1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 /*
3 * twl4030.h - header for TWL4030 PM and audio CODEC device
4 *
5 * Copyright (C) 2005-2006 Texas Instruments, Inc.
6 *
7 * Based on tlv320aic23.c:
8 * Copyright (c) by Kai Svahn <kai.svahn@nokia.com>
9 */
10
11 #ifndef __TWL_H_
12 #define __TWL_H_
13
14 #include <linux/types.h>
15 #include <linux/input/matrix_keypad.h>
16
17 /*
18 * Using the twl4030 core we address registers using a pair
19 * { module id, relative register offset }
20 * which that core then maps to the relevant
21 * { i2c slave, absolute register address }
22 *
23 * The module IDs are meaningful only to the twl4030 core code,
24 * which uses them as array indices to look up the first register
25 * address each module uses within a given i2c slave.
26 */
27
28 /* Module IDs for similar functionalities found in twl4030/twl6030 */
29 enum twl_module_ids {
30 TWL_MODULE_USB,
31 TWL_MODULE_PIH,
32 TWL_MODULE_MAIN_CHARGE,
33 TWL_MODULE_PM_MASTER,
34 TWL_MODULE_PM_RECEIVER,
35
36 TWL_MODULE_RTC,
37 TWL_MODULE_PWM,
38 TWL_MODULE_LED,
39 TWL_MODULE_SECURED_REG,
40
41 TWL_MODULE_LAST,
42 };
43
44 /* Modules only available in twl4030 series */
45 enum twl4030_module_ids {
46 TWL4030_MODULE_AUDIO_VOICE = TWL_MODULE_LAST,
47 TWL4030_MODULE_GPIO,
48 TWL4030_MODULE_INTBR,
49 TWL4030_MODULE_TEST,
50 TWL4030_MODULE_KEYPAD,
51
52 TWL4030_MODULE_MADC,
53 TWL4030_MODULE_INTERRUPTS,
54 TWL4030_MODULE_PRECHARGE,
55 TWL4030_MODULE_BACKUP,
56 TWL4030_MODULE_INT,
57
58 TWL5031_MODULE_ACCESSORY,
59 TWL5031_MODULE_INTERRUPTS,
60
61 TWL4030_MODULE_LAST,
62 };
63
64 /* Modules only available in twl6030 series */
65 enum twl6030_module_ids {
66 TWL6030_MODULE_ID0 = TWL_MODULE_LAST,
67 TWL6030_MODULE_ID1,
68 TWL6030_MODULE_ID2,
69 TWL6030_MODULE_GPADC,
70 TWL6030_MODULE_GASGAUGE,
71
72 /* A few extra registers before the registers shared with the 6030 */
73 TWL6032_MODULE_CHARGE,
74 TWL6030_MODULE_LAST,
75 };
76
77 /* Until the clients has been converted to use TWL_MODULE_LED */
78 #define TWL4030_MODULE_LED TWL_MODULE_LED
79
80 #define GPIO_INTR_OFFSET 0
81 #define KEYPAD_INTR_OFFSET 1
82 #define BCI_INTR_OFFSET 2
83 #define MADC_INTR_OFFSET 3
84 #define USB_INTR_OFFSET 4
85 #define CHARGERFAULT_INTR_OFFSET 5
86 #define BCI_PRES_INTR_OFFSET 9
87 #define USB_PRES_INTR_OFFSET 10
88 #define RTC_INTR_OFFSET 11
89
90 /*
91 * Offset from TWL6030_IRQ_BASE / pdata->irq_base
92 */
93 #define PWR_INTR_OFFSET 0
94 #define HOTDIE_INTR_OFFSET 12
95 #define SMPSLDO_INTR_OFFSET 13
96 #define BATDETECT_INTR_OFFSET 14
97 #define SIMDETECT_INTR_OFFSET 15
98 #define MMCDETECT_INTR_OFFSET 16
99 #define GASGAUGE_INTR_OFFSET 17
100 #define USBOTG_INTR_OFFSET 4
101 #define CHARGER_INTR_OFFSET 2
102 #define RSV_INTR_OFFSET 0
103
104 /* INT register offsets */
105 #define REG_INT_STS_A 0x00
106 #define REG_INT_STS_B 0x01
107 #define REG_INT_STS_C 0x02
108
109 #define REG_INT_MSK_LINE_A 0x03
110 #define REG_INT_MSK_LINE_B 0x04
111 #define REG_INT_MSK_LINE_C 0x05
112
113 #define REG_INT_MSK_STS_A 0x06
114 #define REG_INT_MSK_STS_B 0x07
115 #define REG_INT_MSK_STS_C 0x08
116
117 /* MASK INT REG GROUP A */
118 #define TWL6030_PWR_INT_MASK 0x07
119 #define TWL6030_RTC_INT_MASK 0x18
120 #define TWL6030_HOTDIE_INT_MASK 0x20
121 #define TWL6030_SMPSLDOA_INT_MASK 0xC0
122
123 /* MASK INT REG GROUP B */
124 #define TWL6030_SMPSLDOB_INT_MASK 0x01
125 #define TWL6030_BATDETECT_INT_MASK 0x02
126 #define TWL6030_SIMDETECT_INT_MASK 0x04
127 #define TWL6030_MMCDETECT_INT_MASK 0x08
128 #define TWL6030_GPADC_INT_MASK 0x60
129 #define TWL6030_GASGAUGE_INT_MASK 0x80
130
131 /* MASK INT REG GROUP C */
132 #define TWL6030_USBOTG_INT_MASK 0x0F
133 #define TWL6030_CHARGER_CTRL_INT_MASK 0x10
134 #define TWL6030_CHARGER_FAULT_INT_MASK 0x60
135
136 #define TWL6030_MMCCTRL 0xEE
137 #define VMMC_AUTO_OFF (0x1 << 3)
138 #define SW_FC (0x1 << 2)
139 #define STS_MMC 0x1
140
141 #define TWL6030_CFG_INPUT_PUPD3 0xF2
142 #define MMC_PU (0x1 << 3)
143 #define MMC_PD (0x1 << 2)
144
145 #define TWL_SIL_TYPE(rev) ((rev) & 0x00FFFFFF)
146 #define TWL_SIL_REV(rev) ((rev) >> 24)
147 #define TWL_SIL_5030 0x09002F
148 #define TWL5030_REV_1_0 0x00
149 #define TWL5030_REV_1_1 0x10
150 #define TWL5030_REV_1_2 0x30
151
152 #define TWL4030_CLASS_ID 0x4030
153 #define TWL6030_CLASS_ID 0x6030
154 unsigned int twl_rev(void);
155 #define GET_TWL_REV (twl_rev())
156 #define TWL_CLASS_IS(class, id) \
157 static inline int twl_class_is_ ##class(void) \
158 { \
159 return ((id) == (GET_TWL_REV)) ? 1 : 0; \
160 }
161
162 TWL_CLASS_IS(4030, TWL4030_CLASS_ID)
163 TWL_CLASS_IS(6030, TWL6030_CLASS_ID)
164
165 /* Set the regcache bypass for the regmap associated with the nodule */
166 int twl_set_regcache_bypass(u8 mod_no, bool enable);
167
168 /*
169 * Read and write several 8-bit registers at once.
170 */
171 int twl_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes);
172 int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes);
173
174 /*
175 * Read and write single 8-bit registers
176 */
twl_i2c_write_u8(u8 mod_no,u8 val,u8 reg)177 static inline int twl_i2c_write_u8(u8 mod_no, u8 val, u8 reg) {
178 return twl_i2c_write(mod_no, &val, reg, 1);
179 }
180
twl_i2c_read_u8(u8 mod_no,u8 * val,u8 reg)181 static inline int twl_i2c_read_u8(u8 mod_no, u8 *val, u8 reg) {
182 return twl_i2c_read(mod_no, val, reg, 1);
183 }
184
twl_i2c_write_u16(u8 mod_no,u16 val,u8 reg)185 static inline int twl_i2c_write_u16(u8 mod_no, u16 val, u8 reg) {
186 __le16 value;
187
188 value = cpu_to_le16(val);
189 return twl_i2c_write(mod_no, (u8 *) &value, reg, 2);
190 }
191
twl_i2c_read_u16(u8 mod_no,u16 * val,u8 reg)192 static inline int twl_i2c_read_u16(u8 mod_no, u16 *val, u8 reg) {
193 int ret;
194 __le16 value;
195
196 ret = twl_i2c_read(mod_no, (u8 *) &value, reg, 2);
197 *val = le16_to_cpu(value);
198 return ret;
199 }
200
201 int twl_get_type(void);
202 int twl_get_version(void);
203 int twl_get_hfclk_rate(void);
204
205 int twl6030_interrupt_unmask(u8 bit_mask, u8 offset);
206 int twl6030_interrupt_mask(u8 bit_mask, u8 offset);
207
208 /*----------------------------------------------------------------------*/
209
210 /*
211 * NOTE: at up to 1024 registers, this is a big chip.
