docs/devel/clocks.rst

23 example it is possible to create a clock outside of any device to
26 Here is an example of clocks::
101 As an example, the following creates 2 clocks to a device: one input and one
152 change (for example the main clock source of a board), then you'll have
202 get the clock inputs or outputs of a device. For example:
224 device clock.  For example, to connect the input clock ``clk2`` of
257 In the above example, when *Clock 1* is updated by *Device A*, three
298 object during device instance init. For example:
339 Here is an example, which assumes that ``clock_callback`` has been
415 For example, let's say that we have an output clock *clkout* and we
456 For example, if device B is a child of device A,
476 only adds a link to the existing clock. In the above example, object B
479 diagram describes the example with an input clock::
503 This is typically used to migrate an input clock state. For example: