVTV_F_I_EOS		   4 	/* end of encoder stream reached */
246 #define IVTV_F_I_RADIO_USER	   5 	/* the radio tuner is selected */
247 #define IVTV_F_I_DIG_RST	   6 	/* reset digitizer */
248 #define IVTV_F_I_DEC_YUV	   7 	/* YUV instead of MPG is being decoded */
249 #define IVTV_F_I_UPDATE_CC	   9  	/* CC should be updated */
250 #define IVTV_F_I_UPDATE_WSS	   10 	/* WSS should be updated */
251 #define IVTV_F_I_UPDATE_VPS	   11 	/* VPS should be updated */
252 #define IVTV_F_I_DECODING_YUV	   12 	/* this stream is YUV frame decoding */
253 #define IVTV_F_I_ENC_PAUSED	   13 	/* the encoder is paused */
254 #define IVTV_F_I_VALID_DEC_TIMINGS 14 	/* last_dec_timing is valid */
255 #define IVTV_F_I_HAVE_WORK  	   15	/* used in the interrupt handler: there is work to be done */
256 #define IVTV_F_I_WORK_HANDLER_VBI  16	/* there is work to be done for VBI */
257 #define IVTV_F_I_WORK_HANDLER_YUV  17	/* there is work to be done for YUV */
258 #define IVTV_F_I_WORK_HANDLER_PIO  18	/* there is work to be done for PIO */
259 #define IVTV_F_I_PIO		   19	/* PIO in progress */
260 #define IVTV_F_I_DEC_PAUSED	   20 	/* the decoder is paused */
261 #define IVTV_F_I_INITED		   21 	/* set after first open */
262 #define IVTV_F_I_FAILED		   22 	/* set if first open failed */
263 
264 /* Event notifications */
265 #define IVTV_F_I_EV_DEC_STOPPED	   28	/* decoder stopped event */
266 #define IVTV_F_I_EV_VSYNC	   29 	/* VSYNC event */
267 #define IVTV_F_I_EV_VSYNC_FIELD    30 	/* VSYNC event field (0 = first, 1 = second field) */
268 #define IVTV_F_I_EV_VSYNC_ENABLED  31 	/* VSYNC event enabled */
269 
270 /* Scatter-Gather array element, used in DMA transfers */
271 struct ivtv_sg_element {
272 	__le32 src;
273 	__le32 dst;
274 	__le32 size;
275 };
276 
277 struct ivtv_sg_host_element {
278 	u32 src;
279 	u32 dst;
280 	u32 size;
281 };
282 
283 struct ivtv_user_dma {
284 	struct mutex lock;
285 	int page_count;
286 	struct page *map[IVTV_DMA_SG_OSD_ENT];
287 	/* Needed when dealing with highmem userspace buffers */
288 	struct page *bouncemap[IVTV_DMA_SG_OSD_ENT];
289 
290 	/* Base Dev SG Array for cx23415/6 */
291 	struct ivtv_sg_element SGarray[IVTV_DMA_SG_OSD_ENT];
292 	dma_addr_t SG_handle;
293 	int SG_length;
294 
295 	/* SG List of Buffers */
296 	struct scatterlist SGlist[IVTV_DMA_SG_OSD_ENT];
297 };
298 
299 struct ivtv_dma_page_info {
300 	unsigned long uaddr;
301 	unsigned long first;
302 	unsigned long last;
303 	unsigned int offset;
304 	unsigned int tail;
305 	int page_count;
306 };
307 
308 struct ivtv_buffer {
309 	struct list_head list;
310 	dma_addr_t dma_handle;
311 	unsigned short b_flags;
312 	unsigned short dma_xfer_cnt;
313 	char *buf;
314 	u32 bytesused;
315 	u32 readpos;
316 };
317 
318 struct ivtv_queue {
319 	struct list_head list;          /* the list of buffers in this queue */
320 	u32 buffers;                    /* number of buffers in this queue */
321 	u32 length;                     /* total number of bytes of available buffer space */
322 	u32 bytesused;                  /* total number of bytes used in this queue */
323 };
324 
325 struct ivtv;				/* forward reference */
326 
327 struct ivtv_stream {
328 	/* These first four fields are always set, even if the stream
329 	   is not actually created. */
330 	struct video_device *vdev;	/* NULL when stream not created */
331 	struct ivtv *itv; 		/* for ease of use */
332 	const char *name;		/* name of the stream */
333 	int type;			/* stream type */
334 
335 	struct v4l2_fh *fh;		/* pointer to the streaming filehandle */
336 	spinlock_t qlock; 		/* locks access to the queues */
337 	unsigned long s_flags;		/* status flags, see above */
338 	int dma;			/* can be PCI_DMA_TODEVICE, PCI_DMA_FROMDEVICE or PCI_DMA_NONE */
339 	u32 pending_offset;
340 	u32 pending_backup;
341 	u64 pending_pts;
342 
343 	u32 dma_offset;
344 	u32 dma_backup;
345 	u64 dma_pts;
346 
347 	int subtype;
348 	wait_queue_head_t waitq;
349 	u32 dma_last_offset;
350 
351 	/* Buffer Stats */
352 	u32 buffers;
353 	u32 buf_size;
354 	u32 buffers_stolen;
355 
356 	/* Buffer Queues */
357 	struct ivtv_queue q_free;	/* free buffers */
358 	struct ivtv_queue q_full;	/* full buffers */
359 	struct ivtv_queue q_io;		/* waiting for I/O */
360 	struct ivtv_queue q_dma;	/* waiting for DMA */
361 	struct ivtv_queue q_predma;	/* waiting for DMA */
362 
363 	/* DMA xfer counter, buffers belonging to the same DMA
364 	   xfer will have the same dma_xfer_cnt. */
365 	u16 dma_xfer_cnt;
366 
367 	/* Base Dev SG Array for cx23415/6 */
368 	struct ivtv_sg_host_element *sg_pending;
369 	struct ivtv_sg_host_element *sg_processing;
370 	struct ivtv_sg_element *sg_dma;
371 	dma_addr_t sg_handle;
372 	int sg_pending_size;
373 	int sg_processing_size;
374 	int sg_processed;
375 
376 	/* SG List of Buffers */
377 	struct scatterlist *SGlist;
378 };
379 
380 struct ivtv_open_id {
381 	struct v4l2_fh fh;
382 	int type;                       /* stream type */
383 	int yuv_frames;                 /* 1: started OUT_UDMA_YUV output mode */
384 	struct ivtv *itv;
385 };
386 
fh2id(struct v4l2_fh * fh)387 static inline struct ivtv_open_id *fh2id(struct v4l2_fh *fh)
388 {
389 	return container_of(fh, struct ivtv_open_id, fh);
390 }
391 
392 struct yuv_frame_info
393 {
394 	u32 update;
395 	s32 src_x;
396 	s32 src_y;
397 	u32 src_w;
398 	u32 src_h;
399 	s32 dst_x;
400 	s32 dst_y;
401 	u32 dst_w;
402 	u32 dst_h;
403 	s32 pan_x;
404 	s32 pan_y;
405 	u32 vis_w;
406 	u32 vis_h;
407 	u32 interlaced_y;
408 	u32 interlaced_uv;
409 	s32 tru_x;
410 	u32 tru_w;
411 	u32 tru_h;
412 	u32 offset_y;
413 	s32 lace_mode;
414 	u32 sync_field;
415 	u32 delay;
416 	u32 interlaced;
417 };
418 
419 #define IVTV_YUV_MODE_INTERLACED	0x00
420 #define IVTV_YUV_MODE_PROGRESSIVE	0x01
421 #define IVTV_YUV_MODE_AUTO		0x02
422 #define IVTV_YUV_MODE_MASK		0x03
423 
424 #define IVTV_YUV_SYNC_EVEN		0x00
425 #define IVTV_YUV_SYNC_ODD		0x04
426 #define IVTV_YUV_SYNC_MASK		0x04
427 
428 #define IVTV_YUV_BUFFERS 8
429 
430 struct yuv_playback_info
431 {
432 	u32 reg_2834;
433 	u32 reg_2838;
434 	u32 reg_283c;
435 	u32 reg_2840;
436 	u32 reg_2844;
437 	u32 reg_2848;
438 	u32 reg_2854;
439 	u32 reg_285c;
440 	u32 reg_2864;
441 
442 	u32 reg_2870;
443 	u32 reg_2874;
444 	u32 reg_2890;
445 	u32 reg_2898;
446 	u32 reg_289c;
447 
448 	u32 reg_2918;
449 	u32 reg_291c;
450 	u32 reg_2920;
451 	u32 reg_2924;
452 	u32 reg_2928;
453 	u32 reg_292c;
454 	u32 reg_2930;
455 
456 	u32 reg_2934;
457 
458 	u32 reg_2938;
459 	u32 reg_293c;
460 	u32 reg_2940;
461 	u32 reg_2944;
462 	u32 reg_2948;