212 *
213 * Avoid putting register declarations in this file, instead of into
214 * a driver-private file, unless some of the registers in a block
215 * need to be shared with other drivers. One example is blocks that
216 * have Secondary IRQ Handler (SIH) registers.
217 */
218
219 #define TWL4030_SIH_CTRL_EXCLEN_MASK BIT(0)
220 #define TWL4030_SIH_CTRL_PENDDIS_MASK BIT(1)
221 #define TWL4030_SIH_CTRL_COR_MASK BIT(2)
222
223 /*----------------------------------------------------------------------*/
224
225 /*
226 * GPIO Block Register offsets (use TWL4030_MODULE_GPIO)
227 */
228
229 #define REG_GPIODATAIN1 0x0
230 #define REG_GPIODATAIN2 0x1
231 #define REG_GPIODATAIN3 0x2
232 #define REG_GPIODATADIR1 0x3
233 #define REG_GPIODATADIR2 0x4
234 #define REG_GPIODATADIR3 0x5
235 #define REG_GPIODATAOUT1 0x6
236 #define REG_GPIODATAOUT2 0x7
237 #define REG_GPIODATAOUT3 0x8
238 #define REG_CLEARGPIODATAOUT1 0x9
239 #define REG_CLEARGPIODATAOUT2 0xA
240 #define REG_CLEARGPIODATAOUT3 0xB
241 #define REG_SETGPIODATAOUT1 0xC
242 #define REG_SETGPIODATAOUT2 0xD
243 #define REG_SETGPIODATAOUT3 0xE
244 #define REG_GPIO_DEBEN1 0xF
245 #define REG_GPIO_DEBEN2 0x10
246 #define REG_GPIO_DEBEN3 0x11
247 #define REG_GPIO_CTRL 0x12
248 #define REG_GPIOPUPDCTR1 0x13
249 #define REG_GPIOPUPDCTR2 0x14
250 #define REG_GPIOPUPDCTR3 0x15
251 #define REG_GPIOPUPDCTR4 0x16
252 #define REG_GPIOPUPDCTR5 0x17
253 #define REG_GPIO_ISR1A 0x19
254 #define REG_GPIO_ISR2A 0x1A
255 #define REG_GPIO_ISR3A 0x1B
256 #define REG_GPIO_IMR1A 0x1C
257 #define REG_GPIO_IMR2A 0x1D
258 #define REG_GPIO_IMR3A 0x1E
259 #define REG_GPIO_ISR1B 0x1F
260 #define REG_GPIO_ISR2B 0x20
261 #define REG_GPIO_ISR3B 0x21
262 #define REG_GPIO_IMR1B 0x22
263 #define REG_GPIO_IMR2B 0x23
264 #define REG_GPIO_IMR3B 0x24
265 #define REG_GPIO_EDR1 0x28
266 #define REG_GPIO_EDR2 0x29
267 #define REG_GPIO_EDR3 0x2A
268 #define REG_GPIO_EDR4 0x2B
269 #define REG_GPIO_EDR5 0x2C
270 #define REG_GPIO_SIH_CTRL 0x2D
271
272 /* Up to 18 signals are available as GPIOs, when their
273 * pins are not assigned to another use (such as ULPI/USB).
