Lines Matching full:support
7 tristate "Support for frame buffer device drivers"
33 This enables support for native frame buffer device (fbdev) drivers.
35 The DRM subsystem provides support for emulated frame buffer devices
65 tristate "Aeroflex Gaisler framebuffer support"
69 This enables support for the SVGACTRL framebuffer in the GRLIB IP library from Aeroflex Gaisler.
72 tristate "Cirrus Logic support"
79 This enables support for Cirrus Logic GD542x/543x based boards on
82 If you have a PCI-based system, this enables support for these
91 tristate "Permedia2 support"
115 Support the Permedia2 FIFO disconnect feature.
118 bool "Acorn VIDC support"
127 tristate "CLPS711X LCD support"
138 bool "SA-1100 LCD support"
150 tristate "Freescale i.MX1/21/25/27 LCD support"
159 tristate "CyberPro 2000/2010/5000 support"
163 This enables support for the Integraphics CyberPro 20x0 and 5000
169 bool "DDC for CyberPro support"
174 Say Y here if you want DDC support for your CyberPro graphics
175 card. This is only I2C bus support, driver does not use EDID.
178 bool "CyberPro 2000/2010/5000 I2C support"
183 Enable support for the I2C video decoder interface on the
202 tristate "Amiga native chipset support"
213 bool "Amiga OCS chipset support"
216 This enables support for the original Agnus and Denise video chips,
221 bool "Amiga ECS chipset support"
224 This enables support for the Enhanced Chip Set, found in later
230 bool "Amiga AGA chipset support"
233 This enables support for the Advanced Graphics Architecture (also
239 bool "Amiga FrameMaster II/Rainbow II support"
247 tristate "Arc Monochrome LCD board support"
251 This enables support for the Arc Monochrome LCD board. The board
260 bool "Atari native chipset support"
271 tristate "Open Firmware frame buffer device support"
278 Say Y if you want support with Open Firmware for your graphics
282 bool "Apple \"control\" display support"
291 bool "Apple \"platinum\" display support"
300 bool "Apple \"valkyrie\" display support"
309 bool "Chips 65550 display support"
317 bool "Asiliant (Chips) 69000 display support"
324 bool "IMS Twin Turbo display support"
334 tristate "VGA 16-color graphics support"
351 tristate "HP STI frame buffer device support"
371 bool "Generic Macintosh display support"
384 tristate "TGA/SFB+ framebuffer support"
408 tristate "Userspace VESA VGA graphics support"
425 bool "VESA VGA graphics support"
437 bool "EFI-based Framebuffer Support"
445 your platform is EFI 1.10 or UEFI 2.0, select Y to add support for
449 tristate "N411 Apollo/Hecuba devkit support"
453 This enables support for the Apollo display controller in its
457 tristate "Hercules mono graphics support"
470 bool "SGI Graphics Backend frame buffer support"
490 Say Y if you want support for SBUS or UPA based frame buffer device.
500 bool "BWtwo support"
507 bool "CGthree support"
514 bool "CGsix (GX,TurboGX) support"
524 bool "Creator/Creator3D/Elite3D support"
534 bool "TCX (SS4/SS5 only) support"
542 bool "CGfourteen (SX) support"
550 bool "P9100 (Sparcbook 3 only) support"
558 bool "Leo (ZX) support"
566 bool "Sun XVR-500 3DLABS Wildcat support"
580 bool "Sun XVR-2500 3DLABS Wildcat support"
591 bool "Sun XVR-1000 support"
601 tristate "NEC PowerVR 2 display support"
624 tristate "OpenCores VGA/LCD core 2.0 framebuffer support"
628 This enables support for the OpenCores VGA/LCD core.
638 tristate "Epson S1D13XXX framebuffer support"
645 Support for S1D13XXX framebuffer device family (currently only
650 tristate "AT91 LCD Controller support"
659 This enables support for the AT91 LCD Controller.
662 tristate "nVidia Framebuffer Support"
680 bool "Enable DDC Support"
684 This enables I2C support for nVidia Chipsets. This is used
701 bool "Support for backlight control"
710 tristate "nVidia Riva support"
728 bool "Enable DDC Support"
732 This enables I2C support for nVidia Chipsets. This is used
749 bool "Support for backlight control"
758 tristate "Intel740 support"
768 tristate "Intel 810/815 support"
807 bool "Enable DDC Support"
811 Add DDC/I2C support for i810fb. This will allow the driver to get
839 bool "Millennium I/II support"
849 bool "Mystique support"
859 bool "G100/G200/G400/G450/G550 support"
868 If you need support for G400 secondary head, you must say Y to
869 "Matrox I2C support" and "G400 second head support" right below.
889 tristate "Matrox I2C support"
906 tristate "G400 second head support"
910 WARNING !!! This support does not work with G450 !!!
938 tristate "ATI Radeon display support"
952 bool "DDC/I2C for ATI Radeon support"
957 Say Y here if you want DDC/I2C support for your Radeon board.
960 bool "Support for backlight control"
977 tristate "ATI Rage128 display support"
990 bool "Support for backlight control"
999 tristate "ATI Mach64 display support" if PCI || ATARI
1015 bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support"
1018 Say Y here to support use of ATI's 64-bit Rage boards (or other
1020 framebuffer device. The ATI product support page for these boards
1021 is at <http://support.ati.com/products/pc/mach64/mach64.html>.