463 	u32 reg_294c;
464 	u32 reg_2950;
465 	u32 reg_2954;
466 	u32 reg_2958;
467 	u32 reg_295c;
468 	u32 reg_2960;
469 	u32 reg_2964;
470 	u32 reg_2968;
471 	u32 reg_296c;
472 
473 	u32 reg_2970;
474 
475 	int v_filter_1;
476 	int v_filter_2;
477 	int h_filter;
478 
479 	u8 track_osd; /* Should yuv output track the OSD size & position */
480 
481 	u32 osd_x_offset;
482 	u32 osd_y_offset;
483 
484 	u32 osd_x_pan;
485 	u32 osd_y_pan;
486 
487 	u32 osd_vis_w;
488 	u32 osd_vis_h;
489 
490 	u32 osd_full_w;
491 	u32 osd_full_h;
492 
493 	int decode_height;
494 
495 	int lace_mode;
496 	int lace_threshold;
497 	int lace_sync_field;
498 
499 	atomic_t next_dma_frame;
500 	atomic_t next_fill_frame;
501 
502 	u32 yuv_forced_update;
503 	int update_frame;
504 
505 	u8 fields_lapsed;   /* Counter used when delaying a frame */
506 
507 	struct yuv_frame_info new_frame_info[IVTV_YUV_BUFFERS];
508 	struct yuv_frame_info old_frame_info;
509 	struct yuv_frame_info old_frame_info_args;
510 
511 	void *blanking_ptr;
512 	dma_addr_t blanking_dmaptr;
513 
514 	int stream_size;
515 
516 	u8 draw_frame; /* PVR350 buffer to draw into */
517 	u8 max_frames_buffered; /* Maximum number of frames to buffer */
518 
519 	struct v4l2_rect main_rect;
520 	u32 v4l2_src_w;
521 	u32 v4l2_src_h;
522 
523 	u8 running; /* Have any frames been displayed */
524 };
525 
526 #define IVTV_VBI_FRAMES 32
527 
528 /* VBI data */
529 struct vbi_cc {
530 	u8 odd[2];	/* two-byte payload of odd field */
531 	u8 even[2];	/* two-byte payload of even field */;
532 };
533 
534 struct vbi_vps {
535 	u8 data[5];	/* five-byte VPS payload */
536 };
537 
538 struct vbi_info {
539 	/* VBI general data, does not change during streaming */
540 
541 	u32 raw_decoder_line_size;              /* raw VBI line size from digitizer */
542 	u8 raw_decoder_sav_odd_field;           /* raw VBI Start Active Video digitizer code of odd field */
543 	u8 raw_decoder_sav_even_field;          /* raw VBI Start Active Video digitizer code of even field */
544 	u32 sliced_decoder_line_size;           /* sliced VBI line size from digitizer */
545 	u8 sliced_decoder_sav_odd_field;        /* sliced VBI Start Active Video digitizer code of odd field */
546 	u8 sliced_decoder_sav_even_field;       /* sliced VBI Start Active Video digitizer code of even field */
547 
548 	u32 start[2];				/* start of first VBI line in the odd/even fields */
549 	u32 count;				/* number of VBI lines per field */
550 	u32 raw_size;				/* size of raw VBI line from the digitizer */
551 	u32 sliced_size;			/* size of sliced VBI line from the digitizer */
552 
553 	u32 dec_start;				/* start in decoder memory of VBI re-insertion buffers */
554 	u32 enc_start;				/* start in encoder memory of VBI capture buffers */
555 	u32 enc_size;				/* size of VBI capture area */
556 	int fpi;				/* number of VBI frames per interrupt */
557 
558 	struct v4l2_format in;			/* current VBI capture format */
559 	struct v4l2_sliced_vbi_format *sliced_in; /* convenience pointer to sliced struct in vbi.in union */
560 	int insert_mpeg;			/* if non-zero, then embed VBI data in MPEG stream */
561 
562 	/* Raw VBI compatibility hack */
563 
564 	u32 frame; 				/* frame counter hack needed for backwards compatibility
565 						   of old VBI software */
566 
567 	/* Sliced VBI output data */
568 
569 	struct vbi_cc cc_payload[256];		/* sliced VBI CC payload array: it is an array to
570 						   prevent dropping CC data if they couldn't be
571 						   processed fast enough */
572 	int cc_payload_idx;			/* index in cc_payload */
573 	u8 cc_missing_cnt;			/* counts number of frames without CC for passthrough mode */
574 	int wss_payload;			/* sliced VBI WSS payload */
575 	u8 wss_missing_cnt;			/* counts number of frames without WSS for passthrough mode */
576 	struct vbi_vps vps_payload;		/* sliced VBI VPS payload */
577 
578 	/* Sliced VBI capture data */
579 
580 	struct v4l2_sliced_vbi_data sliced_data[36];	/* sliced VBI storage for VBI encoder stream */
581 	struct v4l2_sliced_vbi_data sliced_dec_data[36];/* sliced VBI storage for VBI decoder stream */
582 
583 	/* VBI Embedding data */
584 
585 	/* Buffer for VBI data inserted into MPEG stream.
586 	   The first byte is a dummy byte that's never used.
587 	   The next 16 bytes contain the MPEG header for the VBI data,
588 	   the remainder is the actual VBI data.
589 	   The max size accepted by the MPEG VBI reinsertion turns out
590 	   to be 1552 bytes, which happens to be 4 + (1 + 42) * (2 * 18) bytes,
591 	   where 4 is a four byte header, 42 is the max sliced VBI payload, 1 is
592 	   a single line header byte and 2 * 18 is the number of VBI lines per frame.
593 
594 	   However, it seems that the data must be 1K aligned, so we have to
595 	   pad the data until the 1 or 2 K boundary.
596 
597 	   This pointer array will allocate 2049 bytes to store each VBI frame. */
598 	u8 *sliced_mpeg_data[IVTV_VBI_FRAMES];
599 	u32 sliced_mpeg_size[IVTV_VBI_FRAMES];
600 	struct ivtv_buffer sliced_mpeg_buf;	/* temporary buffer holding data from sliced_mpeg_data */
601 	u32 inserted_frame;			/* index in sliced_mpeg_size of next sliced data
602 						   to be inserted in the MPEG stream */
603 };
604 
605 /* forward declaration of struct defined in ivtv-cards.h */
606 struct ivtv_card;
607 
608 /* Struct to hold info about ivtv cards */
609 struct ivtv {
610 	/* General fixed card data */
611 	struct pci_dev *pdev;		/* PCI device */
612 	const struct ivtv_card *card;	/* card information */
613 	const char *card_name;          /* full name of the card */
614 	const struct ivtv_card_tuner_i2c *card_i2c; /* i2c addresses to probe for tuner */
615 	u8 has_cx23415;			/* 1 if it is a cx23415 based card, 0 for cx23416 */
616 	u8 pvr150_workaround;           /* 1 if the cx25840 needs to workaround a PVR150 bug */
617 	u8 nof_inputs;			/* number of video inputs */
618 	u8 nof_audio_inputs;		/* number of audio inputs */
619 	u32 v4l2_cap;			/* V4L2 capabilities of card */
620 	u32 hw_flags; 			/* hardware description of the board */
621 	v4l2_std_id tuner_std;		/* the norm of the card's tuner (fixed) */
622 	struct v4l2_subdev *sd_video;	/* controlling video decoder subdev */
623 	struct v4l2_subdev *sd_audio;	/* controlling audio subdev */
624 	struct v4l2_subdev *sd_muxer;	/* controlling audio muxer subdev */
625 	u32 base_addr;                  /* PCI resource base address */
626 	volatile void __iomem *enc_mem; /* pointer to mapped encoder memory */
627 	volatile void __iomem *dec_mem; /* pointer to mapped decoder memory */
