1 // SPDX-License-Identifier: GPL-2.0-only
2 #include <linux/export.h>
3 #include <linux/bitops.h>
4 #include <linux/elf.h>
5 #include <linux/mm.h>
6 #include <linux/kvm_types.h>
7 #include <linux/io.h>
8 #include <linux/sched.h>
9 #include <linux/sched/clock.h>
10 #include <linux/random.h>
11 #include <linux/topology.h>
12 #include <linux/platform_data/x86/amd-fch.h>
13 #include <asm/processor.h>
14 #include <asm/apic.h>
15 #include <asm/cacheinfo.h>
16 #include <asm/cpu.h>
17 #include <asm/cpu_device_id.h>
18 #include <asm/spec-ctrl.h>
19 #include <asm/smp.h>
20 #include <asm/numa.h>
21 #include <asm/pci-direct.h>
22 #include <asm/delay.h>
23 #include <asm/debugreg.h>
24 #include <asm/resctrl.h>
25 #include <asm/msr.h>
26 #include <asm/sev.h>
27
28 #ifdef CONFIG_X86_64
29 # include <asm/mmconfig.h>
30 #endif
31
32 #include "cpu.h"
33
34 u16 invlpgb_count_max __ro_after_init = 1;
35
rdmsrq_amd_safe(unsigned msr,u64 * p)36 static inline int rdmsrq_amd_safe(unsigned msr, u64 *p)
37 {
38 u32 gprs[8] = { 0 };
39 int err;
40
41 WARN_ONCE((boot_cpu_data.x86 != 0xf),
42 "%s should only be used on K8!\n", __func__);
43
44 gprs[1] = msr;
45 gprs[7] = 0x9c5a203a;
46
47 err = rdmsr_safe_regs(gprs);
48
49 *p = gprs[0] | ((u64)gprs[2] << 32);
50
51 return err;
52 }
53
wrmsrq_amd_safe(unsigned msr,u64 val)54 static inline int wrmsrq_amd_safe(unsigned msr, u64 val)
55 {
56 u32 gprs[8] = { 0 };
57
58 WARN_ONCE((boot_cpu_data.x86 != 0xf),
59 "%s should only be used on K8!\n", __func__);
60
61 gprs[0] = (u32)val;
62 gprs[1] = msr;
63 gprs[2] = val >> 32;
64 gprs[7] = 0x9c5a203a;
65
66 return wrmsr_safe_regs(gprs);
67 }
68
69 /*
70 * B step AMD K6 before B 9730xxxx have hardware bugs that can cause
71 * misexecution of code under Linux. Owners of such processors should
72 * contact AMD for precise details and a CPU swap.
73 *
74 * See http://www.multimania.com/poulot/k6bug.html
75 * and section 2.6.2 of "AMD-K6 Processor Revision Guide - Model 6"
76 * (Publication # 21266 Issue Date: August 1998)
77 *
78 * The following test is erm.. interesting. AMD neglected to up
79 * the chip setting when fixing the bug but they also tweaked some
80 * performance at the same time..
81 */
82
83 #ifdef CONFIG_X86_32
84 extern __visible void vide(void);
85 __asm__(".text\n"
86 ".globl vide\n"
87 ".type vide, @function\n"
88 ".align 4\n"
89 "vide: ret\n");
90 #endif
91
init_amd_k5(struct cpuinfo_x86 * c)92 static void init_amd_k5(struct cpuinfo_x86 *c)
93 {
94 #ifdef CONFIG_X86_32
95 /*
96 * General Systems BIOSen alias the cpu frequency registers
97 * of the Elan at 0x000df000. Unfortunately, one of the Linux
98 * drivers subsequently pokes it, and changes the CPU speed.
99 * Workaround : Remove the unneeded alias.
100 */
101 #define CBAR (0xfffc) /* Configuration Base Address (32-bit) */
102 #define CBAR_ENB (0x80000000)
103 #define CBAR_KEY (0X000000CB)
104 if (c->x86_model == 9 || c->x86_model == 10) {
105 if (inl(CBAR) & CBAR_ENB)
106 outl(0 | CBAR_KEY, CBAR);
107 }
108 #endif
109 }
110
init_amd_k6(struct cpuinfo_x86 * c)111 static void init_amd_k6(struct cpuinfo_x86 *c)
112 {
113 #ifdef CONFIG_X86_32
114 u32 l, h;
115 int mbytes = get_num_physpages() >> (20-PAGE_SHIFT);
116
117 if (c->x86_model < 6) {
118 /* Based on AMD doc 20734R - June 2000 */
119 if (c->x86_model == 0) {
120 clear_cpu_cap(c, X86_FEATURE_APIC);
121 set_cpu_cap(c, X86_FEATURE_PGE);
122 }
123 return;
124 }
125
126 if (c->x86_model == 6 && c->x86_stepping == 1) {
127 const int K6_BUG_LOOP = 1000000;
128 int n;
129 void (*f_vide)(void);
130 u64 d, d2;
131
132 pr_info("AMD K6 stepping B detected - ");
133
134 /*
135 * It looks like AMD fixed the 2.6.2 bug and improved indirect
136 * calls at the same time.
137 */
138
139 n = K6_BUG_LOOP;
140 f_vide = vide;
141 OPTIMIZER_HIDE_VAR(f_vide);
142 d = rdtsc();
143 while (n--)
144 f_vide();
145 d2 = rdtsc();
146 d = d2-d;
147
148 if (d > 20*K6_BUG_LOOP)
149 pr_cont("system stability may be impaired when more than 32 MB are used.\n");
150 else
151 pr_cont("probably OK (after B9730xxxx).\n");
152 }
153
154 /* K6 with old style WHCR */
155 if (c->x86_model < 8 ||
156 (c->x86_model == 8 && c->x86_stepping < 8)) {
157 /* We can only write allocate on the low 508Mb */
158 if (mbytes > 508)
159 mbytes = 508;
160
161 rdmsr(MSR_K6_WHCR, l, h);
162 if ((l&0x0000FFFF) == 0) {
163 unsigned long flags;
164 l = (1<<0)|((mbytes/4)<<1);
165 local_irq_save(flags);
166 wbinvd();
167 wrmsr(MSR_K6_WHCR, l, h);
168 local_irq_restore(flags);
169 pr_info("Enabling old style K6 write allocation for %d Mb\n",
170 mbytes);
171 }
172 return;
173 }
174
175 if ((c->x86_model == 8 && c->x86_stepping > 7) ||
176 c->x86_model == 9 || c->x86_model == 13) {
177 /* The more serious chips .. */
178
179 if (mbytes > 4092)
180 mbytes = 4092;
181
182 rdmsr(MSR_K6_WHCR, l, h);
183 if ((l&0xFFFF0000) == 0) {
184 unsigned long flags;
185 l = ((mbytes>>2)<<22)|(1<<16);
186 local_irq_save(flags);
187 wbinvd();
188 wrmsr(MSR_K6_WHCR, l, h);
189 local_irq_restore(flags);
190 pr_info("Enabling new style K6 write allocation for %d Mb\n",
191 mbytes);
192 }
193
194 return;
195 }
196
197 if (c->x86_model == 10) {
198 /* AMD Geode LX is model 10 */
199 /* placeholder for any needed mods */
200 return;
201 }
202 #endif
203 }
204
init_amd_k7(struct cpuinfo_x86 * c)205 static void init_amd_k7(struct cpuinfo_x86 *c)
206 {
207 #ifdef CONFIG_X86_32
208 u32 l, h;
209
210 /*
211 * Bit 15 of Athlon specific MSR 15, needs to be 0
212 * to enable SSE on Palomino/Morgan/Barton CPU's.
213 * If the BIOS didn't enable it already, enable it here.
214 */
215 if (c->x86_model >= 6 && c->x86_model <= 10) {
216 if (!cpu_has(c, X86_FEATURE_XMM)) {
217 pr_info("Enabling disabled K7/SSE Support.\n");
218 msr_clear_bit(MSR_K7_HWCR, 15);
219 set_cpu_cap(c, X86_FEATURE_XMM);
220 }
221 }
222
223 /*
224 * It's been determined by AMD that Athlons since model 8 stepping 1
225 * are more robust with CLK_CTL set to 200xxxxx instead of 600xxxxx
226 * As per AMD technical note 27212 0.2
227 */
228 if ((c->x86_model == 8 && c->x86_stepping >= 1) || (c->x86_model > 8)) {
229 rdmsr(MSR_K7_CLK_CTL, l, h);
230 if ((l & 0xfff00000) != 0x20000000) {
231 pr_info("CPU: CLK_CTL MSR was %x. Reprogramming to %x\n",
232 l, ((l & 0x000fffff)|0x20000000));
233 wrmsr(MSR_K7_CLK_CTL, (l & 0x000fffff)|0x20000000, h);
234 }
235 }
236
237 /* calling is from identify_secondary_cpu() ? */
238 if (!c->cpu_index)
239 return;
240
241 /*
242 * Certain Athlons might work (for various values of 'work') in SMP
243 * but they are not certified as MP capable.
244 */
245 /* Athlon 660/661 is valid. */
246 if ((c->x86_model == 6) && ((c->x86_stepping == 0) ||
247 (c->x86_stepping == 1)))
248 return;
249
250 /* Duron 670 is valid */
251 if ((c->x86_model == 7) && (c->x86_stepping == 0))
252 return;
253
254 /*
255 * Athlon 662, Duron 671, and Athlon >model 7 have capability
256 * bit. It's worth noting that the A5 stepping (662) of some
257 * Athlon XP's have the MP bit set.
258 * See http://www.heise.de/newsticker/data/jow-18.10.01-000 for
259 * more.
260 */
261 if (((c->x86_model == 6) && (c->x86_stepping >= 2)) ||
262 ((c->x86_model == 7) && (c->x86_stepping >= 1)) ||
263 (c->x86_model > 7))
264 if (cpu_has(c, X86_FEATURE_MP))
265 return;
266
267 /* If we get here, not a certified SMP capable AMD system. */
268
269 /*
270 * Don't taint if we are running SMP kernel on a single non-MP
271 * approved Athlon
272 */
273 WARN_ONCE(1, "WARNING: This combination of AMD"
274 " processors is not suitable for SMP.\n");
275 add_taint(TAINT_CPU_OUT_OF_SPEC, LOCKDEP_NOW_UNRELIABLE);
276 #endif
277 }
278
279 #ifdef CONFIG_NUMA
280 /*
281 * To workaround broken NUMA config. Read the comment in
282 * srat_detect_node().
283 */
nearby_node(int apicid)284 static int nearby_node(int apicid)
285 {
286 int i, node;
287
288 for (i = apicid - 1; i >= 0; i--) {
289 node = __apicid_to_node[i];
290 if (node != NUMA_NO_NODE && node_online(node))
291 return node;
292 }
293 for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) {
294 node = __apicid_to_node[i];
295 if (node != NUMA_NO_NODE && node_online(node))
296 return node;
297 }
298 return first_node(node_online_map); /* Shouldn't happen */
299 }
300 #endif
301
srat_detect_node(struct cpuinfo_x86 * c)302 static void srat_detect_node(struct cpuinfo_x86 *c)
303 {
304 #ifdef CONFIG_NUMA
305 int cpu = smp_processor_id();
306 int node;
307 unsigned apicid = c->topo.apicid;
308
309 node = numa_cpu_node(cpu);
310 if (node == NUMA_NO_NODE)
311 node = per_cpu_llc_id(cpu);
312
313 /*
314 * On multi-fabric platform (e.g. Numascale NumaChip) a
315 * platform-specific handler needs to be called to fixup some
316 * IDs of the CPU.
317 */
318 if (x86_cpuinit.fixup_cpu_id)
319 x86_cpuinit.fixup_cpu_id(c, node);
320
321 if (!node_online(node)) {
322 /*
323 * Two possibilities here:
324 *
325 * - The CPU is missing memory and no node was created. In
326 * that case try picking one from a nearby CPU.
327 *
328 * - The APIC IDs differ from the HyperTransport node IDs
329 * which the K8 northbridge parsing fills in. Assume
330 * they are all increased by a constant offset, but in
331 * the same order as the HT nodeids. If that doesn't
332 * result in a usable node fall back to the path for the
333 * previous case.
334 *
335 * This workaround operates directly on the mapping between
336 * APIC ID and NUMA node, assuming certain relationship
337 * between APIC ID, HT node ID and NUMA topology. As going
338 * through CPU mapping may alter the outcome, directly
339 * access __apicid_to_node[].
340 */
341 int ht_nodeid = c->topo.initial_apicid;
342
343 if (__apicid_to_node[ht_nodeid] != NUMA_NO_NODE)
344 node = __apicid_to_node[ht_nodeid];
345 /* Pick a nearby node */
346 if (!node_online(node))
347 node = nearby_node(apicid);
348 }
349 numa_set_node(cpu, node);
350 #endif
351 }
352
bsp_determine_snp(struct cpuinfo_x86 * c)353 static void bsp_determine_snp(struct cpuinfo_x86 *c)
354 {
355 #ifdef CONFIG_ARCH_HAS_CC_PLATFORM
356 cc_vendor = CC_VENDOR_AMD;
357
358 if (cpu_has(c, X86_FEATURE_SEV_SNP)) {
359 /*
360 * RMP table entry format is not architectural and is defined by the
361 * per-processor PPR. Restrict SNP support on the known CPU models
362 * for which the RMP table entry format is currently defined or for
363 * processors which support the architecturally defined RMPREAD
364 * instruction.
365 */
366 if (!cpu_has(c, X86_FEATURE_HYPERVISOR) &&
367 (cpu_feature_enabled(X86_FEATURE_ZEN3) ||
368 cpu_feature_enabled(X86_FEATURE_ZEN4) ||
369 cpu_feature_enabled(X86_FEATURE_RMPREAD)) &&
370 snp_probe_rmptable_info()) {
371 cc_platform_set(CC_ATTR_HOST_SEV_SNP);
372 } else {
373 setup_clear_cpu_cap(X86_FEATURE_SEV_SNP);
374 cc_platform_clear(CC_ATTR_HOST_SEV_SNP);
375 }
376 }
377 #endif
378 }
379
380 #define ZEN_MODEL_STEP_UCODE(fam, model, step, ucode) \
381 X86_MATCH_VFM_STEPS(VFM_MAKE(X86_VENDOR_AMD, fam, model), \
382 step, step, ucode)
383
384 static const struct x86_cpu_id amd_tsa_microcode[] = {
385 ZEN_MODEL_STEP_UCODE(0x19, 0x01, 0x1, 0x0a0011d7),
386 ZEN_MODEL_STEP_UCODE(0x19, 0x01, 0x2, 0x0a00123b),
387 ZEN_MODEL_STEP_UCODE(0x19, 0x08, 0x2, 0x0a00820d),
388 ZEN_MODEL_STEP_UCODE(0x19, 0x11, 0x1, 0x0a10114c),
389 ZEN_MODEL_STEP_UCODE(0x19, 0x11, 0x2, 0x0a10124c),
390 ZEN_MODEL_STEP_UCODE(0x19, 0x18, 0x1, 0x0a108109),
391 ZEN_MODEL_STEP_UCODE(0x19, 0x21, 0x0, 0x0a20102e),
392 ZEN_MODEL_STEP_UCODE(0x19, 0x21, 0x2, 0x0a201211),
393 ZEN_MODEL_STEP_UCODE(0x19, 0x44, 0x1, 0x0a404108),
394 ZEN_MODEL_STEP_UCODE(0x19, 0x50, 0x0, 0x0a500012),
395 ZEN_MODEL_STEP_UCODE(0x19, 0x61, 0x2, 0x0a60120a),
396 ZEN_MODEL_STEP_UCODE(0x19, 0x74, 0x1, 0x0a704108),
397 ZEN_MODEL_STEP_UCODE(0x19, 0x75, 0x2, 0x0a705208),
398 ZEN_MODEL_STEP_UCODE(0x19, 0x78, 0x0, 0x0a708008),
399 ZEN_MODEL_STEP_UCODE(0x19, 0x7c, 0x0, 0x0a70c008),
400 ZEN_MODEL_STEP_UCODE(0x19, 0xa0, 0x2, 0x0aa00216),
401 {},
402 };
403
tsa_init(struct cpuinfo_x86 * c)404 static void tsa_init(struct cpuinfo_x86 *c)
405 {
406 if (cpu_has(c, X86_FEATURE_HYPERVISOR))
407 return;
408
409 if (cpu_has(c, X86_FEATURE_ZEN3) ||
410 cpu_has(c, X86_FEATURE_ZEN4)) {
411 if (x86_match_min_microcode_rev(amd_tsa_microcode))
412 setup_force_cpu_cap(X86_FEATURE_VERW_CLEAR);
413 else
414 pr_debug("%s: current revision: 0x%x\n", __func__, c->microcode);
415 } else {
416 setup_force_cpu_cap(X86_FEATURE_TSA_SQ_NO);
417 setup_force_cpu_cap(X86_FEATURE_TSA_L1_NO);
418 }
419 }
420
bsp_init_amd(struct cpuinfo_x86 * c)421 static void bsp_init_amd(struct cpuinfo_x86 *c)
422 {
423 if (cpu_has(c, X86_FEATURE_CONSTANT_TSC)) {
424
425 if (c->x86 > 0x10 ||
426 (c->x86 == 0x10 && c->x86_model >= 0x2)) {
427 u64 val;
428
429 rdmsrq(MSR_K7_HWCR, val);
430 if (!(val & BIT(24)))
431 pr_warn(FW_BUG "TSC doesn't count with P0 frequency!\n");
432 }
433 }
434
435 if (c->x86 == 0x15) {
436 unsigned long upperbit;
437 u32 cpuid, assoc;
438
439 cpuid = cpuid_edx(0x80000005);
440 assoc = cpuid >> 16 & 0xff;
441 upperbit = ((cpuid >> 24) << 10) / assoc;
442
443 va_align.mask = (upperbit - 1) & PAGE_MASK;
444 va_align.flags = ALIGN_VA_32 | ALIGN_VA_64;
445
446 /* A random value per boot for bit slice [12:upper_bit) */
447 va_align.bits = get_random_u32() & va_align.mask;
448 }
449
450 if (cpu_has(c, X86_FEATURE_MWAITX))
451 use_mwaitx_delay();
452
453 if (!boot_cpu_has(X86_FEATURE_AMD_SSBD) &&
454 !boot_cpu_has(X86_FEATURE_VIRT_SSBD) &&
455 c->x86 >= 0x15 && c->x86 <= 0x17) {
456 unsigned int bit;
457
458 switch (c->x86) {
459 case 0x15: bit = 54; break;
460 case 0x16: bit = 33; break;
461 case 0x17: bit = 10; break;
462 default: return;
463 }
464 /*
465 * Try to cache the base value so further operations can
466 * avoid RMW. If that faults, do not enable SSBD.
467 */
468 if (!rdmsrq_safe(MSR_AMD64_LS_CFG, &x86_amd_ls_cfg_base)) {
469 setup_force_cpu_cap(X86_FEATURE_LS_CFG_SSBD);
470 setup_force_cpu_cap(X86_FEATURE_SSBD);
471 x86_amd_ls_cfg_ssbd_mask = 1ULL << bit;
472 }
473 }
474
475 resctrl_cpu_detect(c);
476
477 /* Figure out Zen generations: */
478 switch (c->x86) {
479 case 0x17:
480 switch (c->x86_model) {
481 case 0x00 ... 0x2f:
482 case 0x50 ... 0x5f:
483 setup_force_cpu_cap(X86_FEATURE_ZEN1);
484 break;
485 case 0x30 ... 0x4f:
486 case 0x60 ... 0x7f:
487 case 0x90 ... 0x91:
488 case 0xa0 ... 0xaf:
489 setup_force_cpu_cap(X86_FEATURE_ZEN2);
490 break;
491 default:
492 goto warn;
493 }
494 break;
495
496 case 0x19:
497 switch (c->x86_model) {
498 case 0x00 ... 0x0f:
499 case 0x20 ... 0x5f:
500 setup_force_cpu_cap(X86_FEATURE_ZEN3);
501 break;
502 case 0x10 ... 0x1f:
503 case 0x60 ... 0xaf:
504 setup_force_cpu_cap(X86_FEATURE_ZEN4);
505 break;
506 default:
507 goto warn;
508 }
509 break;
510
511 case 0x1a:
512 switch (c->x86_model) {
513 case 0x00 ... 0x2f:
514 case 0x40 ... 0x4f:
515 case 0x60 ... 0x7f:
516 setup_force_cpu_cap(X86_FEATURE_ZEN5);
517 break;
518 case 0x50 ... 0x5f:
519 case 0x80 ... 0xaf:
520 case 0xc0 ... 0xcf:
521 setup_force_cpu_cap(X86_FEATURE_ZEN6);
522 break;
523 default:
524 goto warn;
525 }
526 break;
527
528 default:
529 break;
530 }
531
532 bsp_determine_snp(c);
533 tsa_init(c);
534
535 if (cpu_has(c, X86_FEATURE_GP_ON_USER_CPUID))
536 setup_force_cpu_cap(X86_FEATURE_CPUID_FAULT);
537
538 return;
539
540 warn:
541 WARN_ONCE(1, "Family 0x%x, model: 0x%x??\n", c->x86, c->x86_model);
542 }
543
early_detect_mem_encrypt(struct cpuinfo_x86 * c)544 static void early_detect_mem_encrypt(struct cpuinfo_x86 *c)
545 {
546 u64 msr;
547
548 /*
549 * Mark using WBINVD is needed during kexec on processors that
550 * support SME. This provides support for performing a successful
551 * kexec when going from SME inactive to SME active (or vice-versa).
552 *
553 * The cache must be cleared so that if there are entries with the
554 * same physical address, both with and without the encryption bit,
555 * they don't race each other when flushed and potentially end up
556 * with the wrong entry being committed to memory.
557 *
558 * Test the CPUID bit directly because with mem_encrypt=off the
559 * BSP will clear the X86_FEATURE_SME bit and the APs will not
560 * see it set after that.
