Lines Matching full:set
42 Set the maximum number of allowed I/O queue pairs. This replaces the
49 Set the Maximum Data Transfer Size of the device.
53 Vendor ID. Set this to ``on`` to revert to the unallocated Intel ID
85 Explicitly set the namespace identifier.
88 Set the UUID of the namespace. This will be reported as a "Namespace UUID"
92 Set the NGUID of the namespace. This will be reported as a "Namespace Globally
99 Set the EUI-64 of the namespace. This will be reported as a "IEEE Extended
129 subsystem. If set to ``off``, the namespace will remain a private namespace
135 If set to ``on``, the namespace will be be available in the subsystem, but
136 not attached to any controllers initially. A shared namespace with this set
169 enabled by the host). Set this to ``on`` to behave as a v1.3 device wrt. the
180 Set the Maximum Single Source Range Length (``MSSRL``). This is the maximum
184 Set the Maximum Copy Length (``MCL``). This is the maximum number of logical
189 Set the Maximum Source Range Count (``MSRC``). This is the maximum number of
195 A namespaces may be "Zoned" as defined by TP 4053 ("Zoned Namespaces"). Set
208 Set the Zone Descriptor Extension Size (``ZDES``). Must be a multiple of 64
212 Set to ``on`` to allow reads to cross zone boundaries.
215 Set the maximum number of active resources (``MAR``). The default (``0``)
219 Set the maximum number of open resources (``MOR``). The default (``0``)
224 Set the maximum data transfer size for the Zone Append command. Like
246 Set the number of Reclaim Groups.
249 Set the number of Reclaim Unit Handles. This is a mandatory parameter and
253 Set the Reclaim Unit Nominal Size. Defaults to 96 MiB.
274 Set to ``1`` to enable extended LBAs.
287 Controls the location of the protection information within the metadata. Set
294 format (``pif=0``). Set to ``2`` to enable 64 bit guard protection
334 The simplest possible invocation enables the capability to set up one VF
366 * assign the flexible resources to the VF and set it ONLINE