1024 bool "Mach64 generic LCD support"
1031 bool "Mach64 GX support" if PCI
1035 Say Y here to support use of the ATI Mach64 Graphics Expression
1037 framebuffer device. The ATI product support page for these boards
1039 <http://support.ati.com/products/pc/mach64/graphics_xpression.html>.
1042 bool "Support for backlight control"
1051 tristate "S3 Trio/Virge support"
1066 bool "DDC for S3 support"
1071 Say Y here if you want DDC support for your S3 graphics card.
1074 tristate "S3 Savage support"
1092 bool "Enable DDC2 Support"
1096 This enables I2C support for S3 Savage Chipsets. This is used
1108 This option will compile in console acceleration support. If
1113 tristate "SiS/XGI display support"
1130 bool "SiS 300 series support"
1133 Say Y here to support use of the SiS 300/305, 540, 630 and 730.
1136 bool "SiS 315/330/340 series and XGI support"
1139 Say Y here to support use of the SiS 315, 330 and 340 series
1144 tristate "VIA UniChrome (Pro) and Chrome9 display support"
1183 tristate "NeoMagic display support"
1199 tristate "IMG Kyro support"
1210 tristate "3Dfx Banshee/Voodoo3/Voodoo5 display support"
1233 bool "Enable DDC/I2C support"
1238 Say Y here if you want DDC/I2C support for your 3dfx Voodoo3.
1241 tristate "3Dfx Voodoo Graphics (sst1) support"
1254 options and other important info support.
1257 tristate "VIA VT8623 support"
1272 tristate "Trident/CyberXXX/CyberBlade support"
1295 tristate "ARK 2000PV support"
1310 tristate "Permedia3 support"
1323 tristate "Fujitsu carmine frame buffer support"
1366 bool "VIA VT8500 framebuffer support"
1379 bool "Wondermedia WM8xxx-series frame buffer support"
1394 bool "VT8500/WM8xxx accelerated raster ops support"
1397 This adds support for accelerated raster operations on the
1403 tristate "HD64461 Frame Buffer support"
1413 tristate "PMAG-AA TURBOchannel framebuffer support"
1417 Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
1421 tristate "PMAG-BA TURBOchannel framebuffer support"
1425 Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
1429 tristate "PMAGB-B TURBOchannel framebuffer support"
1433 Support for the PMAGB-B TURBOchannel framebuffer card used mainly
1438 bool "Maxine (Personal DECstation) onboard framebuffer support"
1442 Support for the onboard framebuffer (1024x768x8) in the Personal
1447 bool "G364 frame buffer support"
1455 bool "Motorola 68328 native frame buffer support"
1459 Say Y here if you want to support the built-in frame buffer of
1463 tristate "PXA168/910 LCD framebuffer support"
1472 tristate "PXA LCD framebuffer support"
1489 bool "Support PXA27x/PXA3xx Overlay(s) as framebuffer"
1493 bool "PXA Smartpanel LCD support"
1505 supplied by the platform in order to support multiple
1523 tristate "Freescale DIU framebuffer support"
1532 tristate "SuperH Mobile LCDC framebuffer support"
1544 tristate "Samsung S3C framebuffer support"
1554 and S3C6410 support 4 hardware windows.
1556 Currently the support is only for the S3C6400 and S3C6410 SoCs.
1565 tristate "Silicon Motion SM501 framebuffer support"
1583 tristate "SMSC UFX6000/7000 USB Framebuffer support"
1595 tristate "Displaylink USB Framebuffer support"
1607 tristate "Framebuffer support for IBM GXT4000P/4500P/6000P/6500P adaptors"
1611 Say Y here to enable support for the IBM GXT4000P/6000P and
1622 Include support for the virtual frame buffer in the PS3 platform.
1635 tristate "Xilinx frame buffer support"
1639 Include support for the Xilinx ML300/ML403 reference design
1652 tristate "Cobalt server LCD frame buffer support"
1657 tristate "SH7760/SH7763/SH7720/SH7721 LCDC support"
1662 Support for the SH7760/SH7763/SH7720/SH7721 integrated
1670 tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
1690 tristate "Xen virtual frame buffer support"
1701 tristate "E-Ink Metronome/8track controller support"
1705 This driver implements support for the E-Ink Metronome
1710 tristate "Fujitsu MB862xx GDC support"
1725 This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
1734 Framebuffer support for Fujitsu Lime GDC on host CPU bus.
1739 bool "Support I2C bus on MB862XX GDC"
1745 driver to support accessing I2C devices on controller's I2C bus.
1749 tristate "EP93XX frame buffer support"
1765 tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
1769 This driver implements support for the E-Ink Broadsheet
1775 tristate "Simple framebuffer support"
1781 Say Y if you want support for a simple frame-buffer.
1791 tristate "Solomon SSD1307 framebuffer support"
1798 This driver implements support for the Solomon SSD1307
1802 tristate "Silicon Motion SM712 framebuffer support"