561 */
562 if (c->extended_cpuid_level >= 0x8000001f && (cpuid_eax(0x8000001f) & BIT(0)))
563 __this_cpu_write(cache_state_incoherent, true);
564
565 /*
566 * BIOS support is required for SME and SEV.
567 * For SME: If BIOS has enabled SME then adjust x86_phys_bits by
568 * the SME physical address space reduction value.
569 * If BIOS has not enabled SME then don't advertise the
570 * SME feature (set in scattered.c).
571 * If the kernel has not enabled SME via any means then
572 * don't advertise the SME feature.
573 * For SEV: If BIOS has not enabled SEV then don't advertise SEV and
574 * any additional functionality based on it.
575 *
576 * In all cases, since support for SME and SEV requires long mode,
577 * don't advertise the feature under CONFIG_X86_32.
578 */
579 if (cpu_has(c, X86_FEATURE_SME) || cpu_has(c, X86_FEATURE_SEV)) {
580 /* Check if memory encryption is enabled */
581 rdmsrq(MSR_AMD64_SYSCFG, msr);
582 if (!(msr & MSR_AMD64_SYSCFG_MEM_ENCRYPT))
583 goto clear_all;
584
585 /*
586 * Always adjust physical address bits. Even though this
587 * will be a value above 32-bits this is still done for
588 * CONFIG_X86_32 so that accurate values are reported.
589 */
590 c->x86_phys_bits -= (cpuid_ebx(0x8000001f) >> 6) & 0x3f;
591
592 if (IS_ENABLED(CONFIG_X86_32))
593 goto clear_all;
594
595 if (!sme_me_mask)
596 setup_clear_cpu_cap(X86_FEATURE_SME);
597
598 rdmsrq(MSR_K7_HWCR, msr);
599 if (!(msr & MSR_K7_HWCR_SMMLOCK))
600 goto clear_sev;
601
602 return;
603
604 clear_all:
605 setup_clear_cpu_cap(X86_FEATURE_SME);
606 clear_sev:
607 setup_clear_cpu_cap(X86_FEATURE_SEV);
608 setup_clear_cpu_cap(X86_FEATURE_SEV_ES);
609 setup_clear_cpu_cap(X86_FEATURE_SEV_SNP);
610 }
611 }
612
early_init_amd(struct cpuinfo_x86 * c)613 static void early_init_amd(struct cpuinfo_x86 *c)
614 {
615 u32 dummy;
616
617 if (c->x86 >= 0xf)
618 set_cpu_cap(c, X86_FEATURE_K8);
619
620 rdmsr_safe(MSR_AMD64_PATCH_LEVEL, &c->microcode, &dummy);
621
622 /*
623 * c->x86_power is 8000_0007 edx. Bit 8 is TSC runs at constant rate
624 * with P/T states and does not stop in deep C-states
625 */
626 if (c->x86_power & (1 << 8)) {
627 set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
628 set_cpu_cap(c, X86_FEATURE_NONSTOP_TSC);
629 }
630
631 /* Bit 12 of 8000_0007 edx is accumulated power mechanism. */
632 if (c->x86_power & BIT(12))
633 set_cpu_cap(c, X86_FEATURE_ACC_POWER);
634
635 /* Bit 14 indicates the Runtime Average Power Limit interface. */
636 if (c->x86_power & BIT(14))
637 set_cpu_cap(c, X86_FEATURE_RAPL);
638
639 #ifdef CONFIG_X86_64
640 set_cpu_cap(c, X86_FEATURE_SYSCALL32);
641 #else
642 /* Set MTRR capability flag if appropriate */
643 if (c->x86 == 5)
644 if (c->x86_model == 13 || c->x86_model == 9 ||
645 (c->x86_model == 8 && c->x86_stepping >= 8))
646 set_cpu_cap(c, X86_FEATURE_K6_MTRR);
647 #endif
648 #if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_PCI)
649 /*
650 * ApicID can always be treated as an 8-bit value for AMD APIC versions
651 * >= 0x10, but even old K8s came out of reset with version 0x10. So, we
652 * can safely set X86_FEATURE_EXTD_APICID unconditionally for families
653 * after 16h.
654 */
655 if (boot_cpu_has(X86_FEATURE_APIC)) {
656 if (c->x86 > 0x16)
657 set_cpu_cap(c, X86_FEATURE_EXTD_APICID);
658 else if (c->x86 >= 0xf) {
659 /* check CPU config space for extended APIC ID */
660 unsigned int val;
661
662 val = read_pci_config(0, 24, 0, 0x68);
663 if ((val >> 17 & 0x3) == 0x3)
664 set_cpu_cap(c, X86_FEATURE_EXTD_APICID);
665 }
666 }
667 #endif
668
669 /*
670 * This is only needed to tell the kernel whether to use VMCALL
671 * and VMMCALL. VMMCALL is never executed except under virt, so
672 * we can set it unconditionally.
673 */
674 set_cpu_cap(c, X86_FEATURE_VMMCALL);
675
676 /* F16h erratum 793, CVE-2013-6885 */
677 if (c->x86 == 0x16 && c->x86_model <= 0xf)
678 msr_set_bit(MSR_AMD64_LS_CFG, 15);
679
680 early_detect_mem_encrypt(c);
681
682 if (!cpu_has(c, X86_FEATURE_HYPERVISOR) && !cpu_has(c, X86_FEATURE_IBPB_BRTYPE)) {
683 if (c->x86 == 0x17 && boot_cpu_has(X86_FEATURE_AMD_IBPB))
684 setup_force_cpu_cap(X86_FEATURE_IBPB_BRTYPE);
685 else if (c->x86 >= 0x19 && !wrmsrq_safe(MSR_IA32_PRED_CMD, PRED_CMD_SBPB)) {
686 setup_force_cpu_cap(X86_FEATURE_IBPB_BRTYPE);
687 setup_force_cpu_cap(X86_FEATURE_SBPB);
688 }
689 }
690 }
691
init_amd_k8(struct cpuinfo_x86 * c)692 static void init_amd_k8(struct cpuinfo_x86 *c)
693 {
694 u32 level;
695 u64 value;
696
697 /* On C+ stepping K8 rep microcode works well for copy/memset */
698 level = cpuid_eax(1);
699 if ((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58)
700 set_cpu_cap(c, X86_FEATURE_REP_GOOD);
701
702 /*
703 * Some BIOSes incorrectly force this feature, but only K8 revision D
704 * (model = 0x14) and later actually support it.
705 * (AMD Erratum #110, docId: 25759).
706 */
707 if (c->x86_model < 0x14 && cpu_has(c, X86_FEATURE_LAHF_LM) && !cpu_has(c, X86_FEATURE_HYPERVISOR)) {
708 clear_cpu_cap(c, X86_FEATURE_LAHF_LM);
709 if (!rdmsrq_amd_safe(0xc001100d, &value)) {
710 value &= ~BIT_64(32);
711 wrmsrq_amd_safe(0xc001100d, value);
712 }
713 }
714
715 if (!c->x86_model_id[0])
716 strscpy(c->x86_model_id, "Hammer");
717
718 #ifdef CONFIG_SMP
719 /*
720 * Disable TLB flush filter by setting HWCR.FFDIS on K8
721 * bit 6 of msr C001_0015
722 *
723 * Errata 63 for SH-B3 steppings
724 * Errata 122 for all steppings (F+ have it disabled by default)
725 */
726 msr_set_bit(MSR_K7_HWCR, 6);
727 #endif
728 set_cpu_bug(c, X86_BUG_SWAPGS_FENCE);
729
730 /*
731 * Check models and steppings affected by erratum 400. This is
732 * used to select the proper idle routine and to enable the
733 * check whether the machine is affected in arch_post_acpi_subsys_init()
734 * which sets the X86_BUG_AMD_APIC_C1E bug depending on the MSR check.