274 */
275 #define TWL4030_GPIO_MAX 18
276
277 /*----------------------------------------------------------------------*/
278
279 /*Interface Bit Register (INTBR) offsets
280 *(Use TWL_4030_MODULE_INTBR)
281 */
282
283 #define REG_IDCODE_7_0 0x00
284 #define REG_IDCODE_15_8 0x01
285 #define REG_IDCODE_16_23 0x02
286 #define REG_IDCODE_31_24 0x03
287 #define REG_GPPUPDCTR1 0x0F
288 #define REG_UNLOCK_TEST_REG 0x12
289
290 /*I2C1 and I2C4(SR) SDA/SCL pull-up control bits */
291
292 #define I2C_SCL_CTRL_PU BIT(0)
293 #define I2C_SDA_CTRL_PU BIT(2)
294 #define SR_I2C_SCL_CTRL_PU BIT(4)
295 #define SR_I2C_SDA_CTRL_PU BIT(6)
296
297 #define TWL_EEPROM_R_UNLOCK 0x49
298
299 /*----------------------------------------------------------------------*/
300
301 /*
302 * Keypad register offsets (use TWL4030_MODULE_KEYPAD)
303 * ... SIH/interrupt only
304 */
305
306 #define TWL4030_KEYPAD_KEYP_ISR1 0x11
307 #define TWL4030_KEYPAD_KEYP_IMR1 0x12
308 #define TWL4030_KEYPAD_KEYP_ISR2 0x13
309 #define TWL4030_KEYPAD_KEYP_IMR2 0x14
310 #define TWL4030_KEYPAD_KEYP_SIR 0x15 /* test register */
311 #define TWL4030_KEYPAD_KEYP_EDR 0x16
312 #define TWL4030_KEYPAD_KEYP_SIH_CTRL 0x17
313
314 /*----------------------------------------------------------------------*/
315
316 /*
317 * Multichannel ADC register offsets (use TWL4030_MODULE_MADC)
318 * ... SIH/interrupt only
319 */
320
321 #define TWL4030_MADC_ISR1 0x61
322 #define TWL4030_MADC_IMR1 0x62
323 #define TWL4030_MADC_ISR2 0x63
324 #define TWL4030_MADC_IMR2 0x64
325 #define TWL4030_MADC_SIR 0x65 /* test register */
326 #define TWL4030_MADC_EDR 0x66
327 #define TWL4030_MADC_SIH_CTRL 0x67
328
329 /*----------------------------------------------------------------------*/
330
331 /*
332 * Battery charger register offsets (use TWL4030_MODULE_INTERRUPTS)
333 */
334
335 #define TWL4030_INTERRUPTS_BCIISR1A 0x0
336 #define TWL4030_INTERRUPTS_BCIISR2A 0x1
337 #define TWL4030_INTERRUPTS_BCIIMR1A 0x2
338 #define TWL4030_INTERRUPTS_BCIIMR2A 0x3
339 #define TWL4030_INTERRUPTS_BCIISR1B 0x4
340 #define TWL4030_INTERRUPTS_BCIISR2B 0x5
341 #define TWL4030_INTERRUPTS_BCIIMR1B 0x6
342 #define TWL4030_INTERRUPTS_BCIIMR2B 0x7
343 #define TWL4030_INTERRUPTS_BCISIR1 0x8 /* test register */
344 #define TWL4030_INTERRUPTS_BCISIR2 0x9 /* test register */
345 #define TWL4030_INTERRUPTS_BCIEDR1 0xa
346 #define TWL4030_INTERRUPTS_BCIEDR2 0xb
347 #define TWL4030_INTERRUPTS_BCIEDR3 0xc
348 #define TWL4030_INTERRUPTS_BCISIHCTRL 0xd
349
350 /*----------------------------------------------------------------------*/
351
352 /*
353 * Power Interrupt block register offsets (use TWL4030_MODULE_INT)
354 */
355
356 #define TWL4030_INT_PWR_ISR1 0x0
357 #define TWL4030_INT_PWR_IMR1 0x1
358 #define TWL4030_INT_PWR_ISR2 0x2
359 #define TWL4030_INT_PWR_IMR2 0x3
360 #define TWL4030_INT_PWR_SIR 0x4 /* test register */
361 #define TWL4030_INT_PWR_EDR1 0x5
362 #define TWL4030_INT_PWR_EDR2 0x6
363 #define TWL4030_INT_PWR_SIH_CTRL 0x7
364
365 /*----------------------------------------------------------------------*/
366
367 /*
368 * Accessory Interrupts
369 */
370 #define TWL5031_ACIIMR_LSB 0x05
371 #define TWL5031_ACIIMR_MSB 0x06
372 #define TWL5031_ACIIDR_LSB 0x07
373 #define TWL5031_ACIIDR_MSB 0x08
374 #define TWL5031_ACCISR1 0x0F
375 #define TWL5031_ACCIMR1 0x10
376 #define TWL5031_ACCISR2 0x11
377 #define TWL5031_ACCIMR2 0x12
378 #define TWL5031_ACCSIR 0x13
379 #define TWL5031_ACCEDR1 0x14
380 #define TWL5031_ACCSIHCTRL 0x15
381
382 /*----------------------------------------------------------------------*/
383
384 /*
385 * Battery Charger Controller
386 */
387
388 #define TWL5031_INTERRUPTS_BCIISR1 0x0
389 #define TWL5031_INTERRUPTS_BCIIMR1 0x1
390 #define TWL5031_INTERRUPTS_BCIISR2 0x2
391 #define TWL5031_INTERRUPTS_BCIIMR2 0x3
392 #define TWL5031_INTERRUPTS_BCISIR 0x4
393 #define TWL5031_INTERRUPTS_BCIEDR1 0x5
394 #define TWL5031_INTERRUPTS_BCIEDR2 0x6
395 #define TWL5031_INTERRUPTS_BCISIHCTRL 0x7
396
397 /*----------------------------------------------------------------------*/
398
399 /*
400 * PM Master module register offsets (use TWL4030_MODULE_PM_MASTER)
401 */
402
403 #define TWL4030_PM_MASTER_CFG_P1_TRANSITION 0x00
404 #define TWL4030_PM_MASTER_CFG_P2_TRANSITION 0x01
405 #define TWL4030_PM_MASTER_CFG_P3_TRANSITION 0x02
406 #define TWL4030_PM_MASTER_CFG_P123_TRANSITION 0x03
407 #define TWL4030_PM_MASTER_STS_BOOT 0x04
408 #define TWL4030_PM_MASTER_CFG_BOOT 0x05
409 #define TWL4030_PM_MASTER_SHUNDAN 0x06
410 #define TWL4030_PM_MASTER_BOOT_BCI 0x07
411 #define TWL4030_PM_MASTER_CFG_PWRANA1 0x08
412 #define TWL4030_PM_MASTER_CFG_PWRANA2 0x09
413 #define TWL4030_PM_MASTER_BACKUP_MISC_STS 0x0b
414 #define TWL4030_PM_MASTER_BACKUP_MISC_CFG 0x0c
415 #define TWL4030_PM_MASTER_BACKUP_MISC_TST 0x0d
416 #define TWL4030_PM_MASTER_PROTECT_KEY 0x0e
417 #define TWL4030_PM_MASTER_STS_HW_CONDITIONS 0x0f
418 #define TWL4030_PM_MASTER_P1_SW_EVENTS 0x10
419 #define TWL4030_PM_MASTER_P2_SW_EVENTS 0x11
420 #define TWL4030_PM_MASTER_P3_SW_EVENTS 0x12
421 #define TWL4030_PM_MASTER_STS_P123_STATE 0x13
422 #define TWL4030_PM_MASTER_PB_CFG 0x14
423 #define TWL4030_PM_MASTER_PB_WORD_MSB 0x15
424 #define TWL4030_PM_MASTER_PB_WORD_LSB 0x16
425 #define TWL4030_PM_MASTER_SEQ_ADD_W2P 0x1c
426 #define TWL4030_PM_MASTER_SEQ_ADD_P2A 0x1d
427 #define TWL4030_PM_MASTER_SEQ_ADD_A2W 0x1e
428 #define TWL4030_PM_MASTER_SEQ_ADD_A2S 0x1f
429 #define TWL4030_PM_MASTER_SEQ_ADD_S2A12 0x20
430 #define TWL4030_PM_MASTER_SEQ_ADD_S2A3 0x21
431 #define TWL4030_PM_MASTER_SEQ_ADD_WARM 0x22
432 #define TWL4030_PM_MASTER_MEMORY_ADDRESS 0x23
433 #define TWL4030_PM_MASTER_MEMORY_DATA 0x24
434
435 #define TWL4030_PM_MASTER_KEY_CFG1 0xc0
436 #define TWL4030_PM_MASTER_KEY_CFG2 0x0c
437
438 #define TWL4030_PM_MASTER_KEY_TST1 0xe0
439 #define TWL4030_PM_MASTER_KEY_TST2 0x0e
440
441 #define TWL4030_PM_MASTER_GLOBAL_TST 0xb6
442
443 #define TWL6030_PHOENIX_DEV_ON 0x06
444 /*----------------------------------------------------------------------*/
445
446 /* Power bus message definitions */
447
448 /* The TWL4030/5030 splits its power-management resources (the various
449 * regulators, clock and reset lines) into 3 processor groups - P1, P2 and
450 * P3. These groups can then be configured to transition between sleep, wait-on
451 * and active states by sending messages to the power bus. See Section 5.4.2
452 * Power Resources of TWL4030 TRM
453 */
454
455 /* Processor groups */
456 #define DEV_GRP_NULL 0x0
457 #define DEV_GRP_P1 0x1 /* P1: all OMAP devices */
458 #define DEV_GRP_P2 0x2 /* P2: all Modem devices */
459 #define DEV_GRP_P3 0x4 /* P3: all peripheral devices */
460
461 /* Resource groups */
462 #define RES_GRP_RES 0x0 /* Reserved */
