testing/ktest/ktest.pl

600 sub doprint {  subroutine
701 	doprint "$hours hour";
702 	doprint "s" if ($hours > 1);
703 	doprint " ";
707 	doprint "$minutes minute";
708 	doprint "s" if ($minutes > 1);
709 	doprint " ";
712     doprint "$time second";
713     doprint "s" if ($time != 1);
717     doprint "\n";
719 	doprint "Build time:   ";
721 	doprint "\n";
724 	doprint "Install time: ";
726 	doprint "\n";
729 	doprint "Reboot time:  ";
731 	doprint "\n";
734 	doprint "Test time:    ";
736 	doprint "\n";
739 	doprint "\n*** WARNING";
740 	doprint "S" if ($warning_found > 1);
741 	doprint " found in build: $warning_found ***\n\n";
823 		doprint "WARNING: $var returned an error\n";
1451 	doprint("$name changed from '$old_option' to '$option'\n");
1489 	doprint("power cycle\n");
1534 	    doprint "Reboot did not finish. Forcing power cycle\n";
1590     doprint "CRITICAL FAILURE... [TEST $i] ", @_, "\n";
1593 	doprint "REBOOTING\n";
1596 	doprint "POWERING OFF\n";
1715     doprint "kill child process $pid\n";
1718     doprint "wait for child process $pid to exit\n";
1759     doprint "** Wait for monitor to settle down **\n";
1769 	    doprint "wait for monitor detected $stop\n";
1800 	    doprint "Exiting monitor flush due to hitting MAX_MONITOR_WAIT\n";
1848     doprint "*** Saved info to $dir ***\n";
1857     doprint "FAILED\n";
1863 	doprint "REBOOTING\n";
1875     doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n";
1876     doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n";
1877     doprint "KTEST RESULT: TEST $i$name Failed: ", @_, "\n";
1878     doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n";
1879     doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n";
1913     doprint("$command ... ");
1927 	    doprint "\n";
1943 		doprint "Hit timeout of $timeout, killing process\n";
1970 	doprint "[1 second] ";
1972 	doprint "[$delta seconds] ";
1980 	doprint "FAILED!\n";
1982 	doprint "SUCCESS\n";
2029     doprint "Find $reboot_type menu ... ";
2061     doprint "$grub_number\n";
2177     doprint "git rev-list --max-count=1 $commit ... ";
2184 	doprint "FAILED\n";
2226 		doprint "bug timed out after $booted_timeout seconds\n";
2227 		doprint "Test forced to stop after $stop_after_failure seconds after failure\n";
2234 		doprint "Successful boot found: break after $booted_timeout second$s\n";
2241 		doprint "Timed out after $timeout second$s\n";
2246 	doprint $line;
2261 		doprint "Test forced to stop after $stop_after_success seconds after success\n";
2285 		doprint "Test forced to stop after $stop_after_failure seconds after failure\n";
2307 		doprint "Already booted in Linux kernel $version, but now\n";
2308 		doprint "we booted into Linux kernel $1.\n";
2309 		doprint "Assuming that this is a triple fault.\n";
2310 		doprint "To disable this: set DETECT_TRIPLE_FAULT to 0\n";
2321 		doprint "STOP_TEST_AFTER ($stop_test_after seconds) timed out\n";
2343 	doprint "WARNING: Call Trace detected but ignored due to IGNORE_ERRORS=1\n";
2410 	doprint "No modules needed\n";
2448     doprint "$make kernelrelease ... ";
2452 	doprint "$make kernelrelease ... ";
2456     doprint "$version\n";
2590     doprint "Applying minimum configurations into $output_config.new\n";
2625 	doprint "olddefconfig failed, trying make oldnoconfig\n";
2627 	    doprint "oldnoconfig failed, trying yes '' | make oldconfig\n";
2639     doprint "Loading force configs from $config\n";
2778     doprint "\n\n";
2779     doprint "*******************************************\n";
2780     doprint "*******************************************\n";
2781     doprint "KTEST RESULT: TEST $i$name SUCCESS!!!!   **\n";
2782     doprint "*******************************************\n";
2783     doprint "*******************************************\n";