735 */
736 if (c->x86_model > 0x41 ||
737 (c->x86_model == 0x41 && c->x86_stepping >= 0x2))
738 setup_force_cpu_bug(X86_BUG_AMD_E400);
739 }
740
init_amd_gh(struct cpuinfo_x86 * c)741 static void init_amd_gh(struct cpuinfo_x86 *c)
742 {
743 #ifdef CONFIG_MMCONF_FAM10H
744 /* do this for boot cpu */
745 if (c == &boot_cpu_data)
746 check_enable_amd_mmconf_dmi();
747
748 fam10h_check_enable_mmcfg();
749 #endif
750
751 /*
752 * Disable GART TLB Walk Errors on Fam10h. We do this here because this
753 * is always needed when GART is enabled, even in a kernel which has no
754 * MCE support built in. BIOS should disable GartTlbWlk Errors already.
755 * If it doesn't, we do it here as suggested by the BKDG.
756 *
757 * Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=33012
758 */
759 msr_set_bit(MSR_AMD64_MCx_MASK(4), 10);
760
761 /*
762 * On family 10h BIOS may not have properly enabled WC+ support, causing
763 * it to be converted to CD memtype. This may result in performance
764 * degradation for certain nested-paging guests. Prevent this conversion
765 * by clearing bit 24 in MSR_AMD64_BU_CFG2.
766 *
767 * NOTE: we want to use the _safe accessors so as not to #GP kvm
768 * guests on older kvm hosts.
769 */
770 msr_clear_bit(MSR_AMD64_BU_CFG2, 24);
771
772 set_cpu_bug(c, X86_BUG_AMD_TLB_MMATCH);
773
774 /*
775 * Check models and steppings affected by erratum 400. This is
776 * used to select the proper idle routine and to enable the
777 * check whether the machine is affected in arch_post_acpi_subsys_init()
778 * which sets the X86_BUG_AMD_APIC_C1E bug depending on the MSR check.
779 */
780 if (c->x86_model > 0x2 ||
781 (c->x86_model == 0x2 && c->x86_stepping >= 0x1))
782 setup_force_cpu_bug(X86_BUG_AMD_E400);
783 }
784
init_amd_ln(struct cpuinfo_x86 * c)785 static void init_amd_ln(struct cpuinfo_x86 *c)
786 {
787 /*
788 * Apply erratum 665 fix unconditionally so machines without a BIOS
789 * fix work.
790 */
791 msr_set_bit(MSR_AMD64_DE_CFG, 31);
792 }
793
794 static bool rdrand_force;
795
rdrand_cmdline(char * str)796 static int __init rdrand_cmdline(char *str)
797 {
798 if (!str)
799 return -EINVAL;
800
801 if (!strcmp(str, "force"))
802 rdrand_force = true;
803 else
804 return -EINVAL;
805
806 return 0;
807 }
808 early_param("rdrand", rdrand_cmdline);
809
clear_rdrand_cpuid_bit(struct cpuinfo_x86 * c)810 static void clear_rdrand_cpuid_bit(struct cpuinfo_x86 *c)
811 {
812 /*
813 * Saving of the MSR used to hide the RDRAND support during
814 * suspend/resume is done by arch/x86/power/cpu.c, which is
815 * dependent on CONFIG_PM_SLEEP.
816 */
817 if (!IS_ENABLED(CONFIG_PM_SLEEP))
818 return;
819
820 /*
821 * The self-test can clear X86_FEATURE_RDRAND, so check for
822 * RDRAND support using the CPUID function directly.
823 */
824 if (!(cpuid_ecx(1) & BIT(30)) || rdrand_force)
825 return;
826
827 msr_clear_bit(MSR_AMD64_CPUID_FN_1, 62);
828
829 /*
830 * Verify that the CPUID change has occurred in case the kernel is
831 * running virtualized and the hypervisor doesn't support the MSR.
832 */
833 if (cpuid_ecx(1) & BIT(30)) {
834 pr_info_once("BIOS may not properly restore RDRAND after suspend, but hypervisor does not support hiding RDRAND via CPUID.\n");
835 return;
836 }
837
838 clear_cpu_cap(c, X86_FEATURE_RDRAND);
839 pr_info_once("BIOS may not properly restore RDRAND after suspend, hiding RDRAND via CPUID. Use rdrand=force to reenable.\n");
840 }
841
init_amd_jg(struct cpuinfo_x86 * c)842 static void init_amd_jg(struct cpuinfo_x86 *c)
843 {
844 /*
845 * Some BIOS implementations do not restore proper RDRAND support
846 * across suspend and resume. Check on whether to hide the RDRAND
847 * instruction support via CPUID.
848 */
849 clear_rdrand_cpuid_bit(c);
850 }
851
init_amd_bd(struct cpuinfo_x86 * c)852 static void init_amd_bd(struct cpuinfo_x86 *c)
853 {
854 u64 value;
855
856 /*
857 * The way access filter has a performance penalty on some workloads.
858 * Disable it on the affected CPUs.
859 */
860 if ((c->x86_model >= 0x02) && (c->x86_model < 0x20)) {
861 if (!rdmsrq_safe(MSR_F15H_IC_CFG, &value) && !(value & 0x1E)) {
862 value |= 0x1E;
863 wrmsrq_safe(MSR_F15H_IC_CFG, value);
864 }
865 }
866
867 /*
868 * Some BIOS implementations do not restore proper RDRAND support
869 * across suspend and resume. Check on whether to hide the RDRAND
870 * instruction support via CPUID.
871 */
872 clear_rdrand_cpuid_bit(c);
873 }
874
875 static const struct x86_cpu_id erratum_1386_microcode[] = {
876 ZEN_MODEL_STEP_UCODE(0x17, 0x01, 0x2, 0x0800126e),
877 ZEN_MODEL_STEP_UCODE(0x17, 0x31, 0x0, 0x08301052),
878 {}
879 };
880
fix_erratum_1386(struct cpuinfo_x86 * c)881 static void fix_erratum_1386(struct cpuinfo_x86 *c)
882 {
883 /*
884 * Work around Erratum 1386. The XSAVES instruction malfunctions in
885 * certain circumstances on Zen1/2 uarch, and not all parts have had
886 * updated microcode at the time of writing (March 2023).
887 *
888 * Affected parts all have no supervisor XSAVE states, meaning that
889 * the XSAVEC instruction (which works fine) is equivalent.
890 *
891 * Clear the feature flag only on microcode revisions which
892 * don't have the fix.
893 */
894 if (x86_match_min_microcode_rev(erratum_1386_microcode))
895 return;
896
897 clear_cpu_cap(c, X86_FEATURE_XSAVES);
898 }
899
init_spectral_chicken(struct cpuinfo_x86 * c)900 void init_spectral_chicken(struct cpuinfo_x86 *c)
901 {
902 #ifdef CONFIG_MITIGATION_UNRET_ENTRY
903 /*
904 * On Zen2 we offer this chicken (bit) on the altar of Speculation.
905 *
906 * This suppresses speculation from the middle of a basic block, i.e. it
907 * suppresses non-branch predictions.