463 #define RES_GRP_PP 0x1 /* Power providers */
464 #define RES_GRP_RC 0x2 /* Reset and control */
465 #define RES_GRP_PP_RC 0x3
466 #define RES_GRP_PR 0x4 /* Power references */
467 #define RES_GRP_PP_PR 0x5
468 #define RES_GRP_RC_PR 0x6
469 #define RES_GRP_ALL 0x7 /* All resource groups */
470
471 #define RES_TYPE2_R0 0x0
472 #define RES_TYPE2_R1 0x1
473 #define RES_TYPE2_R2 0x2
474
475 #define RES_TYPE_R0 0x0
476 #define RES_TYPE_ALL 0x7
477
478 /* Resource states */
479 #define RES_STATE_WRST 0xF
480 #define RES_STATE_ACTIVE 0xE
481 #define RES_STATE_SLEEP 0x8
482 #define RES_STATE_OFF 0x0
483
484 /* Power resources */
485
486 /* Power providers */
487 #define RES_VAUX1 1
488 #define RES_VAUX2 2
489 #define RES_VAUX3 3
490 #define RES_VAUX4 4
491 #define RES_VMMC1 5
492 #define RES_VMMC2 6
493 #define RES_VPLL1 7
494 #define RES_VPLL2 8
495 #define RES_VSIM 9
496 #define RES_VDAC 10
497 #define RES_VINTANA1 11
498 #define RES_VINTANA2 12
499 #define RES_VINTDIG 13
500 #define RES_VIO 14
501 #define RES_VDD1 15
502 #define RES_VDD2 16
503 #define RES_VUSB_1V5 17
504 #define RES_VUSB_1V8 18
505 #define RES_VUSB_3V1 19
506 #define RES_VUSBCP 20
507 #define RES_REGEN 21
508 /* Reset and control */
509 #define RES_NRES_PWRON 22
510 #define RES_CLKEN 23
511 #define RES_SYSEN 24
512 #define RES_HFCLKOUT 25
513 #define RES_32KCLKOUT 26
514 #define RES_RESET 27
515 /* Power Reference */
516 #define RES_MAIN_REF 28
517
518 #define TOTAL_RESOURCES 28
519 /*
520 * Power Bus Message Format ... these can be sent individually by Linux,
521 * but are usually part of downloaded scripts that are run when various
522 * power events are triggered.
523 *
524 * Broadcast Message (16 Bits):
525 * DEV_GRP[15:13] MT[12] RES_GRP[11:9] RES_TYPE2[8:7] RES_TYPE[6:4]
526 * RES_STATE[3:0]
527 *
528 * Singular Message (16 Bits):
529 * DEV_GRP[15:13] MT[12] RES_ID[11:4] RES_STATE[3:0]
530 */
531
532 #define MSG_BROADCAST(devgrp, grp, type, type2, state) \
533 ( (devgrp) << 13 | 1 << 12 | (grp) << 9 | (type2) << 7 \
534 | (type) << 4 | (state))
535
536 #define MSG_SINGULAR(devgrp, id, state) \
537 ((devgrp) << 13 | 0 << 12 | (id) << 4 | (state))
538
539 #define MSG_BROADCAST_ALL(devgrp, state) \
540 ((devgrp) << 5 | (state))
541
542 #define MSG_BROADCAST_REF MSG_BROADCAST_ALL
543 #define MSG_BROADCAST_PROV MSG_BROADCAST_ALL
544 #define MSG_BROADCAST__CLK_RST MSG_BROADCAST_ALL
545 /*----------------------------------------------------------------------*/
546
547 struct twl4030_clock_init_data {
548 bool ck32k_lowpwr_enable;
549 };
550
551 struct twl4030_bci_platform_data {
552 int *battery_tmp_tbl;
553 unsigned int tblsize;
554 int bb_uvolt; /* voltage to charge backup battery */
555 int bb_uamp; /* current for backup battery charging */
556 };
557
558 /* TWL4030_GPIO_MAX (18) GPIOs, with interrupts */
559 struct twl4030_gpio_platform_data {
560 /* package the two LED signals as output-only GPIOs? */
561 bool use_leds;
562
563 /* gpio-n should control VMMC(n+1) if BIT(n) in mmc_cd is set */
564 u8 mmc_cd;
565
566 /* if BIT(N) is set, or VMMC(n+1) is linked, debounce GPIO-N */
567 u32 debounce;
568
569 /* For gpio-N, bit (1 << N) in "pullups" is set if that pullup
570 * should be enabled. Else, if that bit is set in "pulldowns",
571 * that pulldown is enabled. Don't waste power by letting any
572 * digital inputs float...
