Lines Matching full:host
24 | #5 Host's VGA ranges are mapped to IGD | | | * | |
28 use the VBT copied from host OpRegion to prevent incorrect configuration.
30 For #1, the "x-igd-opregion=on" option exposes a copy of host IGD OpRegion to
33 For #2, "x-igd-lpc=on" option copies the IDs of host LPC bridge and host bridge
40 For #4, the primary display must be set to IGD in host BIOS.
69 For either mode, depending on the host kernel, the i915 driver in the host
72 such driver binding unless the host driver is known to work well for this.
73 There are numerous ways to do this, i915 can be blacklisted on the host,
75 to the device on the host[2], virsh nodedev-detach can be used to bind the
78 graphics in the host and special options may be required beyond simply
82 video=efifb:off (depending on host BIOS/UEFI) or these can be combined to
87 are a good indicator that such a problem exists. The host files /proc/iomem
106 Copy host IGD OpRegion and expose it to guest with fw_cfg
109 Creates a dummy LPC bridge at 00:1f:0 with host VID/DID (i440fx only)
115 Overriding DSM region size in GGC register, 0 means uses host value.
117 'DVMT Pre-Allocated' option in host BIOS.
123 -device vfio-pci,host=00:02.0,id=hostdev0,addr=2.0
127 …-device vfio-pci,host=00:02.0,id=hostdev0,addr=2.0,x-igd-legacy-mode=off,x-igd-lpc=on,romfile=efi_…
183 customer, or you can try extracting it from your host firmware using
198 Set the host physical address bits to IOMMU address width using
199 -cpu host,host-phys-bits-limit=<IOMMU address width>
238 IGD Addr Space Host Addr Space Guest Addr Space
253 | | (Host) |
254 +------------>+-------------+<--Host BDSM
256 Passthrough | | Programmed by host FW