908 */
909 if (!cpu_has(c, X86_FEATURE_HYPERVISOR))
910 msr_set_bit(MSR_ZEN2_SPECTRAL_CHICKEN, MSR_ZEN2_SPECTRAL_CHICKEN_BIT);
911 #endif
912 }
913
init_amd_zen_common(void)914 static void init_amd_zen_common(void)
915 {
916 setup_force_cpu_cap(X86_FEATURE_ZEN);
917 #ifdef CONFIG_NUMA
918 node_reclaim_distance = 32;
919 #endif
920 }
921
init_amd_zen1(struct cpuinfo_x86 * c)922 static void init_amd_zen1(struct cpuinfo_x86 *c)
923 {
924 fix_erratum_1386(c);
925
926 /* Fix up CPUID bits, but only if not virtualised. */
927 if (!cpu_has(c, X86_FEATURE_HYPERVISOR)) {
928
929 /* Erratum 1076: CPB feature bit not being set in CPUID. */
930 if (!cpu_has(c, X86_FEATURE_CPB))
931 set_cpu_cap(c, X86_FEATURE_CPB);
932 }
933
934 pr_notice_once("AMD Zen1 DIV0 bug detected. Disable SMT for full protection.\n");
935 setup_force_cpu_bug(X86_BUG_DIV0);
936
937 /*
938 * Turn off the Instructions Retired free counter on machines that are
939 * susceptible to erratum #1054 "Instructions Retired Performance
940 * Counter May Be Inaccurate".
941 */
942 if (c->x86_model < 0x30) {
943 msr_clear_bit(MSR_K7_HWCR, MSR_K7_HWCR_IRPERF_EN_BIT);
944 clear_cpu_cap(c, X86_FEATURE_IRPERF);
945 }
946 }
947
948 static const struct x86_cpu_id amd_zenbleed_microcode[] = {
949 ZEN_MODEL_STEP_UCODE(0x17, 0x31, 0x0, 0x0830107b),
950 ZEN_MODEL_STEP_UCODE(0x17, 0x60, 0x1, 0x0860010c),
951 ZEN_MODEL_STEP_UCODE(0x17, 0x68, 0x1, 0x08608107),
952 ZEN_MODEL_STEP_UCODE(0x17, 0x71, 0x0, 0x08701033),
953 ZEN_MODEL_STEP_UCODE(0x17, 0xa0, 0x0, 0x08a00009),
954 {}
955 };
956
zen2_zenbleed_check(struct cpuinfo_x86 * c)957 static void zen2_zenbleed_check(struct cpuinfo_x86 *c)
958 {
959 if (cpu_has(c, X86_FEATURE_HYPERVISOR))
960 return;
961
962 if (!cpu_has(c, X86_FEATURE_AVX))
963 return;
964
965 if (!x86_match_min_microcode_rev(amd_zenbleed_microcode)) {
966 pr_notice_once("Zenbleed: please update your microcode for the most optimal fix\n");
967 msr_set_bit(MSR_AMD64_DE_CFG, MSR_AMD64_DE_CFG_ZEN2_FP_BACKUP_FIX_BIT);
968 } else {
969 msr_clear_bit(MSR_AMD64_DE_CFG, MSR_AMD64_DE_CFG_ZEN2_FP_BACKUP_FIX_BIT);
970 }
971 }
972
init_amd_zen2(struct cpuinfo_x86 * c)973 static void init_amd_zen2(struct cpuinfo_x86 *c)
974 {
975 init_spectral_chicken(c);
976 fix_erratum_1386(c);
977 zen2_zenbleed_check(c);
978
979 /* Disable RDSEED on AMD Cyan Skillfish because of an error. */
980 if (c->x86_model == 0x47 && c->x86_stepping == 0x0) {
981 clear_cpu_cap(c, X86_FEATURE_RDSEED);
982 msr_clear_bit(MSR_AMD64_CPUID_FN_7, 18);
983 pr_emerg("RDSEED is not reliable on this platform; disabling.\n");
984 }
985
986 /* Correct misconfigured CPUID on some clients. */
987 clear_cpu_cap(c, X86_FEATURE_INVLPGB);
988 }
989
init_amd_zen3(struct cpuinfo_x86 * c)990 static void init_amd_zen3(struct cpuinfo_x86 *c)
991 {
992 if (!cpu_has(c, X86_FEATURE_HYPERVISOR)) {
993 /*
994 * Zen3 (Fam19 model < 0x10) parts are not susceptible to
995 * Branch Type Confusion, but predate the allocation of the
996 * BTC_NO bit.
997 */
998 if (!cpu_has(c, X86_FEATURE_BTC_NO))
999 set_cpu_cap(c, X86_FEATURE_BTC_NO);
1000 }
1001 }
1002
init_amd_zen4(struct cpuinfo_x86 * c)1003 static void init_amd_zen4(struct cpuinfo_x86 *c)
1004 {
1005 if (!cpu_has(c, X86_FEATURE_HYPERVISOR))
1006 msr_set_bit(MSR_ZEN4_BP_CFG, MSR_ZEN4_BP_CFG_SHARED_BTB_FIX_BIT);
1007
1008 /*
1009 * These Zen4 SoCs advertise support for virtualized VMLOAD/VMSAVE
1010 * in some BIOS versions but they can lead to random host reboots.
1011 */
1012 switch (c->x86_model) {
1013 case 0x18 ... 0x1f:
1014 case 0x60 ... 0x7f:
1015 clear_cpu_cap(c, X86_FEATURE_V_VMSAVE_VMLOAD);
1016 break;
1017 }
1018 }
1019
1020 static const struct x86_cpu_id zen5_rdseed_microcode[] = {
1021 ZEN_MODEL_STEP_UCODE(0x1a, 0x02, 0x1, 0x0b00215a),
1022 ZEN_MODEL_STEP_UCODE(0x1a, 0x08, 0x1, 0x0b008121),
1023 ZEN_MODEL_STEP_UCODE(0x1a, 0x11, 0x0, 0x0b101054),
1024 ZEN_MODEL_STEP_UCODE(0x1a, 0x24, 0x0, 0x0b204037),
1025 ZEN_MODEL_STEP_UCODE(0x1a, 0x44, 0x0, 0x0b404035),
1026 ZEN_MODEL_STEP_UCODE(0x1a, 0x44, 0x1, 0x0b404108),
1027 ZEN_MODEL_STEP_UCODE(0x1a, 0x60, 0x0, 0x0b600037),
1028 ZEN_MODEL_STEP_UCODE(0x1a, 0x68, 0x0, 0x0b608038),
1029 ZEN_MODEL_STEP_UCODE(0x1a, 0x70, 0x0, 0x0b700037),
1030 {},
1031 };
1032
init_amd_zen5(struct cpuinfo_x86 * c)1033 static void init_amd_zen5(struct cpuinfo_x86 *c)
1034 {
1035 if (!x86_match_min_microcode_rev(zen5_rdseed_microcode)) {
1036 clear_cpu_cap(c, X86_FEATURE_RDSEED);
1037 msr_clear_bit(MSR_AMD64_CPUID_FN_7, 18);
1038 pr_emerg_once("RDSEED32 is broken. Disabling the corresponding CPUID bit.\n");
1039 }
1040 }
1041
init_amd(struct cpuinfo_x86 * c)1042 static void init_amd(struct cpuinfo_x86 *c)
1043 {
1044 u64 vm_cr;
1045
1046 early_init_amd(c);
1047
1048 if (c->x86 >= 0x10)
1049 set_cpu_cap(c, X86_FEATURE_REP_GOOD);
1050
1051 /* AMD FSRM also implies FSRS */
1052 if (cpu_has(c, X86_FEATURE_FSRM))
1053 set_cpu_cap(c, X86_FEATURE_FSRS);
1054
1055 /* K6s reports MCEs but don't actually have all the MSRs */
1056 if (c->x86 < 6)
1057 clear_cpu_cap(c, X86_FEATURE_MCE);
1058
1059 switch (c->x86) {
1060 case 4: init_amd_k5(c); break;
1061 case 5: init_amd_k6(c); break;
1062 case 6: init_amd_k7(c); break;
1063 case 0xf: init_amd_k8(c); break;
1064 case 0x10: init_amd_gh(c); break;
1065 case 0x12: init_amd_ln(c); break;
1066 case 0x15: init_amd_bd(c); break;
1067 case 0x16: init_amd_jg(c); break;
1068 }
1069
1070 /*
1071 * Save up on some future enablement work and do common Zen
1072 * settings.