573 */
574 u32 pullups;
575 u32 pulldowns;
576 };
577
578 struct twl4030_madc_platform_data {
579 int irq_line;
580 };
581
582 /* Boards have unique mappings of {row, col} --> keycode.
583 * Column and row are 8 bits each, but range only from 0..7.
584 * a PERSISTENT_KEY is "always on" and never reported.
585 */
586 #define PERSISTENT_KEY(r, c) KEY((r), (c), KEY_RESERVED)
587
588 struct twl4030_keypad_data {
589 const struct matrix_keymap_data *keymap_data;
590 unsigned rows;
591 unsigned cols;
592 bool rep;
593 };
594
595 enum twl4030_usb_mode {
596 T2_USB_MODE_ULPI = 1,
597 T2_USB_MODE_CEA2011_3PIN = 2,
598 };
599
600 struct twl4030_usb_data {
601 enum twl4030_usb_mode usb_mode;
602 unsigned long features;
603
604 int (*phy_init)(struct device *dev);
605 int (*phy_exit)(struct device *dev);
606 /* Power on/off the PHY */
607 int (*phy_power)(struct device *dev, int iD, int on);
608 /* enable/disable phy clocks */
609 int (*phy_set_clock)(struct device *dev, int on);
610 /* suspend/resume of phy */
611 int (*phy_suspend)(struct device *dev, int suspend);
612 };
613
614 struct twl4030_ins {
615 u16 pmb_message;
616 u8 delay;
617 };
618
619 struct twl4030_script {
620 struct twl4030_ins *script;
621 unsigned size;
622 u8 flags;
623 #define TWL4030_WRST_SCRIPT (1<<0)
624 #define TWL4030_WAKEUP12_SCRIPT (1<<1)
625 #define TWL4030_WAKEUP3_SCRIPT (1<<2)
626 #define TWL4030_SLEEP_SCRIPT (1<<3)
627 };
628
629 struct twl4030_resconfig {
630 u8 resource;
631 u8 devgroup; /* Processor group that Power resource belongs to */
632 u8 type; /* Power resource addressed, 6 / broadcast message */
633 u8 type2; /* Power resource addressed, 3 / broadcast message */
634 u8 remap_off; /* off state remapping */
635 u8 remap_sleep; /* sleep state remapping */
636 };
637
638 struct twl4030_power_data {
639 struct twl4030_script **scripts;
640 unsigned num;
641 struct twl4030_resconfig *resource_config;
642 struct twl4030_resconfig *board_config;
643 #define TWL4030_RESCONFIG_UNDEF ((u8)-1)
644 bool use_poweroff; /* Board is wired for TWL poweroff */
645 bool ac_charger_quirk; /* Disable AC charger on board */
646 };
647
648 extern int twl4030_remove_script(u8 flags);
649 extern void twl4030_power_off(void);
650
651 struct twl4030_codec_data {
652 unsigned int digimic_delay; /* in ms */
653 unsigned int ramp_delay_value;
654 unsigned int offset_cncl_path;
655 unsigned int hs_extmute:1;
656 int hs_extmute_gpio;
657 };
658
659 struct twl4030_vibra_data {
660 unsigned int coexist;
661 };
662
663 struct twl4030_audio_data {
664 unsigned int audio_mclk;
665 struct twl4030_codec_data *codec;
666 struct twl4030_vibra_data *vibra;
667
668 /* twl6040 */
669 int audpwron_gpio; /* audio power-on gpio */
670 int naudint_irq; /* audio interrupt */
671 unsigned int irq_base;
672 };
673
674 struct twl_regulator_driver_data {
675 int (*set_voltage)(void *data, int target_uV);
676 int (*get_voltage)(void *data);
677 void *data;
678 unsigned long features;
679 };
680 /* chip-specific feature flags, for twl_regulator_driver_data.features */
681 #define TWL4030_VAUX2 BIT(0) /* pre-5030 voltage ranges */
682 #define TPS_SUBSET BIT(1) /* tps659[23]0 have fewer LDOs */
683 #define TWL5031 BIT(2) /* twl5031 has different registers */
684 #define TWL6030_CLASS BIT(3) /* TWL6030 class */
685 #define TWL6032_SUBCLASS BIT(4) /* TWL6032 has changed registers */
686 #define TWL4030_ALLOW_UNSUPPORTED BIT(5) /* Some voltages are possible
687 * but not officially supported.
688 * This flag is necessary to
689 * enable them.