628 	volatile void __iomem *reg_mem; /* pointer to mapped registers */
629 	struct ivtv_options options; 	/* user options */
630 
631 	struct v4l2_device v4l2_dev;
632 	struct cx2341x_handler cxhdl;
633 	struct v4l2_ctrl_handler hdl_gpio;
634 	struct v4l2_subdev sd_gpio;	/* GPIO sub-device */
635 	u16 instance;
636 
637 	/* High-level state info */
638 	unsigned long i_flags;          /* global ivtv flags */
639 	u8 is_50hz;                     /* 1 if the current capture standard is 50 Hz */
640 	u8 is_60hz                      /* 1 if the current capture standard is 60 Hz */;
641 	u8 is_out_50hz                  /* 1 if the current TV output standard is 50 Hz */;
642 	u8 is_out_60hz                  /* 1 if the current TV output standard is 60 Hz */;
643 	int output_mode;                /* decoder output mode: NONE, MPG, YUV, UDMA YUV, passthrough */
644 	u32 audio_input;                /* current audio input */
645 	u32 active_input;               /* current video input */
646 	u32 active_output;              /* current video output */
647 	v4l2_std_id std;                /* current capture TV standard */
648 	v4l2_std_id std_out;            /* current TV output standard */
649 	u8 audio_stereo_mode;           /* decoder setting how to handle stereo MPEG audio */
650 	u8 audio_bilingual_mode;        /* decoder setting how to handle bilingual MPEG audio */
651 
652 
653 	/* Locking */
654 	spinlock_t lock;                /* lock access to this struct */
655 	struct mutex serialize_lock;    /* mutex used to serialize open/close/start/stop/ioctl operations */
656 
657 	/* Streams */
658 	int stream_buf_size[IVTV_MAX_STREAMS];          /* stream buffer size */
659 	struct ivtv_stream streams[IVTV_MAX_STREAMS]; 	/* stream data */
660 	atomic_t capturing;		/* count number of active capture streams */
661 	atomic_t decoding;		/* count number of active decoding streams */
662 
663 
664 	/* Interrupts & DMA */
665 	u32 irqmask;                    /* active interrupts */
666 	u32 irq_rr_idx;                 /* round-robin stream index */
667 	struct kthread_worker irq_worker;		/* kthread worker for PIO/YUV/VBI actions */
668 	struct task_struct *irq_worker_task;		/* task for irq_worker */
669 	struct kthread_work irq_work;	/* kthread work entry */
670 	spinlock_t dma_reg_lock;        /* lock access to DMA engine registers */
671 	int cur_dma_stream;		/* index of current stream doing DMA (-1 if none) */
672 	int cur_pio_stream;		/* index of current stream doing PIO (-1 if none) */
673 	u32 dma_data_req_offset;        /* store offset in decoder memory of current DMA request */
674 	u32 dma_data_req_size;          /* store size of current DMA request */
675 	int dma_retries;                /* current DMA retry attempt */
676 	struct ivtv_user_dma udma;      /* user based DMA for OSD */
677 	struct timer_list dma_timer;    /* timer used to catch unfinished DMAs */
678 	u32 last_vsync_field;           /* last seen vsync field */
679 	wait_queue_head_t dma_waitq;    /* wake up when the current DMA is finished */
680 	wait_queue_head_t eos_waitq;    /* wake up when EOS arrives */
681 	wait_queue_head_t event_waitq;  /* wake up when the next decoder event arrives */
682 	wait_queue_head_t vsync_waitq;  /* wake up when the next decoder vsync arrives */
683 