2790 	doprint "Reboot and wait $sleep_time seconds\n";
2801 	doprint "Pass, fail, or skip? [p/f/s]";
2844     doprint "run test $run_test\n";
2862 	    doprint $line;
2883 	doprint "WARNING: Call Trace detected but ignored due to IGNORE_ERRORS=1\n";
2892 		doprint $line;
2900 	doprint "Detected kernel crash!\n";
2958     doprint "$command ... ";
2966 	doprint "FAILED\n";
2970     doprint "SUCCESS\n";
2972 	doprint "$1 [$2]\n";
2975 	doprint "Found bad commit... $1\n";
2986     doprint "Reboot and sleep $bisect_sleep_time seconds\n";
3061 	    doprint("Running bisect trial $t of $bisect_tries:\n");
3082 	doprint "HIT A BAD COMMIT ... SKIPPING\n";
3121 	doprint "Performing a reverse bisect (bad is good, good is bad!)\n";
3161 	    doprint "TESTING BISECT BAD [$bad]\n";
3173 	    doprint "TESTING BISECT GOOD [$good]\n";
3221     doprint "Bad commit was [$bisect_bad_commit]\n";
3229     doprint "Reading configs from $config\n";
3275     doprint "Saving configs into $file\n";
3288     doprint "Creating old config from $name configs\n";
3314     doprint "\n\n***************************************\n";
3315     doprint "No more config bisecting possible.\n";
3317     doprint "***************************************\n\n";
3342 	doprint "NEW GOOD CONFIG ($pass)\n";
3348 	doprint "NEW BAD CONFIG ($pass)\n";
3372 	doprint "No config specified, checking if defconfig works";
3389 	    doprint "loc = $loc\n";
3401     doprint "Disabling 'MIN_CONFIG' for this test\n";
3422     doprint "Run good configs through make oldconfig\n";
3428     doprint "Run bad configs through make oldconfig\n";
3436 	    doprint "Testing bad config\n";
3445 	    doprint "Testing good config\n";
3477     doprint "Reboot and sleep $patchcheck_sleep_time seconds\n";
3555     doprint("Going to test the following commits:\n");
3560 	doprint "$l\n";
3564 	doprint("\nSkipping the following commits:\n");
3569 	    doprint "$l\n";
3588 	    doprint "\nSkipping \"$item\"\n\n";
3592 	doprint "\nProcessing commit \"$item\"\n\n";
3672 	doprint "file $kconfig does not exist, skipping\n";
3764 	doprint "Could not find arch from config file\n";
3765 	doprint "no dependencies used\n";
3783 	    doprint "No idea what arch dir $orig is for\n";
3784 	    doprint "no dependencies used\n";
3889     doprint "disabling config $config did not change .config\n";
3919 	    doprint "Using $output_minconfig as MIN_CONFIG\n";
3922 	    doprint "Set to still use MIN_CONFIG as starting point\n";
3956     doprint "Load initial configs from $start_minconfig\n";
3979 	    doprint "$config set by $file ... ignored\n";
3989 		doprint "$config is in allnoconfig as '$config_ignore{$config}'";
3990 		doprint " but it is '$min_configs{$config}' in minconfig .. keeping\n";
3993 		doprint "$config set by allnoconfig ... ignored\n";
4053 	    doprint "No more configs found that we can disable\n";
4061 	doprint "Test with $config disabled\n";
4081 	    doprint "$min_configs{$config} is needed to boot the box... keeping\n";
4101 	    doprint "$config is not needed, disabling\n";
4111 		    doprint "$config is not set, disabling\n";
4131 	doprint "Reboot and wait $sleep_time seconds\n";
4285 	    doprint "No email sent: email or mailer not specified in config.\n";
4424 doprint "\n\nSTARTING AUTOMATED TESTS\n\n";
4429 	doprint "DEFAULT OPTIONS:\n";
4431 	doprint "\nTEST $i OPTIONS";
4434 	    doprint " ITERATE $repeat";
4436 	doprint "\n";
4446 	doprint "$option = $opt{$option}\n";
4494 	    doprint "\n";
4567     doprint "\n\n";
4573 …  doprint "RUNNING TEST $i of $opt{NUM_TESTS}$name with option $test_type $run_type$installme\n\n";
4576     doprint "BUILD_DIR=$builddir\n";
4577     doprint "OUTPUT_DIR=$outputdir\n\n";
4677 doprint "\n    $successes of $opt{NUM_TESTS} tests were successful\n\n";