690 */
691
692 /*----------------------------------------------------------------------*/
693
694 int twl4030_sih_setup(struct device *dev, int module, int irq_base);
695
696 /* Offsets to Power Registers */
697 #define TWL4030_VDAC_DEV_GRP 0x3B
698 #define TWL4030_VDAC_DEDICATED 0x3E
699 #define TWL4030_VAUX1_DEV_GRP 0x17
700 #define TWL4030_VAUX1_DEDICATED 0x1A
701 #define TWL4030_VAUX2_DEV_GRP 0x1B
702 #define TWL4030_VAUX2_DEDICATED 0x1E
703 #define TWL4030_VAUX3_DEV_GRP 0x1F
704 #define TWL4030_VAUX3_DEDICATED 0x22
705
706 /*----------------------------------------------------------------------*/
707
708 /* Linux-specific regulator identifiers ... for now, we only support
709 * the LDOs, and leave the three buck converters alone. VDD1 and VDD2
710 * need to tie into hardware based voltage scaling (cpufreq etc), while
711 * VIO is generally fixed.
712 */
713
714 /* TWL4030 SMPS/LDO's */
715 /* EXTERNAL dc-to-dc buck converters */
716 #define TWL4030_REG_VDD1 0
717 #define TWL4030_REG_VDD2 1
718 #define TWL4030_REG_VIO 2
719
720 /* EXTERNAL LDOs */
721 #define TWL4030_REG_VDAC 3
722 #define TWL4030_REG_VPLL1 4
723 #define TWL4030_REG_VPLL2 5 /* not on all chips */
724 #define TWL4030_REG_VMMC1 6
725 #define TWL4030_REG_VMMC2 7 /* not on all chips */
726 #define TWL4030_REG_VSIM 8 /* not on all chips */
727 #define TWL4030_REG_VAUX1 9 /* not on all chips */
728 #define TWL4030_REG_VAUX2_4030 10 /* (twl4030-specific) */
729 #define TWL4030_REG_VAUX2 11 /* (twl5030 and newer) */
730 #define TWL4030_REG_VAUX3 12 /* not on all chips */
731 #define TWL4030_REG_VAUX4 13 /* not on all chips */
732
733 /* INTERNAL LDOs */
734 #define TWL4030_REG_VINTANA1 14
735 #define TWL4030_REG_VINTANA2 15
736 #define TWL4030_REG_VINTDIG 16
737 #define TWL4030_REG_VUSB1V5 17
738 #define TWL4030_REG_VUSB1V8 18
739 #define TWL4030_REG_VUSB3V1 19
740
741 /* TWL6030 SMPS/LDO's */
742 /* EXTERNAL dc-to-dc buck convertor controllable via SR */
743 #define TWL6030_REG_VDD1 30
744 #define TWL6030_REG_VDD2 31
745 #define TWL6030_REG_VDD3 32
746
747 /* Non SR compliant dc-to-dc buck convertors */
748 #define TWL6030_REG_VMEM 33
749 #define TWL6030_REG_V2V1 34
750 #define TWL6030_REG_V1V29 35
751 #define TWL6030_REG_V1V8 36
752
753 /* EXTERNAL LDOs */
754 #define TWL6030_REG_VAUX1_6030 37
755 #define TWL6030_REG_VAUX2_6030 38
756 #define TWL6030_REG_VAUX3_6030 39
757 #define TWL6030_REG_VMMC 40
758 #define TWL6030_REG_VPP 41
759 #define TWL6030_REG_VUSIM 42
760 #define TWL6030_REG_VANA 43
761 #define TWL6030_REG_VCXIO 44
762 #define TWL6030_REG_VDAC 45
763 #define TWL6030_REG_VUSB 46
764
765 /* INTERNAL LDOs */
766 #define TWL6030_REG_VRTC 47
767 #define TWL6030_REG_CLK32KG 48
768
769 /* LDOs on 6025 have different names */
770 #define TWL6032_REG_LDO2 49
771 #define TWL6032_REG_LDO4 50
772 #define TWL6032_REG_LDO3 51
773 #define TWL6032_REG_LDO5 52
774 #define TWL6032_REG_LDO1 53
775 #define TWL6032_REG_LDO7 54
776 #define TWL6032_REG_LDO6 55
777 #define TWL6032_REG_LDOLN 56
778 #define TWL6032_REG_LDOUSB 57
779
780 /* 6025 DCDC supplies */
781 #define TWL6032_REG_SMPS3 58
782 #define TWL6032_REG_SMPS4 59
783 #define TWL6032_REG_VIO 60
784
785
786 #endif /* End of __TWL4030_H */
787