684 
685 	/* Mailbox */
686 	struct ivtv_mailbox_data enc_mbox;              /* encoder mailboxes */
687 	struct ivtv_mailbox_data dec_mbox;              /* decoder mailboxes */
688 	struct ivtv_api_cache api_cache[256]; 		/* cached API commands */
689 
690 
691 	/* I2C */
692 	struct i2c_adapter i2c_adap;
693 	struct i2c_algo_bit_data i2c_algo;
694 	struct i2c_client i2c_client;
695 	int i2c_state;                  /* i2c bit state */
696 	struct mutex i2c_bus_lock;      /* lock i2c bus */
697 
698 	struct IR_i2c_init_data ir_i2c_init_data;
699 
700 	/* Program Index information */
701 	u32 pgm_info_offset;            /* start of pgm info in encoder memory */
702 	u32 pgm_info_num;               /* number of elements in the pgm cyclic buffer in encoder memory */
703 	u32 pgm_info_write_idx;         /* last index written by the card that was transferred to pgm_info[] */
704 	u32 pgm_info_read_idx;          /* last index in pgm_info read by the application */
705 	struct v4l2_enc_idx_entry pgm_info[IVTV_MAX_PGM_INDEX]; /* filled from the pgm cyclic buffer on the card */
706 
707 
708 	/* Miscellaneous */
709 	u32 open_id;			/* incremented each time an open occurs, is >= 1 */
710 	int search_pack_header;         /* 1 if ivtv_copy_buf_to_user() is scanning for a pack header (0xba) */
711 	int speed;                      /* current playback speed setting */
712 	u8 speed_mute_audio;            /* 1 if audio should be muted when fast forward */
713 	u64 mpg_data_received;          /* number of bytes received from the MPEG stream */
714 	u64 vbi_data_inserted;          /* number of VBI bytes inserted into the MPEG stream */
715 	u32 last_dec_timing[3];         /* cache last retrieved pts/scr/frame values */
716 	unsigned long dualwatch_jiffies;/* jiffies value of the previous dualwatch check */
717 	u32 dualwatch_stereo_mode;      /* current detected dualwatch stereo mode */
718 
719 
720 	/* VBI state info */
721 	struct vbi_info vbi;            /* VBI-specific data */
722 
723 
724 	/* YUV playback */
725 	struct yuv_playback_info yuv_info;              /* YUV playback data */
726 
727 
728 	/* OSD support */
729 	unsigned long osd_video_pbase;
730 	int osd_global_alpha_state;     /* 1 = global alpha is on */
731 	int osd_local_alpha_state;      /* 1 = local alpha is on */
732 	int osd_chroma_key_state;       /* 1 = chroma-keying is on */
733 	u8  osd_global_alpha;           /* current global alpha */
734 	u32 osd_chroma_key;             /* current chroma key */
735 	struct v4l2_rect osd_rect;      /* current OSD position and size */
736 	struct v4l2_rect main_rect;     /* current Main window position and size */
737 	struct osd_info *osd_info;      /* ivtvfb private OSD info */
738 	void (*ivtvfb_restore)(struct ivtv *itv); /* Used for a warm start */
739 };
740 
to_ivtv(struct v4l2_device * v4l2_dev)741 static inline struct ivtv *to_ivtv(struct v4l2_device *v4l2_dev)
742 {
743 	return container_of(v4l2_dev, struct ivtv, v4l2_dev);
744 }
745 
746 /* Globals */
747 extern int ivtv_first_minor;
748 
749 /*==============Prototypes==================*/
750 
751 /* Hardware/IRQ */
752 void ivtv_set_irq_mask(struct ivtv *itv, u32 mask);
753 void ivtv_clear_irq_mask(struct ivtv *itv, u32 mask);
754 
755 /* try to set output mode, return current mode. */
756 int ivtv_set_output_mode(struct ivtv *itv, int mode);
757 
758 /* return current output stream based on current mode */
759 struct ivtv_stream *ivtv_get_output_stream(struct ivtv *itv);
760 
761 /* Return non-zero if a signal is pending */
762 int ivtv_msleep_timeout(unsigned int msecs, int intr);
763 
764 /* Wait on queue, returns -EINTR if interrupted */
765 int ivtv_waitq(wait_queue_head_t *waitq);
766 
767 /* Read Hauppauge eeprom */
768 struct tveeprom; /* forward reference */
769 void ivtv_read_eeprom(struct ivtv *itv, struct tveeprom *tv);
770 
771 /* First-open initialization: load firmware, init cx25840, etc. */
772 int ivtv_init_on_first_open(struct ivtv *itv);
773 
774 /* Test if the current VBI mode is raw (1) or sliced (0) */
ivtv_raw_vbi(const struct ivtv * itv)775 static inline int ivtv_raw_vbi(const struct ivtv *itv)
776 {
777 	return itv->vbi.in.type == V4L2_BUF_TYPE_VBI_CAPTURE;
778 }
779 
780 /* This is a PCI post thing, where if the pci register is not read, then
781    the write doesn't always take effect right away. By reading back the
782    register any pending PCI writes will be performed (in order), and so
783    you can be sure that the writes are guaranteed to be done.
784 
785    Rarely needed, only in some timing sensitive cases.
786    Apparently if this is not done some motherboards seem
787    to kill the firmware and get into the broken state until computer is
788    rebooted. */
789 #define write_sync(val, reg) \
790 	do { writel(val, reg); readl(reg); } while (0)
791 
792 #define read_reg(reg) readl(itv->reg_mem + (reg))
793 #define write_reg(val, reg) writel(val, itv->reg_mem + (reg))
794 #define write_reg_sync(val, reg) \
795 	do { write_reg(val, reg); read_reg(reg); } while (0)
796 
797 #define read_enc(addr) readl(itv->enc_mem + (u32)(addr))
798 #define write_enc(val, addr) writel(val, itv->enc_mem + (u32)(addr))
799 #define write_enc_sync(val, addr) \
800 	do { write_enc(val, addr); read_enc(addr); } while (0)
801 
802 #define read_dec(addr) readl(itv->dec_mem + (u32)(addr))
803 #define write_dec(val, addr) writel(val, itv->dec_mem + (u32)(addr))
804 #define write_dec_sync(val, addr) \
805 	do { write_dec(val, addr); read_dec(addr); } while (0)
806 
807 /* Call the specified callback for all subdevs matching hw (if 0, then
808    match them all). Ignore any errors. */
809 #define ivtv_call_hw(itv, hw, o, f, args...) 				\
810 	do {								\
811 		struct v4l2_subdev *__sd;				\
812 		__v4l2_device_call_subdevs_p(&(itv)->v4l2_dev, __sd,	\
813 			!(hw) || (__sd->grp_id & (hw)), o, f , ##args);	\
814 	} while (0)
815 
816 #define ivtv_call_all(itv, o, f, args...) ivtv_call_hw(itv, 0, o, f , ##args)
817 
818 /* Call the specified callback for all subdevs matching hw (if 0, then
819    match them all). If the callback returns an error other than 0 or
820    -ENOIOCTLCMD, then return with that error code. */
821 #define ivtv_call_hw_err(itv, hw, o, f, args...)			\
822 ({									\
823 	struct v4l2_subdev *__sd;					\
824 	__v4l2_device_call_subdevs_until_err_p(&(itv)->v4l2_dev, __sd,	\
825 		!(hw) || (__sd->grp_id & (hw)), o, f , ##args);		\
826 })
827 
828 #define ivtv_call_all_err(itv, o, f, args...) ivtv_call_hw_err(itv, 0, o, f , ##args)
829 
830 #endif
831