1073 */
1074 if (c->x86 >= 0x17)
1075 init_amd_zen_common();
1076
1077 if (boot_cpu_has(X86_FEATURE_ZEN1))
1078 init_amd_zen1(c);
1079 else if (boot_cpu_has(X86_FEATURE_ZEN2))
1080 init_amd_zen2(c);
1081 else if (boot_cpu_has(X86_FEATURE_ZEN3))
1082 init_amd_zen3(c);
1083 else if (boot_cpu_has(X86_FEATURE_ZEN4))
1084 init_amd_zen4(c);
1085 else if (boot_cpu_has(X86_FEATURE_ZEN5))
1086 init_amd_zen5(c);
1087
1088 /*
1089 * Enable workaround for FXSAVE leak on CPUs
1090 * without a XSaveErPtr feature
1091 */
1092 if ((c->x86 >= 6) && (!cpu_has(c, X86_FEATURE_XSAVEERPTR)))
1093 set_cpu_bug(c, X86_BUG_FXSAVE_LEAK);
1094
1095 cpu_detect_cache_sizes(c);
1096
1097 srat_detect_node(c);
1098
1099 init_amd_cacheinfo(c);
1100
1101 if (cpu_has(c, X86_FEATURE_SVM)) {
1102 rdmsrq(MSR_VM_CR, vm_cr);
1103 if (vm_cr & SVM_VM_CR_SVM_DIS_MASK) {
1104 pr_notice_once("SVM disabled (by BIOS) in MSR_VM_CR\n");
1105 clear_cpu_cap(c, X86_FEATURE_SVM);
1106 }
1107 }
1108
1109 if (!cpu_has(c, X86_FEATURE_LFENCE_RDTSC) && cpu_has(c, X86_FEATURE_XMM2)) {
1110 /*
1111 * Use LFENCE for execution serialization. On families which
1112 * don't have that MSR, LFENCE is already serializing.
1113 * msr_set_bit() uses the safe accessors, too, even if the MSR
1114 * is not present.
1115 */
1116 msr_set_bit(MSR_AMD64_DE_CFG,
1117 MSR_AMD64_DE_CFG_LFENCE_SERIALIZE_BIT);
1118
1119 /* A serializing LFENCE stops RDTSC speculation */
1120 set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
1121 }
1122
1123 /*
1124 * Family 0x12 and above processors have APIC timer
1125 * running in deep C states.
1126 */
1127 if (c->x86 > 0x11)
1128 set_cpu_cap(c, X86_FEATURE_ARAT);
1129
1130 /* 3DNow or LM implies PREFETCHW */
1131 if (!cpu_has(c, X86_FEATURE_3DNOWPREFETCH))
1132 if (cpu_has(c, X86_FEATURE_3DNOW) || cpu_has(c, X86_FEATURE_LM))
1133 set_cpu_cap(c, X86_FEATURE_3DNOWPREFETCH);
1134
1135 /* AMD CPUs don't reset SS attributes on SYSRET, Xen does. */
1136 if (!cpu_feature_enabled(X86_FEATURE_XENPV))
1137 set_cpu_bug(c, X86_BUG_SYSRET_SS_ATTRS);
1138
1139 /* Enable the Instructions Retired free counter */
1140 if (cpu_has(c, X86_FEATURE_IRPERF))
1141 msr_set_bit(MSR_K7_HWCR, MSR_K7_HWCR_IRPERF_EN_BIT);
1142
1143 check_null_seg_clears_base(c);
1144
1145 /*
1146 * Make sure EFER[AIBRSE - Automatic IBRS Enable] is set. The APs are brought up
1147 * using the trampoline code and as part of it, MSR_EFER gets prepared there in
1148 * order to be replicated onto them. Regardless, set it here again, if not set,
1149 * to protect against any future refactoring/code reorganization which might
1150 * miss setting this important bit.
1151 */
1152 if (spectre_v2_in_eibrs_mode(spectre_v2_enabled) &&
1153 cpu_has(c, X86_FEATURE_AUTOIBRS))
1154 WARN_ON_ONCE(msr_set_bit(MSR_EFER, _EFER_AUTOIBRS) < 0);
1155
1156 /* AMD CPUs don't need fencing after x2APIC/TSC_DEADLINE MSR writes. */
1157 clear_cpu_cap(c, X86_FEATURE_APIC_MSRS_FENCE);
1158
1159 /* Enable Translation Cache Extension */
1160 if (cpu_has(c, X86_FEATURE_TCE))
1161 msr_set_bit(MSR_EFER, _EFER_TCE);
1162 }
1163
1164 #ifdef CONFIG_X86_32
amd_size_cache(struct cpuinfo_x86 * c,unsigned int size)1165 static unsigned int amd_size_cache(struct cpuinfo_x86 *c, unsigned int size)
1166 {
1167 /* AMD errata T13 (order #21922) */
1168 if (c->x86 == 6) {
1169 /* Duron Rev A0 */
1170 if (c->x86_model == 3 && c->x86_stepping == 0)
1171 size = 64;
1172 /* Tbird rev A1/A2 */
1173 if (c->x86_model == 4 &&
1174 (c->x86_stepping == 0 || c->x86_stepping == 1))
1175 size = 256;
1176 }
1177 return size;
1178 }
1179 #endif
1180
cpu_detect_tlb_amd(struct cpuinfo_x86 * c)1181 static void cpu_detect_tlb_amd(struct cpuinfo_x86 *c)
1182 {
1183 u32 ebx, eax, ecx, edx;
1184 u16 mask = 0xfff;
1185
1186 if (c->x86 < 0xf)
1187 return;
1188
1189 if (c->extended_cpuid_level < 0x80000006)
1190 return;
1191
1192 cpuid(0x80000006, &eax, &ebx, &ecx, &edx);
1193
1194 tlb_lld_4k = (ebx >> 16) & mask;
1195 tlb_lli_4k = ebx & mask;
1196
1197 /*
1198 * K8 doesn't have 2M/4M entries in the L2 TLB so read out the L1 TLB
1199 * characteristics from the CPUID function 0x80000005 instead.
