Lines Matching full:you

6 more buses for children.  You can specify a device's parent bus with
45 The new way keeps the parts separate: you create the host part with
55 Instead of bus=BUS,unit=UNIT, you can also say index=IDX.
95   As for all PCI devices, you can add bus=PCI-BUS,addr=DEVFN to
109   Without any -device floppy,... you get an empty unit 0 and no unit
110   1.  You can use -nodefaults to suppress the default unit 0, see
117   This lets you control PCI device class and MSI-X vectors.
122   As for all PCI devices, you can add bus=PCI-BUS,addr=DEVFN to
156 The new way keeps the parts separate: you create the host part with
176   This lets you control I/O ports and IRQs.
180   This lets you control I/O ports and IRQs.
183   uses "braille".  With -device, this useful default is gone, so you
227   general multiplexing instead: you can connect up to four users to a
228   single host part.  You need to pass mux=on to -chardev to enable
233 user,guestfwd=...  You can use chardev:CHR-ID in place of
254 DEVNAME equals MODEL, except for virtio you have to name the virtio
256 you have to use usb-net.
260 For PCI devices, you can add bus=PCI-BUS,addr=DEVFN to control the PCI
264 For virtio-net-pci, you can control whether or not ioeventfd is used for
293 As for all PCI devices, you can add bus=PCI-BUS,addr=DEVFN to control
330 For PCI devices, you can add bus=PCI-BUS,addr=DEVFN to control the PCI
359 The new way is -device DEVNAME.  For PCI devices, you can add
400 It is *not* suppressed by configuring a NIC with -device (you may call