1200 */
1201 if (c->x86 == 0xf) {
1202 cpuid(0x80000005, &eax, &ebx, &ecx, &edx);
1203 mask = 0xff;
1204 }
1205
1206 /* Handle DTLB 2M and 4M sizes, fall back to L1 if L2 is disabled */
1207 if (!((eax >> 16) & mask))
1208 tlb_lld_2m = (cpuid_eax(0x80000005) >> 16) & 0xff;
1209 else
1210 tlb_lld_2m = (eax >> 16) & mask;
1211
1212 /* a 4M entry uses two 2M entries */
1213 tlb_lld_4m = tlb_lld_2m >> 1;
1214
1215 /* Handle ITLB 2M and 4M sizes, fall back to L1 if L2 is disabled */
1216 if (!(eax & mask)) {
1217 /* Erratum 658 */
1218 if (c->x86 == 0x15 && c->x86_model <= 0x1f) {
1219 tlb_lli_2m = 1024;
1220 } else {
1221 cpuid(0x80000005, &eax, &ebx, &ecx, &edx);
1222 tlb_lli_2m = eax & 0xff;
1223 }
1224 } else
1225 tlb_lli_2m = eax & mask;
1226
1227 tlb_lli_4m = tlb_lli_2m >> 1;
1228
1229 /* Max number of pages INVLPGB can invalidate in one shot */
1230 if (cpu_has(c, X86_FEATURE_INVLPGB))
1231 invlpgb_count_max = (cpuid_edx(0x80000008) & 0xffff) + 1;
1232 }
1233
1234 static const struct cpu_dev amd_cpu_dev = {
1235 .c_vendor = "AMD",
1236 .c_ident = { "AuthenticAMD" },
1237 #ifdef CONFIG_X86_32
1238 .legacy_models = {
1239 { .family = 4, .model_names =
1240 {
1241 [3] = "486 DX/2",
1242 [7] = "486 DX/2-WB",
1243 [8] = "486 DX/4",
1244 [9] = "486 DX/4-WB",
1245 [14] = "Am5x86-WT",
1246 [15] = "Am5x86-WB"
1247 }
1248 },
1249 },
1250 .legacy_cache_size = amd_size_cache,
1251 #endif
1252 .c_early_init = early_init_amd,
1253 .c_detect_tlb = cpu_detect_tlb_amd,
1254 .c_bsp_init = bsp_init_amd,
1255 .c_init = init_amd,
1256 .c_x86_vendor = X86_VENDOR_AMD,
1257 };
1258
1259 cpu_dev_register(amd_cpu_dev);
1260
1261 static DEFINE_PER_CPU_READ_MOSTLY(unsigned long[4], amd_dr_addr_mask);
1262
1263 static unsigned int amd_msr_dr_addr_masks[] = {
1264 MSR_F16H_DR0_ADDR_MASK,
1265 MSR_F16H_DR1_ADDR_MASK,
1266 MSR_F16H_DR1_ADDR_MASK + 1,
1267 MSR_F16H_DR1_ADDR_MASK + 2
1268 };
1269
amd_set_dr_addr_mask(unsigned long mask,unsigned int dr)1270 void amd_set_dr_addr_mask(unsigned long mask, unsigned int dr)
1271 {
1272 int cpu = smp_processor_id();
1273
1274 if (!cpu_feature_enabled(X86_FEATURE_BPEXT))
1275 return;
1276
1277 if (WARN_ON_ONCE(dr >= ARRAY_SIZE(amd_msr_dr_addr_masks)))
1278 return;
1279
1280 if (per_cpu(amd_dr_addr_mask, cpu)[dr] == mask)
1281 return;
1282
1283 wrmsrq(amd_msr_dr_addr_masks[dr], mask);
1284 per_cpu(amd_dr_addr_mask, cpu)[dr] = mask;
1285 }
1286
amd_get_dr_addr_mask(unsigned int dr)1287 unsigned long amd_get_dr_addr_mask(unsigned int dr)
1288 {
1289 if (!cpu_feature_enabled(X86_FEATURE_BPEXT))
1290 return 0;
1291
1292 if (WARN_ON_ONCE(dr >= ARRAY_SIZE(amd_msr_dr_addr_masks)))
1293 return 0;
1294
1295 return per_cpu(amd_dr_addr_mask[dr], smp_processor_id());
1296 }
1297 EXPORT_SYMBOL_FOR_KVM(amd_get_dr_addr_mask);
1298
zenbleed_check_cpu(void * unused)1299 static void zenbleed_check_cpu(void *unused)
1300 {
1301 struct cpuinfo_x86 *c = &cpu_data(smp_processor_id());
1302
1303 zen2_zenbleed_check(c);
1304 }
1305
amd_check_microcode(void)1306 void amd_check_microcode(void)
1307 {
1308 if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD)
1309 return;
1310
1311 if (cpu_feature_enabled(X86_FEATURE_ZEN2))
1312 on_each_cpu(zenbleed_check_cpu, NULL, 1);
1313 }
1314
1315 static const char * const s5_reset_reason_txt[] = {
1316 [0] = "thermal pin BP_THERMTRIP_L was tripped",
1317 [1] = "power button was pressed for 4 seconds",
1318 [2] = "shutdown pin was tripped",
1319 [4] = "remote ASF power off command was received",
1320 [9] = "internal CPU thermal limit was tripped",
1321 [16] = "system reset pin BP_SYS_RST_L was tripped",
1322 [17] = "software issued PCI reset",
1323 [18] = "software wrote 0x4 to reset control register 0xCF9",
1324 [19] = "software wrote 0x6 to reset control register 0xCF9",
1325 [20] = "software wrote 0xE to reset control register 0xCF9",
1326 [21] = "ACPI power state transition occurred",
1327 [22] = "keyboard reset pin KB_RST_L was tripped",
1328 [23] = "internal CPU shutdown event occurred",
1329 [24] = "system failed to boot before failed boot timer expired",
1330 [25] = "hardware watchdog timer expired",
1331 [26] = "remote ASF reset command was received",
1332 [27] = "an uncorrected error caused a data fabric sync flood event",
1333 [29] = "FCH and MP1 failed warm reset handshake",
1334 [30] = "a parity error occurred",
1335 [31] = "a software sync flood event occurred",
1336 };
1337
print_s5_reset_status_mmio(void)1338 static __init int print_s5_reset_status_mmio(void)
1339 {
1340 void __iomem *addr;
1341 u32 value;
1342 int i;
1343
1344 if (!cpu_feature_enabled(X86_FEATURE_ZEN))
1345 return 0;
1346
1347 addr = ioremap(FCH_PM_BASE + FCH_PM_S5_RESET_STATUS, sizeof(value));
1348 if (!addr)
1349 return 0;
1350
1351 value = ioread32(addr);
1352
1353 /* Value with "all bits set" is an error response and should be ignored. */
1354 if (value == U32_MAX) {
1355 iounmap(addr);
1356 return 0;
1357 }
1358
1359 /*
1360 * Clear all reason bits so they won't be retained if the next reset
1361 * does not update the register. Besides, some bits are never cleared by
1362 * hardware so it's software's responsibility to clear them.
1363 *
1364 * Writing the value back effectively clears all reason bits as they are
1365 * write-1-to-clear.
1366 */
1367 iowrite32(value, addr);
1368 iounmap(addr);
1369
1370 for (i = 0; i < ARRAY_SIZE(s5_reset_reason_txt); i++) {
1371 if (!(value & BIT(i)))
1372 continue;
1373
1374 if (s5_reset_reason_txt[i]) {
1375 pr_info("x86/amd: Previous system reset reason [0x%08x]: %s\n",
1376 value, s5_reset_reason_txt[i]);
1377 }
1378 }
1379
1380 return 0;
1381 }
1382 late_initcall(print_s5_reset_status_mmio);
1383